SEARCH · Search NASA

Results for “Payne effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1976

The critical currents in superconducting tin films

The nonlinear current-voltage curves exhibited by tin films in the flux flow state have made studies of the amount of heating present in the sample necessary. The samples in this work consisted of an evaporated tin film on one side of a 2 mm thick crystal quartz substrate and a carbon film of the same configuration as the tin film on the back of the substrate. The carbon film was used as a thermometer to measure the temperature rise of the tin film above the bath temperature. The heating results indicate negligible effects in the samples. Temperature ratios as small as 0.80 for the tin samples have been investigated and the current-voltage characteristics are still nonlinear, indicating that the source of the nonlinearity is not Joule heating in the samples.

Payne, J. E.↗

NASA NTRS1958

A correlation of results of flight investigation with results of an analytical study of effects of wing flexibility on wing strains due to gusts

An analytical study of the effects of wing flexibility on wing strains due to gusts has been made for four spanwise stations of a four-engine bomber airplane, and the results have been correlated with results of a previous flight investigation.

Shufflebarger, C C↗

NASA NTRS1972

The NASA-USPHS Health Evaluation and Enhancement Program

An exercise program was initiated to assess the feasibility of an on the job health evaluation and enhancement program, as well as to identify the factors which influenced volunteering, adherence, and effectiveness of the program. The program was utilized by 237 of the 998 eligible Federal employees, with a mean attendance of 1.3 days per week. Those who volunteered perceived a need for increased physical activity, felt they had sufficient time to participate, and derived subjective as well as objective benefits. Significant improvements were found in heart rate response to the standard exercise test, body weight, skinfold measurements, and triglycerides. A consistent relationship was found between subjectively reported effects of the program on work, health habits, and behavior, and improvement in cardiovascular function, based on treadmill performance. Numerous personal and programmatic factors influencing volunteering and participation were identified.

Durbeck, D. C.↗

NASA NTRS1972

Research and development of silicon solar cells for low solar intensity and low temperature applications

Problems were identified, using N/P solar cells at low temperature and low intensity; these problems were solved and the solutions incorporated in a manufacturing procedure. Theoretical analysis of the effects of low temperature and low intensity on the various solar cell characteristics indicated that the following behavior might be expected: (1) lower short circuit current,(2) higher open circuit voltage,(3) series resistance becoming less significant, and (4) shunt resistance becoming more critical.

Payne, P. A.↗

NASA NTRS2023

Solid-State Thermodynamic Vent System for Control of Cryogenic Propellants

A Solid-State Thermodynamic Vent System (STVS) is a novel Cryogenic Fluid Management (CFM) technology for spacecraft cryogenic propellant tanks that may reduce boiloff while providing greater control over the propellent condition. By exploiting the vacuum-induced cryocooling potential of cryogen-saturated silica aerogel material, an internal STVS heat exchanger expels some sacrificial cryogenic propellant to the vacuum of space to produce cooling within the storage tank. This cooling is transferred directly to the stored fluid, thereby reducing boiloff and increasing hold times. The primary STVS project objective was to design and build a bespoke STVS heat exchanger that employed aerogel blanket material and perform a ground demonstration of the technology using liquid nitrogen (LN2) as the cryogenic propellant. This demonstration aimed to prove that an STVS can have a positive influence on the tank boiloff, shown through a reduction in mass flow rate out of the system during operation, and exercise control over the tank pressure. Testing proved the effectiveness of the concept by reducing the LN2 boiloff rate and tank pressure by roughly 70% and 77% respectively during a single pump-down cycle, which sacrificed around 1.8 kg of propellant.

Propellant Production↗

NASA NTRS2024

Solid-State Thermodynamic Vent System (STVS) for Control of Cryogenic Propellants

Cryogenic Fluid↗

NASA NTRS1976

Analytical trade study of the STS payload environment

The current predicted acoustic environment for the shuttle orbiter payload bay will produce random vibration environments for payload components and subsystems which potentially will result in design, weight and cost penalties if means of protecting the payloads are not developed. Results are presented of a study to develop, through design and cost effectiveness trade studies, conceptual noise suppression device designs for space shuttle payloads. The impact of noise suppression on environmental levels and associated test costs, and on test philosophy for the various payload classes is considered with the ultimate goal of reducing payload test costs. Conclusions and recommendations are presented.

Rader, W. P.↗

NASA NTRS1989

Laboratory and theoretical studies of baroclinic processes

An understanding is being developed for processes which may be important in the atmosphere, and the definition and analysis of baroclinic experiments utilizing the geophysical fluid flow cells (GFFC) apparatus in microgravity space flights. Included are studies using numerical codes, theoretical models, and terrestrial laboratory experiments. The numerical modeling is performed in three stages: calculation of steady axisymmetric flow, calculation of fastest-growing linear eigenmodes, and nonlinear effects (first, wave-mean flow interactions, then wave-wave interactions). The code can accommodate cylindrical, spherical, or channel geometry. It uses finite differences in the vertical and meridional directions, and is spectral in the azimuthal. The theoretical work was mostly in the area of effects of topography upon the baroclinic instability problem. The laboratory experiments are performed in a cylindrical annulus which has a temperture gradient imposed upon the lower surface and an approximately isothermal outer wall, with the upper and inner surfaces being nominally thermally insulating.

Miller, Timothy↗

NASA NTRS2023

Survival of Juvenile Florida Scrub-Jays is Habitat Specific, Positively Correlated With Month and Negatively Correlated With Male Breeder Death

Juvenile survival in birds is difficult to estimate but this vital rate can be an important consideration for management decisions. We estimated juvenile survival of cooperatively breeding Florida Scrub-Jays (Aphelocoma coerulescens) in a landscape degraded by fire suppression and fragmentation using data from marked (n = 325) and unmarked juveniles (n = 1,306) with an integrated hierarchical Bayesian model. To assess the combined analyses, we also analyzed these datasets separately, with a Cormack-Jolly-Seber (CJS) model (marked) and young model (unmarked). Our data consisted of monthly censuses of territorial family groups from Florida Scrub-Jay populations in East Central Florida collected over a 22-yr period. Juvenile survival was estimated from July when young Florida Scrub-Jays begin developing independence to March when they become first year individuals and grouped according to the habitat quality class of their natal territory that were based on shrub height (with intermediate shrub heights being optimal and short and tall shrub heights being suboptimal) and the presence of sandy openings (the preferred open having many sandy openings; closed not having enough). Parameter estimates in the combined analysis were intermediate to the separate analyses. Notable differences among the separate analyses were that suboptimal habitat survival was lower in the unmarked analysis, the unmarked analysis showed a linear effect of time not seen in the marked analysis, and there was an effect of male breeder death in the marked but not unmarked analysis. The combined data analysis provided more inference than did either data set analyzed separately including juveniles in optimal-closed territories unexpectedly had higher survival than those in optimal-open, survival increased through time, and male breeder death had a negative effect on survival. This study suggests that optimal-closed habitat may play an important role in juvenile Florida Scrub-Jay survival perhaps by providing better cover from predators and warrants further investigation for management implications.

Florida Scrub-Jay↗

NASA NTRS2021

An Encounter with the Ion and Electron Diffusion Regions at a Flapping and Twisted Tail Current Sheet

We analyze data returned by the Magnetospheric Multiscale mission (MMS) constellation during a rapid (~1.5 s) traversal of a flapping and reconnecting current sheet (CS) in the near-Earth magnetotail (X ~ -20 RE). The CS was highly tilted, with its normal pointing strongly duskward. Its extreme thinness was confirmed by a curvature analysis of the magnetic field lines. The event was associated with a guide field of 8% of the reconnecting components. From the pitch angle distributions of low-energy electrons we infer that the crossing occurred earthward of the X-line. Traveling practically normal to the CS, MMS encountered an ion diffusion region (IDR) in which was embedded an electron diffusion region (EDR). IDR signatures included breaking of the ion frozen-in condition in the presence of Hall B and E fields. EDR signatures included a strong out of-plane current associated with a super-Alfvenic electron jet, evidence of positive energy transfer, and a temperature anisotropy (TeII > Te1) which disappeared at the field reversal. Derived scale sizes normal to the CS are: ~6.9 de (EDR) and ~0.4 di (IDR) (40 and 100 km). We estimate the average dimensionless reconnection rate as 0.077 + 0.050. The observations and inferences are supported by PIC numerical simulations. We find very good agreement in the reconnection rates. We also discuss the effects of asymmetries in the density, temperature and magnetic field strength on the Hall fields and length of the outflow jets. The event is associated with a substorm onset which began 7 min after the MMS observations.

C J Farrugia↗

NASA NTRS1980

Pressure dependence of the absolute rate constant for the reaction OH + C2H2 from 228 to 413 K

The pressure dependence of the absolute rate constant for the reaction of the hydroxyl radical with acetylene, important in both atmospheric and combustion chemistry, is determined for temperatures between 228 and 413 K. The flash photolysis-resonance fluorescence technique was employed at five temperatures over wide ranges of pressure and acetylene concentrations, with the OH produced by water photolysis and hydroxyl resonance fluorescent photons measured by multiscaling techniques. Results indicate that, except at the lowest temperature, the bimolecular rate constant for the reaction depends strongly on total pressure, with the pressure effect becoming more pronounced with increasing temperature. At limiting high pressures, the rate constant is found to be equal to 6.83 + or - 1.19 x 10 to the -12th exp (-646 + or - 47/T) cu cm/molecule per sec, where T is the temperature. Results thus demonstrate the importance of environmental conditions in theoretical studies of atmospheric and combustion product compositions

Michael, J. V.↗

NASA NTRS1984

Solitons versus parametric instabilities during ionospheric heating

Various effects associated with ionospheric heating are investigated by numerically solving the modified Zakharov (1972) equations. It is shown that, for typical ionospheric parameters, the modulational instability is more important than the parametric decay instability in the spatial region of strongest heater electric field. It is concluded that the modulational instability leads to the formation of solitons, as originally predicted by Petviashvili (1976).

Nicholson, D. R.↗

NASA NTRS1971

Development of lithium diffused radiation resistant solar cells, part 2

The work performed to investigate the effect of various process parameters on the performance of lithium doped P/N solar cells is described. Effort was concentrated in four main areas: (1) the starting material, (2) the boron diffusion, (3) the lithium diffusion, and (4) the contact system. Investigation of starting material primarily involved comparison of crucible grown silicon (high oxygen content) and Lopex silicon (low oxygen content). In addition, the effect of varying growing parameters of crucible grown silicon on lithium cell output was also examined. The objective of the boron diffusion studies was to obtain a diffusion process which produced high efficiency cells with minimal silicon stressing and could be scaled up to process 100 or more cells per diffusion. Contact studies included investigating sintering of the TiAg contacts and evaluation of the contact integrity.

Payne, P. R.↗

NASA NTRS1990

Particle simulation of Langmuir turbulence during ionospheric heating

Ionospheric heating leads to strong Langmuir turbulence including modulational instability, soliton formation, and spatial collapse. The Zakharov model usually used to describe these effects contains a low-frequency ion-acoustic wave equation which cannot be rigorously justified in the ionosphere where the electron and ion temperatures are comparable. In the present work, the low-frequency physics is described by a many-ion computer simulation. While some differences are found, the results for the most part confirm the earlier, much less difficult, Zakharov calculations.

Clark, K. L.↗

NASA NTRS1972

Development and pilot line production of lithium doped silicon solar cells

The work performed over the period of September 1971 to August 1972 to develop production processes for fabrication of lithium doped P/N cells is described. The BCl3 diffusion without 02 was selected as the optimum diffusion process for fabrication of lithium doped cells. An 8-2-7 (warm up - deposition - drive-in time in minutes) diffusion schedule at 1055 C was used for the first two lots (300 cells each) delivered to JPL. Cell efficiencies ranged from 11.0 to 13.7% based on an AMO of 135.3 mW/sq cm. These high efficiencies were obtained using from 10 to 40 cells per boron diffusion; increasing the quantity beyond 40 resulted in lower outputs. At this point, the emphasis was placed on investigation of a BCl3 with 02 diffusion. Through evaluation of the effects of diffusion time and temperature, gas flow rates, and desposition plus drive-in vs. continuous deposition and no drive-in cycles, diffusion parameters were determined which produced short circuit currents of 136 + or - 4 mA for ten cells spaced along 12 in. of the diffusion boat. The quantity was increased to 60, 100, and 150 cell diffusions with no more variation in cell short circuit current than observed with 10 cells.

Payne, P. A.↗

NASA NTRS1981

Effects of noise frequency on performance and annoyance for women and men

Effects of noise frequencies on both performance on a complex psychomotor task and annoyance were investigated for men (n = 30) and women (n = 30). Each subject performed a complex psychomotor task for 50 min in the presence of low-frequency noise, high-frequency noise, or ambient noise. Women and men learned the task at different rates. Little effect of noise was shown. Annoyance ratings were subsequently obtained from each subject for noises of various frequencies by the method of magnitude estimation. High-frequency noises were more annoying than low-frequency noises regardless of sex and immediate prior exposure to noise. Sex differences in annoyance did not occur. No direct relationship between learning to perform a complex task while exposed to noise and annoyance by that noise was demonstrated.

Key, K. F.↗

NASA NTRS1972

The National Aeronautics and Space Administration-U.S. Public Health Service Health Evaluation and Enhancement Program - Summary of results.

An exercise program was initiated in a federal agency to assess the feasibility of such a program, and to identify the factors that influenced joining, adherence to, and effectiveness of the program. The program was utilized by 237 of the 998 eligible federal employees; mean attendance rate was 1.3 days/week. Those who volunteered perceived a need for increased physical activity, believed they had sufficient time to participate and derived subjective as well as objective benefits. Significant improvements were found in heart rate response to the standard exercise test, body weight, skinfold measurements and triglyceride levels.

Durbeck, D. C.↗

NASA NTRSDate not supplied

Analysis of Supercooled Large Drop Velocity Measurement in the NASA Icing Research Tunnel

An experiment was conducted in the Icing Research Tunnel (IRT) at the NASA Glenn Research Center to measure the velocity of supercooled large drops (SLD) in the test section of the tunnel. Previous experiments in the IRT suggested that supercooled large drops passing through the test section of the tunnel do not move at the same velocity as the surrounding air flow. The difference between drop velocity and tunnel air velocity is called slip velocity. The slip velocity is important for determining the exact nature of SLD icing simulation in the IRT. It can impact the ice growth process because of its effect on drop cooling rate during transit from the spray bars to the test section. It can also affect the amount of splashing that occurs upon impact. Slip velocity is an important flow parameter to determine how far the current facility capabilities can be extended into the SLD regime. Initial measurement data analysis of the drop velocities indicates that drops with diameter larger than about 100 to 200 µm experience velocity slip.

SLD↗