Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Elastic-plastic analysis of AS4/PEEK composite laminate using a one-parameter plasticity model

A one-parameter plasticity model was shown to adequately describe the plastic deformation of AS4/PEEK (APC-2) unidirectional thermoplastic composite. This model was verified further for unidirectional and laminated composite panels with and without a hole. The elastic-plastic stress-strain relations of coupon specimens were measured and compared with those predicted by the finite element analysis using the one-parameter plasticity model. The results show that the one-parameter plasticity model is suitable for the analysis of elastic-plastic deformation of AS4/PEEK composite laminates.

Sun, C. T.↗
DOE OSTI2023

Life-cycle analysis of recycling of post-use plastic to plastic via pyrolysis

Advanced recycling enables the application of post-use plastics (PUP) to produce valuable industrial chemicals and develop markets for recycled feedstocks. Pyrolysis is one of the most common advanced recycling technologies undergoing industrial-scale implementation for converting PUP. This paper presents a life cycle analysis (LCA) to assess greenhouse gas (GHG) emissions, fossil energy, water consumption, and solid waste impacts of converting PUP into new plastics such as high-density and low-density polyethylene (HDPE and LDPE, respectively). Data was collected from eight plastic pyrolysis companies. This study addresses the impacts of pyrolysis plant size and maturity; two substitution rate (SR) cases of pyrolysis oil with fossil-derived feedstocks in steam crackers (5% and a 20% of pyrolysis oil SR); and potentially avoided emissions from traditional end-of-life (EOL) management. Because the conventional feedstock slate of steam crackers in the Unites States is comprised of 94% gases (a mix of ethane, propane, and butane) and 6% naphtha, the 5% SR case looked at polyethylene (PE) derived from 5% pyrolysis oil, 1% naphtha, and 94% gases; while the 20% SR looked at PE derived from 20% pyrolysis oil and 80% gases. Moreover, the results are presented from two perspectives: 1) steam crackers' and 2) plastic recyclers'. In the recyclers' perspective, the results for the 5% SR showed for each kg of PUP used there was a 23% and 18% decrease in GHG emissions for HDPE and LDPE respectively, while the 20% SR showed a 4% and 3% reduction in GHG emissions for HDPE and LDPE respectively compared to virgin plastic. The 20% SR has lower GHG emissions reductions because there is an added step of hydrotreating the pyrolysis oil to remove chlorine concentrations that is not included in the 5% SR scenario. Furthermore, the 5% SR removes most of the naphtha, a more carbon intense feedstock, and replaces it with PUP-based pyrolysis oil, a less carbon intense feedstock. GHG emissions for PUP pyrolysis could be further reduced by 50% and 131% in the United States and European Union respectively if the GHG emissions of current PUP incineration practices were considered as emission reductions credits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Computational material design for Q&P steels with plastic instability theory

In this paper, the deformation limits of Quenching and Partitioning (Q&P) steels are examined with the plastic instability theory. For this purpose, the constituent phase properties of various Q&P steels were first experimentally obtained, and used to estimate the overall tensile stress-strain curves based on the simple rule of mixture (ROM) with the iso-strain and iso-stress assumptions. Plastic instability theory was then applied to the obtained overall stress-strain curves in order to estimate the deformation limits of the Q&P steels. A parametric study was also performed to examine the effects of various material parameters on the deformation limits of Q&P steels. Computational material design was subsequently carried out based on the information obtained from the parametric study. The results show that the plastic instability theory with iso-stress-based stress-strain curve may be used to provide the lower bound estimate of the uniform elongation (UE) for the various Q&P steels considered. The results also indicate that higher austenite stability/volume fractions, less strength difference between the primary phases, higher hardening exponents of the constituent phases are generally beneficial for the performance improvement of Q&P steels, and that various material parameters may be concurrently adjusted in a cohesive way in order to improve the performance of Q&P steel. The information from this study may be used to devise new heat treatment parameters and alloying elements to produce Q&P steels with the improved performance.

Cheng, G.↗
DOE OSTI2023

Circular plastics technologies: pyrolysis of plastics to fuels and chemicals

Pyrolysis technologies are a staple in plastic chemical recycling because of the robustness to contamination and existing infrastructure. Pyrolysis is already considered to be a reasonably mature technology with numerous pilot plants operating to pyrolyze plastic waste into fuels and chemicals. Here this chapter will describe the pyrolysis process and important process parameters, the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, the products derived from different plastics, companies that have successfully scaled pyrolysis recycling, and recent innovations in the technology.

09 BIOMASS FUELS↗
DOE OSTI2026

Electrochemical Deconstruction of Ortho-Phthalate Plasticizers and Recovery of Plasticizing Moieties

Electrochemical methods for the direct reduction of alkyl esters have been understudied but provide a potential advantage for addressing specific waste streams given that such strategies often require only a minimal chemical profile. One such waste stream that could benefit from electrochemical remediation is poly(vinyl chloride) (PVC) plastics. PVC recycling often faces challenges due to the complexity of such waste. Solvent-based recycling methods pose several advantages for addressing post-use PVC; however, such methods are complicated by the high amounts of toxic legacy plasticizers (ortho-phthalates) present in PVC. A potential solution to addressing such phthalates is to address them electrochemically, coupled with recovery of the resulting valuable products. Presented herein is an optimized electrochemical method for ester activation that is leveraged to separate and recover the aromatic and alkyl components of ortho-phthalate plasticizers. The resulting aliphatic alcohols may be reused to prepare other non-toxic plasticizers. This electro-degradation method is demonstrated on six phthalates that have been identified to pose health concerns in addition to plasticizers recovered from commercial samples of PVC.

di-(2-ethylhexyl) phthalate↗
DOE OSTI2019

Parametric Study of Cyclic Plasticity Behavior in a Directionally Solidified Superalloy with Partial Recrystallization by Crystal Plasticity Finite Element Simulation

To understand the influence of recrystallization on the low-cycle fatigue behavior of directionally solidified nickel-based DZ4 superalloy, crystal plasticity-based finite element (CPFE) analysis was carried out to study the cyclic plastic behaviors. Using the design of experiments (DOE) technique, a series of CPFE simulations were designed and performed for DZ4 superalloy with recrystallized grains to examine the cyclic plastic shear deformation at the carbide/matrix interface, at the recrystallized grain boundary/matrix, and in the matrix. Seven influence factors, i.e., applied strain, strain ratio, carbide modulus, dwell time, misorientation angle, carbide aspect ratio, and carbide size, were considered, and the effects of which were quantitatively evaluated by the maximum accumulated plastic shear strains via CPFE-based DOE analysis. The results showed that carbide and recrystallized grain boundary had competitively significant effects on fatigue crack initiation. Applied strain was the most influential parameter among all the studied parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2014

A dislocation-based, strain–gradient–plasticity strengthening model for deformation processed metal–metal composites

Deformation processed metal–metal composites (DMMCs) are high-strength, high-electrical conductivity composites developed by severe plastic deformation of two ductile metal phases. The extraordinarily high strength of DMMCs is underestimated using the rule of mixture (or volumetric weighted average) of conventionally work-hardened metals. A dislocation-density-based, strain–gradient–plasticity model is proposed to relate the strain-gradient effect with the geometrically necessary dislocations emanating from the interface to better predict the strength of DMMCs. The model prediction was compared with our experimental findings of Cu–Nb, Cu–Ta, and Al–Ti DMMC systems to verify the applicability of the new model. The results show that this model predicts the strength of DMMCs better than the rule-of-mixture model. The strain-gradient effect, responsible for the exceptionally high strength of heavily cold worked DMMCs, is dominant at large deformation strain since its characteristic microstructure length is comparable with the intrinsic material length.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Virtual diffraction simulations using the quasi-coarse-grained dynamics method to understand and interpret plasticity contributions during in situ shock experiments

The dynamic deformation response of metallic materials has contributions from dislocations, deformation twinning, and plastic deformation. The current state-of-art techniques can detail the complex mechanistic history of deformation modes under shock loading in real-time using in situ X-ray diffraction (XRD). However, the capability of these experiments to unravel plasticity contributions is challenging due to limitations in interpreting results and the lack of validation from atomistic simulations. Molecular dynamics (MD) simulations can successfully capture various deformation modes in metals and complement experiments using simulated diffractograms at various stages of evolution. However, the difference in length and time scales of MD simulations and experiments is a substantial obstacle in completing and interpreting in situ diffractograms. Therefore, the existing modeling methods require various approximations to model defect evolution and interaction at the mesoscales. However, while using approximations to correlate the peak broadening behavior to the density of dislocations or the shifts/splitting due to the presence of twins, the interpretations of the plasticity contributions from diffractograms are non-trivial, especially when multiple modes of deformation may be operating. This viewpoint discusses combining a mesoscale modeling method called quasi-coarse-grained dynamics and virtual XRD to characterize the plasticity contributions in BCC metals from slip, twinning, and phase transformation behavior. Furthermore, the combined approach shows promise in bridging the mesoscale gap between the capabilities of atomic-scale simulations and in situ experiments to characterize the dynamic deformation of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Classification of Methane Emissions from Industrial Meters, Vintage vs Modern Plastic Pipe, and Plastic-lined Steel and Cast-Iron Pipe (Final Report)

The project focus was to improve the characterization of methane (CH 4 ) emissions currently detailed in the U.S. Environmental Protection Agency (EPA) Greenhouse Gas Inventory (GHGI) for categories of assets within the Natural Gas (NG) distribution system to isolate what is driving inflation or deflation behind current, nationwide, aggregated Emission Factors (EFs). These specific categories included industrial/commercial NG customer meters, modern and vintage plastic pipe, along with plastic-lined steel and cast-iron pipe. CH 4 emission rate data was gathered during 25 sampling campaigns at industrial/commercial meter sites, vintage and modern plastic pipe sites, as well as plastic-lined steel and cast-iron sites located within NG distribution networks.

03 NATURAL GAS↗
NASA NTRS2012

Multiscale Modeling of Structurally-Graded Materials Using Discrete Dislocation Plasticity Models and Continuum Crystal Plasticity Models

A multiscale modeling methodology that combines the predictive capability of discrete dislocation plasticity and the computational efficiency of continuum crystal plasticity is developed. Single crystal configurations of different grain sizes modeled with periodic boundary conditions are analyzed using discrete dislocation plasticity (DD) to obtain grain size-dependent stress-strain predictions. These relationships are mapped into crystal plasticity parameters to develop a multiscale DD/CP model for continuum level simulations. A polycrystal model of a structurally-graded microstructure is developed, analyzed and used as a benchmark for comparison between the multiscale DD/CP model and the DD predictions. The multiscale DD/CP model follows the DD predictions closely up to an initial peak stress and then follows a strain hardening path that is parallel but somewhat offset from the DD predictions. The difference is believed to be from a combination of the strain rate in the DD simulation and the inability of the DD/CP model to represent non-monotonic material response.

Saether, Erik↗
DOE OSTI2020

Modeling the role of local crystallographic correlations in microstructures of Ti-6Al-4V using a correlated structure visco-plastic self-consistent polycrystal plasticity formulation

This paper presents a multi-level crystal plasticity-based simulation framework for modeling mechanical response and microstructure evolution of Ti-6Al-4V with α-lath/lamellar microstructures. Here, the model is a correlated structure visco-plastic self-consistent (CS-VPSC) formulation linking three scales: a single crystals micro-scale, a lath/lamellar colony meso-scale, and a lath/lamellar aggregate macro-scale. A selected hardening law for the evolution of critical resolved shear stress per slip system used in CS-VPSC is phenomenological. However, it adjusts the resistances of basal and prismatic slip systems based on the geometry of slip transfer between adjacent lamellae. Consistent with experimental evidences, the resolved shear stress on the pyramidal slip planes is dependent not only on the stress in the direction of slip but also on the two orthogonal shear stress components and the three normal stress components (non-Schmid effects). Electron backscatter diffraction (EBSD) data in conjunction with a procedure relying on α→β phase transformation is used to construct paired variants of α-laths/lamellae satisfying their local crystallographic correlations. The procedure fits volume fractions of individual laths/lamellae with the experimental EBSD data and selects a distribution of habit planes between adjacent variants with respect to the loading direction. The simulation framework is applied to interpret the deformation behavior in tension and compression along two sample directions of Ti-6Al-4V fabricated via laser powder bed fusion. Moreover, the model is used to simulate texture evolution during rolling of the material to large strains. It is demonstrated that the model is capable of predicting plastic anisotropy/asymmetry and the concomitant texture evolution. While the model reveals a significant effect of habit plane inclination with respect to the loading direction on yield stress, the comparison of the data and model predictions shows that a random distribution of habit planes fits the flow response. It is further inferred that the tension-compression asymmetry arises from the non-Schmid effects.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pattern formation on free surfaces via plastic buckling and periodic folding

Spontaneous formation of surface patterns such as folds and creases is widely observed in engineered systems, such as thin films and machined surfaces, as well as in natural systems such as floral petals and leaves. A recognized route for their formation is via surface elastic instabilities. Here we demonstrate an alternate route for their formation —plastic buckling and folding—that occurs when ductile materials are subject to large-strain (>1) deformation. Using in situ imaging of simple-shear deformation of polypropylene, we delineate the mechanics underlying formation of folds and the resulting surface morphology. Here, the fold pattern shows a single wavelength that scales linearly with the size of the plastic zone. An analytical model predicts onset of the plastic buckling instability and characteristics of the folds. Besides obvious applications for controllably generating surface features over large areas, our results suggest a contributing mechanism for origin of surface roughness in solids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

All-Polyester Multilayer Plastics (‘All-Polyester MLPs’): A Redesign for Inherently Recyclable Plastics

Multilayer plastics (MLPs) are widely used in modern packaging because they combine multiple functions such as oxygen and moisture barriers, mechanical strength, puncture resistance, and heat sealability into lightweight and cost-effective packaging solutions. These attributes are essential for food, beverage, pharmaceutical, and consumer goods packaging. However, conventional commercial MLPs typically consist of five to twelve layers made from chemically incompatible materials, including polyolefins, polyethylene terephthalate, nylon, ethylene-vinyl alcohol (EVOH), adhesives, and tie layers. This complexity makes MLPs extremely difficult to recycle. As a result, the vast majority of multilayer plastics (MLPs) are disposed of through landfilling or incineration. This disposal pathway perpetuates demand for virgin material production, thereby driving high industrial energy consumption, increasing greenhouse gas (GHG) emissions, and contributing to the long-term accumulation of plastic waste. The scope of work included: (1) Design and fabrication of all-polyester multilayer structures using commercially relevant processing methods; (2) Experimental validation of barrier, mechanical, and sealing performance; (3) Demonstration of both mechanical and chemical recycling pathways; and (4) Comprehensive techno-economic analysis (TEA) and life-cycle assessment (LCA) to quantify cost, energy, and environmental impacts.

36 MATERIALS SCIENCE↗
DOE OSTI2016

A defect density-based constitutive crystal plasticity framework for modeling the plastic deformation of Fe-Cr-Al cladding alloys subsequent to irradiation

It is essential to understand the deformation behavior of these Fe-Cr-Al alloys, in order to be able to develop models for predicting their mechanical response under varied loading conditions. Interaction of dislocations with the radiation-induced defects governs the crystallographic deformation mechanisms. A crystal plasticity framework is employed to model these mechanisms in Fe-Cr-Al alloys. This work builds on a previously developed defect density-based crystal plasticity model for bcc metals and alloys, with necessary modifications made to account for the defect substructure observed in Fe-Cr-Al alloys. The model is implemented in a Visco-Plastic Self Consistent (VPSC) framework, to predict the mechanical behavior under quasi-static loading.

36 MATERIALS SCIENCE↗