Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY INVESTMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Tides on South Mill Apartment Complex

This dataset includes data from the building management system for a large multi-family rental property located in Tempe, Arizona. The name of this rental property is “Tides on South Mill” and it is owned by the FCP which is a real-estate investment company based in Maryland with a large portfolio of rental properties that spreads out throughout the U.S. FCP’s portfolio includes large multi-family housing and commercial buildings. The property is split into four quadrants. Each quadrant has roughly 130 apartments. The total floor area of each Quadrant is about 94,000 sq. ft. The campus of Solara spreads over 27 acres. The mechanical system consists of a 2-pipe system that runs chilled or hot water thru individual Fan Coil Units depending upon the season. The gas-fired boiler will supply hot water when seasonal change-over will take place. This dataset spans October to December 2021 and includes time-series measurements corresponding electricity meter data (Cooling Tower Fan, Pumps, Chillers,) with 1-minute resolution, chilled water temperature data and outside air data with 5-minute resolution etc. as CSV files. In addition to the measurements, a metadata .json file, and a .pdf dataset description file are also included.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Reflection and transmission of a wave incident on a slab with a time-periodic dielectric function {epsilon}(t)

We present a theoretical description of the response of a dynamic slab, with time-periodic dielectric function {epsilon}(t), to a normally incident monochromatic plane wave of frequency {omega}{sub o}. As a consequence of the interaction of this incoming wave with the dynamic slab, the reflected and transmitted waves contain harmonics of the modulating frequency {omega}, namely, the slab itself becomes a polychromatic source of frequencies {omega}{sub o}-n{omega}(n=0,{+-}1,{+-}2,...). We establish a general formalism to quantify the reflected and transmitted fields for any periodic variation in the dielectric function. To achieve this, a description of wave propagation in a dynamic bulk is needed. A theoretical framework to treat such propagation, based on the concept of a temporal photonic crystal, is developed. As a consequence of the Bloch-Floquet theorem, the dispersion relation is a band structure that is periodic with frequency and exhibits forbidden wave vector gaps. The Poynting vectors of the transmitted and reflected fields are analyzed in detail. Our theory is applied to the case in which the dielectric function is modulated sinusoidally. We calculate numerically the magnitudes and phases of the reflection and transmission coefficients for several harmonics {omega}{sub o}-n{omega} and slab thicknesses. Three modulation regimes are considered: weak, moderate, and strong. The response in the weak regime is similar to that of a Fabry-Perot etalon--the strengths of the harmonics are weak. For the strong-modulation regime, the strengths of reflection and transmission coefficients of the harmonics become large; they can even exceed one due to the openness of the system in which an external modulating agent can provide part of the invested energy. Dynamic variation in the dielectric properties of materials can give rise to new effects in wave propagation and to novel optical applications and is readily attainable with present-day technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Case Study of the Maplewood Park Multifamily Retrofit for Energy Efficiency

Maplewood Park (Maplewood), a 110-unit multifamily apartment complex in Union City, Georgia, completed major renovations under the guidance of a third-party green building certification program in October 2012. Oak Ridge National Laboratory (ORNL) partnered with Southface Energy Institute (Southface) to use this project as a case study of energy retrofits in low-rise, garden-style, multifamily buildings in the southeastern United States. This report provides a comprehensive profile of this project including the project economics, findings of the building audit, and results of the analysis of energy retrofit measures specific to this project. With a main focus of energy retrofits, this report aims to discuss other aspects of multifamily building retrofit that would benefit future projects in terms of improved building audit process, streamlined tasks, and higher energy savings in low-rise, garden-style apartments. Maplewood received Low Income Housing Tax Credit (LIHTC) financing via the 2010 Georgia Qualified Allocation Plan (QAP). To be eligible for QAP funds in Georgia, all major renovations must incorporate energy-efficiency measures and adopt a third-party green building certification. Because of the unique demands of this financing, including requirements for long-term ownership, property owners were also especially motivated to invest in upgrades that will increase durability and comfort while reducing the energy cost for the tenants.

Kim, Euy-Jin↗

Design and Development of Low Weight, Titanium Aluminide Airfoils for High Performance Industrial Gas Turbines meeting 65% Combined Cycle Efficiency (Final Report)

This project funded under DOE-FOA-0001816 was performed with the intent of evaluating the potential of utilizing a low density, high specific strength Titanium Aluminide (TiAl) alloy in a large annulus last stage gas turbine blade with the intent of improving combined cycle gas turbine efficiency toward a goal of reaching 65% efficiency. The project consisted of identifying a potentially suitable TiAl material for manufacture of such a large blade by investment casting. This included estimation of design properties for the selected alloy, trade studies using a baseline design created for a nickel based alloy cast in the TiAl alloy to evaluate potential design changes required for the use of this material and optimization of a prototype design for the same baseline application using the selected TiAl alloy. Several rounds of optimization were completed with the intent of meeting the baseline design targets with a resulting design that showed at least equivalent performance in terms of creep, LCF/TMF, HCF and aerodynamic damping potential. While it was found that significant reductions in blade loading on the disk were possible, the design resulting from the optimization met most lifing targets at the baseline size, but showed a reduction in margins in some areas in comparison to the Ni-based baseline design. Additionally, it was found that the low strain tolerance of the TiAl alloy for temperatures at and below the operational temperature of the attachment resulted in marginal, although still acceptable, creep rupture performance of the design. Due to results indicating the reduced potential for increasing turbine annulus compared to expectations a Phase II award was not proposed and it is not recommended to pursue additional design optimization efforts until further material advances with TiAl materials are achieved.

03 NATURAL GAS↗

Multi-Physics Analysis of the Fermilab Booster RF Cavity

After about 40 years of operation the RF accelerating cavities in Fermilab Booster need an upgrade to improve their reliability and to increase the repetition rate in order to support a future experimental program. An increase in the repetitio n rate from 7 to 15 Hz entails increasing the power dissipation in the RF cavities, their ferrite loaded tuners, and HOM dampers. The increased duty factor requires careful modelling for the RF heating effects in the cavity. A multi-physic analysis invest igating both the RF and thermal properties of Booster cavity under various operating conditions is presented in this paper.

43 PARTICLE ACCELERATORS↗

Covariant Density Functional Theory in Nuclear Physics and Astrophysics

How does subatomic matter organize itself? Neutron stars are cosmic laboratories uniquely poised to answer this fundamental question that lies at the heart of nuclear science. Newly commissioned rare isotope facilities, telescopes operating across the entire electromagnetic spectrum, and ever more sensitive gravitational wave detectors will probe the properties of neutron-rich matter with unprecedented precision over an enormous range of densities. A coordinated effort between observation, experiment, and theoretical research is of paramount importance for realizing the full potential of these investments. Theoretical nuclear physics provides valuable insights into the properties of neutron-rich matter in regimes that are not presently accessible to experiment or observation. In particular, nuclear density functional theory is likely the only tractable framework that can bridge the entire nuclear landscape by connecting finite nuclei to neutron stars. This compelling connection is the main scope of the present review.

79 ASTRONOMY AND ASTROPHYSICS↗

Extreme heat vulnerability of manufactured housing in arid urban environments

This article explores the role of land cover in relation to housing type and tenure in shaping exposure to extreme urban heat, focusing on residents of mobile and manufactured housing (MH). We hypothesize that MH residents will experience greater exposure to extreme heat than those living in other housing types due to lower levels of proximate vegetation. This hypothesis is based on the unique property relations and tenure regimes that characterize MH, which may disincentivize investments in planting and maintaining trees and vegetation in arid environments. To test this hypothesis, we compare the amount of vegetation on properties across housing types, within-type tenure arrangements and between three urbanized areas in Arizona with different levels of exposure to extreme heat. To conduct this comparison, we combine multispectral land cover data for 1.7 million parcels with tax assessor data and building footprints to measure land cover at a high resolution. We find that MH units have significantly less vegetation than single-family residential properties, and that MH units in MH parks have less vegetation than those on individual lots. We conclude that municipalities should promote (e.g. through incentives or other policy interventions) the planting of more vegetation around MH units where there is a risk of extreme heat exposure. Future research can expand this analysis with a closer examination of how municipal ordinances and policies affect land cover by housing type and tenure.

heat↗

Basic Research Needs Workshop on Quantum Materials for Energy Relevant Technology

Imagine future computers that can perform calculations a million times faster than today’s most powerful supercomputers at only a tiny fraction of the energy cost. Imagine power being generated, stored, and then transported across the national grid with nearly no loss. Imagine ultrasensitive sensors that keep us in the loop on what is happening at home or work, warn us when something is going wrong around us, keep us safe from pathogens, and provide unprecedented control of manufacturing and chemical processes. And imagine smart windows, smart clothes, smart buildings, supersmart personal electronics, and many other items — all made from materials that can change their properties “on demand” to carry out the functions we want. The key to attaining these technological possibilities in the 21st century is a new class of materials largely unknown to the general public at this time but destined to become as familiar as silicon. Welcome to the world of quantum materials — materials in which the extraordinary effects of quantum mechanics give rise to exotic and often incredible properties. To realize the tantalizing potential of quantum materials, there is much basic scientific research to be done. Recognizing the high potential impact of quantum materials, nations around the world are already investing in this effort. We must learn how the astonishing properties of quantum materials can be tailored to address our most pressing technological needs, and we must dramatically improve our ability to synthesize, characterize, and control quantum materials. To accelerate the progress of quantum materials research, the U.S. Department of Energy’s Office of Science, Office of Basic Energy Sciences (BES), sponsored a “Basic Research Needs Workshop on Quantum Materials for Energy-relevant Technology,” which was held near Washington, D.C. on February 8–10, 2016. Attended by more than 100 leading national and international scientific experts in the synthesis, characterization, and theory of quantum materials, the workshop identified four priority research directions (PRDs) that will lay the foundation to better understand quantum materials and harness their rich technological potential.

36 MATERIALS SCIENCE↗

Resilience Framework for Electric Energy Delivery Systems (R.1)

The intent of this document is to provide a Resilience Framework for electrical energy delivery systems which can be applied to Distributed Wind. However, the framework is not limited by application to any resource or system. This framework represents the defined steps to a cyclical process similar in mechanism to both cybersecurity and risk frameworks, while providing a common set of language and process for all stakeholders involved. The need for this Resilience Framework was established in a previous document, “Distributed Wind Resilience Metrics for Electric Energy Delivery Systems.” One important characteristic we see in resilience is the unique needs and perspectives of different systems, geographies, resources, stakeholders, perceived risks, and consequences, which we term the distinctiveness property. This distinctiveness property drives the requirement to have a resilience framework or methodology that can be implemented by different types of organizations and systems. The process or methodology should be cyclic. Recognizing that a system’s resilience is based on finite resources and time, it must continually evolve through this framework’s risk management and capital investment steps at an appropriate pace for its distinctiveness property.

17 WIND ENERGY↗

Can machine learning predict fuel properties accurately?

High-potential molecules derived from biomass sources may suitably replace or supplement traditional nonrenewable hydrocarbon fuels to reduce pollution and fuel processing cost. Experimental property testing of these bioproducts is usually conducted years after initial bench-scale experiments, due to high experimental costs and/or high volume requirements. However, neglecting to conduct property testing early in the pathway development cycle can lead to investments spent on scaling-up production of bioproducts and biofuels that do not perform as expected. Instead, machine-learning techniques can be used to develop quantitative structure–property relationships for molecules using a relatively large training set of molecular descriptor data. For this study, we compiled measured properties, IR spectra, and molecular descriptors of bio-based molecules from databases and published studies for training models of bioproduct properties. We trained regression models with molecular descriptors and will compare results of different estimators. This study describes the first steps towards a performance prediction tool for bio-based alternative fuels. Keywords: Machine learning, biofuels, jet fuels, fuel properties

Mayer, Morgan A.↗

U.S. Solar Market Value Report: Further Evidence that Solar Adds Value to Real Estate

Solar photovoltaic systems provide cost savings to the property owner in terms of avoided electricity costs that accrue over the system lifetime. From an investment standpoint, the equipment and the value of the energy generated can potentially increase the underlying property value. This first-of-a-kind study presents real market data collected from real estate appraisers using the PV Value® tool to develop a market value for solar as part of a property sale or refinance. Aggregated results at the state level are discussed for California, Arizona and Massachusetts, using 2015 and 2016 data where appraisers used the income capitalization approach to develop a market value for solar. Additional data collection using future transaction data could reveal market-specific trends and insights at the zip code, city and metropolitan statistical area (MSA) levels.

14 SOLAR ENERGY↗

Response Predicting LTCC Firing Shrinkage: A Response Surface Analysis Study

The Low Temperature Cofired Ceramic (LTCC) technology is used in a variety of applications including military/space electronics, wireless communication, MEMS, medical and automotive electronics. The use of LTCC is growing due to the low cost of investment, short development time, good electrical and mechanical properties, high reliability, and flexibility in design integration (3 dimensional (3D) microstructures with cavities are possible)). The dimensional accuracy of the resulting x/y shrinkage of LTCC substrates is responsible for component assembly problems with the tolerance effect that increases in relation to the substrate size. Response Surface Analysis was used to predict product shrinkage based on specific process inputs (metal loading, layer count, lamination pressure, and tape thickness) with the ultimate goal to optimize manufacturing outputs (NC files, stencils, and screens) in achieving the final product design the first time. Three (3) regression models were developed for the DuPont 951 tape system with DuPont 5734 gold metallization based on green tape thickness.

36 MATERIALS SCIENCE↗

Electrochemical Deposition of Aluminum-Based Coatings From Aqueous Systems

The electroplating of aluminum has represented a challenge for the coatings industry for decades. The reactivity of aluminum metal leads to a very negative reduction potential. This leads to abundant gas evolution instead of aluminum reduction in water. Current aluminum deposition technology overcomes this limitation by excluding oxygen and water from the process with rigorously dry solvent and airtight plating tanks. These adaptations yield metallic aluminum depositions with significant impurities affecting its properties. In addition, this approach requires a great capital investment and cost of process maintenance. An alternative approach to Al electrodeposition has been developed based on the the use of organic ligands to stabilize the Al3+ ion in water-based solutions. By using a ligation approach, we can create aluminum species that remain stable in water while lowering the reduction potential of the aluminum complex by 0.5V. This improvement in reduction potential gives the possibility for the deposition of aluminum without significant competition from hydrogen evolution. With this platform we can deposit highly adherent aluminum-based layers on metal surfaces. The aluminum/aluminum oxide layers appear as thin, coherent and highly adherent coatings. This aluminum/alumina layer can then be chemically treated to achieve desirable surface properties which were previously inaccessible. For example, the coating can be made hydrophobic, highly adherent to different polymer coatings or even dyed using common anodizing dyes.

36 MATERIALS SCIENCE↗

ELECTROCHEMICAL DEPOSITION OF ALUMINUM-BASED COATINGS FROM AQUEOUS SYSTEMS

The electroplating of aluminum has represented a challenge for the coatings industry for decades. The reactivity of aluminum metal leads to a very negative reduction potential. This leads to abundant gas evolution instead of aluminum reduction in water. Current aluminum deposition technology overcomes this limitation by excluding oxygen and water from the process with rigorously dry solvent and airtight plating tanks. These adaptations yield metallic aluminum depositions with significant impurities affecting its properties. In addition, this approach requires a great capital investment and cost of process maintenance. An alternative approach to Al electrodeposition has been developed based on the the use of organic ligands to stabilize the Al3+ ion in water-based solutions. By using a ligation approach, we can create aluminum species that remain stable in water while lowering the reduction potential of the aluminum complex by 0.5V. This improvement in reduction potential gives the possibility for the deposition of aluminum without significant competition from hydrogen evolution. With this platform we can deposit highly adherent aluminum-based layers on metal surfaces. The aluminum/aluminum oxide layers appear as thin, coherent and highly adherent coatings. This aluminum/alumina layer can then be chemically treated to achieve desirable surface properties which were previously inaccessible. For example, the coating can be made hydrophobic, highly adherent to different polymer coatings or even dyed using common anodizing dyes.

36 MATERIALS SCIENCE↗

emPower 3.0 (Santa Barbara Final Technical Report)

This report serves as the Final Report for Santa Barbara County’s Energy Efficiency and Conservation Block Grant (EECBG) BetterBuildings Neighborhood Program (BBNP) award from the U.S. Department of Energy (DOE). This report explains how DOE BBNP funding was invested to develop robust program infrastructure designed to help property owners complete energy improvements, thereby generating substantial outcomes for the local environment and economy. It provides an overview of program development and design within the grant period, program accomplishments and challenges to date, and a plan for the future sustainability of emPower, the County’s innovative clean energy and building efficiency program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Towards efficient light emitters via computational design of molecules with inverted singlet-triplet gaps

To move toward rational design of efficient organic light emitting diodes based on the radical idea of inverted singlet-triplet gap (INVEST) systems, we propose a set of novel quantum chemical approaches, predictive but low-cost, to unveil a set of structural-property relationships. We perform a computational study of a series of substituted molecules based on a small set of known INVEST molecules. Our study demonstrates a high degree of correlation between the intramolecular charge transfer and the singlet-triplet energy gap and hints towards the use of a quantitative estimate of charge transfer to predict and modulate these energy gaps. We aim to create a database of INVEST molecules that includes accurate benchmarks of singlet-triplet energy gaps. Furthermore, we aim to link structural features and molecular properties, enabling a control knob for rational design.

42 ENGINEERING↗

Refueling Infrastructure Deployment in Low-Income and Non-Urban Communities

The U.S. National Blueprint for Transportation Decarbonization identifies the need to invest in infrastructure supporting low- and zero-emission vehicles, especially in low-income and overburdened communities, to eliminate nearly all greenhouse gas emissions from the transportation sector by 2050. The alternative fuel vehicle refueling property tax credit (26 U.S. Code § 30C) includes eligibility criteria intended to encourage investment in underserved communities based on the economic characteristics or urban character of the census tract in which the fueling infrastructure is installed. Eligible census tracts are those that qualify for the New Markets Tax Credit or that are not located within urban areas as defined by the U.S. Census Bureau. This study quantifies how many fueling-related amenities are currently located in census tracts that qualify and do not qualify for the 30C tax credit based on IRS Notice 2024-20. For existing electric vehicle charging stations, 51% of Level 2 and 60% of Direct Current Fast Charging public stations are located in eligible census tracts. 73% of natural gas, propane, and hydrogen fueling stations are in qualifying census tracts and 75% of biodiesel and renewable fuel stations are in qualifying census tracts. This compares with 73% of existing gas stations in eligible census tracts. For deploying the refueling infrastructure to satisfy future demand, this study shows that truck stops (94%), commercial truck stops (92%), and Federal Highway alternative fuel corridors (89%) are predominantly located in eligible locations. Additionally, significant percentages of the population (62%), light-duty vehicle registrations (64%), and medium- and heavy-duty vehicle registrations (68%) fall within eligible areas.

33 ADVANCED PROPULSION SYSTEMS↗

Polar Bear™ – Innovative Capture of Storage Tank Vapors

Polar Bear™ is a patented technology developed by the Energy & Environmental Research Center (EERC) to capture storage tank vapors and eliminate methane emissions from upstream oil- and gas-producing facilities. Sparked by early commercial investment, the EERC licensed the technology and extended the intellectual property to storage tanks. Polar Bear™ is uniquely engineered and adapted to individual lower-producing facilities where there is otherwise no economic alternative for capturing tank vapors. A high number of small producing oil and gas wells are distributed across the country. The aggregate contributes to a significant volume of emissions. Because of the lack of economy of scale, gas volumes from these facilities are typically not recovered and contribute to methane emissions. Polar Bear™ provides a fit-for-purpose compression solution that addresses cost by reducing complexity with respect to conventional vapor recovery units and eliminating oil changes. Unique to Polar Bear™ is the capability to separate oxygenated gas from storage tank vapors. Storage tanks are designed to “breathe,” allowing gas to enter and escape during internal level and temperature changes. This infiltration of air into the tank headspace imparts undesirable oxygen content with respect to pipeline gathering. Polar Bear™ separates the vapor stream, allowing oxygen-rich gas to be used as fuel on-site while recovering the liquids-rich portion of the gas where oxygen content is minimized. A prototype system was tested to verify process models, evaluate operational performance, and advance the technology readiness level from 5 to 6. Results provide a good match between experimental measurements and process models, indicating the models are useful for future scale-up and field design. Various mixtures of nitrogen and liquefied petroleum gas were tested to understand the mass balance of nitrogen and how it relates to the potential control of oxygen content. Findings indicate that less than 2000 ppm of oxygen is likely to remain in the liquid portion of the gas in field applications. The research and development prepare the technology for field implementation to eliminate routine and fugitive methane emissions from storage tanks.

02 PETROLEUM↗