Search NASA⌕ Search

SEARCH · Search NASA

Results for “POLYPROPYLENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Characterization of textile-grade carbon fiber polypropylene composites

In this work, we consider low-cost carbon fiber produced with a textile-grade precursor. The objective of the study is to investigate textile-grade carbon-fiber-reinforced-polypropylene composites (TCF-PP) from compounded pellets for mechanical and thermal characterization. Four sets of pellets with 1%, 5%, 10%, and 15% reinforcement were manufactured using textile-grade carbon fiber (TCF) and polypropylene (PP) by twin-screw compounding. The addition of TCFs through gravimetric feeder directly in the extruder resulted in lower fiber content; however, side feeder has shown good potential. The pellets were further processed in extrusion compression molding to manufacture plaques. An increase in fiber loading has a negligible effect on fiber attrition as fiber length distribution variation between 1% and 15% reinforced pellets was very small. The addition of TCFs in PP showed a significant improvement in mechanical properties. The tensile strength and modulus of the composite were 26% and 161%, respectively, improved by the addition of 10 wt% TCF. Similar results were observed in the flexure test. However, the impact properties were reduced by 25.54% by the addition of 15% TCF.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Welded polypropylene liners for large descaling tanks

Liners for nitric and hydrofluoric acid tanks show no sign of deterioration after 18 months of continuous use. Each side of each edge of the polypropylene sheets is chamfered, and sheets are welded from both sides with polypropylene filler rod and a special hot-air welding torch.

Abel, H. P.↗
DOE OSTI2025

Polypropylene Composites Reinforced With Recycled Waste Cellulosic Fiber/Fine Mixture: The Impact of Cellulose Sieving on Performance

This study explores how a sieving step of waste cellulosic fiber and fine (WCFF) mixture affects the performance of WCFF‐loaded polypropylene (PP) composites and whether the separation of fines from fibers offers an added benefit. The WCFF samples were downsized, and four different filler size ranges were sieved using a series of mesh sizes from 4 to 0.85 mm. The WCFF/PP composites were then compounded at 20 wt.% loading of WCFF using a twin‐screw extruder. Incorporating WCFF increased the tensile strength to 41.28 MPa and the modulus to 3207 MPa, accounting for 28% and 38% enhancements, respectively. Interestingly, the greatest improvements were associated with the nonsieved WCFF case, and the sieved WCFF fibers provided only marginal enhancements over virgin PP. The outperformance of nonsieved WCFF was attributed to the synergistic reinforcement of hybrid fibers and fines as well as the maintenance of longer fibers in the system. However, the strain at break and impact strength of PP decreased after introducing WCFF. Moreover, the complex viscosity and storage modulus increased with an increase in the filler size, due to the formation of a more effective percolative network. The PP's crystallinity exhibited a relatively strong dependency on the sieving, where WCFF samples with short‐aspect‐ratio fillers promoted the crystallinity significantly. It was also found that the WCFF degradation onset temperature increased once it was incorporated into PP. This study suggests that waste cellulosic feedstocks can be utilized as a reinforcement without additional sieving to manufacture high‐performance and cost‐effective composites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimization of matrix viscosity improves polypropylene fiber dispersion and properties of engineered cementitious composites

Engineered cementitious composites (ECC) is a durable cementitious material with high tensile ductility and strain-hardening characteristics. Although considered as a cost-effective fiber for ECC, polypropylene (PP) fiber is reportedly difficult to disperse in mortar matrix due to its high aspect ratio and hydrophobicity. In this study, the matrix viscosity of a low-carbon ECC based on limestone calcined clay cement was tailored as a variable to improve PP fiber dispersion under a pre-determined mixing protocol. The effect of matrix viscosity on the composite fresh and hardened properties was investigated experimentally. Results suggested an optimal range of matrix viscosity (10.3–11.5 Pa . s) favors the composite tensile strength and strain capacity at 28 days. At the optimal state with a 0.1 % viscosity modifying admixture (VMA)-to-binder mass ratio, PP-ECC achieved 7.0 % tensile strain capacity and 3.5 MPa ultimate tensile strength. When matrix viscosity falls outside the desired range, both ultimate tensile strength and strain capacity were diminished. By tailoring the VMA dosage, the matrix viscosity can be adjusted for desired fiber dispersion, workability, and mechanical properties. Finally, the findings of this study provide a technical reference for the practical design and application of PP-ECC.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effect of fiber sizing and glass fiber laminate hybridization on vibration damping and mechanical properties of banana fiber reinforced polypropylene composites

Modern automotive applications demand lightweight, multifunctional materials to reach mileage goals and natural fiber reinforced composites (NFRCs) are one of the classes of materials proposed as a solution. NFRCs exhibit good vibration damping properties and have low density, but are often limited by processing challenges, poor-fiber matrix compatibility and variable performance. Herein, we investigate non-woven wet-lay of comingled banana fiber (BF), recycled glass fiber (rGF), and polypropylene (PP) fibers to in situ sizing and preparation of composite feedstocks for compression molding. BF and rGF hybrids were prepared by stacking rGF layers during compression molding to produce composites with various fiber ratios. The effect of fiber content, in-situ sizing and ratio of BF to rGF on tensile, flexural and vibration damping performance are investigated. Key results are the significant increase in tensile strength by in situ sizing (40 % sized at 60 wt% BF) and in flexural modulus (+58 % sized at 60 wt% BF) and flexural strength (+41 % sized 60 wt% BF) compared to the unsized equivalent. For BF-rGF hybrid composites with40 wt% total fiber content, flexural strength and modulus were improved by 51 % and 231 % respectively for a 1:1 ratio BF:rGF compared to BF reinforced system. Lastly, identifying the cross-over point where damping and stiffness are optimized for a hybrid composite. These findings demonstrate that these composites can be used as alternative to synthetic fiber or mineral filled composites in automotive applications, particularly where weight reduction, vibration damping and stiffness are desired.

Banana fiber↗
DOE OSTI2024

Size and Structure Effects of Carbon-Supported Ruthenium Nanoparticles on Waste Polypropylene Hydrogenolysis Activity, Selectivity, and Product Microstructure

Hydrogenolysis of plastic waste using Ru-based catalysts is promising for deconstructing polyolefins into lower molecular weight products. Yet, the effect of catalyst atomic structure and size on activity and product selectivity is poorly understood. Herein, we expose the effect of metal particle size and atomic structure on isotactic-polypropylene (i-PP) hydrogenolysis over Ru supported on carbon. Despite similar molecular weight distributions of solid and liquid products, their physical properties are distinct due to different chain regio-irregular CH3 sequences of steric pentads containing racemo configurations. We propose that i-PP hydrogenolysis entails an interplay of C–C bond scission and stereoisomerization. The active site’s local electronic environment and structure dictate the former, whereas polymer–catalyst surface interactions creating suitable polymer conformations control the latter. C–C scission and stereoisomerization are structure-sensitive. Small, disordered nanoclusters are effective in C–C bond scission, whereas larger metal nanoparticles promote stereoisomerization. Finally, we hypothesize that a heterogeneous distribution of metal active sites is essential for deconstruction and product (lubricant base oil) quality control.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-purity Polypropylene from Disposable Face Masks via Solvent-Targeted Recovery and Precipitation

The high use of disposable face masks since the start of COVID-19 has globally generated 4.68–6.24 million tons per year of waste from personal protective equipment. Disposable face masks are generally disposed of in landfills. Polypropylene (PP) is the main component in face masks, which is one of the least recycled plastics but has a high market value. In this work, we extract high-quality PP from face masks using solvent-targeted recovery and precipitation (STRAP) with 90 wt% recovery. N,N-Dimethylacetamide removed the color from the recovered PP to produce a clear high-purity PP, as verified by CIELAB color space. The decolored PP shows similar thermochemical properties and color to virgin PP resin. Here, a techno-economic analysis of the process indicates that high-purity PP recovery can be economically viable at a scale of 5000 tons per year or higher.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

New Sesame Equations of State for Polypropylene, Polyvinylchloride (PVC), and Nylon 66

I built new Sesame equations of state (EOS) for polypropylene (PP), polyvinylchloride (PVC), and nylon 66. PP has the same stoichiometry as polyethylene and TPX but with a density intermediate between the two. Nylon is a polyamide manufactured chiefly in the form of fibers. PP and PVC are the second- and third-most widely produced polymers in the world. All three are thermoplastics. Their monomer units are depicted in Figure 1. I discuss the theory on which the EOS are based in the following section, then compare results to thermal and shock compression data in Section III.

36 MATERIALS SCIENCE↗
DOE OSTI2025

3D Printing of Highly Porous Polypropylene Separators for Lithium‐Ion Batteries Using Fused Deposition Modeling and Thermally Induced Phase Separation

Appearing as one of the key-components of lithium-ion batteries (LIBs), this work specifically focuses on the additive manufacturing (AM) of custom-shape separators, facilitated by the filament material extrusion process, also called fused deposition modeling (FDM). The development and optimization of composite thermoplastic filament feedstocks combining polypropylene and paraffin wax, followed by the 3D printing of the separator membranes is shown. A post-processing step, based on thermal induced phase separation (TIPS), is introduced to promote porosity formation through removal of the paraffin wax sacrificial phase within the 3D printed items. Separators with different polypropylene/paraffin wax ratios are developed and the impact on printability, mechanical strength, porosity, and electrochemical performances, is thoroughly discussed. X-ray micro-computed tomography is employed to assess the geometric fidelity and to detect printing defects in a complex 3D lattice structure. The performance of the 3D printed porous separators is also compared to a commercial separator. This pioneering research establishes a foundation for the creation of porous separators that can adapt to and conform into 3D printed battery architectures with novel form factors, and also creates opportunities for the use of FDM and TIPS for a wide range of applications that employ porous structures beyond the energy storage field.

3D printing↗
DOE OSTI2024

A Vitrimer Acts as a Compatibilizer for Polyethylene and Polypropylene Blends

Abstract Polymer compatibilization plays a critical role in achieving polymer blends with favorable mechanical properties and enabling efficient recycling of mixed plastic wastes. Nonetheless, traditional compatibilization methods often require tailored designs based on the specific chemical compositions of the blends. In this study, we propose a new approach for compatibilizing polymer blends using a dynamically crosslinked polymer network, known as vitrimers. By adding a relatively small amount (1–5 w/w%) of a vitrimer made of siloxane‐crosslinked high‐density polyethylene (HDPE), we successfully compatibilized unmodified HDPE and isotactic polypropylene (iPP). The vitrimer‐compatibilized blend exhibited enhanced elongation at break (120 %) and smaller iPP domain sizes (0.4 μm) compared to the control blend (22 % elongation at break, 0.9 μm iPP droplet size). Moreover, the vitrimer‐compatibilized blend showed significantly improved microphase stability during annealing at 180 °C. This straightforward method shows promise for applications across various polymer blend systems.

Yokoyama, Kosuke↗
DOE OSTI2024

A Vitrimer Acts as a Compatibilizer for Polyethylene and Polypropylene Blends

Polymer compatibilization plays a critical role in achieving polymer blends with favorable mechanical properties and enabling efficient recycling of mixed plastic wastes. Nonetheless, traditional compatibilization methods often require tailored designs based on the specific chemical compositions of the blends. In this study, we propose a new approach for compatibilizing polymer blends using a dynamically crosslinked polymer network, known as vitrimers. By adding a relatively small amount (1–5 w/w%) of a vitrimer made of siloxane‐crosslinked high‐density polyethylene (HDPE), we successfully compatibilized unmodified HDPE and isotactic polypropylene (iPP). The vitrimer‐compatibilized blend exhibited enhanced elongation at break (120 %) and smaller iPP domain sizes (0.4 μm) compared to the control blend (22 % elongation at break, 0.9 μm iPP droplet size). Moreover, the vitrimer‐compatibilized blend showed significantly improved microphase stability during annealing at 180 °C. This straightforward method shows promise for applications across various polymer blend systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Progress on Photo‐, Electro‐, and Photoelectro‐Catalytic Conversion of Recalcitrant Polyethylene, Polypropylene, and Polystyrene ‐ A Review

Abstract Recalcitrant waste plastics such a polyethylene, polypropylene, and polystyrene are difficult to recycle and are mostly disposed of in landfills and eventually leached into the environmental as micro‐ and nano‐plastics. This review explores how photo‐, electro‐, and combined photoelectro‐catalytic processes can assist in the degradation and upcycling of waste plastic into different chemicals and mitigate their release to the environment. In this work, we discuss how the different reaction mechanisms proceed, explore the current relevant literature, and highlight the developments needed to advance the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Correlating processing variables to material properties in recycled polypropylene: A data‐driven approach

Abstract Polypropylene (PP) is one of the most widely used plastics, yet its recycling remains limited, with less than 1% of solid waste PP being reprocessed. Mechanical recycling through extrusion is the most practical method, but inconsistent reprocessing conditions introduce variability in material properties. While temperature, screw speed, and residence time influence the thermomechanical stress applied during reprocessing, there are no standardized guidelines for optimizing these parameters. This study examines how these factors shape the properties of recycled PP, using conditions designed to mimic post‐industrial recycled (PIR) scrap. Residence time was measured using colorimetric tracking and correlated with molecular weight, viscosity, and mechanical properties over multiple extrusion cycles. Data‐driven modeling, including response surface methodology, support vector machines, and artificial neural networks, identified processing temperature as the dominant factor in material degradation, followed by residence time. Mechanical properties remained stable, while viscosity decreased predictably with increasing residence time. By linking reprocessing conditions to property evolution, this study provides a method to optimize processing parameters and reduce variability in recycled PP. These findings help manufacturers improve process control, making recycled PP more predictable for reuse in manufacturing. Highlights Study of PIR‐quality PP without additives or compatibilizers. Residence time analysis shows processing temperature drives PP property changes. Mark‐Houwink enables quick molecular weight checks for quality control. Models predict mechanical and rheological shifts in reprocessing. Optimized processing parameters minimize property degradation in recycling.

Estela‐García, John E. [Polymer Engineering Center↗
DOE OSTI2024

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗
DOE OSTI2021

Performance of hybridized bamboo-carbon fiber reinforced polypropylene composites processed using wet laid technique

The end-of-life vehicles (ELV) regulations motivate hybrid materials usage in automotive industries to optimize properties at reduced cost and increase eco-friendly designs. This research explores hybrid compositions of natural bamboo fiber and synthetic carbon fiber. The goal of hybridization was to synergistically benefit from each constituent– i.e., sustainability, energy absorption and superior damping from bamboo, and high strength and stiffness from carbon fiber. Carbon fibers (CF), bamboo fibers (BF) and polypropylene (PP) fibers were dispersed in water to produce wet-laid hybrid mats. The mats were compression molded into consolidated panels to obtain the hybrid composite(s) (BF-CF-PP). Four formulations with different fiber-resin weight percent were designed and produced including- BF-PP (30/70), BF-PP (50/50), BF-CF-PP (32/8/60), and BF-CF-PP (8/32/60). The effect of (a) fiber length, (b) surface treatment, (c) fiber content, and (d) consolidation pressure on the mechanical properties were examined. The improved mechanical (flexural strength 76.4 MPa, flexural modulus 4.1 GPa, ILSS 12.4 MPa and impact strength 49.9 KJ/m 2 ) and vibrational damping (1.05%) properties showed that the BF-CF-PP (8/32/60) provided higher properties compared to the other variants. The projected properties at various stoichiometric ratios of carbon and bamboo fiber revealed that the properties of hybrid composites could be tailored to produce desirable, cost-effective, and sustainable automotive components.

36 MATERIALS SCIENCE↗