Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pd single atoms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Variations of Alloying Site Density in Pd 1 Cu Single‐Atom Alloy Catalysts Lead to Shifted Product Yields in Electrochemical CO Reduction

Single-atom alloy (SAA) catalysis research often reports that a SAA catalyst, in the general formulation of a single-atom metal M1 alloyed on the surface of the host metal M2, facilitates a probe reaction. However, for catalytic reactions that present decoupled rate- and selectivity-limiting steps, the alloying site density may significantly manipulate these independent steps, but it has rarely been explicitly examined for any SAA systems. Herein, using the electrocatalytic CO reduction as a probe reaction, we report that the nominal Pd 1 Cu cube SAA catalysts exhibit distinctive high reactivity toward ethylene or ethanol, respectively, depending on whether the Pd atoms are in dilute or crowded forms. Although the presence of single-atom Pd embedded on Cu uniformly promotes CHO* formation and C─C coupling, the dilute-Pd 1 Cu favors ethylene formation by enabling low-barrier C─O cleavage from a flat CH 2 CH 2 OH* intermediate, whereas the crowded-Pd 1 Cu promotes ethanol formation by stabilizing an upright hydrogenation transition state of the same intermediate. Furthermore, we present evidence that the catalytic chemistry of crowded Pd 1 species differs from that of the Pd 2 -dimer; the latter, albeit unstable, steers reaction selectivity to acetate instead. In conclusion, these results uncovered the underappreciated importance of controlling SAA catalytic chemistry from the perspective of single-atom site densities.

Jin, Zehua [Clemson University, SC (United States)↗
DOE OSTI2022

Metal–Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal–Support Bonding, Ordered Intermetallics, and Single Atoms

In-depth investigation of metal–metal oxide interactions and their corresponding evolution is of paramount importance to heterogeneous catalysis as it allows the understanding and maneuvering of the structure of catalytic motifs. Herein, using a series of core/shell metal/iron oxide (M/FeO x , M = Pd, Pt, Au) nanoparticles and through a combination of in situ and ex situ electron and X-ray investigations, we revealed anomalous and dissimilar M–FeO x interactions among different systems under reducing conditions. Further, Pd interacts strongly with FeO x after high-temperature reductive treatment, featured by the formation of Pd single atoms in the FeO x matrix and increased Pd–Fe bonding, while Pt transforms into ordered PtFe intermetallics and Pt single atoms immediately upon the coating of FeO x . In contrast, Au does not manifest strong bonding with FeO x . As a proof of concept of tailoring metal–metal oxide interactions for catalysis, optimized Pd/FeO x demonstrates 100% conversion and 86.5% selectivity at 60 °C for acetylene semihydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Amorphous Pd-Loaded Ti 4 O 7 Electrode for Direct Anodic Destruction of Perfluorooctanoic Acid

In this work we present a novel Ti 4 O 7 -based electrode loaded with amorphous Pd clusters that achieve efficient anodic destruction of perfluorooctanoic acid (PFOA), a persistent water pollutant with significant environmental and human health concerns. These amorphous Pd clusters were characterized by the disordered, noncrystalline arrangement of Pd single atoms in close proximity, in contrast to crystalline Pd nanoparticles that have been often employed to tailor the electronic properties of an electrode. We found that the Ti 4 O 7 electrode loaded with amorphous Pd clusters significantly outperformed the Ti 4 O 7 electrode loaded with crystalline Pd particles due to enhanced electron transfer through dominant Pd–O bonds. Combined with the efficient binding of PFOA and its degradation intermediates to the fluorinated electrode surface, this electrode was capable of mineralizing PFOA and releasing fluoride as F – . The reaction pathway was found to proceed without involving reactive oxygen species and therefore was not quenched by common anions in complex natural water systems such as chloride ions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Surface Density Dependent Catalytic Activity of Single Palladium Atoms Supported on Ceria

The analogy between single-atom catalysts (SACs) and molecular catalysts predicts that the specific catalytic activity of these systems is constant. Here we provide evidence that this prediction is not necessarily true. As a case in point, we show that the specific activity over ceria-supported single Pd atoms linearly increases with metal atom density, originating from the cumulative enhancement of CeO 2 reducibility. The long-range electrostatic footprints (≈1.5 nm) around each Pd site overlap with each other as surface Pd density increases, resulting in an observed deviation from constant specific activity. These cooperative effects exhaust previously active O atoms above a certain Pd density, leading to their permanent removal and a consequent drop in reaction rate. The findings of our combined experimental and computational study show that the specific catalytic activity of reducible oxide-supported single-atom catalysts can be tuned by varying the surface density of single metal atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water–Gas Shift Activity

Research interest in single-atom catalysts (SACs) has been continuously rising. However, the lack of understanding of the dynamic behaviors of SACs during applications hinder catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO 2 -anatase SAC (Pd 1 /TiO 2 ) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in-situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO 2 by H 2 alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H 2 is accompanied by the partial sintering of single Pd atoms (Pd 1 ) into disordered, flat, ~1 nm diameter clusters (Pd n ). The highly active Pd sites in the new coordination environment under H 2 are eliminated by oxidation, which, when performed at high temperature, also re-disperses Pd n and facilitates the reduction of TiO 2 . In contrast, Pd 1 sinters into crystalline, ~5 nm particles (Pd NP ) during CO treatment, deactivating Pd 1 /TiO 2 . During the rWGS reaction, the two Pd evolution pathways co-exist. The activation by H 2 dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar with the ones formed under H 2 . Finally, this work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pre-treatments, and how their activity is modulated by these behaviors. These insights on SAC dynamics and structure-function relationship are valuable to mechanistic understanding and catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Superatoms as Superior Catalysts: ZrO versus Pd

Abstract Single‐atom catalysts are the focus of studies for over a decade due to their enhanced reactivity at smaller sizes. However, they have limitations as they offer only one active site, which may not be sufficient for reactions requiring the co‐adsorption of multiple reactants. Additionally, atoms can migrate on a substrate and coalesce, resulting in decreased reactivity. Here, an alternate path, a single‐superatom catalyst is provided. Superatoms are clusters of atoms that mimic the chemistry of atoms even if they do not contain a single atom whose chemistry they mimic. Motivated by an experimental paper on the photoelectron‐spectroscopy of negatively charged ions where ZrO is found to mimic properties of a Pd atom, first the reaction of Pd and ZrO with small molecules in the gas‐phase is studied and found that ZrO not only mimics the chemistry of Pd, but is able to activate these molecules more strongly than Pd. A detailed first‐principles study of CO 2 reduction (CO 2 ‐RR) and hydrogen evolution reactions (HER) on Pd and ZrO supported on graphene, Au(111), and Cu(111) surfaces shows that superatoms are indeed superior catalysts. The ability to design numerous superatoms by varying size and composition offers a promising new paradigm for catalyst design and synthesis.

Chemistry↗
DOE OSTI2020

Materials Data on Pd(XeF8)2 by Materials Project

Pd(XeF8)2 crystallizes in the orthorhombic Pca2_1 space group. The structure is zero-dimensional and consists of four Pd(XeF8)2 clusters. there are two inequivalent Xe sites. In the first Xe site, Xe is bonded in a 5-coordinate geometry to six F atoms. There are a spread of Xe–F bond distances ranging from 1.99–2.45 Å. In the second Xe site, Xe is bonded in a 5-coordinate geometry to six F atoms. There are a spread of Xe–F bond distances ranging from 1.99–2.47 Å. Pd is bonded in an octahedral geometry to six F atoms. There are a spread of Pd–F bond distances ranging from 1.94–1.97 Å. There are sixteen inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Pd atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom. In the fifth F site, F is bonded in a single-bond geometry to one Xe atom. In the sixth F site, F is bonded in a single-bond geometry to one Xe atom. In the seventh F site, F is bonded in a single-bond geometry to one Xe atom. In the eighth F site, F is bonded in a distorted single-bond geometry to one Pd atom. In the ninth F site, F is bonded in a single-bond geometry to one Xe atom. In the tenth F site, F is bonded in a single-bond geometry to one Pd atom. In the eleventh F site, F is bonded in a single-bond geometry to one Pd atom. In the twelfth F site, F is bonded in a single-bond geometry to one Xe atom. In the thirteenth F site, F is bonded in a distorted bent 150 degrees geometry to one Xe and one Pd atom. In the fourteenth F site, F is bonded in a single-bond geometry to one Xe atom. In the fifteenth F site, F is bonded in a distorted bent 150 degrees geometry to one Xe and one Pd atom. In the sixteenth F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing the atomically diffuse interfaces in Pd@Pt core-shell nanoparticles in three dimensions

Deciphering the three-dimensional atomic structure of solid-solid interfaces in core-shell nanomaterials is the key to understand their catalytical, optical and electronic properties. Here, we probe the three-dimensional atomic structures of palladium-platinum core-shell nanoparticles at the single-atom level using atomic resolution electron tomography. We quantify the rich structural variety of core-shell nanoparticles with heteroepitaxy in 3D at atomic resolution. Instead of forming an atomically-sharp boundary, the core-shell interface is found to be atomically diffuse with an average thickness of 4.2 Å, irrespective of the particle’s morphology or crystallographic texture. The high concentration of Pd in the diffusive interface is highly related to the free Pd atoms dissolved from the Pd seeds, which is confirmed by atomic images of Pd and Pt single atoms and sub-nanometer clusters using cryogenic electron microscopy. These results advance our understanding of core-shell structures at the fundamental level, providing potential strategies into precise nanomaterial manipulation and chemical property regulation.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Dynamic and reversible transformations of subnanometre-sized palladium on ceria for efficient methane removal

Reversibly adjusting the active structures of supported metal catalysts in response to dynamic working conditions has long been pursued. Here we report the reaction-environment-modulated transformations of subnanometre-sized Pd on CeO 2 for efficient methane removal, leveraging the reaction environments at different stages of automotive exhaust aftertreatment. During the cold start of vehicles, inactive Pd 1 single atoms are readily transformed into PdO $x$ subnanometre clusters by CO even at room temperature with excess O 2 , resulting in boosted low-temperature CH 4 oxidation. At elevated temperatures, dispersion of PdO $x$ cluster into Pd 1 against metal sintering renders outstanding hydrothermal stability to the catalyst, to be activated during the next vehicle start. Combined experimental and computational studies elucidate the dynamically evolved Pd speciation on CeO 2 at an atomic level. In conclusion, modulating the reversible nature of supported metals helps overcome the long-existing trade-off between low-temperature activity and high-temperature stability, also providing a new paradigm for designing intelligent catalysts that brings single-atom/cluster catalysts closer to real applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Zero-Valent Palladium Single-Atoms Catalysts Confined in Black Phosphorus for Efficient Semi-Hydrogenation

Single-atom catalysts (SACs) represent a new frontier in heterogeneous catalysis due to their remarkable catalytic properties and maximized atomic utilization. However, single atoms often bond to the support with polarized electron density and thus exhibit a high valence state, limiting their catalytic scopes in many chemical transformations. In this study, it is demonstrated that 2D black phosphorus (BP) acts as giant phosphorus (P) ligand to confine a high density of single atoms (e.g., Pd 1 , Pt 1 ) via atomic layer deposition. Unlike other 2D materials, BP with relatively low electronegativity and buckled structure favors the strong confinement of robust zero-valent palladium SACs in the vacancy site. Metallic Pd 1 /BP SAC shows a highly selective semi-hydrogenation of phenylacetylene toward styrene, distinct from metallic Pd nanoparticles that facilitate the formation of fully hydrogenated products. Density functional theory calculations reveal that Pd atom forms covalent-like bonding with adjacent P atoms, wherein H atoms tend to adsorb, aiding the dissociative adsorption of H 2 . Zero-valent Pd in the confined space favors a larger energy gain for the synthesis of partially hydrogenated product over the fully hydrogenated one. This work provides a new route toward the synthesis of zero-valent SACs on BP for organic transformations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modifying the Reactivity of Single Pd Sites in a Trimetallic Sn‐Pd‐Ag Surface Alloy: Tuning CO Binding Strength

Abstract Improving control over active‐site reactivity is a grand challenge in catalysis. Single‐atom alloys (SAAs) consisting of a reactive component doped as single atoms into a more inert host metal feature localized and well‐defined active sites, but fine tuning their properties is challenging. Here, a framework is developed for tuning single‐atom site reactivity by alloying in an additional inert metal, which this work terms an alloy‐host SAA. Specifically, this work creates about 5% Pd single‐atom sites in a Pd 33 Ag 67 (111) single crystal surface, and then identifies Sn based on computational screening as a suitable third metal to introduce. Subsequent experimental studies show that introducing Sn indeed modifies the electronic structure and chemical reactivity (measured by CO desorption energies) of the Pd sites. The modifications to both the electronic structure and the CO adsorption energies are in close agreement with the calculations. These results indicate that the use of an alloy host environment to modify the reactivity of single‐atom sites can allow fine‐tuning of catalytic performance and boost resistance against strong‐binding adsorbates such as CO.

Mohrhusen, Lars↗
DOE OSTI2020

Materials Data on Pd5(N9Cl5)2 by Materials Project

Pd3(N5Cl)2(Pd(NCl)4)2 crystallizes in the tetragonal P4_2/nmc space group. The structure is two-dimensional and consists of four Pd(NCl)4 clusters and two Pd3(N5Cl)2 sheets oriented in the (0, 0, 1) direction. In each Pd(NCl)4 cluster, Pd+3.20+ is bonded in a distorted trigonal pyramidal geometry to four N+0.33- atoms. There are two shorter (1.90 Å) and two longer (2.13 Å) Pd–N bond lengths. There are two inequivalent N+0.33- sites. In the first N+0.33- site, N+0.33- is bonded in a single-bond geometry to one Pd+3.20+ atom. In the second N+0.33- site, N+0.33- is bonded in a distorted trigonal non-coplanar geometry to one Pd+3.20+ and two equivalent Cl1- atoms. Both N–Cl bond lengths are 1.75 Å. Cl1- is bonded in a single-bond geometry to one N+0.33- atom. In each Pd3(N5Cl)2 sheet, there are two inequivalent Pd+3.20+ sites. In the first Pd+3.20+ site, Pd+3.20+ is bonded in a distorted square co-planar geometry to four equivalent N+0.33- atoms. All Pd–N bond lengths are 1.96 Å. In the second Pd+3.20+ site, Pd+3.20+ is bonded in a distorted octahedral geometry to five N+0.33- and one Cl1- atom. There are a spread of Pd–N bond distances ranging from 1.84–2.08 Å. The Pd–Cl bond length is 2.52 Å. There are three inequivalent N+0.33- sites. In the first N+0.33- site, N+0.33- is bonded in a single-bond geometry to one Pd+3.20+ atom. In the second N+0.33- site, N+0.33- is bonded in a linear geometry to two Pd+3.20+ atoms. In the third N+0.33- site, N+0.33- is bonded in a single-bond geometry to one Pd+3.20+ atom. Cl1- is bonded in a 1-coordinate geometry to one Pd+3.20+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Single atoms and small clusters of atoms may accompany Au and Pd dendrimer-encapsulated nanoparticles

Here we report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1–2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (–NH 2 or –OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Materials Data on BPd6 by Materials Project

Pd6B is gamma plutonium structured and crystallizes in the monoclinic C2/c space group. The structure is zero-dimensional and consists of four Pd6B clusters. there are three inequivalent Pd sites. In the first Pd site, Pd is bonded in a single-bond geometry to one B atom. The Pd–B bond length is 2.08 Å. In the second Pd site, Pd is bonded in a single-bond geometry to one B atom. The Pd–B bond length is 2.08 Å. In the third Pd site, Pd is bonded in a single-bond geometry to one B atom. The Pd–B bond length is 2.07 Å. B is bonded in an octahedral geometry to six Pd atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on PPd6 by Materials Project

Pd6P crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four Pd6P clusters. there are six inequivalent Pd sites. In the first Pd site, Pd is bonded in a distorted single-bond geometry to one P atom. The Pd–P bond length is 2.29 Å. In the second Pd site, Pd is bonded in a 1-coordinate geometry to one P atom. The Pd–P bond length is 2.28 Å. In the third Pd site, Pd is bonded in a 1-coordinate geometry to one P atom. The Pd–P bond length is 2.30 Å. In the fourth Pd site, Pd is bonded in a distorted single-bond geometry to one P atom. The Pd–P bond length is 2.29 Å. In the fifth Pd site, Pd is bonded in a distorted single-bond geometry to one P atom. The Pd–P bond length is 2.28 Å. In the sixth Pd site, Pd is bonded in a 1-coordinate geometry to one P atom. The Pd–P bond length is 2.30 Å. P is bonded in a 6-coordinate geometry to six Pd atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Directing reaction pathways via in situ control of active site geometries in PdAu single-atom alloy catalysts

Abstract The atomic scale structure of the active sites in heterogeneous catalysts is central to their reactivity and selectivity. Therefore, understanding active site stability and evolution under different reaction conditions is key to the design of efficient and robust catalysts. Herein we describe theoretical calculations which predict that carbon monoxide can be used to stabilize different active site geometries in bimetallic alloys and then demonstrate experimentally that the same PdAu bimetallic catalyst can be transitioned between a single-atom alloy and a Pd cluster phase. Each state of the catalyst exhibits distinct selectivity for the dehydrogenation of ethanol reaction with the single-atom alloy phase exhibiting high selectivity to acetaldehyde and hydrogen versus a range of products from Pd clusters. First-principles based Monte Carlo calculations explain the origin of this active site ensemble size tuning effect, and this work serves as a demonstration of what should be a general phenomenon that enables in situ control over catalyst selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗