Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA BEAM INJECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Laser Plasma Accelerators for Medical and Nuclear Uses

Starting from the cases of the current clinical facilities as a source of reference to compare with, final performance of lasers and accelerators and even cost target were discussed. We assume maximum flexibility to enable treatment of small as well as large in-depth tumor volumes requiring the maximum energy of 250 MeV for protons and 400 MeV/u for carbon. We adopt their reference numbers for the required total number of protons / carbon ions per fraction (5 min) as well as peak numbers (per second). Other parameters (like energy spread and total number of voxels) are adjusted to the particularities of laser acceleration, which include a much higher production energy spread than in the synchrotron case and a laser pulse rate currently suggested by technology. As far as cost, it is assumed that a single laser driver unit is foreseen for one treatment room. It is suggested that the target for 10-20 years of development could be a cost of the laser driver unit not exceeding 1/4 of the conventional synchrotron facility cost, which is 40 MEuro. Further, design study, proposal and preliminary experimental results for all optical Compton scattering X-ray source for nuclear material detection at University of Tokyo is introduced. By using the Ti:Sapphire laser at about 7 TW and our original gas-jet and magnetic plasma channel, we succeeded in generating more than 100 MeV electrons with a reasonable emittance. Compton scattering with beam-spread Ti:Sapphire laser pulse can yield quasi-monochromatic X-rays around 110 keV near the K-edges of U, Np, Pu. Subtraction imaging across the K-edge realizes clear recognition and distingushment of those compounds in liquid.

43 PARTICLE ACCELERATORS↗

Producing multi-coloured bunches through beam-induced ionization injection in plasma wakefield accelerator

Our work discusses the properties of electron beams formed in plasma wakefield accelerators through ionization injection. Specifically, the potential for generating a beam composed of co-located multi-colour beamlets is demonstrated in the case where the ionization is initiated by the evolving charge field of the drive beam itself. The physics of the processes of ionization and injection are explored through OSIRIS simulations. Experimental evidence showing similar features are presented from the data obtained in the E217 experiment at the FACET facility of the SLAC National Laboratory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cesium Delivery System for Negative Ion Source at IPR

The technique of surface production of negative ions using cesium, Cs, has been efficiently exploited over the years for producing negative ion beams with increased current densities from negative ion sources used on neutral beam lines. Deposition of Cs on the source walls and the plasma grid lowers the work function and therefore enables a higher yield of H{sup -}, when hydrogen particles (H and/or H{sub x}{sup +}) strike these surfaces.A single driver RF based (100 kW, 1 MHz) negative ion source test bed, ROBIN, is being set up at IPR under a technical collaboration between IPR and IPP, Germany. The optimization of the Cs oven design to be used on this facility as well as multidriver sources is underway. The characterization experiments of such a Cs delivery system with a 1 g Cs inventory have been carried out using surface ionization technique. The experiments have been carried by delivering Cs into a vacuum chamber without plasma. The linear motion of the surface ionization detector, SID, attached with a linear motion feedthrough allows measuring the angular distribution of the Cs coming out of the oven. Based on the experimental results, a Cs oven for ROBIN has been proposed. The Cs oven design and experimental results of the prototype Cs oven are reported and discussed in the paper.

43 PARTICLE ACCELERATORS↗

Formation of high-{beta} plasma and stable confinement of toroidal electron plasma in Ring Trap 1

Formation of high-{beta} electron cyclotron resonance heating plasma and stable confinement of pure electron plasma have been realized in the Ring Trap 1 device, a magnetospheric configuration generated by a levitated dipole field magnet. The effects of coil levitation resulted in drastic improvements of the confinement properties, and the maximum local {beta} value has exceeded 70%. Hot electrons are major component of electron populations, and its particle confinement time is 0.5 s. Plasma has a peaked density profile in strong field region [H. Saitoh et al., 23rd IAEA Fusion Energy Conference EXC/9-4Rb (2010)]. In pure electron plasma experiment, inward particle diffusion is realized, and electrons are stably trapped for more than 300 s. When the plasma is in turbulent state during beam injection, plasma flow has a shear, which activates the diocotron (Kelvin-Helmholtz) instability. The canonical angular momentum of the particle is not conserved in this phase, realizing the radial diffusion of charged particles across closed magnetic surfaces. [Z. Yoshida et al., Phys Rev. Lett. 104, 235004 (2010); H. Saitoh et al., Phys. Plasmas 17, 112111 (2010).].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation and sustainment of field reversed configuration (FRC) plasmas by spheromak merging and neutral beam injection

This paper briefly reviews a compact toroid reactor concept that addresses critical issues for forming, stabilizing and sustaining a field reversed configuration (FRC) with the use of plasma merging, plasma shaping, conducting shells, neutral beam injection (NBI). In this concept, an FRC plasma is generated by the merging of counter-helicity spheromaks produced by inductive discharges and sustained by the use of neutral beam injection (NBI). Plasma shaping, conducting shells, and the NBI would provide stabilization to global MHD modes. Although a specific FRC reactor design is outside the scope of the present paper, an example of a promising FRC reactor program is summarized based on the previously developed SPIRIT (Self-organized Plasmas by Induction, Reconnection and Injection Techniques) concept in order to connect this concept to the recently achieved the High Performance FRC plasmas obtained by Tri Alpha Energy [Binderbauer et al, Phys. Plasmas 22,056110, (2015)]. This paper includes a brief summary of the previous concept paper by M. Yamada et al, Plasma Fusion Res. 2, 004 (2007) and the recent experimental results from MRX.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulations of turbulent plasma heating by powerful electron beams

Basic mechanisms of turbulent plasma heating by powerful electron beams are studied using numerical simulations. Both particle-in-cell and hybrid codes are used to investigate how beam-plasma instability evolves and saturates in the case of continuously injected electron beam. For sufficiently high plasma temperature beam driven turbulence is found to operate in the regime of the constant pump, when the saturation level of heating power is determined solely by the nonlinear interaction of beam particles with resonant waves and does not depend on the turbulence structure in the nonresonant part of the spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spacecraft charging potential during electron-beam injections into space plasmas

Injections of nonrelativistic electron beams from an infinite conductor have been simulated by using a two-dimensional electrostatic particle code to study the spacecraft charging potential. The simulations show that the conductor charging potential at the end of simulations does not vary with the beam density when the beam density exceeds four times the ambient density. The reflection coefficient, which determines a percentage of incident electrons reflected by the conductor, increases the charging potential. To charge the conductor to the beam energy, the reflection coefficient needs to be about 0.5. The results are applied to explain the spacecraft charging potential measured during the Sepac experiments on Spacelab 1.

Lin, Chin S.↗

Simultaneous measurement of core electron temperature and density fluctuations during electron cyclotron heating on DIII-D

New measurements show that long-wavelength (k{sub t}hetarho{sub s}<0.5) electron temperature fluctuations can play an important role in determining electron thermal transport in low-confinement mode (L-mode) tokamak plasmas. In neutral beam-heated L-mode tokamak plasmas, electron thermal transport and the amplitude of long-wavelength electron temperature fluctuations both increase in cases where local electron cyclotron heating (ECH) is used to modify the plasma profiles. In contrast, the amplitude of simultaneously measured long-wavelength density fluctuations does not significantly increase. Linear stability analysis indicates that the ratio of the trapped electron mode (TEM) to ion temperature gradient (ITG) mode growth rates increases in the cases with ECH. The increased importance of the TEM drive relative to the ITG mode drive in the cases with ECH may be associated with the increases in electron thermal transport and electron temperature fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extraction and Acceleration of Ions from an Ion-Ion Plasma

Extraction and acceleration of positive and negative ions from a strong electronegative plasma and from an ion-ion plasma is investigated in the PEGASES thruster, working with SF{sub 6}. The plasma is generated in a cylindrical quartz tube terminated by metallic endplates. The electrons are confined by a static magnetic field along the axis of the cylinder. The electron mobility along the field is high and the electrons are determining the sheaths in front of the endplates. The core plasma potential can therefore be controlled by the bias applied to the endplates. An ion-ion plasma forms at the periphery as a result of electron confinement and ions can freely diffuse along the perpendicular direction or extraction axis. Langmuir probe and RFEA measurements are carried out along this axis. The measured ion energy distributions shows a single peak centered around a potential consistent with the plasma potential and the peak position could be controlled with a positive voltage applied to the endplates. When the endplates are biased negatively, the plasma potential saturates and remained close to 15 V. A beam of negatively charged particles can be observed under certain conditions when the endplates were biased negatively.

43 PARTICLE ACCELERATORS↗

First measurement of time evolution of electron temperature profiles with Nd:YAG Thomson scattering system on Heliotron J

A Nd:YAG Thomson scattering system has been developed for Heliotron J. The system consists of two 550 mJ 50 Hz lasers, large collection optics, and 25 radial channel (∼1 cm spatial resolution) interference polychromators. This measurement system achieves a S/N ratio of ∼50 for low-density plasma (n{sub e} ∼ 0.5 × 10{sup 19} m{sup −3}). A time evolution of electron temperature profiles was measured with this system for a high-intensity gas-puff (HIGP) fueling neutral-beam-injection plasma. The peripheral temperature of the higher-density phase after HIGP recovers to the low-density pre-HIGP level, suggesting that improving particle transport in the HIGP plasma may be possible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast magnetization of a high-to-low-beta plasma beam

The magnetization of a high-beta (plasma energy density/magnetic-field energy density) hydrogen-plasma beam injected into a vacuum transverse magnetic field is studied experimentally. Nominal parameters were Ti = 1 eV, Te = 5 eV, n = 3 x 10 to the 13th/cu cm or less, v(i) = 7 x 10 to the 6th cm/sec or less, t(pulse) less than 70 microsec, and Bz = 300 G or less. Plasma characteristics were measured for a wide beam and a downstream distance, x = 300 rho(i) or less, where x is the downstream distance and rho(i) is the ion gyroradius. A brief initial state of diamagnetic propagation is observed, followed by magnetized propagation accompanied by beam compression transverse to B with as much as a factor of 4 increase in density and a slight drift of the beam in the ion Lorentz force direction.

Song, J. J.↗

A simulation study of radial expansion of an electron beam injected into an ionospheric plasma

Injections of nonrelativistic electron beams from a finite equipotential conductor into an ionospheric plasma have been simulated using a two-dimensional electrostatic particle code. The purpose of the study is to survey the simulation parameters for understanding the dependence of beam radius on physical variables. The conductor is charged to a high potential when the background plasma density is less than the beam density. Beam electrons attracted by the charged conductor are decelerated to zero velocity near the stagnation point, which is at a few Debye lengths from the conductor. The simulations suggest that the beam electrons at the stagnation point receive a large transverse kick and the beam expands radially thereafter. The buildup of beam electrons at the stagnation point produces a large electrostatic force responsible for the transverse kick. However, for the weak charging cases where the background plasma density is larger than the beam density, the radial expansion mechanism is different; the beam plasma instability is found to be responsible for the radial expansion. The simulations show that the electron beam radius for high spacecraft charging cases is of the order of the beam gyroradius, defined as the beam velocity divided by the gyrofrequency. In the weak charging cases, the beam radius is only a fraction of the beam gyroradius. The parameter survey indicates that the beam radius increases with beam density and decreases with magnetic field and beam velocity. The beam radius normalized by the beam gyroradius is found to scale according to the ratio of the beam electron Debye length to the ambient electron Debye length. The parameter dependence deduced would be useful for interpreting the beam radius and beam density of electron beam injection experiments conducted from rockets and the space shuttle.

Koga, J.↗

V-band frequency hopping microwave reflectometer in LHD

In order to measure the internal structure of fluctuation, the broadband frequency tunable system, which has the ability of fast and stable hopping operation, is applied in the Large Helical Device. One of the important issues of density fluctuation measurements using this reflectometer is the study of energetic particle driven magnetohydrodynamics instability. During one plasma discharge, the launching frequency changes from one frequency to another frequency, which this operation is called as frequency hopping, and the cutoff position can be scanned in the wide area. As a hopping source, a synthesizer is used because it has a quite stable and low phase noise. The frequency component of the source output is multiplied to V-band (50-75 GHz) region for plasma measurements in extraordinary mode polarization. Also this system has a heterodyne detection with single side band frequency modulation for sensitive phase and amplitude measurement. We can obtain the radial profile of Alfven eigenmodelike oscillation in a neutral beam injected plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interaction of an ultrashort laser pulse and relativistic electron beam in a corrugated plasma channel

Copropagation of a laser pulse and a relativistic electron beam in a corrugated plasma channel has been proposed for the direct laser acceleration of electrons [Palastro et al., Phys. Rev. E 77, 036405 (2008)]. The corrugated plasma channel allows for the guiding of laser pulses composed of subluminal spatial harmonics. Phase matching between the electron beam and the spatial harmonics results in acceleration, but for high beam densities, the pulse energy can be rapidly depleted. This depletion may result in interaction times shorter than the waveguide length limited time or pulse length dephasing time. We present an analytic model and self-consistent simulations of the electron beam-laser pulse interaction. A linear dispersion relation is derived. The effect of the electron beam on the pulse after the occurrence of axial bunching is examined. Injection of axially modulated electron beams is also explored. In particular, we find that a properly phased electron beam can transfer energy to the laser pulse as an inverse process to acceleration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Space plasma investigations on the First Spacelab Mission

A series of investigations was carried out during the First Spacelab Mission to study the space plasma environment from the Shuttle/Spacelab. The emphasis of the experiments was on the performance of particle injections from the Shuttle/Spacelab and studies of the ensuing effects on the orbiter, the near orbiter environment, and the earth's atmosphere. Results of these experiments, including electron beam injections, plasma injections, neutral injections, electron-plasma injections, electron-neutral injections, and ambient environmental measurements, are reviewed.

Roberts, W. T.↗

An analysis of the influence of impurities on fast particle attenuation and on fast ion spectral shape in LHD

Neutral particle fluxes measured by neutral particle analyzers can provide information about the ion temperature as well as the non-Maxwellian anisotropic ion distribution tails from neutral beam injection and ion cyclotron radio frequency heating. In the case of multidirectional diagnostics employing high resolution atomic energy spectrometers, the neutral atomic flux source is not localized in contrast to pellet charge exchange or diagnostic neutral beam methods. The correct interpretation of such measurements from plasma in a complex toroidally asymmetric geometry, like that of LHD, requires careful numerical modeling of the neutral flux formation. Previously a measured neutral flux calculation scheme was developed and was used for the LHD geometry and a suitable analytic expression for ionization cross sections {sigma}{sub s}{sup (z)}(E,n{sub e},T{sub e},Z{sub eff}) of impurities was formulated by Janev et al. [Nucl. Fusion 29, 2125 (1989)]. In this paper, the attenuation of fast particles by impurities is incorporated into the neutral flux calculation scheme and the influence of impurities on the calculated neutral flux spectra is shown. Finally, the behavior of the calculated and experimental suprathermal particle distributions is compared for pure hydrogen and for argon impurity seeded plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calibration of an advanced neutral particle analyzer for the Madison Symmetric Torus reversed-field pinch

A new E Parallel-To B neutral particle analyzer, which has recently been installed on Madison Symmetric Torus (MST) reversed-field pinch (RFP), has now been calibrated, allowing the measurement of the fast ion density and energy distribution. This diagnostic, dubbed the advanced neutral particle analyzer (ANPA), can simultaneously produce time resolved measurements of the efflux of both hydrogen and deuterium ions from the plasma over a 35 keV energy range with an energy resolution of 2-4 keV and a time resolution of 10 {mu}s. These capabilities are needed to measure both majority ion heating that occurs during magnetic reconnection events in MST and the behavior of the fast ions from the 1 MW hydrogen neutral beam injector on MST. Calibration of the ANPA was performed using a custom ion source that resides in the flight tube between the MST and the ANPA. In this work, the ANPA will be described, the calibration procedure and results will be discussed, and initial measurements of the time evolution of 25 keV neutral beam injection-born fast ions will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗