Search NASA⌕ Search

SEARCH · Search NASA

Results for “Production rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Simulations of 7 Be and 10 Be with the GEOS-Chem global model v14.0.2 using state-of-the-art production rates

The cosmogenic radionuclides 7 Be and 10 Be are useful aerosol tracers for atmospheric transport studies. Combining 7 Be and 10 Be measurements with an atmospheric transport model can not only improve our understanding of the radionuclide transport and deposition processes but also provide an evaluation of the transport process in the model. To simulate these aerosol tracers, it is critical to evaluate the influence of radionuclides production uncertainties on simulations. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate 7 Be and 10 Be with different production scenarios: the default production rate in GEOS-Chem based on an empirical approach (Lal and Peters, 1967; denoted as LP67), and two production rates from the CRAC:Be (Cosmic Ray Atmospheric Cascade: Beryllium; Poluianov et al., 2016) model considering only geomagnetic cut-off rigidities for a geocentric axial dipole (denoted as P16) or realistic spatial geomagnetic cut-off rigidity variations due to non-dipole moments of the geomagnetic field (denoted as P16spa). The model results are comprehensively evaluated with a large number of measurements including surface air concentrations and deposition fluxes. The model with the P16spa production can reproduce the absolute values and temporal variability of 7 Be and 10 Be surface concentrations and deposition fluxes on annual and sub-annual scales, as well as the vertical profiles of air concentrations. Simulations with the LP67 production tend to overestimate the absolute values of 7 Be and 10 Be concentrations. The P16 simulations suggest less than 10% differences compared to P16spa but tend to produce a significant positive bias (>20%) in the 7 Be deposition fluxes over East Asia. We find that the deposition fluxes are more sensitive to the production in the troposphere and downward transport from the stratosphere. Independent of the production models, surface air concentrations and deposition fluxes from all simulations show similar seasonal variations, suggesting a dominant meteorological influence. The model can also simulate reasonably the stratosphere-troposphere exchange process of 7 Be and 10 Be by producing stratospheric contribution and 10 Be/ 7 Be ratio values that agree with measurements. Finally, we illustrate the importance of including the time-varying solar modulation in the production calculation, which can significantly improve the agreement between model results and measurements, especially at mid- and high- latitudes. Reduced uncertainties in the production rates, as demonstrated in this study, improve the utility of 7 Be and 10 Be as aerosol tracers for evaluating and testing transport and scavenging processes in global models.

Minjie Zheng↗

The infrared light curve of Periodic Comet Halley 1986 III and its relationship to the visual light curve, C2, and water production rates

The near-IR light curve of Periodic Comet Halley 1986 III is analyzed and compared with C2 production, water production, and the visual light curve. This is the most complete IR light curve compiled to date for any comet. The scattering phase function at small sun-comet-earth angles is shown to affect the slope of near-IR light curve significantly. P/Halley's dust production, as inferred from the IR light curve showed an increased production rate near perihelion which appears to be correlated with the onset of significant jet activity. The near-IR light curve, visual light curve, C2, and water production rates displayed different heliocentric variations, suggesting that one parameter cannot be accurately estimated from another. This is particularly true of the early preperihelion visual light curve. A peak of 0.3-0.5 magnitude in the visual magnitude, representing the integrated brightness of the comet's visible coma, lagged the other parameters by about a day. The near-IR color, J-H, was less red during periods of strong dust activity.

Morris, Charles S.↗

Be-10 and Al-26 contents of eucrites - Implications for production rates and exposure ages

This paper presents the Be-10 contents of 20 and the Al-26 contents of nine eucrites. Most have Be-10 production rates between 16 and 26 dpm/kg. The average value of 21.8 dpm/kg agrees to within 10 percent with the value expected and does not support the suggestion that the eucrites received an unusually low flux of cosmic rays during the last few million years. Measured Be-10 and Al-26 contents are consistent with semiempirical calculations of nuclear production rates. The Al-26 contents provide a basis for computing shielding-corrected Ar-38 exposure ages of eucrites which show little evidence for clustering. Relatively more eucrites than diogenites are younger than 20 Ma.

Aylmer, D.↗

Atomic hydrogen production rates for comet P/Halley from observations with Dynamics Explorer I

Newly analyzed observations of the Dynamics Explorer I (DE1), launched on August 3, 1981, were used to determine the hydrogen production rate for Comet Halley at heliocentric distances, r, less than about 1.5 AU from measurements of the total Lyman-alpha flux at earth due to the cometary neutral hydrogen distribution. The production rates, determined as a function of r, were found to be consistent with in situ measurements from the Giotto and Vega spacecraft. The calculated rates are also consistent with remote observations using two sounding rockets and with the Pioneer-Venus and IUE spacecraft.

Craven, J. D.↗

Quantifying VOC-Reaction Tracers, Ozone Production, and Continuing Aerosol Production Rates in Urban and Far-Downwind Atmospheres

We have found a surprisingly informative decomposition of the complex question of smoggy ozone production (basically, [HO2] in a more locally determined field of [NO]) in the process of linked investigations of modestly smoggy Eastern North America (by NASA aircraft, July 2004) and rather polluted Flushing, NYC (Queens College, July, 2001). In both rural and very polluted situations, we find that a simple contour graph parameterization of the local principal ozone production rate can be estimated using only the variables [NO] and j(sub rads) [HCHO]: Po(O3) = c (j(sub rads) [HCHO])(sup a) [HCHO](sup b). Here j(sub rads) is the photolysis of HCHO to radicals, presumably capturing many harder-UV photolytic processes and the principle ozone production is that due to HO2; mechanisms suggest that ozone production due to RO2 is closely correlated, often suggesting a limited range of different proportionality factors. The method immediately suggests a local interpretation for concepts of VOC limitation and NOx limitation. We believe that the product j(sub rads) [HCHO] guages the oxidation rate of observed VOC mixtures in a way that also provides [HO2] useful for the principle ozone production rate k [HO2] [NO], and indeed, all ozone chemical production. The success of the method suggests that dominant urban primary-HCHO sources may transition to secondary plume-HCHO sources in a convenient way. Are there other, simple, near-terminal oxidized VOC's which help guage ozone production and aerosol particle formation? Regarding particles, we report on, to the extent NASA Research resources allow, on appealing relationships between far-downwind (Atlantic PBL) HCHO and very fine aerosol (including sulfate. Since j(sub rads) [HCHO] provides a time-scale, we may understand distant-plume particle production in a more quantitative manner. Additionally we report on a statistical search in the nearer field for relationships between glyoxals (important near-terminal aromatic and isoprene reaction products) and aerosol production, looking for VOC's that might be most implicated. All three variables j(sub rads), [HCHO], and [NO] are relatively easily measured in widespread air pollution monitoring networks, and all are deducible form space-borne observations, though estimation of [NO] from [NO2] (the species observable from space) may require care. We report also on airborne and surface observations of HCHO, suggesting that concentrated (urban) and more diffuse (forest) sources may be distinguishable from space. The use of the 3.58 micron microwindow for HCHO remote sensing should allow much sharper resolution of HCHO than the UV. UV sensing requires large and expensive instruments, but even these seem justified since formaldehyde is so informative.

Chatfield, Robert↗

Rotational Variation of Daughter Species Production Rates in Comet 103P/Hartley: Implications for the Progeny of Daughter Species and the Degree of Chemical Heterogeneity

We present analysis of high spectral resolution optical spectra of Comet 103P/Hartley taken during its Fall 2010 apparition. These spectra include transitions belonging to CN, C2, CH, NH2, and OI. We measure production rates and mixing ratios from these spectra. We find evidence for large changes in production rates (factors of a few) over the course of a nucleus rotation, in agreement with other measurements. We also measure variability with rotational phase in the CN/H2O and C2/CN ratios, which has not been previously reported for any comet. There may also be variability in the NH2/H2O ratio with rotational phase, but this trend is not as clear as for CN/H2O. We interpret the changing mixing ratios as due to H2O and C2 being released primarily from the icy grain halo, while the CN parent molecule comes directly from the nucleus. There is evidence that the CH/CN ratio is higher pre-perihelion than post-perihelion. We conclude that the observed CN and NH2 abundances are consistent with HCN and NH3 being the dominant parent molecules for these species. The C2 and CH abundances are higher than those of candidate parent molecules (C2H2 and CH4 respectively), so there must be another source for these molecules in 103P's coma. Carbonaceous dust grains could serve as this source.

Comets↗

A calibration of the production rate ratio P-21/P-26 by low energy secondry neutrons: Identification of Ne spallation components at the 10(exp 6) atoms/g level in terrestrial samples

The spallation ratio (Ne-22/Ne-21)(sub c) from Si was determined as 1.243 plus or minus 0.022 in a terrestrial quartz sample. We carried out a calibration of the in-situ production rate ratio P-21/P-26 in quartz samples for which Be-10 and Al-26 production rates were previously measured. A ratio P-21/P-26 of 0.67 plus or minus 0.12 is obtained.

Graf, TH.↗

Comet Austin (1989c1) O(1D) and H2O production rates

The dual-etalon Fabry-Perot spectrometer of Kitt Peak's McMath solar telescope has been used to conduct Comet Austin observations with spectral scan resolutions of 0.21 A; this sufficed for resolution of cometary forbidden O I 6300 A emissions from nearby NH2, as well as telluric emissions of the same type. For these data, an O(1D) production rate is obtained which is noted to be nearly model-independent. The H2O production rate is determined by taking into account the photodissociation of H2O and OH as sources of O(1D).

Schultz, D.↗

Cosmogenic Cl-36 production rates in meteorites and the lunar surface

Activity vs. depth profiles of cosmic ray produced Cl-36 were measured in metal from two cores each in the St. Severin and Jilin chondrites and in lunar core 15008. Production of Cl-36 in these samples range from high-energy reactions with Fe and Ni to low-energy reactions with Ca and K and possibly neutron-capture reactions with Cl-36. The cross sections used in the Reedy-Arnold model for neutron-induced reactions were adjusted to get production rates that fit the measured Cl-36 activities in St. Severin metal and in the lunar soil of core 15008. The Cl-36 in metal from St. Severin has a fairly flat activity-vs-depth profile, unlike most other cosmogenic nuclides in bulk samples from St. Severin, which increase in concentration with depth. In metal from Jilin, a decrease in Cl-36 was observed near its center. The length of Jilin's most recent cosmic-ray exposure was approximately 0.5 My. Lunar core 15008 has an excess in Cl-36 of about 4 dpm/kg near its surface that was produced by solar-proton-induced reactions. The calculated production rates are consistent with these measured trends in 15008.

Nishiizumi, K.↗

Production rates of neon xenon isotopes by energetic neutrons

As a first step in an experimental program to study the behavior of noble gases produced in situ in minerals, a suite of minerals and pure chemicals were irradiated with 14.5 MeV neutrons at LLNL's Rotating Target Neutron Source (RTNS-II) and production rates for noble gases were determined. While neutron effects in meteorites and lunar samples are dominated by low-energy neutron capture, more energetic cosmic-ray secondary neutrons can provide significant depth-dependent contributions to production of cosmogenic nuclides through endothermic reactions such as (n,2n), (n,np), (n,d) and (n,alpha). Production rates for nuclides produced by cosmic-ray secondary neutrons are therefore useful in interpreting shielding histories from the relative abundances of cosmogenic nuclides. Absolute production cross sections were calculated from isotope dilution analyses of NaCl, Mg, CsCl, and Ba(NO3)2 samples, assuming purity, stoichiometry, and quantitative noble gas retention and extraction. Relative production cross sections determined from neon isotopic ratios in the mineral samples were also considered in evaluating the neon production cross sections. Results are presented.

Leich, D. A.↗

Calculations of cosmogenic nuclide production rates in the Earth's atmosphere and their inventories

The production rates of cosmogenic isotopes in the Earth's atmosphere and their resulting terrestrial abundances have been calculated, taking into account both geomagnetic and solar-modulatory effects. The local interstellar flux was assumed to be that of Garcia-Munoz, et al. Solar modulation was accounted for using the heliocentric potential model and expressed in terms of the Deep River neutron monitor count rates. The geomagnetic field was presented by vertical cutoffs calculated by Shea and Smart and the non-vertical cutoffs calculated using ANGRI. The local interstellar particle flux was first modulated using the heliocentric potential field. The modulated cosmic-ray fluxes reaching the earth's orbit then interacted with the geomagnetic field as though it were a high-pass filter. The interaction of the cosmic radiation with the Earth's atmosphere was calculated utilizing the Bolztmann transport equation. Spallation cross sections for isotope production were calculated using the formalism of Silberberg and Tsao and other cross sections were taken from standard sources. Inventories were calculated by accounting from the variation in solar modulation and geomagnetic field strength with time. Results for many isotope, including C-14, Be-7 and Be-10 are in generally good agreement with existing data. The C-14 inventory, for instance, amounts to 1.75/sq cm(e)/s, in excellent agreement with direct estimates.

Obrien, K.↗

Comet Halley O(1D) and H2O production rates

Ground-based dual-etalon Fabry-Perot spectrometer observations have been made of Comet Halley's forbidden O I 6300 A emission. The 0.2 A resolution of the spectral scans was sufficient to resolve the O I forbidden line emissions from both nearby cometary NH2 and telluric emissions. On the basis of these measurements, the production rate Q of O(1D) was determined; it is then found, by taking into account the photodissociation of H2O and OH as sources of O(1D), that the ratio of H2O/O(1D) production rates is of the order of 6.

Magee-Sauer, K.↗

A semi-empirical photometric theory of cometary gas and dust production: Application to P/Halley's gas production rates

The semiempirical photometric theory of cometary gas and dust production is recalibrated using UV observations from 14 comets and uniform visual photometry from 8 comets. The calibration is not changed significantly but becomes more secure. The complete theory is presented with all approximations evaluated and explained. Numerical calibration aspects are presented in tables. The theory is applied to P/Halley using a light curve without the artifact caused by the close approach to Earth in 1910. Gas production rates predicted for the 1985/86 apparition are similar to those for 1910.

Newburn, R. L.↗

The exposure history of Jilin and production rates of cosmogenic nuclides

Jilin, the largest known story meteorite, is a very suitable object for studying the systematics of cosmic ray produced nuclides in stony meteorites. Its well established two stage exposure history even permits to gain information about two different irradiation geometries (2pi and 4pi). All stable and long-lived cosmogenic nuclides measured in Jilin so far correlate well with each other. An example is shown where the Al-26 activities are plotted vs. the spallogenic Ne-21 concentration. These records of cosmic-ray interaction in Jilin can be used both to determine the history of the target and to study the nature of production rate profiles. This is unavoidably a bootstrap process, involving studying one with assumption about the other. Production rate equations are presented and discussed.

Heusser, G.↗

Changes in atmospheric composition inferred from ionospheric production rates

Changes in the total electron content of the ionosphere near sunrise are used to determine the integrated production rate in the ionosphere (Q) from 1965 to 1971 at latitudes of 34S, 20N, and 34N. The observed regular semiannual variation in Q through a range of 1:3:1 is interpreted as an increase in the ratio O/N2 (relative densities) near the equinoxes. It follows that there is a worldwide semiannual variation in atmospheric composition, with the above ratio maximum just after the equinoxes. There is a large seasonal variation in the Northern hemisphere with a maximum in mid-summer. This effect is absent in the Southern hemisphere. At all times except solar maximum in the Northern hemisphere there is a global asymmetry. The ratio O/N2 is about three times as large in the Northern hemisphere. The overall mechanism appears to be N2 absorption.

Titheridge, J. E.↗

Effects of bulk composition on production rates of cosmogenic nuclides in meteorites

The bulk chemical composition of meteorites has been suggested as a main factor influencing the production of cosmogenic nuclides. Numerical simulations with Los Alamos Monte Carlo production and transport codes were done for Ne-21/Ne-22 ratios and Ar-38 production rates in meteorites with a wide range of compositions. The calculations show that an enhanced flux of low-energy secondary particles in metal-rich phases is the essential key for the explanation of experimentally observed differences in nuclide production processes in various meteorite classes.

Masarik, Jozef↗

The bounds of the heat production rate within the moon

A new approach is proposed to the evaluation of the lower and upper bounds of the global heat production rate within planetary interiors. The approach is based on the relationship between the internal energy change and the volume change of a planetary object. For illustration, the approach is applied to the moon. Using an average global surface heat flux of 18 erg/sq cm-sec, and assuming constancy of the lunar radius during the past 3.2 billion years. the lunar heat release within the past 3.2 billion years is estimated at (30 to 40) x 10 to the tenth erg/cu cm. This is equivalent to the present day uranium concentration of 35 to 50 ppb provided the radiogenic isotopes are of the same proportion as that given by Toksoz et al. (1978).

Hsui, A. T.↗