Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2c”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Utah FORGE: GPS Data - Deformation Monitoring

This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes pre-processing, pre-stack time migration, and pre-stack depth migration. It also contains a readme.text file goes into further explanation.

15 GEOTHERMAL ENERGY↗

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy’s (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in a controlled environment. In 2018, the U.S. DOE selected a site in south-central Utah for the FORGE laboratory. Numerous geoscientific studies have been conducted in the region since the 1970s in support of geothermal development at Roosevelt Hot Springs. A vertical scientific well, 58-32, was drilled and tested to a depth of 2290 m (7515 ft) GL in 2017 on the FORGE site to provide additional characterization of the reservoir rocks. The well encountered a conductive thermal regime and a bottom hole temperature of 199degC (390degF). More than 2000 natural fractures were identified, but measured permeabilities are low, less than 30 micro-darcies. Induced fractures indicate that the maximum horizontal stress trends NNE-SSW, consistent with geologic and well observations from the surrounding area. Approximately 45 m (147 ft) at the base of the well was left uncased. A maximum wellhead pressure of 27.6 MPa (4000 psig) at an injection rate of ~1431 L/min (~9 bpm) was measured during stimulation testing in September 2017. Conventional diagnostic evaluations of the data suggest that hydraulic fracturing and shearing occurred. Estimates of the stress gradient for delta_h_min range from of 16.7 to 17.6 kPa/m (0.74 to 0.78 psi/ft). A gradient of 25.6 kPa/m (1.13psi/ft) was calculated for delta_V. In 2019, the 2017 open-hole stimulation in well 58-32 was repeated with injection rates up to 2385 L/min (15 bpm). Two additional stimulations were conducted in the cased portion of the well; one to stimulate critically stressed fractures and the second to test noncritically stressed fractures. Breakdown of the zone spanning critically-stressed fractures occurred at a surface pressure of approximately 29.0 MPa (4200 psig). Although stimulation of the noncritically stressed fractures was interrupted by failure of the bridge plug beneath the perforated interval, micro-seismic data suggests stimulation of the fractures may have been initiated at a surface pressure of 45.5 MPa (6600 psig). These stimulation results support the conclusion the Mineral Mountains granitoid is an appropriate host for EGS development. Micro-seismicity was monitored during the stimulations using surface and downhole instrumentation. Five seismometers and a nodal array of 150 seismic sensors were deployed on the surface. A Distributed Acoustic Sensing (DAS) cable and a string of 12 geophones were deployed in well 78-32, drilled to a depth of 998 m (3274 ft) GL. A broadband sensor and a high-temperature geophone were deployed in well 68-32, drilled to a depth of 303 m (994 ft) GL. More than 420 micro-seismic events were detected by the geophone string. Other instruments detected fewer events.

15 GEOTHERMAL ENERGY↗

A Possible Radiation-Induced Transition from Monazite-(Ce) to Xenotime-(Y)

This study examines two pegmatitic monazite samples (2a and 4b, these numbers are related to a previous study) to determine their crystal chemistry and effects of internal radiation damage using synchrotron high-resolution powder X-ray diffraction and electron-probe micro-analysis. Both the huttonite and cheralite substitutions are discussed. Rietveld structure refinement of sample 2a shows three different phases [2a = monazite-(Ce), 2b = monazite-(Ce), and 2c = xenotime-(Y)] with distinct structural parameters. The changes among the unit-cell parameters between the two monazite-(Ce) phases is more pronounced in the a followed by the b and c unit-cell parameters. Sample 4a is a single-phase monazite-(Sm) that contains 0.164 apfu Th. Phase 2c with space group I41/amd arises from redistribution of La, Ce, Pr, Nd, Sm, Gd, Dy, Si, and Y atoms from those in monazite (space group P21/n). A possible cause for the phase transition from monazite-(Ce) to xenotime-(Y) is α-radiation events over a long geological time. However, other chemical processes cannot be ruled out as a cause for the transition.

structural variations↗

Frontier Observatory for Research in Geothermal Energy: Phase 1 Topical Report Fallon, NV

The Department of Energy (DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is to be a dedicated site where the subsurface scientific and engineering community can develop, test, and improve technologies and techniques for the creation of cost-effective and sustainable enhanced geothermal systems (EGS) in a controlled, ideal environment. The establishment of FORGE will facilitate development of an understanding of the key mechanisms controlling a successful EGS. Execution of FORGE is occurring in three phases with five distinct sub-phases (1, 2A, 2B, 2C, and 3). This report focuses on Phase 1 activities. During Phase 1, critical technical and logistical tasks necessary to demonstrate the viability of the Fallon FORGE Project site were completed and the commitment and capability of the Fallon FORGE team to execute FORGE was demonstrated. As part of Phase 1, the Fallon FORGE Team provided an assessment of available relevant data and integrated these geologic and geophysical data to develop a conceptual 3-D geologic model of the proposed test location. Additionally, the team prepared relevant operational plans for full FORGE implementation, provided relevant site data to the science and engineering community, engaged in outreach and communications with interested stakeholders, and performed a review of the environmental and permitting activities needed to allow FORGE to progress through Phase 3. The results of these activities are provided as Appendices to this report. The Fallon FORGE Team is diverse, with deep roots in geothermal science and engineering. The institutions and key personnel that comprise the Fallon FORGE Team provide a breadth of geoscience and geoengineering capabilities, a strong and productive history in geothermal research and applications, and the capability and experience to manage projects with the complexity anticipated for FORGE. Fallon FORGE Team members include the U.S. Navy, Ormat Nevada Inc., Sandia National Laboratories (SNL), Lawrence Berkeley National Laboratory (LBNL), the United States Geological Survey (USGS), the University of Nevada, Reno (UNR), GeothermEx/Schlumberger (GeothelinEx), and Itasca Consulting Group (Itasca). The site owners (through direct land ownership or via applicable permits)—the U.S. Navy and Ormat Nevada Inc.—are deeply committed to expanding the development of geothermal resources and are fully supportive of FORGE operations taking place on their lands.

15 GEOTHERMAL ENERGY↗

Frontier Observatory for Research in Geothermal Energy: Phase 1 Topical Report West Flank of Coso, CA

The Department of Energy (DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is to be a dedicated site where the subsurface scientific and engineering community can develop, test, and improve technologies and techniques for the creation of cost-effective and sustainable enhanced geothermal systems (EGS) in a controlled, ideal environment. The establishment of FORGE will facilitate development of an understanding of the key mechanisms controlling a successful EGS. Execution of FORGE is occurring in three phases with five distinct sub-phases (1, 2A, 2B, 2C, and 3). This report focuses on Phase 1 activities.

15 GEOTHERMAL ENERGY↗

Investigation of Point-Contact Strategies for CFD Simulations of Pebble-Bed Reactor Cores

This study numerically investigated the effects of various contact strategies on the thermal hydraulic behavior within a structured bed of 100 explicitly modeled pebbles. Four contact strategies and two thermal hydraulic conditions were considered. The strategies to avoid contact singularities include decreasing the pebble diameter, increasing the pebble diameter, bridging the pebble surfaces near the contact region, and capping the pebble surfaces near the contact region. One strategy, Strategy 3a, which involves bridging with a cylinder equal to 10% of the pebble diameter, was selected as the baseline strategy because it addressed the contact singularity while minimizing the geometric changes that affect the bed porosity. The two thermal hydraulic conditions were full-power operation (Case 1) and pressurized loss of forced cooling or PLOFC (Case 2). Simulations of the conjugate heat transfer within the structured bed were performed using the Reynolds-averaged Navier–Stokes approach with the realizable k-ϵ turbulence model and two-layer all y + wall treatment. The thermal-fluid quantities of interest were compared between the contact strategies for each case. In Case 1, the hydraulic behavior was sensitive to the contact strategy, with large differences in the pressure drop (30%) and volume-average velocity (4%). The thermal behavior was not sensitive, with less than a 0.5% difference across the strategies. To better understand the separate effects of each heat transfer mode, Case 2 was divided into the following subcases: conduction (Case 2a); conduction/radiation (Case 2b); and conduction/radiation/convection (Case 2c). Case 2a represents an early phase of the PLOFC transient. Case 2b represents an intermediate phase of the PLOFC transient, with the pebble temperatures sufficiently high for the radiative heat transfer to be non-negligible. Case 2c represents a late phase of the PLOFC transient after the establishment of the natural circulation of the heat transfer fluid. For Case 2, large differences in the contact strategy were observed only in Case 2a with only conduction. The difference in the maximum pebble temperature was 23% in Case 2a, 2% in Case 2b, and 0.3% in Case 2c.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Structural Transformation Pathways of Multiferroic BiFeO 3 under High Pressures

High-pressure phase transitions in multiferroic BiFeO 3 have been investigated by synchrotron radiation X-ray diffraction up to ~54 GPa at room temperature. BiFeO 3 exhibits a complex structural behavior under high pressures. Four phase transitions with the phase sequence R3c → OI and OIII → OI → Pnma → Pnm2 1 were observed at ~3, ~6, ~12, and ~45 GPa, respectively. Because of octahedral tilts and cation displacements under high pressures, BiFeO 3 presents large unit cells and complex superstructures or domain structures between the stable R3c and Pnma phases. The OI and OIII phases have superstructure lattices √2a pc x 3√2b pc x c pc and √2a pc x 2√2b pc x 2c pc , respectively, and the OIII phase is isostructural with antiferroelectric PbZrO 3 (space group: Pbam). Here, the Pnma → Pnm2 1 transition at ~45 GPa indicates the occurrence of a large unit cell and an increase of the structural distortion. The Pnm2 1 phase with a superstructure lattice 2√2a pc x 2b pc x √2c pc has a group–subgroup relation with the Pnma phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of structural, magnetic and dielectric properties of R{sub 2}NiMnO{sub 6} (R = rare earth, Y)

We have investigated the structure, magnetic and dielectric properties of the double perovskite oxides, R{sub 2}NiMnO{sub 6} (R = Pr, Nd, Sm, Gd, Tb, Dy, Ho and Y). We could refine powder X-ray diffraction patterns of all the phases on the basis of monoclinic (P2{sub 1}/n) double perovskite structure where Ni and Mn atoms are ordered at 2c and 2d sites, respectively. All the phases are ferromagnetic insulators exhibiting relatively low dielectric loss and dielectric constants in the range 15-25. The ferromagnetic ordering temperature of the R{sub 2}NiMnO{sub 6} series seems to correlate better with the radius of R{sup 3+} atoms than with the average Ni-O-Mn angle ({phi}) in the double perovskite structure. These results are consistent with all samples having Mn{sup 4+} and Ni{sup 2+} with minimal antisite disorder.

36 MATERIALS SCIENCE↗

The local structure and composition of Ba{sub 4}Nb{sub 2}O{sub 9}-based oxycarbonates

X-ray powder-diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), infrared spectroscopy (IR), thermogravimetry (TG) and mass spectroscopy (MS) were performed to investigate the composition and the crystal structure of tetra-barium di-niobate (V) Ba{sub 4}Nb{sub 2}O{sub 9}. The TG, MS and IR studies revealed that the compound is a hydrated oxycarbonate. Assuming that the carbonate stoichiometrically replaces oxygen, the composition of the low-temperature {alpha}-modification, obtained by slow cooling from 1100 {sup o}C, corresponds to Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1H{sub 2}O, while the quenched high-temperature {gamma}-modification has the Ba{sub 4}Nb{sub 2}O{sub 8.42}(CO{sub 3}){sub 0.58}.0.38H{sub 2}O composition. The {alpha}-phase has a composite incommensurately modulated structure consisting of two mutually interacting [Ba]{sub {infinity}} and the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystems. The composite modulated crystal structure of the {alpha}-phase can be described with the lattice parameters a=10.2688(1) A, c=2.82426(8) A, q=0.66774(2)c* and a superspace group R3{sup -bar }m(00{gamma})0s. The HRTEM analysis demonstrates the nanoscale twinning of the trigonal domains parallel to the {l_brace}1 0 0{r_brace} crystallographic planes. The twinning introduces a one-dimensional disorder into the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystem, which results in an average P6{sup -bar }2c crystal structure of the {alpha}-phase. Possible places for the carbonate group in the structure are discussed using a comparison with other hexagonal perovskite-based oxycarbonates. - Graphical abstract: The composition and the local crystal structure of generally known {alpha}-Ba{sub 4}Nb{sub 2}O{sub 9} was studied. The compound is hydrated oxycarbonate with the composition of Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1 H{sub 2}O. It has a composite incommensurately modulated structure consisting of two mutually interacting subsystems, i.e., [Ba]{infinity} and the [(Nb,)O{sub 3}]{infinity} subsystem.

36 MATERIALS SCIENCE↗

Quantification of the importance of the modeling fidelity in the Best Estimate Plus Uncertainty analysis

In this work, the multi-physics coupling of CTF-PARCS for both steady-state and transient simulations is evaluated focusing on the quantification of the importance of the modeling fidelity when applied to the Best Estimate Plus Uncertainty safety analysis. For the steady-state, a Picard iteration approach is adopted in the coupled code while for the transient an explicit approach has been developed as a first step. The CTF-PARCS coupling is applied to the REA at HFP BOC scenario proposed in the exercise I-2c of LWR-UAM benchmark Phase III. Two different modeling choices are investigated for the nominal calculations. The first consists of including the 3D burnup information in CTF, and the second of modeling the spacers grids in both PARCS and CTF. It is observed that due to the degradation of the fuel thermal conductivity, the 3D burnup inclusion in CTF leads to significant higher centerline temperatures than the base case, with a difference up to 300 K. The spacer grids modeling shows the expected power and temperature decrease in the axial positions of the spacer grids. For the uncertainty quantification study, the multi-physics modeling including the burnup information in CTF is used. The results show that the inserted reactivity has a relative standard deviation of 13.6% mainly attributed to the nuclear data. The maximum linear power has a relative standard deviation of 16.2% due to the nuclear data as well, while the maximum centerline temperature has a relative standard deviation of 3.5% primarily caused by the fuel thermal conductivity. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Pressure-induced Structural Transformations in LanthanideTitanates: La2TiO5 and Nd2TiO5

The structure of orthorhombic rare earth titanates of La{sub 2}TiO{sub 5} and Nd{sub 2}TiO{sub 5}, where Ti cations are in five-fold coordination with oxygen, has been studied at high pressures by X-ray diffraction (XRD), Raman scattering measurements, and quantum mechanical calculations. Both XRD and Raman results indicated two pressure-induced phase transitions during the process. An orthorhombic super cell (a x b x 2c) formed at a pressure between 6 and 10 GPa, and then transformed to a hexagonal high-pressure phase accompanied by partial decomposition. The hexagonal high-pressure phase is quenchable. Detailed structural analysis indicated that the five-coordinated TiO{sub 5} polyhedra remain during the formation of super cell, but the orthorhombic-to-hexagonal phase transition at high pressures is a reconstructive process, and the five-fold Ti-O coordination increased to more than 6. This phase transition sequence was verified by quantum mechanical calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The systems Sr-Zn-{l_brace}Si,Ge{r_brace}: Phase equilibria and crystal structure of ternary phases

Phase relations have been established by electron probe microanalysis (EPMA) and X-ray powder diffraction (XPD) for the Sr-poor part of the ternary systems Sr-Zn-Si at 800 Degree-Sign C and Sr-Zn-Ge at 700 Degree-Sign C. In the Sr-Zn-Si system one new ternary compound SrZn{sub 2+x}Si{sub 2-x} (0{<=}x{<=}0.45) with CeAl{sub 2}Ga{sub 2} structure and a statistical mixture of Zn/Si in the 4e site was found. Neither a type-I nor a type-IX clathrate phase was encountered. This system is characterized by formation of two further phases, i.e. SrZn{sub 1-x}Si{sub 1+x} with ZrBeSi-type (0.16{<=}x{<=}0.22) and SrZn{sub 1-x}Si{sub 1+x} with AlB{sub 2}-type (0.35{<=}x{<=}0.65) with a random distribution of Zn/Si atoms in the 2c site. For the Sr-Zn-Ge system, the homogeneity regions of the isotypic phases SrZn{sub 1-x}Ge{sub 1+x} with ZrBeSi-type (0{<=}x{<=}0.17) and AlB{sub 2}-type (0.32{<=}x{<=}0.56), respectively, have been determined. Whereas the germanide SrZn{sub 2+x}Ge{sub 2-x} (CeAl{sub 2}Ga{sub 2}-type) is characterized by a homogeneity region (0{<=}x{<=}0.5), the clathrate type-I phase Sr{sub 8}Zn{sub 8}Ge{sub 38} shows a point composition. - Graphical abstract: Phase equilibria of ternary compounds in the Sr-Zn-Si-system at 800 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Phase equilibria in the Sr-Zn-Si-system are established at 800 Degree-Sign C. Black-Right-Pointing-Pointer Phase equilibria in the Sr-Zn-Ge-system are established at 700 Degree-Sign C. Black-Right-Pointing-Pointer Crystal structures of the ternary compounds were confirmed by X-ray powder diffraction. Black-Right-Pointing-Pointer All ternary compounds except the clathrate-I in the Ge-system are characterized by a homogeneity region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of particle size, cycling rate and temperature on the lithiation process of anatase TiO 2

The nature of a phase transition plays an important role in controlling the kinetics of reaction of an electrode material in a lithium-ion battery. The actual phase transition path can be affected by particle size and cycling rate. In this study, we investigated the phase transition process during the electrochemical Li intercalation of anatase TiO 2 as a function of particle size (25 nm and 100 nm), cycling rate (1C, 2C, 5C, 10C, 20C) and temperature (room temperature and 80 °C) by in situ synchrotron X-ray diffraction. The phase transition was found to be affected by the particle size: the 100 nm particles react simultaneously via a conventional nucleation and growth, i.e. two-phase, mechanism, while the 25 nm particles react sequentially via a two-phase mechanism. The Li miscibility gap decreases with increasing cycling rate, yet the phase separation was not suppressed even at a cycle rate of 20C. An increase in temperature from room temperature to 80 °C significantly improves the electrode's electrochemical performance despite undergoing a two-phase reaction. The failure to observe a continuous structural transition from tetragonal TiO 2 to orthorhombic Li 0.5 TiO 2 even at high rates and elevated temperature was attributed to the high energy barrier of a continuous phase transition path.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Azobenzene-based organic salts with ionic liquid and liquid crystalline properties

Two sets of new azobenzene-based bromide salts are synthesized, and their thermal photochromic properties are studied. Both sets are based on the imidazolium cation. The first set (1) features a symmetric biscation where two imidazolium head groups (Im) with different alkyl chains (Cn) are connected to a central azobenzene unit (Azo): [Azo(C1-Im-Cn) 2 ]; n = 6, 8, 10, 12, 14. The other one contains an n-alkyl-imidazolium cation (Cn-Im) bearing a terminal azobenzene unit (C1-Azo) substituted with an alkoxy chain (O-Cm) of either two (2) or six (3) carbon atoms: [C1-Azo-O-Cm-Im-Cn]; m = 2, n = 8, 10, 12 and m = 6, n = 8, 10, 12, 14, 16. For both cation classes, the influence of alkyl chains of varying length on the thermal phase behavior was investigated by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). For five compounds (Azo(-C1-Im-C12) 2 (1d), Azo(-C1-Im-C12) 2 (1e), C1-Azo-O-C2-Im-C10 (2b), C1-Azo-O-C2-Im-C12 (2c), and C1-Azo-O-C6-Im-C16 (3e)), the formation of a liquid crystalline phase was observed. The biscationic salts (1) are all comparatively high melting organic salts (180–240 °C), and only the two representatives with long alkylchains (C12 and C14) exhibit liquid crystallinity. The monocationic salts with an O–C2 bridge (2) melt between 140 and 170 °C depending on the alkyl chain length, but from an alkyl chain of 10 and more carbon atoms on they form a smectic A liquid crystalline phase. The representatives of the third set with a O–C6 bridge qualify as ionic liquids with melting points less than 100 °C. However, only the representative with a hexadecyl chain forms a liquid crystalline phase. Representative single crystals for all sets of cations could be grown that allowed for single crystal structure analysis. Together with small-angle X-ray scattering experiments they allow for a more detailed understanding of the thermal properties. As a result, through irradiation with UV-light (320–366 nm) all compounds undergo trans–cis isomerization, which reverses under visible light (440 nm).

36 MATERIALS SCIENCE↗

Phase Transformation Enables Stable Cycling and Fast Charging of Cation-Disordered Rocksalt Cathodes

Developing high-capacity, long-life cathodes is critical to overcome the energy limitations of current Li-ion batteries. In this work, we report a Li-excess cation-disordered rocksalt (DRX) cathode, Li 1.167 Mn0.7Ti 0.133 O 1.8 F 0.2 (M 0.7 F 0.2 ), which demonstrates excellent electrochemical performance. This cathode delivers a capacity approaching 250 mAh g –1 and maintains 200 mAh g –1 over 200 cycles with an average discharge voltage of 3.1 V at 2 V cutoff. The formation of a spinel-like phase during cycling enables fast charging, achieving over 240 mAh g –1 at 2C for 100 cycles. Combined X-ray absorption spectroscopy and transmission electron microscopy reveal reversible electrochemical redox processes and stable Mn local structures during 2 V discharge. These results highlight the potential of DRX cathodes for next-generation Li-ion batteries and provide insights into strategies to overcome kinetic limitations and optimize the cathode-electrolyte interface.

25 ENERGY STORAGE↗

Carbon Dioxide Utilization for Plasma Nanosynthesis of Carbon

This DOE Phase I SBIR project has developed a glow discharge-based plasma process to convert carbon dioxide to sold carbon and water. By adding natural gas, the additional enthalpy can be used to reform the output carbon dioxide to value added carbon and EPA-compliance-grade water, thus creating a process that has no gaseous products at all, such as: CO 2 + CH 4 → 2C + 2H 2 O, which is simply the exothermic reverse of the syngas reaction. During the Phase I work, several milestones were accomplished successfully. a. First, a synthesis reactor was designed, assembled, and successfully operated using the combined simultaneous operation of glow discharge and microwaves. DC discharge and microwaves can also be operated individually, allowing multiple configurations to be used This is one of the first reactors of its kind, and perhaps the first ever. b. Second, the research team successfully produced carbon nanomaterials using carbon dioxide as the source of carbon via CO 2 + 2H 2 → C + 2H 2 O. This is certainly one of the first processes to use plasma to convert carbon dioxide to nanocarbon, and perhaps the first ever demonstration. c. Third, it was also shown that carbon monoxide and carbon dioxide can be used with methane to reduce the synthesis temperature of ASI graphene decorated carbon nanotubes (GDCNT). Hitherto GDCNT were only fabricated above 1200 °C. GDCNT was synthesized at 780 °C. CO 2 + C → 2CO; 2 CO + CH 4 → 3 C + 2H 2 O, and also, CH 4 + CO 2 → 2 C + 2H 2 O. d. Fourth, closed cycle synthesis of nanomaterial was demonstrated with over 80% conversion of carbon dioxide to carbon and water was achieved, on the basis of pressure drop during glow discharge. e. Fifth, plasma operation was achieved via glow discharge and microwaves at 500 Torr, demonstrating a path forward to atmospheric pressure operation f. Sixth, using carbon monoxide and carbon dioxide in an electrothermal furnace, we produced 350 grams per hour of high-quality nanotubes in a single furnace, compared to 200 grams per hour for the commercial process. Controlling the enthalpy prevents self-extinguishing hot gas pyrolysis. Thus, carbon dioxide enhances the properties and reduces the production cost. This is a near term advance that can go into trial production in the near term. g. Seventh, economic analysis suggests an economic plan forward, producing carbon nanotubes for less than $50 per pound. The use of hydrogen and carbon dioxide as the feedstocks is acceptable from a cost basis, and in fact hydrogen is less expensive than carbon monoxide. Niche applications are available in the near term, though quantities relevant to sequestration remain a far-term goal. h. Eighth, though it was not the research team’s intention to create a new process for producing carbon monoxide, it was realized that almost by accident we demonstrated plasma reforming of carbon dioxide via a plasma version of the reverse Boudouard reaction. Accordingly, we have contacted a major gas manufacturer (Matheson Gas) to determine whether there is interest in creating an industrial version of the process. i. Ninth, a long-range strategy is identified in which a progressively more carbon-conscious world will seek to create solid carbon as a means of sequestering carbon dioxide, impeding its return to the atmosphere. In the long term the price must drop by orders of magnitude with larger production, and assuming success, solid carbon could be the preferred form for sequestration rather than underground storage. If carbon can be made as cheaply as dirt, or nearly so, then it can serve a useful purpose as structural material for housing, soil amendments in agriculture and fillers to modify low areas.

03 NATURAL GAS↗

Crystal structure and monoclinic distortion of glaserite-type Ba{sub 3}MnSi{sub 2}O{sub 8}

Highlights: • Glaserite-type Ba{sub 3}MnSi{sub 2}O{sub 8} is hexagonal P-3m1 at room temperature. • Below ~ 250 K the structure undergoes transition to monoclinic C2/c. • The transition is driven by in-plane displacement of the apical oxygen atoms. • No magnetic transition was observed down to 1.6 K but expected at lower temperature. - Abstract: Crystal structure and magnetic properties of glaserite-type Ba{sub 3}MnSi{sub 2}O{sub 8} were investigated using variable temperature neutron powder diffraction and magnetometry. At room temperature the composition is hexagonal and the crystal structure is best described by the P-3m1 space group (a~ 5.7 Å, c~ 7.3 Å) with the apical oxygen atom modelled on a split site. On cooling below ~ 250 K the structure undergoes a phase transition into a monoclinic C2/c form (√3a{sub hex}, a{sub hex}, 2c{sub hex}, β~ 90°). Analysing diffraction data in terms of symmetry-adapted distortion modes suggests that the transition is primarily driven by increasing in-plane displacements of O1, which in turn results in the coupled tilting of [SiO{sub 4}] and [MnO{sub 6}] octahedra and in-plane displacements of Ba1 atoms. Magnetic susceptibility measurements and neutron powder diffraction data show no evidence for long-range magnetic ordering down to 1.6 K, although the development of magnetic diffuse scattering suggests that a magnetic transition may take place at lower temperature.

36 MATERIALS SCIENCE↗

Measurement of top-quark pair production in association with charm quarks in proton–proton collisions at √s = 13 TeV with the ATLAS detector

Inclusive cross-sections or top-quark pair production in association with charm quarks are measured with proton-proton collision data at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 140 fb -1 , collected with the ATLAS experiment at LHC between 2015 and 2018. The measurements are performed by requiring one or two charged leptons (electrons and muons), two b-tagged jets, and at least one additional jet in the final state. A custom flavor-tagging algorithm is employed for the simultaneous identification of b-jets and c-jets. In a fiducial phase space that replicates the acceptance of the ATLAS detector, the cross-sections for $t\bar{t}$ + ≥ 2c and $t\bar{t}$ + 1c production are measured to be $1.28^{+0.27}_{-0.24}$ pb and $6.4^{+1.0}_{-0.9}$ pb, respectively. The measurements are primarily limited by uncertainties in the modeling of inclusive $t\bar{t}$ and $t\bar{t}$ + $b\bar{b}$ production, in the calibration of the flavor-tagging algorithm, and by data statistics. Cross-section predictions from various $t\bar{t}$ simulations are largely consistent with the measured cross-section values, though all underpredict the observed values by 0.5 to 2.0 standard deviations. In a phase-space volume without requirements on the $t\bar{t}$ decay products and the jet multiplicity, the cross-section ratios of $t\bar{t}$ + ≥ 2c and $t\bar{t}$ + 1c to total $t\bar{t}$ + jets production are determined to be (1.23 ± 0.25)% and (8.8 ± 1.3)%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗