Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATINUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Techno-economic and life cycle analyses of the synthesis of a platinum–strontium titanate catalyst

The heterogeneous platinum/strontium titanate (Pt/SrTiO 3 or Pt/STO) catalyst has garnered significant attention as a promising candidate for the hydrogenolysis of polyolefins to hydrocarbon oils. This study evaluates the cost and environmental impacts of a newly developed scalable Pt/STO catalyst production, which includes the synthesis of the STO support and the deposition of Pt onto the support. This two-step synthesis plays a significant role in assessing the commercial feasibility of the catalyst, while energy consumption during the process plays an important role in its environmental impacts. The CatCost and the Research and Development Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) models were used, respectively, to perform techno-economic analysis (TEA) and life cycle analysis (LCA) of the newly developed catalyst. The TEA showed that the raw materials, accounting for approximately 76% of the total operation cost, has a profound effect on the estimated catalyst cost, mainly due to the platinum precursor. The LCA findings indicated that the catalyst production generates greenhouse gas (GHG) emissions of 66 kg CO 2 e per kg, primarily due to the use of solvents and electricity in the process. The sensitivity analysis indicated that the total operating costs (OpEX), platinum precursor cost, and spent catalyst value (SCV) significantly impact the cost of the synthesized catalyst. Additionally, adopting solvent recovery strategies and using renewable electricity can reduce the GHG emissions of catalyst production to 29 kg CO 2 e per kg.

Heterogeneous Platinum/strontium titanate Catalyst↗
DOE OSTI2025

How the Arrangement of Platinum Atoms on Ruthenium Nanoparticles Improves Hydrogen Evolution Activity

The platinum‐ruthenium (PtRu) system is highly active for hydrogen evolution reaction (HER) in alkaline media with both Pt and Ru playing active roles in the water dissociation step that generates adsorbed hydrogen atoms. Precise control of the arrangement of Pt atoms on Ru nanoparticles can maximize the Pt‐Ru sites for water dissociation and Pt‐Pt sites for hydrogen production and can considerably improve HER catalytic performance. By directing the growth and distribution of Pt on Ru hourglass nanoparticles, the arrangement of Pt on Ru is controlled into forming Pt islands, small Pt clusters, and strings of a few Pt atoms. Calculations show that the unique atomic string arrangements of Pt on Ru is the thermodynamically favorable configuration. Additionally, these strings have a favorable combination of Pt‐Ru and Pt‐Pt sites, making the Pt‐string on Ru the most active catalyst with a more than fivefold increase in turnover frequency for alkaline HER compared to the Pt‐island on Ru catalyst. The results show how controlling the Pt atomic arrangement on Ru nanoparticle surfaces for the tuning of Pt‐Pt and Pt‐Ru neighboring sites can direct toward a more efficient HER mechanism and thereby significantly enhancing HER performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Proton- and deuteron-induced cross sections on natural platinum

Light-ion irradiations on natural platinum were performed to measure gold-radioisotope cross sections and isotope ratios, as well as to produce a carrier-free final product. Experimental cross sections are compared to TENDL-2023. There is good agreement with this work's results and other published literature values. In conclusion, several novel cross sections were determined including 190 Au, 191 Au, 199 Pt and several independent cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Solution-Phase Synthesis of Platinum-Decorated Hydrogen Tungsten Bronzes for Hydrogen Atom Transfer from Oxides to Molecules

Hydrogen bronzes can be used as hydrogen donors for the broad class of reactions involving proton-coupled electron transfer (PCET). Here, in this work, we describe a method to prepare platinum-decorated hydrogen tungsten bronzes, Pt@H x WO 3 · n H 2 O with n = 0, 1, and 2, by reacting the pristine oxides at modest temperatures with a mild reducing agent, H 3 PO 2 , and H 2 PtCl 6 in an aqueous solution. We explored the tunability and kinetics of this reaction and compared it with that of archetypal gas–solid hydrogen spillover. We demonstrate that the identity of the noble metal affects the extent of bronze reduction. This suggests that the mechanism proceeds via the adsorption of a hydrogen-atom species on the noble metal. Finally, we explored the ability of the Pt-decorated hydrogen tungsten bronzes to hydrogenate a model H + /e – acceptor, 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO). The bronze phases return to their fully oxidized states along with the subsequent reduction of TEMPO to TEMPOH. Overall, this work demonstrates a solution-phase method to obtain hydrogen bronzes, which can then be used to perform hydrogen transfer reactions, providing a pathway for the use of extended transition metal oxides as stoichiometric reagents for broad classes of hydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Oxidizing Conditions in the Dispersion of Supported Platinum Nanoparticles Explored by Ab Initio Modeling

Achieving fine control over the dispersion of supported platinum nanoparticles (Pt) is a promising avenue to enhancing their catalytic activity and selectivity. Experimental observations suggest that exposing ceria-supported Pt nanoparticles to O 2 at 500 °C promotes their dispersion into smaller particles and eventually single atoms. The exact role of oxygen in this process is not yet well understood. Past density functional theory studies of ceria-supported Pt have typically narrowed their scope to single atoms and clusters of a few atoms. Herein, we combine several approaches and types of models in a consistent atomistic framework to evaluate the relative stability of ceria-supported Pt as a function of the degree of oxidation of Pt and of the particle size, ranging from single atoms to nanoparticles 1.5 nm of diameter. Finally, we find that the largest nanoparticles remain the thermodynamically most stable species on the lowest energy facet of ceria even under oxidizing conditions, suggesting that stronger adsorption sites are required to stabilize smaller clusters and single atoms and promote oxidative dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Highly Active Carbon–Platinum-Based Nanozymes: Synthesis, Characterization, and Immunoassay Application

Nanozymes (nanomaterials with intrinsic enzyme-like characteristics) have gained much attention for diagnostics and therapy due to their excellent enzyme-mimicking capability, great stability in environments, and facile and low-cost production. However, developing nanozymes with a high catalytic constant, K cat , has been challenging. Herein, we report a class of nanozyme-mimicking peroxidases, which are formed by depositing ultrasmall platinum nanoparticles (Pt NPs) 1–2 nm in size on the surface of hydrophilic nitrogen-doped carbon nanoparticles (CN NPs). These nanozymes defined as CN-Pt NPs show a high peroxidase-like activity with K cat values of 1.27 M·mL/s·g for 3,3,5,5′-tetramethylbenzidine (TMB) and 1.97 M·mL/s·g for hydrogen peroxide (H 2 O 2 ), respectively, which are at least one or two orders higher than many other reported carbon–noble metal-based nanozymes. Our developed CN-Pt NPs were further utilized in a colorimetric immunoassay as signal amplifiers for the biomarker detection of Burkholderia pseudomallei, a Gram-negative bacterial pathogen classified as a tier 1 select agent by the US CDC. In conclusion, the assay achieved lower limits of detection of 0.11 ng/mL in phosphate-buffered saline (PBS) and 0.16 ng/mL in human serum, when compared to many other assays in detecting the same biomarker.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Flexible and Extensive Platinum Ion Gel Condensers for Programmable Catalysis

Catalytic condensers composed of ion gels separating a metal electrode from a platinum-on-carbon active layer were fabricated and characterized to achieve more powerful, high surface area dynamic heterogeneous catalyst surfaces. Ion gels comprised of poly(vinylidene difluoride)/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide were spin coated as a 3.8 μm film on a Au surface, after which carbon sputtering of a 1.8 nm carbon film and electron-beam evaporation of 2 nm Pt clusters created an active surface exposed to reactant gases. Electronic characterization indicated that most charge condensed within the Pt nanoclusters upon application of a potential bias, with the condenser device achieving a capacitance of ∼20 μF/cm 2 at applied frequencies of up to 120 Hz. The maximum charge of ∼10 14 |e – | cm –2 was condensed under stable device conditions at 200 °C on catalytic films with ∼10 15 sites cm –2 . Grazing incidence infrared spectroscopy measured carbon monoxide adsorption isobars, indicating a change in the CO* binding energy of ∼19 kJ mol –1 over an applied potential bias of only 1.25 V. Condensers were also fabricated on flexible, large area Kapton substrates allowing stacked or tubular form factors that facilitate high volumetric active site densities, ultimately enabling a fast and powerful catalytic condenser that can be fabricated for programmable catalysis applications.

Catalysis↗
DOE OSTI2025

Dual-Emitting Cyclometalated Platinum Compounds with Isocyanide Ligands

Cyclometalated platinum(II) compounds with both C^N chelating iminic ligands and isocyanide ligands were synthesized. Two sets of compounds from the reaction of two separate HC^N ligands (derived from thiophene or benzene) with [Pt2Me4(μ-SMe 2 ) 2 ] were obtained, resulting in square planar compounds with an anionic C^N ligand, a methyl ligand, and a dimethyl sulfide (dms) ligand completing the coordination sphere. Subsequently, the dms ligand was easily substituted by several isocyanide ligands (2-naphthyl, adamantyl, 2,6-dimethylphenyl, ptoluenesulfonylmethyl). The compounds were characterized by multinuclear NMR spectroscopy, IR spectroscopy, and singlecrystal X-ray diffraction (SCXRD). Their photophysical properties were explored using UV/vis, emission, and transient absorption (TA) spectroscopy. The emission spectra for the thiophene-derived compounds showed well-defined dual emission peaks, while the benzene-derived compounds’ bands appeared less resolved. DFT and TDDFT calculations were performed, and results were compared to the observed spectroscopic properties of the newly synthesized complexes.

Inorganic carbon compounds↗
DOE OSTI2025

Data for: Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources

Data package for manuscript "Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources" by Emily G. Wright, Ivey Wang, Yihang Fang, Elaine D. Flynn, and Jeffrey G. Catalano. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to goethite and Pt(II) adsorption to hematite and goethite, including lab experiments, X-ray absorption fine structure spectroscopy, and models of retention within a laterite. See the associated manuscript for full methods information. The file "Wright2025_PtAds_data.csv" contains the target starting Pt concentration (uM), final aqueous Pt and associated error (in uM), calculated adsorbed Pt and associated error (in umol/m2), target and measured aqueous chloride (mM), target aqueous nitrate (mM), final pH, and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, S20, and S22 in the associated manuscript. The file "Wright2025_PdAds_data.csv" contains the target starting Pd concentration (uM), final aqueous Pd and associated error (in uM), calculated adsorbed Pd and associated error (in umol/m2), target and measured aqueous chloride (mM), and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, and S20 in the associated manuscript. The file "Wright2025_MineralBatches_data.csv" contains the mineral identity and BET specific surface area (m2/g) for every mineral batch synthesized and used in experiments. The annealing time used is listed for hydrothermally annealed goethite. These data appear in Table S2 in the associated manuscript. The file "Wright2025_XRD_data.csv" contains the XRD patterns for every mineral batch synthesized as the counts as a function of two theta (in degrees). See "Wright2025_MineralBatches_data.csv" for more details on specific mineral batches. These data appear in Figure S2 in the associated manuscript. The file "Wright 2025_ZetaPotential_data.csv" contains the measured zeta potentials for samples of goethite (batch G2) at pH 4 the presence of varying amounts of sodium chloride. These data appear in Table S3 in the associated manuscript. The file "Wright2025_XAFSSamples_data.csv" contains the specific mineral batch, measured final aqueous Pd or Pt (uM), measured final aqueous chloride (mM), and estimated adsorbed Pd or Pt (umol/m2) of all XAFS samples. These data appear in Tables S4, S7, S8, and S10 in the associated manuscript. The files "Wright2025_PdXAFS_data.csv" and "Wright2025_PtXAFS_data.csv" contain the normalized spectra of Pd and Pt, respectively, adsorbed to minerals at varying chloride concentrations. See "Wright2025_XAFSSamples_data.csv" for a guide to sample names. Note that "05" in a sample name is equivalent to "0.5". These data appear in Figures 2, S6, S7, S8, S12, S13, and S14 in the associated manuscript. The file "Wright2025_LateriteProfileProfileModelParameters_data.csv" include the ratio of hematite to hematite and goethite in two synthetic, modeled profiles, as well as the modeled surface areas of goethite and hematite as a function of relative depth within the modeled weathering zone. These data were used, in conjunction with equations presented in the paper, to calculate the theoretical concentrations of Pd and Pt (and the resulting Pt/Pd ratio) within the profiles. These data appear in Figure 3 in the associated manuscript. The file "Wright2025_Imagery_data.zip" is a zipped folder containing the TEM and STEM images appear in Figures S18 and S19. Individual files are labeled as either STEM (Fig. S18) or TEM (Fig. S19) with a letter representing the part of the multipart figure.

58 GEOSCIENCES↗
DOE OSTI2024

In situ Formation of Platinum-Carbon Catalysts in Propane Dehydrogenation

The catalytic production of propylene via propane dehydrogenation (PDH) is a key reaction in the chemical industry. By combining operando transmission electron microscopy with density functional theory analysis, we show that the intercalation and ordering of carbon on Pt interstitials to form Pt-C solid solutions is relevant for increasing propylene production. More specifically, we found that at the point of enhanced propylene formation, the structure of platinum nanoparticles is transformed into a transient caesium chloride-type Pt-C polymorph. At more elevated temperatures, the zincblende and rock salt polymorphs seemingly coexist. When propylene production was highest, multiple crystal structures consisting of Pt and carbon were occasionally found to coexist in one individual nanoparticle, distorting the Pt lattice. Catalyst coking was detected at all stages of the reaction, but did initially not affect all particles. These findings could lead to the development of novel synthesis strategies towards tailoring highly efficient PDH catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

NO Reduction with CO on Low‐loaded Platinum‐group Metals (Rh, Ru, Pd, Pt, and Ir) Atomically Dispersed on Ceria

Abstract Low‐loaded platinum‐group single‐atom catalysts on CeO 2 (M 1 /CeO 2 ) were synthesized via high‐temperature atom trapping (AT) and tested for the NO+CO reaction under dry and wet conditions. The activity of these catalysts for NO+CO reaction follows the order Rh>Pd≈Ru>Pt>Ir. For Rh, Ru, and Pd single‐atom catalysts, the N 2 O byproduct is formed but not clearly observed in Ir and Pt cases, which may result from the higher reaction temperature (>200 °C) required for Pt and Ir catalysts. The presence of water can promote the activity of these M 1 /CeO 2 catalysts for the NO+CO reaction. Under wet conditions, significant NH 3 formation occurred during the reaction, which is due to the co‐existence of water‐gas‐shift reaction on these catalysts. Compared with Pt, Pd and Ir, the Rh and Ru single‐atom catalysts show higher selectivity to NH 3 species, resulting from the hydride species on the surface. Among all tested catalysts, Ru 1 /CeO 2 shows the highest production of ammonia and highest CO conversion due to excellent water‐gas‐shift activity, whereas Pd 1 /CeO 2 shows lowest ammonia production. Rh 1 /CeO 2 shows the best low temperature NO reduction activity among all tested catalysts.

Tian, Jinshu↗
DOE OSTI2024

Tuning the Superconducting Transition Temperature of Co-sputtered Iridium and Platinum Films

A superconducting film with a tunable low transition temperature (Tc) is required in high-resolution Transition-Edge Sensor (TES) detectors, which have applications including dark matter detection, low threshold coherent elastic neutrino nucleus scattering measurement, and X-ray spectroscopy. We have been investigating a new approach to tune the Tc of superconducting thin films fabricated by co-sputtering Iridium and Platinum. The effects of Pt concentration and deposition parameters on the films' structural, electrical, and superconducting properties have been studied. AFM and XRD techniques and low temperature resistance measurements have been utilized for film characterization. By varying the Pt concentration and deposition parameters when co-sputtering, we have successfully achieved controllable tuning of Tc in the range of 30-200 mK. The experimental results demonstrate co-sputtering as a viable method for controlling the Tc of Ir-based thin films that can be applied to fabricating high-resolution TESs.

Yefremenko, V. G.↗
DOE OSTI2024

Machine learning-guided design of direct methanol fuel cells with a platinum group metal-free cathode

Direct methanol fuel cells (DMFCs) offer a promising solution for clean electricity generation, particularly in small electronics and remote auxiliary power units. However, optimizing their efficiency and performance is challenging due to the complex interactions between various factors. Here, we present a novel approach that integrates experiments with machine learning to model and predict the performance of these fuel cells using atomically dispersed platinum group metal (PGM)-free catalysts at the cathode. Further, our machine learning models, trained on diverse input parameters, allow for the comprehensive optimization of DMFC performance prior to fabrication and testing. Through extensive experimental validation, we demonstrate that this data-driven approach accurately predicts key performance metrics, such as maximum power output and polarization curves. By combining our models with interpretable game-theory methods, we provide deep insights into the factors governing fuel cell performance, ultimately paving the way for the design of scalable and efficient DMFC technologies.

25 ENERGY STORAGE↗
DOE OSTI2025

Preventing native oxide formation in niobium thin films through platinum encapsulation

Superconducting transmon qubits are a key technology in quantum computing, with niobium (Nb) widely used due to its favorable superconducting properties and compatibility with scalable fabrication. However, the performance of Nb-based qubits is hindered by two-level systems (TLS), which arise predominantly from native oxide layers at surfaces and interfaces. These oxides and suboxides form rapidly in air and contribute significantly to decoherence by introducing dielectric losses. While various mitigation strategies, including thermal-annealing, chemical-etching, and nitrogen plasma treatment, have been explored, many are challenging to integrate into large-scale manufacturing due to complexity and instability in ambient conditions. In this study, we investigate the structural, chemical, and superconducting properties of room-temperature sputtered Nb thin films grown on sapphire substrates. We focus on a surface protection strategy using noble metal encapsulation with platinum (Pt) to suppress oxides and reduce TLS-related losses. Structural and chemical characterization were performed using X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Superconducting properties were measured using a physical property measurement system. Results demonstrate that Pt encapsulation effectively suppresses surface oxidation and mitigates its detrimental impact on superconducting performance. In conclusion, this approach offers a promising path toward enhancing the coherence of Nb-based qubits while remaining compatible with scalable-fabrication processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals

Strong metal–support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H 2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO 2 and Nb 2 O 5 . In this report we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H 2 in a Pt structure dependent manner. Reductive treatment in H 2 at 300 °C induces the formation of an AlO x SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Pt iso species possess a more uniform local coordination environment than has been observed on other forms of Al 2 O 3 , suggesting that the AlO x native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H 2 -induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Platinum Surface Water Orientation Dictates Hydrogen Evolution Reaction Kinetics in Alkaline Media

The fundamental understanding of sluggish hydrogen evolution reaction (HER) kinetics on a platinum (Pt) surface in alkaline media is a topic of considerable debate. Herein, we combine cyclic voltammetry (CV) and electrical transport spectroscopy (ETS) approaches to probe the Pt surface at different pH values and develop molecular-level insights into the pH-dependent HER kinetics in alkaline media. The change in HER Tafel slope from ~110 mV/decade in pH 7–10 to ~53 mV/decade in pH 11–13 suggests considerably enhanced kinetics at higher pH. The ETS studies reveal a similar pH-dependent switch in the ETS conductance signal at around pH 10, suggesting a notable change of surface adsorbates. Fixed-potential calculations and chemical bonding analysis suggest that this switch is attributed to a change in interfacial water orientation, shifting from primarily an O-down configuration below pH 10 to a H-down configuration above pH 10. This reorientation weakens the O–H bond in the interfacial water molecules and modifies the reaction pathway, leading to considerably accelerated HER kinetics at higher pH. Finally, our integrated studies provide an unprecedented molecular-level understanding of the nontrivial pH-dependent HER kinetics in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗