Search NASA⌕ Search

SEARCH · Search NASA

Results for “Paper Based Procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Generalized quadratic weights for asymptotic regulator properties

The paper describes a generalized quadratic weight selection procedure based on asymptotic modal properties of linear-quadratic regulators as control weights tend to zero. Explicit formulas are developed for weighting matrices which produce an asymptotic eigenstructure consisting of p no greater than n - m finite modes, with the rest tending to infinity in selectable Butterworth patterns or determined by other secondary design considerations.

Stein, G.↗
NASA NTRS1979

Robustness with observers

The paper describes an adjustment procedure for observer-based linear control systems which asymptotically achieves the same loop transfer functions (and hence the same relative stability, robustness, and disturbance rejection properties) as full-state feedback control implementations. Full-state loop-transfer properties can be recovered asymptotically if the plant is minimum phase; this occurs at the expense of noise performance.

Doyle, J. C.↗
NASA NTRS1979

Generalized quadratic weights for asymptotic regulator properties

This paper describes a generalized quadratic weight selection procedure based on asymptotic modal properties of linear-quadratic regulators as control weights tend to zero. Explicit formulas are developed for weighting matrices which produce an asymptotic eigen-structure consisting of p less than or equal to n-m finite modes, with the rest tending to infinity in selectable Butterworth patterns or determined by other secondary design considerations.

Stein, G.↗
NASA NTRS1990

Numerical study of twin-jet impingement upwash flow

Two horizontally spaced jets impinging normally on a flat surface create a fountain upwash flow due to the collision of the radially flowing wall jets. This fountain flow is of importance to the dynamics and propulsion of STOVL aircraft. The fountain flow influences the lift forces on the aircraft and the ingestion of hot gases and debris by the engine inlet. In this paper, a multigrid based finite-difference numerical procedure has been applied to solve the equations governing this three-dimensional flow. The standard k-epsilon turbulence model has been used. Comparisons with experimental data reveal that while the mean velocities are predicted with reasonable accuracy, the turbulent kinetic energies are seriously in error. The reasons for this discrepancy could be the intense unsteadiness and large-scale structures of the flow in the near-wall region, which cannot be captured well by any Reynolds-averaged turbulence model.

Pegues, W. J.↗
NASA NTRS2015

A Stochastic Scheduler for Integrated Arrival, Departure and Surface Operations in Los Angeles

In terminal airspace, integrating arrivals, departures, and surface operations with competing resources provides the potential of improving operational efficiency by removing barriers between different operations. This work develops a centralized stochastic scheduler for operations in a terminal area including airborne and surface operations using Non-dominated sorting genetic algorithm and Monte Carlo simulations. The scheduler handles completing resources between different flows, such as runway allocations, runway crossing, departure fixes, and other interaction way points between arrivals and departures. Meanwhile, the scheduler also takes time-varied uncertainties into account when optimizing schedules. The scheduler is run sequentially to identify the best and robust schedule for the next planning window. Resulting schedules decide the routes, speed or delays, and runway assignments with separation constraints at mergingdiverging waypoints in the air and crossing and separations on runways. The Los Angels terminal area was used as an example. The implementation of this stochastic scheduler for integrated arrival, departure and surface operations is completed. And several preliminary runs are finished for over 1,200 flights in LAX in a typical day. Sensitivity studies on various planning window sizes are presented, which shows that trade-off exits between planning window size and achievable minimum delay. Preliminary results on runway usage are also presented in this abstract. Because arrivals on the outer runways have to be followed by crossings on the inner runways, algorithmic runway allocation prefers inner runways for arrivals and outer runways for departures. More results will be presented in the final paper. And current terminal arrival and departure procedures based on first-come-first-serve procedure will also be set up and used as a baseline for comparison.

integrated scheduler↗
NASA NTRS1994

A comparison of paper and computer procedures in a Shuttle flight environment

The Electronic Procedures Experiment (EPROC) was flown as part of the Human Factors Assessment (HFA) experiment aboard the SpaceHab-1/STS-57 mission. EPROC is concerned with future, longer-duration missions which will increasingly rely on electronic procedures since they are more easily launched, updated in-flight, and offer automatic or on-request capabilities not available with paper. A computer-based task simulating a Space Station Propulsion System task was completed by one crewmember. The crewmember performed the task once using paper and once using computer procedures. A soldering and desoldering task was performed by another crewmember. Soldering was completed with paper procedures and desoldering was completed using computer procedures. Objective data was collected during each task session from the computer programs, videotapes, and crew notations in the paper and computer procedures. After each task session, subjective data was collected through the use of a computer-based questionnaire program. Resultant recommendations will be made available to future designers of electronic procedures systems for manned-space missions and other related uses.

Michael O'Neal↗
NASA NTRS1994

Using CLIPS to represent knowledge in a VR simulation

Virtual reality (VR) is an exciting use of advanced hardware and software technologies to achieve an immersive simulation. Until recently, the majority of virtual environments were merely 'fly-throughs' in which a user could freely explore a 3-dimensional world or a visualized dataset. Now that the underlying technologies are reaching a level of maturity, programmers are seeking ways to increase the complexity and interactivity of immersive simulations. In most cases, interactivity in a virtual environment can be specified in the form 'whenever such-and-such happens to object X, it reacts in the following manner.' CLIPS and COOL provide a simple and elegant framework for representing this knowledge-base in an efficient manner that can be extended incrementally. The complexity of a detailed simulation becomes more manageable when the control flow is governed by CLIPS' rule-based inference engine as opposed to by traditional procedural mechanisms. Examples in this paper will illustrate an effective way to represent VR information in CLIPS, and to tie this knowledge base to the input and output C routines of a typical virtual environment.

Engelberg, Mark L.↗
NASA NTRS1993

Multidisciplinary aeroelastic analysis of a generic hypersonic vehicle

This paper presents details of a flutter and stability analysis of aerospace structures such as hypersonic vehicles. Both structural and aerodynamic domains are discretized by the common finite element technique. A vibration analysis is first performed by the STARS code employing a block Lanczos solution scheme. This is followed by the generation of a linear aerodynamic grid for subsequent linear flutter analysis within subsonic and supersonic regimes of the flight envelope; the doublet lattice and constant pressure techniques are employed to generate the unsteady aerodynamic forces. Flutter analysis is then performed for several representative flight points. The nonlinear flutter solution is effected by first implementing a CFD solution of the entire vehicle. Thus, a 3-D unstructured grid for the entire flow domain is generated by a moving front technique. A finite element Euler solution is then implemented employing a quasi-implicit as well as an explicit solution scheme. A novel multidisciplinary analysis is next effected that employs modal and aerodynamic data to yield aerodynamic damping characteristics. Such analyses are performed for a number of flight points to yield a large set of pertinent data that define flight flutter characteristics of the vehicle. This paper outlines the finite-element-based integrated analysis procedures in detail, which is followed by the results of numerical analyses of flight flutter simulation.

Gupta, K. K.↗
NASA NTRS1993

Estimation of spectral emissivity in the thermal infrared

A number of algorithms are available in the literature that attempt to remove most of the effects of temperature from thermal multispectral data where the final goal is to extract emissivity differences. Early approaches include adjacent spectral band ratioing, broad band radiance normalization and the use of one band where emissivities are generally high (e.g., 11 to 12 micrometers) to determine the temperature. More recent work has produced two techniques that use data averaging to extract temperature to leave a quantity related to emissivity changes. These two techniques have been investigated and compared and appear to provide reasonable results. The analysis presented in this paper develops a thermal IR multispectral temperature/emissivity estimation procedure based on formal estimation theory, Gaussian statistics, and a stochastic radiance signal model including the effects of both temperature and emissivity. The importance of this work is that this is an optimal estimation procedure which will provide minimum variance estimates of temperature and emissivity changes directly. Section 2 discusses optimal linear spectral emissivity estimation and Section 3 is a summary.

Kryskowski, David↗
NASA NTRS2001

Current Level of Mission Control Automation at NASA/Goddard Space Flight Center

NASA is particularly concerned with reducing mission operations costs through increased automation. This paper examines the operations procedures within NASA Mission Control Centers in order to uncover the level of automation that currently exists within them. Based on an assessment of mission operations procedures within three representative control centers, this paper recommends specific areas where there is potential for mission cost reduction through increased automation.

Maks, Lori↗
NASA NTRS1990

Statistically based material properties: A military handbook-17 perspective

This paper describes statistical procedures and their importance in obtaining composite material property values in designing structures for aircraft and military combat systems. The property value is such that the strength exceeds this value with a prescribed probability with 95% confidence in the assertion. The survival probabilities are the 99th percentile and 90th percentile for the A and B basis values respectively. The basis values for strain to failure measurements are defined in a similar manner. The B value is the primary concern of this paper.

Donald M. Neal↗
NASA NTRSDate not supplied

Using Recorded Airspace Traffic Data to Create Simulation Scenarios for Trajectory-Based Operations

The National Aeronautics and Space Administration is supporting research to transition from the current air traffic management paradigm to Trajectory-Based Operations targeting the 2035-2045 timeframe. Trajectory-Based Operations in the National Airspace System focuses on modernizing current operations and technology to increase efficiency, predictability, resilience, and flexibility while migrating toward greater operational autonomy across the airspace. To understand the impact of new technologies and procedures that enable Trajectory-Based Operations, simulation studies must be conducted using realistic scenarios. This paper describes techniques that can be employed when using recorded airspace traffic data to create scenarios representative of a 2040 Trajectory-Based Operations airspace. The paper provides a use case example and suggests how this methodology may be applied to other simulations studying concepts, technologies, and procedures in a future airspace system.

Billy K. Buck↗
NASA NTRS1985

Modifications of system for elevated temperature tensile testing and stress-strain measurement of metal matrix composites

Composites consisting of tungsten alloy wires in superalloy matrices are being studied because they offer the potential for increased strength compared to current materials used at temperatures up to at least 1093 C (2000F). Previous research at the NASA Lewis Research Center and at other laboratories in the U.S., Europe, and Japan has demonstrated laboratory feasibility for fiber reinforced superalloys (FRS). The data for the mechanical and physical properties used to evaluate candidate materials is limited and a need exists for a more detailed and complete data base. The focus of this work is to develop a test procedure to provide a more complete FRS data base to quantitatively evaluate the composite's potential for component applications. This paper will describe and discuss the equipment and procedures under development to obtain elevated temperature tensile stress-strain, strength and modulus data for the first generation of tungsten fiber reinforced superalloy composite (TFRS) materials. Tensile stress-strain tests are conducted using a constant crosshead speed tensile testing machine and a modified load-strain measuring apparatus. Elevated temperature tensile tests are performed using a resistance wound commercial furnace capable of heating test specimens up to 1093 C (2000 F). Tensile stress-strain data are obtained for hollow tubular stainless steel specimens serving as a prototype for future composite specimens.

Diaz, J. O.↗
NASA NTRS1994

Optimization of Wing-Body Configurations by the Euler Equations

This paper describes a new wing-body design procedure which is based on the Euler equations and a constrained numerical optimization technique. The geometry modification is based on a set of fundamental modes defined on the unit interval. A design example involving a generic wing-body model is presented to demonstrate the usefulness of the design program. It is shown that the use of an Euler solver coupled with a direct numerical optimization procedure is affordable on the current generation of supercomputers.

Chang, I.-Chung↗
NASA NTRS2011

Identifying Functional Requirements for Flexible Airspace Management Concept Using Human-In-The-Loop Simulations

Flexible Airspace Management (FAM) is a mid- term Next Generation Air Transportation System (NextGen) concept that allows dynamic changes to airspace configurations to meet the changes in the traffic demand. A series of human-in-the-loop (HITL) studies have identified procedures and decision support requirements needed to implement FAM. This paper outlines a suggested FAM procedure and associated decision support functionality based on these HITL studies. A description of both the tools used to support the HITLs and the planned NextGen technologies available in the mid-term are presented and compared. The mid-term implementation of several NextGen capabilities, specifically, upgrades to the Traffic Management Unit (TMU), the initial release of an en route automation system, the deployment of a digital data communication system, a more flexible voice communications network, and the introduction of a tool envisioned to manage and coordinate networked ground systems can support the implementation of the FAM concept. Because of the variability in the overall deployment schedule of the mid-term NextGen capabilities, the dependency of the individual NextGen capabilities are examined to determine their impact on a mid-term implementation of FAM. A cursory review of the different technologies suggests that new functionality slated for the new en route automation system is a critical enabling technology for FAM, as well as the functionality to manage and coordinate networked ground systems. Upgrades to the TMU are less critical but important nonetheless for FAM to be fully realized. Flexible voice communications network and digital data communication system could allow more flexible FAM operations but they are not as essential.

dynamic airspace configuration↗
NASA NTRS1980

Procedure M - An advanced procedure for stratified area estimation using Landsat

Procedure M is a systematic approach to processing multispectral scanner data for classification and acreage estimation. The procedure incorporates a statistically robust mechanism for estimation while utilizing component technologies that are based on the physically expected or measured responses of the canopy, atmosphere and sensor. This paper describes Procedure M in the context of large-area agricultural applications, emphasizing three specific configurations: for winter wheat, spring small grains, and corn and soybeans.

Holmes, Q. A.↗
NASA NTRS1982

Acquisition history simulation for evaluation of Landsat-based crop inventory systems

This paper describes the development and evaluation of a simulation procedure which produces patterns of Landsat data loss attributable to cloud patterns that are characteristic of a crop region. This simulation procedure is part of a simulation system under development which evaluates the performance of crop inventory system components over a number of years and under a variety of conditions.

Smith, J. H.↗