SEARCH · Search NASA
Results for “Photocatalytic activity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stabilization of Photocatalytically Active Uranyl Species in a Uranyl–Organic Framework for Heterogeneous Alkane Fluorination Driven by Visible Light
When photoactivated, the uranyl ion is a robust oxidant capable of abstracting hydrogen atoms from nonactivated C–H bonds. Yet, the highly reactive singly reduced [U V O 2 ] + intermediate is unstable with respect to disproportionation to the uranyl dication and insoluble tetravalent uranium phases, which limits the usage of uranyl ions as robust photocatalysts. Herein, we demonstrate that photoactivated uranyl ions can be stabilized by immobilizing and separating them spatially in a uranyl–organic framework heterogeneous catalyst, NU-1301. The visible-light-photoactivated uranyl ions in NU-1301 demonstrated longer-lived U(V) and radicals than those in homogeneous counterparts, as evidenced by X-ray photoelectron spectroscopy and time-dependent electron paramagnetic resonance, leading to higher turnovers and enhanced stability for the fluorination of nonactivated alkanes.
High-Resolution Mapping of Photocatalytic Activity by Diffusion-Based and Tunneling Modes of Photo-Scanning Electrochemical Microscopy
Not Available
Luminescent N-heterocyclic carbene Cu( I ) complexes with N^O chelating ligands exhibit microsecond lifetimes and photocatalytic activity
To replace precious noble metal-based photosensitizers in applications involving photoinduced charge separation, energy transfer, or photocatalysis, Cu(I) complexes are considered to be cost-effective, earth-abundant, and sustainable alternatives. An emerging and effective design principle in Cu(I) photosensitizers involves heteroleptic structures where the HOMO and LUMO are spatially separated over two different ligands. In the present work, we introduce a complementary class of heteroleptic, three-coordinate copper photosensitizers that pairs variable N^O chelating ligands (8-hydroxyquinoline and 10-hydroxybenzo[h]quinoline) with a bulky 2,6-diisopropylphenyl-substituted N-heterocyclic carbene (NHC). In this design, both frontier orbitals are localized on the same ligand, the N^O chelate, such that structural modulation of the electron-rich N^O-chelates can substantially tune the energy levels of the HOMO and LUMO, thereby controlling the photoluminescence properties. Detailed photophysical and electrochemical experiments as well as DFT calculations suggest charge-transfer transitions with intra-ligand charge transfer (ILCT) character, involving the N^O ligands. This strategy successfully produced long triplet excited-state lifetimes (up to 44 µs) in compounds that are strong photoreductants (E([Cu] + /*[Cu] as negative as −2.0 V vs. the ferrocenium/ferrocene couple). These properties allow these photosensitizers to be used as photocatalysts in various transformations of organic compounds, such as hydrogenation of substituted benzophenones, hydrodehalogenation of aryl/alkyl halides (including challenging C–Cl bond activation) and E/Z isomerization of (E)-stilbene (an example of triplet–triplet energy transfer).
Interfacial Self-Assembly of Hierarchically Structured Nanoparticles with Photocatalytic Activity.
Abstract not provided.
Shape-Selective Mesoscale Nanoarchitectures: Preparation and Photocatalytic Performance
We create ordered arrays of shape-selective gold-titania composite nanomaterials at the mesoscale (100 µm to 5 mm) by a combination of both bottom-up and top-down approaches for exquisite control of the size, shape, and arrangement of nanomaterials. Lithographic techniques along with wet chemical synthetic methods were combined to create these composite nanomaterials. The photocatalytic activity of these TiO 2, TiO 2 -Au and SiO 2 -TiO 2 -Au nano-composite mesoscale materials was monitored by the photodegradation of a model analyte, methyl orange, under UV and visible (Vis) illumination. Bare TiO 2 - and SiO 2 -TiO 2 -coated pillar arrays showed significant activity toward methyl orange in UV light with degradation rates on the order of 10 −4 –10 −3 min −1 . The photocatalytic activity of these arrays was also found to depend on the nanoparticle shape, in which particles with more edges and corners were found to be more reactive than spherical particles (i.e., the photocatalytic activity decreased as follows: diamonds > squares > triangles > spheres). SiO 2 -TiO 2 -Au nano-composite pillar arrays were tested in both UV and Vis light and showed increased activity in Vis light but decreased activity in UV light as compared to the bare semiconductor arrays. Additionally, the Au nanorod-functionalized nanoarrays exhibit a strong shape-dependence in their photocatalytic activity toward methyl orange degradation in Vis light.
Effect of Carbon Doping on CO 2 –Reduction Activity of Single Cobalt Sites in Graphitic Carbon Nitride
Single atom catalysts have demonstrated interesting activity in a variety of applications. In this study, we prepared single C o2+ sites on graphitic carbon nitride (C 3 N 4 ), which was doped with carbon for enhanced activity in visible-light CO 2 reduction. The synthesized materials were characterized with a variety of techniques, including microscopy, X-ray powder diffraction, UV-vis spectroscopy, infrared spectroscopy, photoluminescence spectroscopy, and X-ray absorption spectroscopy. Here, doping C 3 N 4 with carbon was found to have profound effect on the photocatalytic activity of the single Co 2+ sites. At relatively low levels, carbon doping enhanced the photoresponse of C 3 N 4 in the visible region and improved charge separation upon photoactivation, thereby enhancing the photocatalytic activity. Furthermore, high levels of carbon doping were found to be detrimental to the photocatalytic activity of the single Co 2+ sites by altering the structure of C 3 N 4 and generating defect sites responsible for charge recombination.
Hot Electron-Driven Photocatalysis Using Sub-5 nm Gap Plasmonic Nanofinger Arrays
Semiconductor photocatalysis has received increasing attention because of its potential to address problems related to the energy crisis and environmental issues. However, conventional semiconductor photocatalysts, such as TiO2 and ZnO, can only be activated by ultraviolet light due to their wide band gap. To extend the light absorption into the visible range, the localized surface plasmon resonance (LSPR) effect of noble metal nanoparticles (NPs) has been widely used. Noble metal NPs can couple incident visible light energy to strong LSPR, and the nonradiative decay of LSPR generates nonthermal hot carriers that can be injected into adjacent semiconductor material to enhance its photocatalytic activity. Here we demonstrate that nanoimprint-defined gap plasmonic nanofinger arrays can function as visible light-driven plasmonic photocatalysts. The sub-5 nm gaps between pairs of collapsed nanofingers can support ultra-strong plasmon resonance and thus boost the population of hot carriers. The semiconductor material is exactly placed at the hot spots, providing an efficient pathway for hot carrier injection from plasmonic metal to catalytic materials. This nanostructure thus exhibits high plasmon-enhanced photocatalytic activity under visible light. The hot carrier injection mechanism of this platform was systematically investigated. The plasmonic enhancement factor was calculated using the finite-difference time-domain (FDTD) method and was consistent with the measured improvement of the photocatalytic activity. This platform, benefiting from the precise controllable geometry, provides a deeper understanding of the mechanism of plasmonic photocatalysis.
Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts
Colloidal organic nanoparticles have proven to be a promising class of photocatalyst for performing the Hydrogen Evolution Reaction (HER) due to their dispersibility in aqueous environments, their strong absorption within the visible region, and the tunabilty of their component materials' redox potentials. Currently, there is little understanding of how charge generation and accumulation in organic semiconductors change when these materials are formed into nanoparticles that share a high interfacial area with water, nor is it known what mechanism limits the hydrogen evolution efficiency in recent reports on organic nanoparticle photocatalysts. Herein, we use Time-Resolved Microwave Conductivity to study aqueous-soluble organic nanoparticles and bulk thin films composed of various blend ratios of the non-fullerene acceptor EH-IDTBR and conjugated polymer PTB7-Th and examine the relationship between composition, interfacial surface area, charge carrier dynamics, and photocatalytic activity. We quantitatively measure the rate of Hydrogen Evolution Reaction by nanoparticles composed of various donor:acceptor blend ratio compositions and find that the most active blend ratio displays a Hydrogen Quantum Yield of 0.83% per photon. Moreover, we find that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3x more long-lived accumulated charges relative to bulk samples of the same material composition. Here these results suggest that, under our current reaction conditions, with approximately 3x solar flux, catalytic activity by these nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface cites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.
Photocatalytic C–H activation and the subtle role of chlorine radical complexation in reactivity
A complex role for chlorine radicals Radicals are atoms or molecules that are highly reactive because they have an unpaired electron. A common means of investigating whether they are involved in a particular reaction is to try to trap them with an acceptor compound. Yang et al. reinvestigated a photoinduced alkane oxidation reaction for which a trapping study had previously implicated alkoxy radicals. Their spectroscopic, kinetic, and isotopic labeling studies revealed that chlorine, rather than alkoxy, was the key radical intermediate; the prior trapping results had stemmed from its complexation with alcohols. Science , abd8408, this issue p. 847
Biomimetic Catalysts Based on Au@ZnO–Graphene Composites for the Generation of Hydrogen by Water Splitting
For some decades, the scientific community has been looking for alternatives to the use of fossil fuels that allow for the planet’s sustainable and environmentally-friendly development. To do this, attempts have been made to mimic some processes that occur in nature, among which the photosystem-II stands out, which allows water splitting operating with different steps to generate oxygen and hydrogen. This research presents promising results using synthetic catalysts, which try to simulate some natural processes, and which are based on Au@ZnO–graphene compounds. These catalysts were prepared by incorporating different amounts of gold nanoparticles (1 wt.%, 3 wt.%, 5 wt.%, 10 wt.%) and graphene (1 wt.%) on the surface of synthesized zinc oxide nanowires (ZnO NWs), and zinc oxide nanoparticles (ZnO NPs), along with a commercial form (commercial ZnO) for comparison purposes. The highest amount of hydrogen (1127 μmol/hg) was reported by ZnO NWs with a gold and graphene loadings of 10 wt.% and 1 wt.%, respectively, under irradiation at 400 nm. Quantities of 759 μmol/hg and 709 μmol/hg were obtained with catalysts based on ZnO NPs and commercial ZnO, respectively. The photocatalytic activity of all composites increased with respect to the bare semiconductors, being 2.5 times higher in ZnO NWs, 8.8 times higher for ZnO NPs, and 7.5 times higher for commercial ZnO. The high photocatalytic activity of the catalysts is attributed, mainly, to the synergism between the different amount of gold and graphene incorporated, and the surface area of the composites.