Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase Transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The role of ternary alloying elements in eutectoid transformation of U-10Mo alloy part II. In and Ex-situ Neutron diffraction-based assessment of eutectoid phase transformation kinetics in U-9.8Mo-0.2X alloy (X = Cr, Ni or Co)

HExploring the effects of minor ternary alloying additions, typically impurity elements, on the phase stability of U-10Mo is important for preventing undesirable phase decomposition during processing or during service. This work examines the influence small ternary additions of Cr, Ni, and Co. Both in-situ and ex-situ neutron diffraction measurements made during and after high temperature (450 – 525°C) exposures were used to better define the influence of these elements on the time-temperature-transformation (TTT) behavior of U-10Mo, providing information which is complementary to electron microscopy investigations of the same alloy systems performed in the first part of this work. Minor additions of Ni and Co decrease the ?-phase stability at all temperatures investigated. Signatures of U6X (X = Ni or Co) compounds were shown to be present in amounts of up to 6 wt% in the heat treated alloys, suggesting that the initial precipitation of this phase may catalyze further ?-phase decomposition. On the other hand, the Cr containing alloys were observed to have nearly the same, and in some cases slower, phase transformation kinetics when compared to the binary U-10Mo control samples. The results of the study have enabled preliminary estimates of the TTT curves for the ternary alloys.

phase transformation, kinetics, discontinuous prec↗
DOE OSTI2018

Synergy between phase transformation and domain switching in two morphotropic phase boundary ferroelectrics

We present that many applications of ferroic materials take advantage of the microstructural redistribution under an external stimulus. Despite extensive studies on the microstructural evolution during both domain switching and phase transformations of high-performance ferroelectrics near morphotropic phase boundaries (MPBs), the synergetic interactions between both leading factors remain unclear. Herein, we have illustrated and discerned the correlative response of phase transformation and domain switching in an archetypical piezoceramic of PbTiO 3 -BiScO 3 using a combination of in situ high-energy synchrotron x-ray diffraction and phase-field simulations. The direct structural evidence and domain development from simulations reveal a significant reversible orientation-dependent emerging phase transformation and enhanced domain switching. Increasingly populated polarization variants aligned with the applied electric field owing to this strong synergistic interaction play an important role in enhancing the piezoelectric performances of MPB ferroelectrics. Lastly, in addition to providing further insight into the microstructures of ferroelectrics, the present results have the potential to guide the design of high-performance materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mapping the Complete Reaction Energy Landscape of a Metal–Organic Framework Phase Transformation

Crystalline materials undergo valuable phase transformations, and the energetic processes that underlie these transformations can be fully characterized through a combination of thermodynamic and kinetic studies. Here, we report the first complete reaction energy landscape of metal–organic framework (MOF) interpenetration, specifically in the phase transformation of NU-1200 to its doubly interpenetrated counterpart, STA-26. We characterized the thermodynamics of this phase transformation by pairing experiments with density functional theory (DFT) calculations. This analysis revealed that factors such as the increase in crystal density likely drive Zr- and Hf-NU-1200 to STA-26 interpenetration, while other chemical interactions such as steric repulsions prevent Th-NU-1200 from interpenetrating. Using time-resolved in situ X-ray diffraction, we monitored phase transformation reaction profiles and extracted quantitative kinetic information using the Avrami-Erofe’ev model. As a result, we obtained activation energies for the Zr- and Hf-NU-1200 transformations to Zr- and Hf-STA-26, respectively, revealing slower phase change kinetics for MOFs with stronger bonds. Finally, we paired the kinetic data with experimental observations to classify the mechanistic model of this phase transformation as partial dissolution. Here, we anticipate that this thermodynamic, kinetic, and mechanistic understanding will broadly inform further studies on the energetics of crystallization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2019

Phase transformations of Al-bearing high-entropy alloys Al x CoCrFeNi (x = 0, 0.1, 0.3, 0.75, 1.5) at high pressure

Pressure-induced structural modifications in high-entropy alloys with varying Al contents, Al x CoCrFeNi (x = 0, 0.1, 0.3, 0.75, 1.5), have been investigated at pressures up to ~50 GPa by synchrotron X-ray diffraction and, following depressurization, by transmission electron microscopy (TEM). In Al x CoCrFeNi compounds with x ≤ 0.3, all of which exhibit an initial single-phase face-centered cubic (fcc) structure, proportionality between the Al content and the critical pressure for transformation to hexagonal close-packed (hcp) phases, distinguished by a distinct planar stacking sequence, is observed. This is attributed to the structural distortion arising from the large size of Al atoms relative to those of the other constituent elements, which results in an increase in the formation energy of stacking faults and a decrease in compressibility. High-resolution TEM results demonstrate variation of the stacking sequence from ABCABC, typical of fcc materials, to ABABAB, typical of hcp materials, in CoCrFeNi following high pressure. In Al 0.75 CoCrFeNi, which exhibits an initial dual-phase structure [fcc and body-centered cubic (bcc)], the result again shows the formation of a (hcp) phase despite its higher Al content, suggesting that the bcc phase may be more amenable to pressure-induced phase modification than is the fcc phase, which is absent for lower Al contents. However, the trend of transformation inhibition by increasing the Al content is again observed, with Al 1.5 CoCrFeNi retaining its initial structure up to the highest pressure achieved. Furthermore the determination of these compositional trends in the high-pressure phase response of these materials may enable the production of new phase mixtures with precisely tuned phase proportions and potentially desirable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reversible phase transformations between Pb nanocrystals and a viscous liquid-like phase

Phase transformations have been a prominent topic of study for both fundamental and applied science. Solid-liquid reaction–induced phase transformations can be hard to characterize, and the transformation mechanisms are often not fully understood. Here, we report reversible phase transformations between a metal (Pb) nanocrystal and a viscous liquid-like phase unveiled by in situ liquid cell transmission electron microscopy. The reversible phase transformations are obtained by modulating the electron current density (between 1000 and 3000 electrons Å –2 s –1 ). The metal-organic viscous liquid-like phase exhibits short-range ordering with a preferred Pb-Pb distance of 0.5 nm. Assisted by density functional theory and molecular dynamics calculations, we show that the viscous liquid-like phase results from the reactions of Pb with the CH 3 O fragments from the triethylene glycol solution under electron beam irradiation. Such reversible phase transformations may find broad implementations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

This study investigates the structural evolution of LiMn0.5Ni0.5O2 cathode materials for Li-ion batteries as a function of synthesis temperature and its effect on electrochemical performance. It is demonstrated that, as the synthesis temperature increases from 400 to 900 ?C, a gradual topotactic transformation occurs between a lithiated spinel structure, denoted herein as “lithium-excess spinel” LxS-LiMn0.5Ni0.5O2 (or LxS-LMNO), and the well-known layered LiMn0.5Ni0.5O2 structure prepared at high temperature, HT-LiMn0.5Ni0.5O2 (HT-LMNO). The electrochemical capacity of the LiMn0.5Ni0.5O2 electrodes follows a parabolic trend with increasing synthesis temperature, which is attributed primarily to the gradual transformation of 3-dimensional (3-D) to 2-dimensional (2-D) diffusion pathways for the Li ions. When synthesized at 400 °C, LxS-LiMn0.5Ni0.5O2 electrodes perform well, benefitting from the 3-D network of channels within the LxS structure. By contrast, when prepared at 500-700 °C, LiMn0.5Ni0.5O2 electrodes operate poorly, which is attributed to the formation of locally disordered structural arrangements that impede Li-ion diffusion. Such an increase in local disorder in the mid-temperature synthesis range is attributed to the structural frustration between the lithium-excess spinal and layered end-members. The transformation from the locally disordered to more ordered layered components between 700 °C and 900 °C enhances electrochemical performance. The study opens new avenues for designing next-generation Mn-rich cathode materials by fine-tuning the synthesis conditions as well as the composition and structure of LxS-LMNO electrodes.

energy storage↗
DOE OSTI2026

PyJMAK: An Open-Source Python Toolkit for Modeling Solid-State Metallurgical Phase Transformations

Accurate prediction of metallurgical phase transformations is an essential basis for autonomous optimization and rapid part qualification. Several methods can be used to estimate the evolution of phase fractions such as JMAK kinetics-based models, phase-field models, thermodynamic models, and data-driven machine learning models. Thermodynamic and phase-field-based methodologies solve multiphysics equations requiring numerous calibration parameters and significant computational resources. As a result, the computation domain is limited to a point or on order of micron-meters. The data-driven models rely on large datasets from experiments and simulations. While the JMAK model only provides information about phase fraction evolution, it can predict this evolution in near real-time using thermal history and thermodynamic data without restriction on the domain. JMAK models have been popularly used by researchers to model phase transformations occuring during additive manufacturing or over arbitrary temperature profiles. Commercial proprietary software such as Abaqus and Ansys or closed-source in-house implementations offer the ability to model JMAK based kinetics to predict phase transformation. However, these software packages are not open-source or freely available for use and development in conjunction with manufacturing machines, sensors, and machine learning algorithms. In addition, the use of the model is restricted by a license token. In contrast, given temperature profiles at multiple points in the domain, this Python-based PyJMAK model can compute phase evolution in parallel due to its stand-alone modular, voxel-based structure, and it can be executed on high-performance computing resources without any license restrictions.

Prabhune, Bhagya [Oak Ridge National Laboratory (O↗