Search NASASearch

SEARCH · Search NASA

Results for “POTENTIAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Three-dimensional potential flows from functions of a 3D complex variable

Potential, or ideal, flow velocities can be found from the gradient of an harmonic function. An ordinary complex valued analytic function can be written as the sum of two real valued functions, both of which are harmonic. Thus, 2D complex valued functions serve as a source of functions that describe two-dimensional potential flows. However, this use of complex variables has been limited to two-dimensions. Recently, a new system of three-dimensional complex variables has been developed at the NASA Ames Research Center. As a step toward application of this theory to the analysis of 3D potential flow, several functions of a three-dimensional complex variable have been investigated. The results for two such functions, the 3D exponential and 3D logarithm, are presented in this paper. Potential flows found from these functions are investigated. Important characteristics of these flows fields are noted.

Kelly, Patrick

Potential flow in two-dimensional deflected nozzles

Three programs analyze flow: SCIRCL, geometry definition program; 24Y, incompressible two-dimensional potential-flow program; and NOZZLEC, program combining incompressible potential-flow solutions into solutions of interest after compressibility correction. Program group is written in FORTRAN IV for implementation on UNIVAC 1100/42.

Hawk, J. D.

Potential Flow Interactions With Directional Solidification

The effect of convective melt motion on the growth of morphological instabilities in crystal growth has been the focus of many studies in the past decade. While most of the efforts have been directed towards investigating the linear stability aspects, relatively little attention has been devoted to experimental and numerical studies. In a pure morphological case, when there is no flow, morphological changes in the solid-liquid interface are governed by heat conduction and solute distribution. Under the influence of a convective motion, both heat and solute are redistributed, thereby affecting the intrinsic morphological phenomenon. The overall effect of the convective motion could be either stabilizing or destabilizing. Recent investigations have predicted stabilization by a flow parallel to the interface. In the case of non-parallel flows, e.g., stagnation point flow, Brattkus and Davis have found a new flow-induced morphological instability that occurs at long wavelengths and also consists of waves propagating against the flow. Other studies have addressed the nonlinear aspects (Konstantinos and Brown, Wollkind and Segel)). In contrast to the earlier studies, our present investigation focuses on the effects of the potential flow fields typically encountered in Hele-Shaw cells. Such a Hele-Shaw cell can simulate a gravity-free environment in the sense that buoyancy-driven convection is largely suppressed, and hence negligible. Our interest lies both in analyzing the linear stability of the solidification process in the presence of potential flow fields, as well as in performing high-accuracy nonlinear simulations. Linear stability analysis can be performed for the flow configuration mentioned above. It is observed that a parallel potential flow is stabilizing and gives rise to waves traveling downstream. We have built a highly accurate numerical scheme which is validated at small amplitudes by comparing with the analytically predicted results for the pure morphological case. We have been able to observe nonlinear effects at larger times. Preliminary results for the case when flow is imposed also provide good validation at small amplitudes.

Buddhavarapu, Sudhir S.

Calculations of transonic potential flows by a parameter free procedure

A parameter-free computational procedure for transonic potential flows around an airfoil is presented. The method is based on an inexact, Newton-like iterative scheme, and a preconditioned minimal residual algorithm is used to solve the linear system of equations arising at each iterate. This iterative procedure is formulated so that the difficulties associated with the approximate factorization technique, namely the requirement of iteration parameters and the boundary conditions for the intermediate variable are eliminated. Numerical experiments are given for potential flows around NACA 0012 airfoil with different Mach numbers and different angles of attack. These results are then compared with those obtained by the approximate factorization techniques.

Wong, Y. S.

Spectral multigrid methods with applications to transonic potential flow

Spectral multigrid methods are demonstrated to be a competitive technique for solving the transonic potential flow equation. The spectral discretization, the relaxation scheme, and the multigrid techniques are described in detail. Significant departures from current approaches are first illustrated on several linear problems. The principal applications and examples, however, are for compressible potential flow. These examples include the relatively challenging case of supercritical flow over a lifting airfoil.

Streett, C. L.

Spectral multigrid methods with applications to transonic potential flow

Spectral multigrid methods are demonstrated to be a competitive technique for solving the transonic potential flow equation. The spectral discretization, the relaxation scheme, and the multigrid techniques are described in detail. Significant departures from current approaches are first illustrated on several linear problems. The principal applications and examples, however, are for compressible potential flow. These examples include the relatively challenging case of supercritical flow over a lifting airfoil.

Streett, C. L.

Calculation of potential flow past airship bodies in yaw

An outline of Von Karman's method of computing the potential flow of airships in yaw by means of partially constant dipolar superposition on the axis of the body is followed by several considerations for beginning and end of the superposition. Then this method is improved by postulating a continuous, in part linearly variable dipolar superposition on the axis. The second main part of the report brings the calculation of the potential flow by means of sources and sinks, arranged on the surface of the airship body. The integral equation which must satisfy this surface superposition is posed, and the core reduced to functions developed from whole elliptical normal integrals. The functions are shown diagrammatically. The integration is resolvable by iteration. The consequence of the method is good. The formulas for computing the velocity on the surface and of the potential for any point conclude the report.

Lotz, I

Small-amplitude viscous motion on arbitrary potential flows

This paper is concerned with small-amplitude, unsteady, vortical and entropic motion imposed on steady potential flows. It is restricted to the case where the spatial scale of the unsteady motion is small compared to that of the mean flow. Under such conditions, the unsteady motion may be influenced by viscosity even if the mean flow is not. An exact high-frequency (small-wavelength) solution is obtained for the small-amplitude viscous motion imposed on a steady potential flow. It generalizes the one obtained by Pearson (1959) for the homogeneous-strain case to the case of quasi-homogeneous strain. This result is used to study the effect of viscosity on rapidly distorted turbulent flows. Specific numerical results are given for a turbulent flow near a two-dimensional stagnation point.

Goldstein, M. E.

Improved axisymmetric potential flow computer program

Basic method of calculating potential flow has been refined to increase accuracy of results and to reduce computational time. Program calculates low speed flows about or within bodies of axially symmetric shape. Solid body, inlet, and purely internal flow problems can be solved.

Hess, J. L.

Comparison of uniform perturbation solutions and numerical solutions for some potential flows past slender bodies

Approximate solutions for potential flow past an axisymmetric slender body and past a thin airfoil are calculated using a uniform perturbation method and then compared with either the exact analytical solution or the solution obtained using a purely numerical method. The perturbation method is based upon a representation of the disturbance flow as the superposition of singularities distributed entirely within the body, while the numerical (panel) method is based upon a distribution of singularities on the surface of the body. It is found that the perturbation method provides very good results for small values of the slenderness ratio and for small angles of attack. Moreover, for comparable accuracy, the perturbation method is simpler to implement, requires less computer memory, and generally uses less computation time than the panel method. In particular, the uniform perturbation method yields good resolution near the regions of the leading and trailing edges where other methods fail or require special attention.

Wong, T. C.

Comparison of uniform perturbation and numerical solutions for some potential flows past slender bodies

Approximate solutions for potential flow past an axisymmetric slender body and past a thin airfoil are calculated using a uniform perturbation method and then compared with either the exact analytical solution or the solution obtained using a purely numerical method. The perturbation method is based upon a representation of the disturbance flow as the superposition of singularities distributed entirely within the body, while the numerical (panel) method is based upon a distribution of singularities on the surface of the body. It is found that the perturbation method provides very good results for small values of the slenderness ratio and for small angles of attack. Moreover, for comparable accuracy, the perturbation method is simpler to implement, requires less computer memory, and generally uses less computation time than the panel method. In particular, the uniform perturbation method yields good resolution near the regions of the leading and trailing edges where other methods fail or require special attention.

Wong, T.-C.

A spectral method for the solution of transonic potential flow about an arbitrary two-dimensional airfoil

The application of a spectral method to the computation of transonic potential flow about an arbitrary lifting airfoil is discussed. An iterative solution algorithm is described, which was found to be robust, fairly efficient, and fit well in a multigrid coontext. Details of the application to the transonic potential flow problem are given. Results from the spectral technique for both subcritical flow and supercritical flow with shocks are given and compared with results from state-of-the-art finite-difference airfoil codes.

Streett, C. L.

Three-dimensional transonic potential flow about complex 3-dimensional configurations

An analysis has been developed and a computer code written to predict three-dimensional subsonic or transonic potential flow fields about lifting or nonlifting configurations. Possible condfigurations include inlets, nacelles, nacelles with ground planes, S-ducts, turboprop nacelles, wings, and wing-pylon-nacelle combinations. The solution of the full partial differential equation for compressible potential flow written in terms of a velocity potential is obtained using finite differences, line relaxation, and multigrid. The analysis uses either a cylindrical or Cartesian coordinate system. The computational mesh is not body fitted. The analysis has been programmed in FORTRAN for both the CDC CYBER 203 and the CRAY-1 computers. Comparisons of computed results with experimental measurement are presented. Descriptions of the program input and output formats are included.

Reyhner, T. A.

Computer prediction of three-dimensional potential flow fields in which aircraft propellers operate: Computer program description and users manual

A method was developed for predicting the potential flow velocity field at the plane of a propeller operating under the influence of a wing-fuselage-cowl or nacelle combination. A computer program was written which predicts the three dimensional potential flow field. The contents of the program, its input data, and its output results are described.

Jumper, S. J.

Advanced Small Perturbation Potential Flow Theory for Unsteady Aerodynamic and Aeroelastic Analyses

An advanced small perturbation (ASP) potential flow theory has been developed to improve upon the classical transonic small perturbation (TSP) theories that have been used in various computer codes. These computer codes are typically used for unsteady aerodynamic and aeroelastic analyses in the nonlinear transonic flight regime. The codes exploit the simplicity of stationary Cartesian meshes with the movement or deformation of the configuration under consideration incorporated into the solution algorithm through a planar surface boundary condition. The new ASP theory was developed methodically by first determining the essential elements required to produce full-potential-like solutions with a small perturbation approach on the requisite Cartesian grid. This level of accuracy required a higher-order streamwise mass flux and a mass conserving surface boundary condition. The ASP theory was further developed by determining the essential elements required to produce results that agreed well with Euler solutions. This level of accuracy required mass conserving entropy and vorticity effects, and second-order terms in the trailing wake boundary condition. Finally, an integral boundary layer procedure, applicable to both attached and shock-induced separated flows, was incorporated for viscous effects. The resulting ASP potential flow theory, including entropy, vorticity, and viscous effects, is shown to be mathematically more appropriate and computationally more accurate than the classical TSP theories. The formulaic details of the ASP theory are described fully and the improvements are demonstrated through careful comparisons with accepted alternative results and experimental data. The new theory has been used as the basis for a new computer code called ASP3D (Advanced Small Perturbation - 3D), which also is briefly described with representative results.

Batina, John T.

Acoustic tests of a 15.2 centimeter-diameter potential flow convergent nozzle

An experimental investigation of the jet noise radiated to the far field from a 15.2-cm-diam potential flow convergent nozzle has been conducted. Tests were made with unheated airflow over a range of subsonic nozzle exhaust velocities from 62 to 310m/sec. Mean and turbulent velocity measurements in the flow field of the nozzle exhaust indicated no apparent flow anomalies. Acoustic measurements yielded data uncontaminated by internal and/or background noise to velocities as low as 152m/sec. Finally, no significantly different acoustic characteristics between the potential flow nozzle and simple convergent nozzles were found.

Karchmer, A. M.