Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASTIC YIELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

EXPERIMENTAL VALIDATION OF THEORETICAL BURST STRENGTH SOLUTION FOR DEFECT-FREE THICK-WALLED PIPES

The burst pressure of line pipes is an important strength property required in pipeline design and integrity management. Historically, the Barlow formula in conjunction with the ultimate tensile stress (UTS) of pipeline steels were utilized to estimate the burst strength of line pipes. However, the Barlow formula did not consider the plastic flow effect for ductile steels and is applicable only to thin-walled pipes. In 2006, the present author proposed a new multiaxial plastic yield theory and obtained a theoretical Zhu-Leis solution of burst strength for defect-free thin-walled pipes in term of UTS and strain hardening exponent n of pipeline steels. The Zhu-Leis solution has been validated by various burst test data for thin-walled pipelines for a wide range of steel grades from Grade B to X120. Recently, the present author extended the Zhu-Leis theory of plasticity to thick-walled pipes and obtained the Zhu-Leis solution of burst pressure for thick-walled pipes. The proposed burst pressure solution is applicable to both thin and thick-walled pipes. To experimentally validate the proposed theoretical burst pressure solution, this paper obtains a set of burst test data for three thick-walled pipes in Grade B carbon steel with a nominal diameter of 2.375 inches and three nominal wall thicknesses, resulting in D/t = 15.4, 10.9, 6.9. Through comparisons, these burst data validate the theoretical burst pressure solution for thick-walled pipes. Moreover, two additional burst test datasets collected from literature for thin and thick-walled pipes further validate the proposed burst pressure solution for both thin and thick-walled pipes.

Zhu, Xiankui↗
DOE OSTI2022

An automated fast neutron computed tomography instrument with on-line focusing for non-destructive evaluation

A fast neutron tomography imaging instrument has been designed, built, and tested at The Ohio State University 500 kW Research Reactor on a fast neutron beamline with a peak neutron flux ≈5.4 × 107 n·cm−2·s−1 at 1.6 MeV median neutron energy. The instrument and beamline are also configurable for thermal neutron imaging. The imaging apparatus is composed of a lens coupled, water-cooled Electron Multiplying Charge Coupled Device camera, a front-surface mirror, and a high light yield plastic Polyvinyl toluene scintillator. The instrument sits on a mobile cart. A total of 5 motion-control stages are built into the system for XYZ and rotational degrees of freedom for sample positioning; the fifth stage fine tunes the focal distance between the camera and the scintillator to achieve on-line focusing. A Python code with a user-friendly graphical user interface controls the fully automated image acquisition, not requiring user interaction, yet facilitating tracking of the image acquisition. A complete fast neutron computed tomography dataset with 360 projections requires less than 3 h, with 30 s per projection. On-line focusing is accomplished with a commercial, off-the-shelf, dielectrically actuated liquid lens. Finally, tomographic reconstructions are visualized using the Livermore Tomography Tools software package. The effective pixel size (width and height) is ≈0.1058 mm, yielding a minimum voxel size of 0.1058 × 0.1058 × 0.1058 mm3, and produces a spatial resolution of 231 μm when calculated from knife-edge measurements.

Bisbee, M. G. (ORCID:0000000313466697)↗
DOE OSTI2025

Identifying the Best High‐Biomass Sorghum Hybrids Based on Biomass Yield Potential and Feedstock Quality Affected by Nitrogen Fertility Management Under Various Environments

The growing interest in high-biomass sorghum ( Sorghum bicolor L. Moench), hereafter referred to as sorghum, as a bioenergy feedstock in the United States requires an understanding of geographical adaptation to identify the most suitable hybrids for the Midwest. In this study, 13 sorghum hybrids (H1–H13) were evaluated for biomass yield potential in central and southern IL over two growing seasons (2022 and 2023). In addition to biomass yield, the effects of nitrogen (N) fertilization on yield, nutrient removal (N, P, and K), and feedstock composition (cellulose, hemicellulose, lignin, and soluble fractions) were determined to identify the best-performing sorghum hybrid across environmental gradients. The experimental design was a split-plot arrangement within a randomized complete block design with four replications at each of two locations: N rates (0 and 112 kg-N ha −1 ) as a whole plot factor and 13 sorghum hybrids as a subplot factor. As a result, complex genotypes (13 hybrids) by environment (2 sites and 2 years) and management (2 N rates) interactions were observed in biomass yield. The best hybrids at both sites were H1 (ATx2932/F10702_PSL) and H13 (TX08001), which were very photoperiod sensitive (PS). These hybrids produced superior biomass yield, and they also exhibited less nutrient removal and high energy-rich feedstock compositions (cellulose, hemicellulose, and lignin). Biomass yield potential was associated with morphological and phenological traits according to environmental conditions. Low-yielding hybrids were short-stature (H5 and H6) with pollinators (F10801_PSL-3dw and F10805_PSL-3dw) that are recessive at the Dw3 locus. Moderate PS hybrids (H7, H8, H11, and H12) that produced grain panicles at harvest showed high biomass yield plasticity and excessive nutrient removal as they accumulated high K concentrations in biomass tissues and high N and P in grain panicles.

09 BIOMASS FUELS↗
DOE OSTI2023

Understanding the transient large amplitude oscillatory shear behavior of yield stress fluids

A full understanding of the sequence of processes exhibited by yield stress fluids under large amplitude oscillatory shearing is developed using multiple experimental and analytical approaches. A novel component rate Lissajous curve, where the rates at which strain is acquired unrecoverably and recoverably are plotted against each other, is introduced and its utility is demonstrated by application to the analytical responses of four simple viscoelastic models. Using the component rate space, yielding and unyielding are identified by changes in the way strain is acquired, from recoverably to unrecoverably and back again. The behaviors are investigated by comparing the experimental results with predictions from the elastic Bingham model that is constructed using the Oldroyd–Prager formalism and the recently proposed continuous model by Kamani, Donley, and Rogers in which yielding is enhanced by rapid acquisition of elastic strain. The physical interpretation gained from the transient large amplitude oscillatory shear (LAOS) data is compared to the results from the analytical sequence of physical processes framework and a novel time-resolved Pipkin space. The component rate figures, therefore, provide an independent test of the interpretations of the sequence of physical processes analysis that can also be applied to other LAOS analysis frameworks. Each of these methods, the component rates, the sequence of physical processes analysis, and the time-resolved Pipkin diagrams, unambigiously identifies the same material physics, showing that yield stress fluids go through a sequence of physical processes that includes elastic deformation, gradual yielding, plastic flow, and gradual unyielding.

Kamani, Krutarth M. (ORCID:0000000338975420)↗
DOE OSTI2021

The mechanical response of micron-sized molecular crystals

Abstract Microstructures and corresponding properties of compacted powders ultimately depend on the mechanical response of individual particles. In principle, computational simulations can predict the results of powder compaction processes, but the selection of appropriate models for both particle–particle interactions and particle deformations across all relevant length scales remain nontrivial tasks, especially in material systems lacking detailed mechanical property information. The work presented here addresses these issues by conducting uniaxial compressions in situ inside of a scanning electron microscope to characterize the mechanical response of individual micron-sized particles of a molecular crystal, hexanitrohexaazaisowurtzitane (CL-20). This experimental approach enabled the collection of quantitative force and displacement data alongside simultaneous imaging to capture morphology changes. The results reveal information about elastic deformation, yield, plastic deformation, creep, and fracture phenomena. Accordingly, this work demonstrates a generalizable approach for assessing the mechanical response of individual micron-sized molecular crystal particles and utilizing those responses in particle-level models. Graphic abstract

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shear Band Formation in Thin-Film Multilayer Columns Under Compressive Loading: A Mechanistic Study

Micro-pillar compression is a popular experimental technique used for characterizing the mechanical behavior of nano- and micro-laminates. The compressive stress–strain response of the column-shaped thin-film composite can be measured, and the deformation and damage features can be revealed by post-test cross-section microscopy. The development of plastic instability in the form of localized strain concentration (shear bands), leading to eventual failure, is frequently observed. In the present study, a computational approach is used to illustrate the commonality of shear band formation from a continuum standpoint. Systematic finite element analyses are conducted, showing that the strain field tends to become localized once plastic yielding commences. Distinct shear offsets of the layered structure can be revealed from the numerical model, which is similar to those observed in experiments. The actual appearance of shear bands depends on the materials’ constitutive behavior and precise geometries. Post-yield strain hardening reduces the propensity of shear band formation, while strain softening enhances it. Imperfections such as the undulated layer geometry, as well as the frictional characteristics between the specimen and test apparatus, can also influence the shear band morphology and overall stress–strain response.

finite element modeling↗
NASA NTRS1970

New aspects of photoplasticity

Photoplastic material thickness change from mechanical and holographic measurements, showing correlation with isochromatics during plastic yielding

Brinson, H. F.↗
NASA NTRS1972

Correcting for nonlinear effects in fracture toughness testing.

Expressions for fracture toughness, which include nonlinear effects due to crack front plastic yield and possible small crack extension prior to fracture instability, are obtained for several test specimen configurations. Inclusion of such effects is based on a simple compliance type determination of the total energy rate at onset of fast fracture.

Liebowitz, H.↗
NASA NTRS1973

Seismic analysis of nuclear power plant structures

Primary structures for nuclear power plants are designed to resist expected earthquakes of the site. Two intensities are referred to as Operating Basis Earthquake and Design Basis Earthquake. These structures are required to accommodate these seismic loadings without loss of their functional integrity. Thus, no plastic yield is allowed. The application of NASTRAN in analyzing some of these seismic induced structural dynamic problems is described. NASTRAN, with some modifications, can be used to analyze most structures that are subjected to seismic loads. A brief review of the formulation of seismic-induced structural dynamics is also presented. Two typical structural problems were selected to illustrate the application of the various methods of seismic structural analysis by the NASTRAN system.

Go, J. C.↗
NASA NTRS1975

On fracture toughness in the nonlinear range

A general definition of fracture toughness is developed which is appropriate to situations of subcritical crack growth and/or large-scale crack border plastic yield. The theoretical basis as well as comparisons with other proposed measures of fracture toughness are discussed. A simple method is given for evaluating fracture toughness which is based on use of the load-displacement test record.

Eftis, J.↗
NASA NTRS1977

Biaxial load effects in fracture mechanics

It is found that the standard expressions for elastic stress and displacement in the crack-tip region (i.e., the so-called singular solution) cannot be considered to be approximations that are acceptable in a completely general sense. This conclusion is best illustrated by the instance of a biaxially loaded infinite sheet with a flat horizontal central crack, where the effect of load applied parallel to the plane of the crack appears entirely in the second terms of the series representations for local stresses and displacements. An elastoplastic finite-element analysis of the same biaxially loaded finite specimen geometry shows that the global energy release rate, the J-integral, the plastic stress and strain intensity factors (in the sense of Hilton and Hutchinson), and the size of the crack border region plastic yield, all have pronounced biaxial load dependence.

Liebowitz, H.↗
NASA NTRS1986

Drop testing and analysis of six-foot diameter graphite-epoxy frames

Graphite-epoxy frames were drop tested onto a concrete floor to simulate crash loadings. The frames have Z-shaped cross-sections typical of designs often proposed for fuselage structure of advanced composite transports. The 6-foot diameter of the frames was chosen to reduce specimen fabrication costs and to facilitate testing. Response of the frames from accelerometer, strain gage, and photographic measurements are presented which characterize the behavior under 25-30 fps vertical impact velocity onto concrete. Failure of the graphite-epoxy frames involved a complete separation through the cross section near the impact point. All damage to the composite frame was confined to an area close to the impact point. Failure of aluminum frames tested for comparison were different from the composite specimens. The aluminum frames yielded (plastic hinges formed) at several locations around the lower portion of the frame without failing completely across the section.

Boitnott, R. L.↗
NASA NTRS1987

Coatings for high-temperature bearings and seals

Criteria are discussed for predicting the probable lubricating ability of candidate solid materials from a consideration of their basic chemical and physical properties. The properties considered to be important in the model are thermochemical potential, adhesion, low hardness, plasticity, yield strength in shear, and brittle-to-ductile transition characteristics. A review of the selection and tribological testing of materials, which were selected for use in self-lubricating composite coatings by employing this model, is given. Two series of plasma-sprayed coatings with good tribological properties over a wide temperature spectrum are described. The PS 100 series of coatings contain oxidatively stable solid lubricants in a nichrome matrix. The PS 200 series contains the same solid lubricants in a very wear resistant metal-bonded chromium carbide matrix. Examples are given of applications of these coatings in high speed shaft seals, sliding contact bearings, and Stirling engine cylinder liners.

Sliney, Harold E.↗
NASA NTRS1991

Origin of periodically spaced wrinkle ridges on the Tharsis Plateau of Mars

The mechanism responsible for the periodic spacing of wrinkle ridges observed on the Tharsis Plateau of Mars is investigated by examining the characteristics of the spacing of ridges in six major provinces on the plateau; these regions were further divided into domains on the basis of ridge orientation. The ridges are interpreted to be folds resulting from buckling, followed by reverse to thrust faulting (flexure-fracture). Several buckling models that may account for the periodic nature of the ridges are analyzed. The model that would account for the periodic spacing and the asymmetric fold geometry of the ridges involves plastic yielding confined to the hinge area, that would result in rapid closing of the fold and, with continued horizontal shortening, the eventual development of reverse to thrust faulting.

Watters, Thomas R.↗
NASA NTRS1990

Micromechanical thermal analysis of interphase region in a titanium aluminide MMC

The high reactivity between the fiber and matrix in silicon carbide/titanium aluminide MMCs leads to the formation of brittle reaction products at the fiber/matrix (F/M) interface. Also, the high thermal expansion coefficient mismatch between the fiber and matrix leads to high tensile residual stresses at the F/M interface, and this can lead to premature cracking during cooldown. One solution to these problems is the use of a metallic fiber coating like Ta which acts as an F/M diffusion barrier and reacts with the matrix to form a beta stabilized compliant layer. A finite element micromechanics analysis was performed to study the effects of Ta and beta interphase layers on the thermal residual stresses during consolidation. A 5-micron-thick beta layer reduced cool-down stresses by 8 percent compared to a 2 percent reduction computed for a Ta layer of the same thickness. Plastic yielding in the Ta was not effective in reducing cool-down stresses. Compliant alpha-2 particles next to the stiffer gamma particles reduced stresses in the gamma particles by less than 2 percent. A simple closed form analysis was developed to calculate thermal residual stresses in a fiber/interphase/matrix system. A 2-micron-thick Ag interphase layer was found to reduce residual stresses by about 11 percent.

Naik, R. A.↗
NASA NTRS1940

Creep Strength of Stabilized Wrought-aluminum Alloys

Rohn-type equipment has been mounted on rubber blocks, for the purpose of damping the vibrations of the ground and of rendering the plastic yielding of the test bars less subject to outside interferences. New equipment also included three shockproof creep-testing machines with the Martens mirror instruments for recording the strain curve of the fatigue-tested specimens.

Muller, W↗
NASA NTRS2009

Analysis of Potential for Titanium Liner Buckling after Proof in a Large Kevlar/Epoxy COPV

We analyze the potential for liner buckling in a 40-in Kevlar49/epoxy overwrapped spherical pressure vessel (COPV) due to long, local depressions or valleys in the titanium liner, which appeared after proof testing (autofrettage). We begin by presenting the geometric characteristics of approximately 20 mil (0.02 in.) deep depressions measured by laser profilometry in several vessels. While such depths were more typical, depths of more than 40 mils (0.02 in.) were seen near the equator in one particular vessel. Such depressions are largely the result of overlap of the edges of overwrap bands (with rectangular cross-section prepreg tows) from the first or second wrap patterns particularly where they start and end. We then discuss the physical mechanisms of formation of the depressions during the autofrettage process in terms of uneven void compaction in the overwrap around the tow overlap lines and the resulting 10-fold increase in through-thickness stiffness of the overwrap. We consider the effects of liner plastic yielding mechanisms in the liner on residual bending moments and interface pressures with the overwrap both at the peak proof pressure (approx.6500 psi) and when reducing the pressure to 0 psi. During depressurization the Bauschinger phenomenon becomes very important whereby extensive yielding in tension reduces the magnitude of the yield threshold in compression by 30 to 40%, compared to the virgin annealed state of the liner titanium. In the absence of a depression, the liner is elastically stable in compression even at liner overwrap interface pressures nominally 6 times the approx. 1000 psi interface pressure that exists at 0 psi. Using a model based on a plate-on-an-elastic-foundation, we develop an extensive analysis of the possible destabilizing effects of a frozen-in valley. The analysis treats the modifying effects of the residual bending moments and interface pressures remaining after the proof hold as well as the Bauschinger effect on the compressive yield threshold. The key result is that depression depths of up to 40 mils can be tolerated, but above 40 mils, the Bauschinger effect drives destabilization, and buckling becomes increasingly likely depending on the details of depression formation during autofrettage. It is almost certain that destabilization and buckling will occur for depression depths beyond 55 mils. The main equations and formulas for treating the various phases of depression development and potential buckling, are only briefly outlined in the paper, but are available from the authors.

Phoenix, S. Leigh↗
NASA NTRSDate not supplied

Fracture Prediction of Epoxy Resin using Morse Bond Potential Embedded in GAFF using Molecular Dynamics Simulations

A generic method is developed to investigate the fracture behavior of an epoxy resin using atomistic molecular (MD) dynamics simulations. The epoxy system consisted of the stoichiometric mixture of tetra-/tri-functional epoxies and di-functional hardener molecules and was cured with a step-growth crosslinking algorithm. A hybrid force field (hFF) in which Morse bond function were added in second generation-general Amber Force Field (GAFF2) was used to capture bond breaking of the crosslinked epoxy system under uniaxial deformation. The Morse bond parameters for covalent bonds in the crosslinked backbone were fit to dissociation curves computed by CASPT2/6-311+G**. After the systems in various crosslink densities were obtained and equilibrated, the full length of stress-strain (𝜎-𝜀) curve was produced including initial elastic regime, yielding, plastic flow, strain hardening, and progressive failure. We found that the hFF was effective in studying the dissociation of crosslinked polymers and understanding the failure mechanism. In the results, the hFF delivered the same elastic property obtained from the unmodified force field GAFF. The stress-strain curve, however, began to be distinct in the plastic regime due to broken covalent bonds capable of altering the tensile behavior. Once the stress reached maximum, it progressively decreased until the ultimate failure (𝜎=0). Since hFF employed the existing GAFF functions with including a minimal change of its bond potential, this approach is easier to perform and computationally more efficient for unveiling the fracture behavior of polymer materials at the molecular level than other approaches with reactive force fields. We expect this approach will be utilized to accelerate the material-by-design process for thermosets by incorporate data from molecular models.

Changwoon Jang↗