Search NASA⌕ Search

SEARCH · Search NASA

Results for “Planetary differentiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Speckle Imaging Characterization of Radial Velocity Exoplanet Systems

We conducted speckle imaging observations of 53 stellar systems that were members of long-term radial velocity (RV) monitoring campaigns and exhibited substantial accelerations indicative of planetary or stellar companions in wide orbits. Our observations were made with blue and red filters using the Differential Speckle Survey Instrument at Gemini-South and the NN-Explore Exoplanet Stellar Speckle Imager at the WIYN telescope. The speckle imaging identifies eight luminous companions within 2″ of the primary stars. In three of these systems—HD 1388, HD 87359, and HD 104304—the properties of the imaged companion are consistent with the RV measurements, suggesting that these companions may be associated with the primary and the cause of the RV variation. For all 53 stellar systems, we derive differential magnitude limits (i.e., contrast curves) from the imaging. We extend this analysis to include upper limits on companion mass in systems without imaging detections. In 25 systems, we rule out companions with masses greater than 0.2 M {sub ⊙}, suggesting that the observed RV signals are caused by late-M dwarfs or substellar (potentially planetary) objects. On the other hand, the joint RV and imaging analysis almost entirely rules out planetary explanations of the RV signal for HD 19522 and suggests that the companion must have an angular separation below a few tenths of an arcsecond. This work highlights the importance of combined RV and imaging observations for characterizing the outer regions of nearby planetary systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Ultrafast x-ray detection of low-spin iron in molten silicate under deep planetary interior conditions

The spin state of Fe can alter the key physical properties of silicate melts, affecting the early differentiation and the dynamic stability of the melts in the deep rocky planets. The low-spin state of Fe can increase the affinity of Fe for the melt over the solid phases and the electrical conductivity of melt at high pressures. However, the spin state of Fe has never been measured in dense silicate melts due to experimental challenges. We report detection of dominantly low-spin Fe in dynamically compressed olivine melt at 150 to 256 gigapascals and 3000 to 6000 kelvin using laser-driven shock wave compression combined with femtosecond x-ray diffraction and x-ray emission spectroscopy using an x-ray free electron laser. The observation of dominantly low-spin Fe supports gravitationally stable melt in the deep mantle and generation of a dynamo from the silicate melt portion of rocky planets.

58 GEOSCIENCES↗
DOE OSTI2020

The TESS-Keck Survey. III. A Stellar Obliquity Measurement of TOI-1726 c

We report the measurement of a spectroscopic transit of TOI-1726c, one of two planets transiting a G-type star with V = 6.9 in the Ursa Major Moving Group (∼400 Myr). With a precise age constraint from cluster membership, TOI-1726 provides a great opportunity to test various obliquity excitation scenarios that operate on different timescales. By modeling the Rossiter–McLaughlin (RM) effect, we derived a sky-projected obliquity of −1{sub −32}{sup +35{sup ∘}}. This result rules out a polar/retrograde orbit and is consistent with an aligned orbit for planet c. Considering the previously reported, similarly prograde RM measurement of planet b and the transiting nature of both planets, TOI-1726 tentatively conforms to the overall picture that compact multitransiting planetary systems tend to have coplanar, likely aligned orbits. TOI-1726 is also a great atmospheric target for understanding differential atmospheric loss of sub-Neptune planets (planet b 2.2 R {sub ⊕} and c 2.7 R {sub ⊕} both likely underwent photoevaporation). The coplanar geometry points to a dynamically cold history of the system that simplifies any future modeling of atmospheric escape.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Making Every Microgram Count: Nanocalorimetry for Nuclear and Ultra-Rare Materials

The thermal analysis of nuclear and ultra-rare materials plays an important role in nuclear energy, planetary, environmental, and technological settings. Heat effects associated with the sample temperature, heat capacity, phase transformation, radiation damage and crystallographic defects are some of the thermochemistry measurements made with conventional differential scanning calorimeters. However, the measurement capabilities of the of traditional DSCs are often restricted when studying limited ultra-rare accessory minerals or materials submitted to extreme conditions, such as radiation in the nuclear fuel cycle and high pressure. We investigate the usage of nanocalorimetry for the energetic analysis of nuclear or ultra-rare materials, such as irradiated materials and high-pressure phases, with an emphasis on radiation damage and heat capacity measurements. Examples of how nanocalorimetry has been previously used for phase transitions, melting, and nucleation in ultra-fast heating and cooling rates are presented. Finally, an outlook of the field and future work, including beneficial safety and environmental outcomes from the potential usage of nanocalorimetry, are shown.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Loss and Isotopic Fractionation of Alkali Elements during Diffusion-Limited Evaporation from Molten Silicate: Theory and Experiments

Moderately volatile elements (MVEs) are variably depleted in planetary bodies, reflecting the imprints of nebular and planetary processes. Among MVEs, Na, K, and Rb are excellent tracers for unraveling the history of MVE depletion in planetary bodies because they have similar geochemical behaviors but can be chemically fractionated by evaporation and condensation processes. Furthermore, K and Rb are amenable to high-precision isotopic analyses, which can help constrain the conditions of evaporation and condensation. To quantitatively understand why Na, K, and Rb are depleted in planetary bodies, we have carried out vacuum evaporation experiments from basaltic melt at 1200 and 1400 °C to study their evaporation kinetics and isotopic fractionations. We chose this composition because it is relevant to evaporation from small differentiated planetesimals. The Rb isotopic compositions of the evaporation residues were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), and the K isotopic compositions were measured along profiles across the residues by secondary ion mass spectrometry (SIMS). In the 1400 °C run products, we found that the concentrations of both K and Rb in the run products decreased from core to rim, which was accompanied by a heavy K isotope enrichment near the surface. This indicates that, in this run, evaporation was limited by diffusion. To use those data quantitatively, we derive analytical equations that describe the evaporation rate and isotopic fractionation associated with diffusion-limited evaporation from a sphere, slab, and cylinder in transient and quasi-steady state regimes. This model is used to tease out the roles that diffusive transport in the melt and evaporation at the melt/gas interface play in setting the elemental depletion and isotopic composition of the residue. Under our experimental conditions, volatility decreases in the order of Na, Rb, and K. Using our experimental results in a thermodynamic model, we have estimated the product γΓ of activity coefficients × evaporation coefficients of Na, Rb, and K. The measured isotopic compositions of the residues are well explained using Rayleigh distillations, whereby the relative volatilities of K and Rb isotopes are given by the square root of their masses. We use our results and previously published data to predict how K and Rb could have been lost as a function of temperature, melt composition, oxygen fugacity, and saturation degree relevant to Vesta’s building blocks. We find that the K and Rb depletions, K/Rb elemental fractionation, and δ 41 K and δ 87 Rb isotopic fractionations of Vesta (as sampled by howardite-eucrite-diogenite (HED) meteorites) are best explained by evaporation of submillimeter size objects for 0.1-10 years at moderate temperatures (~1050 °C) in a medium ~98.8% saturated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Machine learning and serving of discrete field theories

A method for machine learning and serving of discrete field theories in physics is developed. The learning algorithm trains a discrete field theory from a set of observational data on a spacetime lattice, and the serving algorithm uses the learned discrete field theory to predict new observations of the field for new boundary and initial conditions. The approach of learning discrete field theories overcomes the difficulties associated with learning continuous theories by artificial intelligence. The serving algorithm of discrete field theories belongs to the family of structure-preserving geometric algorithms, which have been proven to be superior to the conventional algorithms based on discretization of differential equations. The effectiveness of the method and algorithms developed is demonstrated using the examples of nonlinear oscillations and the Kepler problem. In particular, the learning algorithm learns a discrete field theory from a set of data of planetary orbits similar to what Kepler inherited from Tycho Brahe in 1601, and the serving algorithm correctly predicts other planetary orbits, including parabolic and hyperbolic escaping orbits, of the solar system without learning or knowing Newton’s laws of motion and universal gravitation. The proposed algorithms are expected to be applicable when the effects of special relativity and general relativity are important.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Exogeological inferences from white dwarf pollutants: the impact of stellar physics

Many white dwarfs have accreted material from their own planetary systems. These objects can be used to infer the composition of exoplanetary material and identify evidence for key geological processes. However, the white dwarf atmospheric physics distorts the inferred material composition away from the true composition, mainly through differential atomic diffusion of the accreted metals. Correcting for this effect is essential, but is dependent on various physical assumptions associated with the white dwarf itself. We first focus on the effect of assumptions related to convective overshoot and thermohaline mixing on the atomic diffusion time-scales. For white dwarfs with H-dominated atmospheres between 12000 K and 18000 K⁠, we find that including a complete treatment of convective overshoot decreases the inferred Fe and O abundances in accreted material. For these white dwarfs, we also find that including thermohaline mixing decreases Fe and O abundances. For He-dominated systems, the effect of convective overshoot is comparatively minor. We then explore the overall effect of other physical assumptions by comparing publicly available grids of diffusion time-scales. We find that the choice of model grid can have a large impact for white dwarfs with He-dominated atmospheres, notably on the inferred core to mantle ratio of accreted material. We identify several systems for which the geological interpretation is robust against these systematics. We also present a ‘discrepancy metric’ which can be used to estimate the potential impact of changing the stellar physics without requiring detailed modelling.

Astronomy and AstroPhysics↗
DOE OSTI2024

A physics-based ensemble machine-learning approach to identifying a relationship between lightning indices and binary lightning hazard

To convert lightning indices generated by numerical weather prediction experiments into binary lightning hazard, a machine-learning tool was developed. This tool, consisting of parallel multilayer perceptron classifiers, was trained on an ensemble of planetary boundary layer schemes and microphysics parameterizations that generated four different lightning indices over 1 week. In a subsequent week, the multi-physics ensemble was applied and the machine-learning tool was used to evaluate the accuracy. Unintuitively, the machine-learning tool performed better on the testing dataset than the training dataset. Much of the error may be attributed to mischaracterizing the convection. The combination of the machine learning model and simulations could not differentiate between cloud-to-cloud lightning and cloud-to-ground lightning, despite being trained on cloud-to-ground lightning. It was found that the simulation most representative of the local operational model was the most accurate simulation tested.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Ground-based temperature and humidity profiling: combining active and passive remote sensors

Abstract. Thermodynamic profiles in the planetary boundary layer (PBL) are important observations for a range of atmospheric research and operational needs. These profiles can be retrieved from passively sensed spectral infrared (IR) or microwave (MW) radiance observations or can be more directly measured by active remote sensors such as water vapor differential absorption lidars (DIALs). This paper explores the synergy of combining ground-based IR, MW, and DIAL observations using an optimal-estimation retrieval framework, quantifying the reduction in the uncertainty in the retrieved profiles and the increase in information content as additional observations are added to IR-only and MW-only retrievals. This study uses ground-based observations collected during the Perdigão field campaign in central Portugal in 2017 and during the DIAL demonstration campaign at the Atmospheric Radiation Measurement Southern Great Plains site in 2017. The results show that the information content in both temperature and water vapor is higher for the IR instrument relative to the MW instrument (thereby resulting in smaller uncertainties) and that the combined IR + MW retrieval is very similar to the IR-only retrieval below 1.5 km. However, including the partial profile of water vapor observed by the DIAL increases the information content in the combined IR + DIAL and MW + DIAL water vapor retrievals substantially, with the exact impact vertically depending on the characteristics of the DIAL instrument itself. Furthermore, there is a slight increase in the information content in the retrieved temperature profile using the IR + DIAL relative to the IR-only; this was not observed in the MW + DIAL retrieval.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dust-planetary boundary layer interactions amplified by entrainment and advections

Mineral dust contributes to more than half of the global aerosol loading. However, the radiative impacts of dust aerosols on planetary boundary layer (PBL) structure have not been explored sufficiently. During a typical dust storm event over Tarim Basin, dust aerosols exhibit a well-mixed distribution during the daytime in spite of a shallow layer of dust particles accumulated at higher altitudes. By contrast, nocturnal dust plumes are located near the surface due to stable stratification. We demonstrate that these differentiated vertical distributions determine the spatial heterogeneity of dust loading, radiative fluxes and PBL height variations. Dust aerosols cause daytime PBL suppression and nighttime PBL promotion through modulating surface and atmospheric radiative budgets. Specifically, dust-induced cooling effect within PBL directly inhibits the daytime PBL development. PBL suppression effect is then amplified by entrainment processes resulting in excessively low PBL height, especially for dust particles below but near the PBL top. Dust plumes weaken updrafts from PBL and downdrafts of the free atmosphere, which further reduce the entrainment mixing through attenuating horizontal and vertical advection, and eventually amplify PBL suppression. At night, near-surface dust aerosols stimulate a warm and unstable lower atmosphere, generate warm advection heating and promote the PBL development. Our study highlights the importance of specifying entrainment parameters and nighttime advection activities in quantifying the dust-PBL interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Strength, plasticity, and spin transition of Fe-N compounds in planetary cores

Elastic and plastic properties of Fe-light element alloys and compounds are needed to determine the compositions and dynamics of planetary cores. Elastic strength and plastic deformation mechanisms and their relationship to electronic properties of ε-Fe 7 N 3 and γ’-Fe 4 N mixture were investigated by x-ray diffraction and x-ray emission spectroscopy in the diamond anvil cell from 1 bar up to 60 GPa. X-ray diffraction shows that ε-Fe 7 N 3 reaches a pressure of 15–20 GPa before undergoing bulk plasticity at a differential stress of 4.4–10.4 GPa. ε-Fe 7 N 3 is stronger than γ’-Fe 4 N and hcp-Fe which achieve a flow stress of 1.5–3.6 GPa at 10–15 GPa and 2–3 GPa at ~20 GPa, respectively. X-ray emission spectroscopy shows that a decrease in electronic spin moment begins before and completes after plastic flow onset for each nitride, suggesting that pressure-driven changes in electronic arrangement do not trigger a plastic response although they may modify the strength and plastic behavior of Fe-N compounds. Plastic deformation in ε-Fe 7 N 3 and hcp-Fe results in a preferred orientation of (0001) normal to maximum compression, while γ’-Fe 4 N develops a maximum in the (110). Furthermore, these observations may be combined with measurements of elasticity to model seismic properties of cores of small planetary bodies such as Mars, Mercury, and the Moon.

58 GEOSCIENCES↗
DOE OSTI2022

Global distribution, formation and fate of mineral‐associated soil organic matter under a changing climate: A trait‐based perspective

Abstract Soil organic matter (SOM) is the largest actively cycling reservoir of terrestrial carbon (C), and the majority of SOM in Earth's mineral soils (~65%) is mineral‐associated organic matter (MAOM). Thus, the formation and fate of MAOM can exert substantial influence on the global C cycle. To predict future changes to Earth's climate, it is critical to mechanistically understand the processes by which MAOM is formed and decomposed, and to accurately represent this process‐based understanding in biogeochemical and Earth system models. In this review, we use a trait‐based framework to synthesize the interacting roles of plants, soil micro‐organisms, and the mineral matrix in regulating MAOM formation and decomposition. Our proposed framework differentiates between plant and microbial traits that influence total OM inputs to the soil (‘feedstock traits’) versus traits that influence the proportion of OM inputs that are ultimately incorporated into MAOM (‘MAOM formation traits’). We discuss how these feedstock and MAOM formation traits may be altered by warming, altered precipitation and elevated carbon dioxide. At a planetary scale, these feedstock and MAOM formation traits help shape the distribution of MAOM across Earth's biomes, and modulate biome‐specific responses of MAOM to climate change. We leverage a global synthesis of MAOM measurements to provide estimates of the total amount of MAOM‐C globally (~840–1540 Pg C; 34%–51% of total terrestrial organic C), and its distribution across Earth's biomes. We show that MAOM‐C concentration is highest in temperate forests and grasslands, and lowest in shrublands and savannas. Grasslands and croplands have the highest proportion of soil organic carbon (SOC) in the MAOM fraction (i.e. the MAOM‐C:SOC ratio), while boreal forests and tundra have the lowest MAOM‐C:SOC ratio. Drawing on our trait framework, we then review experimental data and posit the effects of climate change on MAOM pools in different biomes. We conclude by discussing how MAOM is integrated into soil C models, and how feedstock and MAOM formation traits may be included in these models. We also summarize the projected fate of MAOM under climate change scenarios (Representative Concentration Pathways 4.5 and 8.5) and discuss key model uncertainties. Read the free Plain Language Summary for this article on the Journal blog.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Boundary-Layer-Coupled and Decoupled Clouds in Global Storm-Resolving Models: Comparisons With the ARM Observations

The accurate representation of interactions between clouds and planetary boundary layer (PBL) is a persistent challenge in climate models, critical for simulating surface energy budget. The emergence of kilometer-grid-scale global storm resolving models (GSRMs) offers the potential for enhanced details of PBL processes in these complex interactions. This study evaluates the representation of PBL-coupled and decoupled clouds in nine GSRM simulations against extensive ground-based observations by the Department of Energy Atmospheric Radiation Measurement (ARM) program, across six sites encompassing diverse regimes such as marine and continental environments in tropics and midlatitude. By differentiating coupling based on the relative positions between cloud bases and PBL tops, our analysis focuses on the simulation of PBL height, cloud frequency, position and vertical extent. The GSRMs generally exhibit commendable agreements with observed cloud structures and PBL diurnal cycles across different ARM sites. In contrast to the relatively consistent representation of decoupled clouds, discrepancies exist between the simulated and the observed coupled clouds, particularly in areas of intense convection, for example, over tropical rainforests and mountainous regions. These biases are probably associated with the models' tendency to underestimate the boundary layer humidity and the frequency of coupled clouds within different ranges of PBL heights. This study underscores the importance for continuous improvements in the representation of boundary layer and convection within these global kilometer-grid-scale models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Regularization via f -Divergence: An Application to Multi-Oxide Spectroscopic Analysis

In this paper, we explore the application of convolutional neural networks (CNNs) for predicting the chemical composition of complex geologic samples in a simulated Martian atmospheric environment. Specifically, we aim to characterize oxide weight percentages (wt.%) of rock samples analyzed by remote Laser-Induced Breakdown Spectroscopy (LIBS), framing the problem as a multi-target regression task . Neural networks trained on LIBS spectra are prone to overfitting due to high spectral complexity, limited labeled data, and measurement noise. While regularization is critical for improving generalization, common methods (e.g., ℓ 2 regularization) impose constraints not directly tied to data distribution properties. We propose a novel regularization method based on a specific ƒ-divergence induced by a graph-based estimator, designed to constrain the distributional discrepancy between predictions and targets. This regularizer serves a dual purpose: (a) mitigating overfitting by enforcing a constraint on the distributional difference between predictions and noisy targets, and (b) acting as an auxiliary loss that penalizes large divergences. To enable backpropagation, we develop a differentiable approximation of this particular ƒ-divergence, making the method feasible for neural networks. Experiments on ChemCam and SuperCam LIBS calibration spectra show that mathematical equation-divergence regularization outperforms or matches standard regularization methods (ℓ 1 , ℓ 2 , dropout) and the classical baseline, partial least squares (PLS). Combining ƒ-divergence regularization with standard regularization yields further performance gains, indicating that distributional regularization is useful in this context giving a promising direction for robust model training in planetary science applications. Source code is publicly available at Klein and Li (2025), https://doi.org/10.11578/dc.20250530.7.

58 GEOSCIENCES↗
DOE OSTI2026

Remote sensing of planetary boundary layer from ground and space: Structure, thermodynamics, and boundary layer clouds

The planetary boundary layer (PBL) is a critical interface between Earth's surface and atmosphere, influencing atmospheric convection, weather patterns, and air quality. Recognized by the 2017 National Academies of Sciences, Engineering, and Medicine Earth Science Decadal Survey as an Incubation Targeted Observable, high-quality and effective observation of the PBL has become a priority. This paper reviews surface-based and satellite remote sensing techniques for characterizing PBL features, including PBL height (PBLH), boundary layer thermodynamics, turbulence, and boundary layer clouds (BLCs). These elements are treated as interconnected aspects of the PBL system, while recognizing that different instruments retrieve different physical manifestations of the PBL. The review summarizes recent advances and limitations in Micro-Pulse Lidar (MPL), Doppler lidar, Raman lidar, Differential Absorption Lidar (DIAL), ceilometers, wind profilers, GNSS Radio Occultation, radar, and hyperspectral sounders. These observations help trace dynamic processes within the PBL and link PBL structure to broader weather and climate processes. The review also highlights persistent observational gaps over oceans, remote land, and polar regions, where continuous surface-based profiling is sparse. By comparing instrument capabilities, practical limitations, and interpretation issues, this review emphasizes the need for integrated remote sensing approaches and careful definition of the retrieved PBL quantities.

Boundary layer clouds↗
DOE OSTI2020

Glass transition temperature studies of planetary ball milled glasses: Accessing the rapidly cooled glassy state in Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 7, Oxy-thio phosphate glasses

This paper details the very first in-depth study of the glass transition temperature (T g ) for planetary balled milled (PBM) Na 4 P 2 S 7-x O x (NaPSO), where 0 ≤ x ≤ 7, glasses. For 0 ≤ x ≤ 5, fully amorphous, homogeneous, and chemically reacted compositions can be prepared. For samples with 5 < x ≤ 7, partially amorphous but fully chemically reacted glass-ceramics can be produced. The reproducible, thermally cyclable onset T g and the onset crystallization temperature, T c , were investigated as a function of the composition and of the short-range order (SRO) structures of the glasses. Additionally, we examined the extreme sub-T g exothermic relaxations present due to the high energy milling processing and correspondingly high effective quenching rate. Using a differential scanning calorimeter (DSC) and scanning from well below the onset T g , the glasses are observed to relax exothermally below T g . The integrated relaxation enthalpy, ΔH rel , is ~ 0 for the x = 2 glass, but is significantly exothermic for lower and higher values of x. Once the high fictive state of these glasses has been erased by scanning to above the T g , but below the T c of the glass, the DSC scans of the glasses recover normal behavior for a normally cooled glass without any relaxation exotherm. The T g s of these glasses remain relatively constant for 0 ≤ x ≤ 3, but for glasses with 3 < x ≤ 5, T g increases sharply following the combined effects of the phosphate chain length increasing caused by the formation of bridging oxygens and the increasing concentration of more charge dense non-bridging oxygens (NBOs). For x > 5, both T g and Tc decrease sharply, becoming nearly identical at x = 7 where glass formation essentially ceases. For smaller values of x, T c increases with both chain length and the structural complexity of the composition but decreases sharply for glass-ceramics of x > 5.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the Geometry of the Near-core Magnetic Field in Massive Stars

It is well-known that the cores of massive stars sustain a stellar dynamo with a complex magnetic field configuration. However, the same cannot be said for the field's strength and geometry at the convective–radiative boundary, which are crucial when performing asteroseismic inference. In this Letter, we present 3D magnetohydrodynamic (MHD) simulations of a 7 M ⊙ mid-main-sequence star, with particular attention given to the convective–radiative boundary in the near-core region. Our simulations reveal that the toroidal magnetic field is significantly stronger than the poloidal field in this region, contrary to recent assumptions. Moreover, the rotational shear layer, also important for asteroseismic inference, is specifically confined within the extent of the Brunt–Väisälä frequency peak. These results, which are based on the inferred properties of HD 43317, have widespread implications for asteroseismic studies of rotation, mixing, and magnetism in stars. While we expect our results to be broadly applicable across stars with similar Brunt–Väisälä frequency profiles and stellar masses, we also expect the MHD parameters (e.g., Re m ) and the initial stellar rotation rate to impact the geometry of the field and differential rotation at the convective–radiative interface.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

TOI-220 b : a warm sub-Neptune discovered by TESS

ABSTRACT In this paper, we report the discovery of TOI-220 b, a new sub-Neptune detected by the Transiting Exoplanet Survey Satellite (TESS) and confirmed by radial velocity follow-up observations with the HARPS spectrograph. Based on the combined analysis of TESS transit photometry and high precision radial velocity measurements, we estimate a planetary mass of 13.8 ± 1.0 M⊕ and radius of 3.03 ± 0.15 R⊕, implying a bulk density of 2.73 ± 0.47 $\rm {g\,cm}^{-3}$. TOI-220 b orbits a relative bright (V= 10.4) and old (10.1 ± 1.4 Gyr) K dwarf star with a period of ∼10.69 d. Thus, TOI-220 b is a new warm sub-Neptune with very precise mass and radius determinations. A Bayesian analysis of the TOI-220 b internal structure indicates that due to the strong irradiation it receives, the low density of this planet could be explained with a steam atmosphere in radiative–convective equilibrium and a supercritical water layer on top of a differentiated interior made of a silicate mantle and a small iron core.

Hoyer, S.↗