Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phosphorescence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Photostability of blue phosphorescent films on plasmonic surfaces

Organometallic phosphors are an important class of emissive materials used in high-efficiency organic light-emitting devices. However, problems of low photostability arise for blue-emitting phosphors due to chemical and environmental degradation and triplet quenching processes. Various approaches have been developed to improve the photostability of such phosphors, including the design of new organometallic molecules and control of host-dopant composition in thin films. Here, we demonstrate a different approach for improving the photostability of blue organometallic phosphors that uses localized surface plasmon resonances to increase the triplet recombination rate. The increased recombination rate improves the photostability of the phosphor due to the reduction in triplet quenching pathways. We show that the lifetime of phosphorescence is decreased significantly by nanoparticle-based plasmonic surfaces, which improves the photostability of the blue organometallic phosphor by up to a factor of 3.6. Other plasmonic surfaces are also tested and exhibit less significant photostability improvements due to a reduced spectral overlap of the plasmonic modes with the emitter and lower mode confinement. The use of plasmonic surfaces to improve phosphor photostability at blue wavelengths is distinct from other approaches because it involves modification to the local electromagnetic environment of the phosphor rather than modifications to the phosphor molecular structure or the emitting material composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Room‐Temperature Phosphorescent Platinum(II) Alkynyls with Microsecond Lifetimes Bearing a Strong‐Field Pincer Ligand

Abstract The use of organometallic triplet emitters in organic light emitting diodes (OLEDs) is motivated by the premise of efficient intersystem crossing leading to unit internal quantum efficiencies. However, since most devices are based on solid‐state components, an inherent limitation to square‐planar platinum(II) phosphors is their tendency toward aggregation‐based quenching. Here, a new class of emissive, four‐coordinate Pt II species based on the bisimidazolyl carbazolide (BIMCA) ligand is introduced, which displays highly efficient, long‐lived solid‐state phosphorescence at room temperature. A set of four BIMCAPt phenyl acetylides were synthesized that emit in the green ( λ max =507–540 nm) with >60 % quantum yield and millisecond lifetimes. The structures of the resulting species reveal a non‐planar structure imposed by steric clashes between BIMCA and the iodo or alkynyl co‐ligand. Ground‐state and photophysical characterization are presented. Density functional theory calculations indicate that the BIMCA ligand dominates the frontier orbitals along with the first Franck–Condon singlet and triplet excited states.

Liska, Tadeas↗
DOE OSTI2021

Metal Halide Scaffolded Assemblies of Organic Molecules with Enhanced Emission and Room Temperature Phosphorescence

Ionically bonded organic metal halide hybrids have emerged as versatile multicomponent material systems exhibiting unique and useful properties. The unlimited combinations of organic cations and metal halides lead to the tremendous structural diversity of this class of materials, which could unlock many undiscovered properties of both organic cations and metal halides. Here we report the synthesis and characterization of a series benzoquinolinium (BZQ) metal halides with a general formula (BZQ)Pb 2 X 5 (X = Cl, Br), in which metal halides form a unique two-dimensional (2D) structure. These BZQ metal halides are found to exhibit enhanced photoluminescence and stability as compared to the pristine BZQ halides, due to the scaffolding effects of 2D metal halides. Optical characterizations and theoretical calculations reveal that BZQ + cations are responsible for the emissions in these hybrid materials. Changing the halide from Cl to Br introduces heavy atom effects, resulting in yellow room temperature phosphorescence (RTP) from BZQ + cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Combining Fluorescence and Phosphorescence to Achieve Very Long Lifetime and Efficient White OLEDs (Final Technical Report)

The objective of our project was to develop a high efficiency, long lived WOLED using a hybrid approach to harvesting singlet and triplet excitons, as described above. WE met out GONOGO metric at the end of year one, achieving an efficiency of nearly 50 lm/W for high quality white light emission. We faced an unforeseen problem in achieving this high efficiency level at high brightness. Our hybrid devices showed a significant roll off in device efficiency as the current is raised, such that our efficiency dropped to ca. 10 lm/W at 1000 nits. This roll off precluded us form achieving our send year targets with regards to efficiency at high brightness and long device lifetime. We spent the majority of our efforts in year two trying to decrease or eliminate this efficiency roll off, but this roll off prevented us from reaching our end of program target of high efficiency at high brightness with long device lifetime. Toward the end of the sixth quarter of the program we began to investigate a new approach, which involved a tandem WOLED, with a hybrid blue/red OLED stacked on a phosphorescent green OLED. The resultant emission from the stack will be white and the tandem structure relaxes the constraints on the materials, which we believe is key issue in the high roll off in efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improved Light Extraction by Engineering Molecular Properties of Square Planar Phosphorescent Emissive Materials

The ultimate objective of this project was to develop a cost-effective technology which could significantly improve the light outcoupling efficiency up to 70% and higher and the key tasks were listed as follows: (i) improving light extraction efficiency through a better control of horizontally aligned emitting dipoles of square planar phosphorescent emitters; (ii) fabricating high-efficiency monochromic and amber OLED in the device settings; (iii) fabricating high-efficiency white OLED in the device settings. With both materials innovation and device structure optimization, we realized OLEDs with an EQE of 66% with a LT 95 lifetime of over 100 khrs at a brightness of 1,000 cd/m 2 . This proposed research is a high impact project which could potentially revolutionize OLED lighting technology and expedite the commercialization process of OLED technology for solid state lighting. This project outcomes contributed to meet the targeted performance of organic solid state lighting set in the DOE MYPP.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Fluorescence and phosphorescence of photomultiplier window materials under electron irradiation

The fluorescence and phosphorescence of photomultiplier window materials under electron irradiation were investigated using a Sr-90/Y-90 beta emitter as the electron source. Spectral emission curves of UV grade, optical grade, and electron-irradiated samples of MGF2 and LiF, CaF2, BaF2, sapphire, fused silica, and UV transmitting glasses were obtained over the spectral range of 200 nm to 650 nm. Fluorescence yields, expressed as the number of counts in a solid angle of 2 pi steradian per 1MeV of incident electron energy deposited, were determined on these materials utilizing photomultiplier tubes with cesium telluride, bialkali, and trialkali (S-20) photocathodes, respectively.

Viehmann, W.↗
DOE OSTI2022

N-heterocyclic carbene platinum-butadiyne Click/iClick complexes. Towards blue-violet phosphorescence

By employing two different methods, namely, Click and iClick, a series of four trans-NHC-Pt(II) triazole-acetylide complexes containing benzyl (3a), methylnaphthalene (3b), methylanthracene (3c), and phenyl (3d) substituents at the terminal triazole ring were synthesized and characterized. The traditional click approach involves first synthesizing a triazole-acetylene and then attaching to the Pt ion. In the iClick approach, the triazole is formed via cycloaddition by combining a trans-platinum butadiyne with the corresponding organic azide. The complexes were interrogated to determine the effects of conjugation and ligand substituent on their photophysical properties. Complex 3a exhibits a photoluminescence lifetime of 4.3 μs at 77 K. Ascribed to emission from conformers differing due to the torsion of the aryl acetylide ligands, employing different excitation wavelengths results in different emission spectra. Complex 3a emits in the violet region with CIE coordinates of (0.159, 0.021) under 290 nm excitation and shifts to CIE coordinates of (0.161, 0.019) under 320 nm excitation. Finally, complex 3d, having a photoluminescence lifetime of 13.1 μs at room temperature, emits in the sky-blue region with CIE coordinates of (0.237, 0.355).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Novel Blue Phosphorescent Emitter Materials for OLED Lighting (Phase 1 FY2019 Final Technical Report)

Research carried out under the DOE SBIR Phase I project has resulted in the identification of novel blue emitter materials that have application for OLED lighting. The materials demonstrate the capability to produce blue light when incorporated in thin-films which are useful for OLED lighting. The technology offers the potential to combine high efficiency, operational stability suitable for commercial application and lower manufacturing cost. The materials are also considered scalable for manufacturing/commercialization operations. Discovery of efficient and operationally stable blue emitters that are scalable represent a long-standing challenge for the advancement of OLED lighting.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cyclometalation Syntheses of Phosphorescent Complexes

This is a final close-out report for DOE contract DE-SC0010714 at Case Western Reserve University in Cleveland, Ohio, that funded organometallic and photophysical research from 1 May 2013–30 April 2020. Highlights of research results are presented along with lists of graduate and undergraduate students supported and original papers acknowledging DOE BES support.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Improved Operational Stability of Blue Phosphorescent OLEDs by Functionalizing Phenyl‐Carbene Groups of Tetradentate Pt(II) Complexes

Abstract Stable and efficient deep‐blue organic light‐emitting diodes (OLEDs) are in high demand for display and lighting applications but are rarely reported due to their poor operational lifetimes. Herein, the study designs and synthesizes two novel N ‐heterocyclic carbene (NHC)‐based tetradentate Pt(II) complexes PtON5‐dtb and PtON5N‐dtb, and thoroughly investigate their electrochemical and photophysical properties. Functionalization of the NHC moieties can increase the metal‐to‐ligand charge transfer ( 1/3 MLCT) characters in their lowest triplet excited‐states, resulting in significantly shortened photoluminescent lifetimes and remarkably improved device performance. A deep blue OLED employing PtON5N‐dtb as an emitter exhibits a narrow spectral bandwidth with a full‐width at half maximum (FWHM) of 30 nm and a CIE y value of 0.17 and demonstrates a maximum external quantum efficiency (EQE) of 20.4% with a small efficiency roll‐off, which maintains a high EQE of 18.5% at 1000 cd m −2 . Moreover, the deep blue OLED also realizes a long‐measured operational lifetime LT 90 (time to 90% of the initial luminance) of 71 hours with an initial brightness of 1134 cd m −2 , corresponding to an estimated device lifetime LT 90 of 85 h at 1000 cd m −2 . This represented an eightfold lifetime improvement for PtON5N‐dtb‐based deep blue OLED compared to PtON7‐dtb in the same device setting.

Li, Guijie↗