Search NASA⌕ Search

SEARCH · Search NASA

Results for “Product selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Influence of CO 2 -Regenerative Film Properties in Enhancing C 2+ Products Selectivity While Mitigating CO 2 Crossover

Zero-gap anion-exchange membrane electrode assembly (AEMEA) electrolyzers operating in alkaline media face challenges such as CO 2 crossover and salting-out. The bipolar membrane electrode assembly (BPMEA) electrolyzer, using DI water as the electrolyte, addresses both CO 2 crossover and salting-out issues. As cations, which are crucial in stabilizing the CO 2 R intermediates, are absent in the electrolyte, cations embedded in the AEM play an important role in dictating the CO 2 R selectivity and activity in BPMEA systems. So far, no systematic study has been conducted on the influence of cations embedded in AEMs on CO 2 selectivity and activity in BPMEA systems. Moreover, BPMEA systems impose an additional challenge: low stability due to delamination of the bipolar membrane caused by CO 2 regeneration at the membrane-membrane interface. To enhance the stability of the electrolyzer, a simple yet highly reproducible strategy for coating a porous CO 2 regenerative film on smooth Nafion 117 is demonstrated in this work, along with a systematic study of four different commercially available AEMs, composed of different cations and cation densities, for use in combination with Nafion 117 and copper catalyst at the cathode. We found that the PiperION membrane delivers selectivity and activity comparable to those of alkali-metal cations, owing to the enhanced local electric field resulting from the combined effects of a high positive charge on the N atom of the piperidinium cation and the high ion-exchange capacity. Further, we studied the influence of the thickness of the PiperION porous layer over Nafion 117 on CO 2 R selectivity and found that 70 μm is the minimum thickness to achieve maximum C 2+ products selectivity, reduced the CO 2 crossover to 5% from 25% at 4 SCCM and 150 mA cm –2 , and was stable for operation beyond 100 h. The selectivity of this system, compared with AEMEA, and stability outperformed both AEMEA and BPMEA. This study helps design more effective BPMs to inhibit CO 2 crossover while enabling stable and selective electrochemical CO 2 reduction to C 2+ hydrocarbons.

Cations↗

Ongoing characterization of the forced electron beam induced arc discharge ion source for the selective production of exotic species facility

An intense research and development activity to finalize the design of the target ion source system for the selective production of exotic species (SPES) facility (operating according to the isotope separation on line technique) is at present ongoing at Legnaro National Laboratories. In particular, the characterization of ion sources in terms of ionization efficiency and transversal emittance is currently in progress, and a preliminary set of data is already available. In this work, the off-line ionization efficiency and emittance measurements for the SPES forced electron beam induced arc discharge ion source in the case of a stable Ar beam are presented in detail.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CO 2 Hydrogenation over Oxide‐Supported PtCo Catalysts: The Role of the Oxide Support in Determining the Product Selectivity

Abstract By simply changing the oxide support, the selectivity of a metal–oxide catalysts can be tuned. For the CO 2 hydrogenation over PtCo bimetallic catalysts supported on different reducible oxides (CeO 2 , ZrO 2 , and TiO 2 ), replacing a TiO 2 support by CeO 2 or ZrO 2 selectively strengthens the binding of C,O‐bound and O‐bound species at the PtCo–oxide interface, leading to a different product selectivity. These results reveal mechanistic insights into how the catalytic performance of metal–oxide catalysts can be fine‐tuned.

Kattel, Shyam↗

Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites

Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C 3 and linear C 4 –C 7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.

accessibility↗

CO 2 hydrogenation over oxide-supported PtCo catalysts: The role of the oxide support in determining the product selectivity

By simply changing the oxide support, the selectivity of a metal–oxide catalysts can be tuned. For the CO 2 hydrogenation over PtCo bimetallic catalysts supported on different reducible oxides (CeO 2 , ZrO 2 , and TiO 2 ), replacing a TiO 2 support by CeO 2 or ZrO 2 selectively strengthens the binding of C,O-bound and O-bound species at the PtCo–oxide interface, leading to a different product selectivity. Lastly, these results reveal mechanistic insights into how the catalytic performance of metal–oxide catalysts can be fine-tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb 2 O 5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7–C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that the Nb 2 O 5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic–OH bonds in phenolics is significantly reduced upon adsorption on Nb 2 O 5 , resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability.

36 MATERIALS SCIENCE↗

Pyrolysis of Phenethyl Phenyl Ether Tethered in Mesoporous Silica. Effects of Confinement and Surface Spacer Molecules on Product Selectivity

There has been expanding interest in exploring porous metal oxides as a confining environment for organic molecules resulting in altered chemical and physical properties including chemical transformations. In this paper, we examine the pyrolysis behavior of phenethyl phenyl ether (PPE) confined in mesoporous silica by covalent tethers to the pore walls as a function of tether density and the presence of co-tethered surface spacer molecules of varying structure (biphenyl, naphthyl, octyl, and hexadecyl). The PPE pyrolysis product selectivity, which is determined by two competitive free-radical pathways cycling through the two aliphatic radical intermediates (PhCH CH2OPh and PhCH2CH OPh), is shown to be dramatically different from that measured in the liquid phase as well as for PPE tethered to the exterior surface of nonporous silica nanoparticles. Tailoring the pore surface with spacer molecules further alters the selectivity such that the PPE reaction channel involving a molecular rearrangement (O-C phenyl shift in PhCH2CH OPh), which accounts for 25 % of the products in the liquid phase, can be virtually eliminated under pore confinement conditions. The origin of this change in selectivity is discussed in the context of steric constraints on the rearrangement path, confinement effects, pore surface curvature, and hydrogen bonding of PPE with residual surface silanols supplemented by nitrogen physisorption data and molecular dynamics simulations.

Kidder, Michelle↗

Controlling Product Selectivity in Photochemical CO 2 Reduction with the Redox Potential of the Photosensitizer

The ability to selectively reduce CO 2 to a particular product or mixture of products is expected to play a key role in mitigation strategies aiming to alleviate the devastating impact of this greenhouse gas in our climate and oceans. Among those, the production of liquid solar fuels from CO 2 and H 2 O will likely need cascade strategies involving multiple catalysts carrying out different functions. This will require that the catalysts doing the initial CO 2 reduction steps deliver the right product or products to downstream catalysts. CO, H 2 and formate are the most common products in CO 2 reduction by molecular catalysts. Here, in this work, we demonstrate control over the selectivity of C 1 products in photochemical CO 2 reduction with the same catalyst, simply by changing the redox potential of the photosensitizer and/or the water concentration. Turnover numbers for CO generation with one of the photosensitizers under anhydrous conditions reached 85,000, one of the largest values reported to date. A combination of experimental results and DFT calculations show that control of the selectivity is achieved, in part, due to the interplay between regimes under kinetic or thermodynamic control. These regimes are largely dictated by the proton sources and the CO 2 reduction byproducts generated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification and characterization of substrate- and product-selective nylon hydrolases

Enzymes can rapidly and selectively hydrolyze diverse natural and anthropogenic polymers, but few have been shown to hydrolyze synthetic polyamides. Here, in this work, we synthesized and characterized a panel of 95 enzymes from the N-terminal nucleophile hydrolase superfamily with 30%–50% pairwise amino acid identity. We found that nearly 40% of the enzymes had substantial nylon hydrolase activity, but there was no relationship between phylogeny and activity, nor any evidence of prior evolutionary selection for nylon hydrolysis. Several newly identified hydrolases showed substrate selectivity, generating up to 20-fold higher product titers with nylon-6,6 versus nylon-6. However, the yield was still less than 1%, necessitating further optimization before potential applications. Finally, we determined the crystal structure and oligomerization state of a nylon-6,6-selective hydrolase to elucidate structural factors that could affect activity and selectivity. These new enzymes provide insights into nylon hydrolase evolution and opportunities for analysis and engineering of improved hydrolases.

nylon↗

CO2 Reduction on Supported Ru/Al2O3 Catalysts: Cluster Size Dependence of Product Selectivity

The catalytic performance of a series of Ru/Al2O3 catalysts with Ru content in the 0.1-5% range was examined in the reduction of CO2 with H2. At low Ru loadings (≤0.5 %) where the active metal phase is highly dispersed (mostly atomically) on the alumina support CO is formed with high selectivity. With increasing metal loading the selectivity toward CH4 formation increases, while that for CO production decreases. In the 0.1% Ru/Al2O3 catalyst Ru is mostly present in atomic dispersion as STEM images obtained from the fresh sample prior to catalytic testing reveal. STEM images recorded form this same sample following temperature programmed reaction test clearly show the agglomeration of small metal particles (and atoms) into 3D clusters. The clustering of the highly dispersed metal phase is responsible for the observed dramatic selectivity change during elevated temperature tests: dramatic decrease in CO, and large increase in CH4 selectivity. Apparent activation energies, estimated from the slopes of Arrhenius plots, of 82 kJ/mol and 62 kJ/mol for CO and CH4 formation were determined, respectively, regardless of Ru loading. These results suggest that the formation of CO and CH4 follow different reaction pathways, or proceed on active centers of different nature. Reactions with CO2/H2 and CO/H2 mixtures (under otherwise identical reaction conditions) reveal that the onset temperature of CO2 reduction is about 150 ºC lower than of CO reduction. We thank Dr. Feng Gao for carrying out the H2 chemisorption measurements on all the Ru/Al2O3 catalysts discussed in this work. The catalyst preparation and catalytic measurements were supported by a Laboratory Directed Research and Development (LDRD) project, while the TEM work was supported by the Chemical Imaging Initiative at the Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US Department of Energy by Battelle under contract number DE-AC05-76RL01830. JHK also acknowledges the support of this work by the 2013 Research Fund of UNIST (Ulsan National Institute of Science and Technology, Ulsan, Korea).

CO/CH4 selectivity↗

Aqueous Phase Glycerol Reforming by PtMo Bimetallic Nano-Particle Catalyst: Product Selectivity and Structural Characterization

A carbon supported PtMo aqueous phase reforming catalyst for producing hydrogen from glycerol was characterized by analysis of the reaction products and pathway, TEM, XPS and XAS spectroscopy. Operando X-ray absorption spectroscopy (XAS) indicates the catalyst consists of bimetallic nano-particles with a Pt rich core and a Mo rich surface. XAS of adsorbed CO indicates that approximately 25% of the surface atoms are Pt. X-ray photoelectron spectroscopy indicates that there is unreduced and partially reduced Mo oxide (MoO{sub 3} and MoO{sub 2}), and Pt-rich PtMo bimetallic nano-particles. The average size measured by transmission electron microscopy of the fresh PtMo nano-particles is about 2 nm, which increases in size to 5 nm after 30 days of glycerol reforming at 31 bar and 503 K. The catalyst structure differs from the most energetically stable structure predicted by density functional theory (DFT) calculations for metallic Pt and Mo atoms. However, DFT indicates that for nano-particles composed of metallic Pt and Mo oxide, the Mo oxide is at the particle surface. Subsequent reduction would lead to the experimentally observed structure. The aqueous phase reforming reaction products and intermediates are consistent with both C-C and C-OH bond cleavage to generate H{sub 2}/CO{sub 2} or the side product CH{sub 4}. While the H{sub 2} selectivity at low conversion is about 75%, cleavage of C-OH bonds leads to liquid products with saturated carbon atoms. At high conversions (to gas), these will produced additional CH{sub 4} reducing the H{sub 2} yield and selectivity.

08 HYDROGEN↗

Challenges in Product Selectivity for Electrocatalytic Reduction of Amine-Captured CO 2 : Implications for Reactive Carbon Capture

CO 2 is a potential feedstock for carbon-based fuels or materials, but is only available in dilute streams. Integrated processes for CO 2 capture and conversion directly valorize the CO 2 captured by sorbent materials, skipping the energetically expensive sorbent regeneration step. Amines are the most heavily studied liquid-phase sorbent materials for CO 2 capture from dilute streams. Amines react with CO 2 in a 2:1 ratio to form the corresponding ammonium carbamate. Ammonium carbamate [NH 4 ][H 2 NCO 2 ] was tested as the substrate using the highly selective and robust CO 2 -to-formate reduction electrocatalyst [( tBu POCOP)Ir(H)(NCCH 3 ) 2 ], where ( tBu POCOP) is the tridentate pincer ligand 2,6-bis(di tert -butyl-phosphonito). When ammonium carbamate was used as the substrate instead of CO 2 , only hydrogen was produced. An equivalent electrolysis with ammonium hexafluorophosphate with CO 2 also resulted in primarily hydrogen. Methyl carbamate and urea were also tested as substrates as proxies for carbamate that do not contain an equivalent of ammonium, and there was also negligible reduction to carbon-based products. These results indicate that the loss of selectivity observed for aminecaptured CO 2 , or ammonium carbamate, is likely due to the generation of the acidic ammonium equivalent as well as the greater challenge of reducing carbamate compared to CO 2 . This study illustrates that catalysts with high selectivity for concentrated CO 2 can favor hydrogen evolution and loss of carbon-based products when amine-captured CO 2 is used instead.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure sensitivity and its effect on methane turnover and carbon co-product selectivity in thermocatalytic decomposition of methane over supported Ni catalysts

We explore how thermocatalytic decomposition of methane (TCD) is a promising approach for producing CO 2 -free hydrogen and solid carbon co-product. In this study, a series of Al 2 O 3 - and MgAl 2 O 4 -based Ni catalysts, prepared with varying synthesis and pretreatment methods, were evaluated for methane TCD performance at 650°C and characterized before and after reaction to elucidate activity-structure relationships. We found that methane TCD turnover increases with Ni particle size. Further, large Ni particle sizes (i.e., >20 nm) are selective toward the formation of carbon nanotubes (CNTs), while small Ni particle sizes (i.e., <10 nm) are selective toward the formation of graphitic carbon layers. The formation of graphitic carbon layers block access to Ni active sites, thus rendering the catalyst inactive more quickly than when CNTs are produced. Additionally, the catalyst deactivation observed with time-on-stream is due to the fragmentation of Ni particles into smaller Ni particles followed by their encapsulation with graphitic carbon layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi-inclusive Neutral Current Neutral Pion Production Selection at the NOvA (NuMI Off-axis Electron Neutrino Appearance) Near Detector Using Prong Level Convolutional Neural Networks

The NONA neutrino experiment based in Fermilab is designed to measure ν µ →ν e neutrino oscillations. This experiment will give us insight into the properties of massive neutrinos. Neutral current (NC) ν µ,e neutral pion production events can mimic the ν µ →ν e oscillation signal and therefore are an important background for NONA to understand. Neutral pions decay into two photons which can fake a single electron shower (νe appearance signal) in two ways: either the 2 photons can merge together or one of them may escape detection. In order to constrain this background, NONA utilizes the Near Detector to measure neutral current π 0 neutrino interactions. In this analysis, neutrino-Nucleus (ν µ →N) NC π 0 interactions with total pion energy greater then 0.3 GeV are studied by selecting two prong events with two final state photons as determined by prong based Convolutional Visual Networks (CVN). The analysis is performed on 3.54x10 21 Protons On Target (POT) of NONA Near Detector simulated data and compared to 8.09x10 20 POT of data. Optimization of the selection based on fractional cross-section uncertainty and an initial energy resolution study of the final sample are presented. The final 2 prong selection using prong based CVN gave a purity of 74%, selection efficiency of ~ 1.8%, and an expected (NC) ν µ,e neutral pion cross section of ~ 15.2%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗