Search NASA⌕ Search

SEARCH · Search NASA

Results for “PINCH DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Axial x-ray backlighting of wire-array Z-pinches using X pinches

For the first time, a geometry has been developed to allow for an axial imaging system for wire-array Z-pinch experiments that produce high-resolution x-ray images. The new geometry required a significant redesign of the electrode hardware. Calibrated areal density measurements of the Z-pinch plasma including wire cores, coronal plasma, streaming plasma, and the precursor were obtained. The system used eight-wire molybdenum (Mo) X pinches in series with and directly below the Z-pinch axis to provide micron-scale x-rays sources for point-projection radiography. The images formed on the x-ray sensitive film had a 15 mm diameter field of view at the center height of the array and a magnification of about 7.5:1. Titanium (Ti) filters in front of the film transmitted radiation in the spectral range of 3-5 keV. For calibration, a separate film with the same thickness Ti filter was placed the same distance from the X pinch. This film had an unobstructed path that bypasses the Z-pinch but included step wedges for calibration of the Z-pinch plasma. The step wedges had thicknesses of tungsten (W) ranging from 0.015 to 1.1 {mu}m to obtain areal density measurements of the W plasma from the wire-array. Images had subnanosecond temporal resolution and about 10 {mu}m spatial resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparisons of dense-plasma-focus kinetic simulations with experimental measurements

Dense-plasma-focus (DPF) Z-pinch devices are sources of copious high-energy electrons and ions, x rays, and neutrons. The mechanisms through which these physically simple devices generate such high-energy beams in a relatively short distance are not fully understood and past optimization efforts of these devices have been largely empirical. Previously we reported on fully kinetic simulations of a DPF and compared them with hybrid and fluid simulations of the same device. Here we present detailed comparisons between fully kinetic simulations and experimental data on a 1.2 kJ DPF with two electrode geometries, including neutron yield and ion beam energy distributions. A more intensive third calculation is presented which examines the effects of a fully detailed pulsed power driver model. We also compare simulated electromagnetic fluctuations with direct measurement of radiofrequency electromagnetic fluctuations in a DPF plasma. These comparisons indicate that the fully kinetic model captures the essential physics of these plasmas with high fidelity, and provide further evidence that anomalous resistivity in the plasma arises due to a kinetic instability near the lower hybrid frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of hybrid X-pinches

The dynamics of a new type of pinches—hybrid X-pinches (HXPs)—has been studied experimentally and numerically. The initial configuration of an HXP consists of a high-current diode with conical tungsten electrodes separated by a 1- to 3-mm-long gap and shunted with a 20- to 100-μm diameter wire. It was shown earlier that a hot spot (HS) with high plasma parameters also formed in the HXP, although its initial configuration is simpler than that of a standard X-pinch. Although details of the HXP dynamics still remain insufficiently studied, the main factors governing the HXP formation were investigated both experimentally and using magnetohydrodynamic simulations. The formation of a specific pressure profile in the electrode plasma after the wire explosion was investigated both experimentally and theoretically. It is shown that the effect of the pressure profile on the expanding wire plasma is similar for both standard X-pinches and HXPs, which allows one to assign them to the same class of loads of pulsed facilities. It is also established that the final stages of HS formation and the parameters of the HS plasma in standard X-pinches and HXPs are practically identical.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deflection of Plasma by High Magnetic Fields at Variable Pressures (Final Report)

The goal of the proposed work is to study the deflection of plasma by high magnetic fields using the high uniform magnetic field of the Magnetized Dusty Plasma Experiment (MDPX) located at the Magnetized Plasma Research Laboratory (MPRL) at Auburn University. The proposal team consists of faculty from the University of Alabama in Huntsville (UAH). One of the motivations for this work is to study the concept of a magnetic nozzle for pulsed fusion propulsion. Fusion propulsion can provide extremely high specific impulse, >30,000 sec, for fuel-efficient and thus mass-efficient trips to other planets. One such fusion propulsion design of interest in this research is the Pulsed Fission-Fusion (PuFF) concept. PuFF uses a Z-pinch device to create a fusion reaction at the back of the spacecraft inside the magnetic nozzle. As the resulting plasma explosion is isotropic, a large portion of the momentum will be directed toward the ship and needs to be redirected to efficiently produce thrust. The magnetic nozzle is thus necessary to redirect or deflect the plasma from an isotropic expansion into the directed thrust. Thus, the pulsed-fusion propulsion nozzle is herein referred to as a deflection magnetic nozzle, as opposed to the more traditional and well-studied accelerating magnetic nozzle. The purpose of this project was thus to study the behavior of a plasma in the MDPX fields to better understand the plasma-field interactions and how it could lead to deflection and a pulsed fusion magnetic nozzle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transient flow and heating characteristics in a pinched plasma column.

The generation of axial flow and heating of an argon plasma in a pinched plasma column of a pulsed, linear z-pinch device was examined experimentally and analytically. Transient (about 5 microsec) axial pressure profiles identify three characteristic periods in the column history. These include (1) strong axial pressure asymmetry indicative of plasma streaming, (2) isotropic, rapidly rising plasma pressure indicative of plasma heating, and (3) column breakup. An efficient conversion of radial collapse to axial streaming velocity is identified. Mechanisms for such an effect and subsequent heating are evaluated; significance to transients in pulsed plasma accelerators is identified.

York, T. M.↗

Collisional-rate coefficients for sodiumlike Ar VIII ions.

Determination of collisional-excitation-rate coefficients for sodium-like Ar VIII ions theoretically using the Coulomb-Born approximation as well as experimentally from the absolute intensities of lines emitted by these ions in well-diagnosed plasmas whose parameters were obtained from the analysis of scattered laser light. These plasmas were produced in a theta-pinch device. The agreement between theory and experiment is within the estimated accuracy of plus or minus 50% for excitation from the ground state to the n = 3 and n = 4 levels, whereas some deviations are observed for two transitions to the n = 5 levels at lower temperatures. A rate coefficient for ionization was obtained from the time dependence of the ionization.

Datla, R. U.↗

Transient flow and heating in a pinched plasma column

The axial flow and heating of an argon plasma in a pinched plasma column of a pulsed, linear z-pinch device was experimentally examined with a unique pressure sensing instrument capable of resolving mass flow properties. Transient axial pressure profiles identify periods of intense flow and heating. Mechanisms generating such effects are considered.

York, T. M.↗

On flares, substorms, and the theory of impulsive flux transfer events

Solar flares and magnetospheric substorms are discussed in the context of a general theory of impulsive flux transfer events (IFTE). IFTE theory, derived from laboratory observations in the Double Inverse Pinch Device (DIPD), provides a quantitative extension of 'neutral sheet' theories to include nonsteady field line reconnection. Current flow along the reconnection line increases with magnetic flux storage. When flux build-up exceeds the level corresponding to a critical limit on the current, instabilities induce a sudden transition in the mode of conduction. The resulting IFTE, indifferent to the specific modes and instabilities involved, is the more energetic, the lower the initial resistivity. It is the more violent, the greater the resulting resistivity increase and the faster its growth. Violent events can develop very large voltage transients along the reconnection line. Persistent build-up promoting conditions produce relaxation oscillations in the quantity of flux and energy stored (build-up-IFTE cycles). It is difficult to avoid the conclusion: flares and substorms are examples of IFTE.

Bratenahl, A.↗

Anisotropic magnetohydrodynamic turbulence in a strong external magnetic field

A strong external dc magnetic field introduces a basic anisotropy into incompressible magnetohydrodynamic turbulence. The modifications that this is likely to produce in the properties of the turbulence are explored for the high Reynolds number case. The conclusion is reached that the turbulent spectrum splits into two parts: an essentially two dimensional spectrum with both the velocity field and magnetic fluctuations perpendicular to the dc magnetic field, and a generally weaker and more nearly isotropic spectrum of Alfven waves. A minimal characterization of the spectral density tensors is given. Similarities to measurements from the Culham-Harwell Zeta pinch device and the UCLA Macrotor Tokamak are remarked upon, as are certain implications for the Belcher and Davis measurements of magnetohydrodynamic turbulence in the solar wind.

Montgomery, D.↗

Anisotropic magnetohydrodynamic turbulence in a strong external magnetic field

A strong external dc magnetic field introduces a basic anisotropy in incompressible MHD turbulence. The modifications that this is likely to produce in the properties of the turbulence are investigated for high Reynolds numbers. It is found that the turbulent spectrum splits into two parts: (1) an essentially two-dimensional spectrum with both the velocity field and the magnetic fluctuations perpendicular to the dc magnetic field, and (2) a generally weaker and more nearly isotropic spectrum of Alfven waves. These results are discussed in relation to measurements from the Culham-Harwell Zeta pinch device and the UCLA Macrorotor tokamak, as well as in relation to measurements of MHD turbulence in the solar wind.

Montgomery, D.↗

Physics of spinning gases and plasmas

Initially motivated by the problem of compression of spinning plasma in Z-pinch devices and related applications, the thesis explores a number of interesting smaller-scale problems related to physics of gas and plasma rotation. In particular, thermodynamics of ideal spinning gas is studied. It is found that rotation modifies the heat capacity of the gas and reduces the gas compressibility. It is also proposed that, by performing a series of measurement of external parameters of a spinning gas, one can infer the distribution of masses of gas constituents. It is also proposed how to use the rotation-dependent heat capacity for improving the thermodynamic efficiency of internal combustion engines. To that end, two possible engine embodiments are proposed and explored in detail. In addition, a transient piezothermal effect is discovered numerically and is given a theoretical explanation. The effect consists of the formation of a radial temperature gradient driven by gas heating or compression along the rotation axis. By elaborating on this idea, a theoretical explanation is proposed also for the operation of so-called vortex tubes, which so far have been lacking rigorous theory. Finally, adiabatic compression of spinning plasmas and ionized gases are considered, and the effect of the electrostatic interactions on the compressibility and heat capacity is predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches

The influence of an induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches is investigated. An axial magnetic field was induced in a novel Z-pinch load: a double planar wire array with skewed wires (DPWAsk), which represents a planar wire array in an open magnetic configuration. The induced axial magnetic field suppressed magneto-Rayleigh-Taylor (MRT) instabilities (with m = 0 and m = 1 instability modes) in the Z-pinch plasma. The influence of the initial axial magnetic field on the structure of the plasma column at stagnation was manifested through the formation of a more uniform plasma column compared to a standard double planar wire array (DPWA) load [V. L. Kantsyrev et al., Phys. Plasmas 15, 030704 (2008)]. The DPWAsk load is characterized by suppression of MRT instabilities and by the formation of the sub-keV radiation pulse that occurs before the main x-ray peak. Gradients in plasma parameters along the cathode-anode gap were observed and analyzed for DPWAsk loads made from low atomic number Z (Al) and mid-Z (brass) wires.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗