Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unexpected origin of the quantum efficiency reduction in long-wavelength (In,Ga)⁢N light-emitting diodes

Differential carrier lifetime (DCL) measurements were performed on c-plane In 𝑥 ⁢Ga 1−𝑥⁢ N/Ga⁢N single-quantum-well (QW) light-emitting diodes (LEDs) with varying indium-content QWs (x = 13.5%, 16%, 22%), emitting with violet, blue, and green wavelengths. The recombination lifetimes of LEDs were found to increase with increasing indium composition, resulting in increased carrier densities n measured by DCL. Extraction of the A coefficients, which are assumed to not vary with n, and of the effective B(n) and C(n) coefficients of the ABC model of the internal quantum efficiency (IQE) of QWs showed no significant changes in the A coefficient with increasing indium content [In] in the In 𝑥 ⁢Ga 1−𝑥 ⁢N QW, and a reduction in the B(n) and C(n) coefficients with increasing [In]. When looking at the Shockley-Read-Hall (SRH) recombination rate An, the radiative recombination rate B(n)𝑛 2 , and the Auger-Meitner (AM) recombination rate C(n)𝑛 3 , we observed that at any given n, the SRH rate is the same for the three [In] measured, while the radiative rate decreases (by up to approximately 9 times) and the AM rate decreases (by up to approximately 7 times) with increasing indium content. This shows that the larger reduction in radiative recombination rates relative to nonradiative recombination rates with increasing [In] is the largest contributor to the decreased quantum efficiencies of LEDs (the “green gap”) at any given n. While some of the reduction in the effective recombination coefficients B(n) and C(n) can be explained by the reduced wave-function overlaps of the QW with increasing indium content, the larger reduction of B(n) relative to C(n) motivates further study of the intrinsic recombination coefficients 𝐵 0 and 𝐶 0 of bulk In 𝑥 ⁢Ga 1−𝑥 ⁢N alloys and how they are related to the effective recombination coefficients B(n) and C(n) in QWs. The relative contributions of nonradiative recombination are enhanced at any given current density due to the sublinear relationship between the carrier density n and the current density. Thus, the solution to the green gap, up to any intrinsic limitations set by the indium content of the QW, from an IQE perspective, requires the design of long-wavelength (In,Ga)⁢N LEDs with improved wave-function overlaps that can operate with a lower carrier density at any given current density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Quantum efficiency enhancement in simulated nanostructured negative electron affinity GaAs photocathodes

We report nanostructured negative electron affinity GaAs photocathodes for a polarized electron source are studied using finite difference time domain optical simulation. The structures studied are nanosquare columns, truncated nanocones, and truncated nanopyramids. Mie-type resonances in the 700–800 nm waveband, suitable for generation of polarized electrons, are identified. At resonance wavelengths, the nanostructures can absorb up to 99% of the incident light. For nanosquare columns and truncated nanocones, the maximum quantum efficiency (QE) at 780 nm obtained from simulation is 27%, whereas for simulated nanopyramids, the QE is ~21%. The high photocathode quantum efficiency is due to the shift of Mie resonance toward the longer wavelength, leading to increased light absorption. The field profile distribution shows the excitation of dipole and quadrupole modes within the nanostructures at resonant frequencies. This leads to enhanced photoabsorption and photoelectron generation closer to emission surfaces than for a flat photocathode. The enhanced photoabsorption and reduced electron transport distance for the nanostructured photocathode enhance its QE compared to that for the flat surface wafer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Implications of Electron Transport Layer and Back Metal Contact Variations in Tin–Lead Perovskite Solar Cells Assessed by Spectroscopic Ellipsometry and External Quantum Efficiency

The structural and optical properties of hybrid organic–inorganic metal halide perovskite solar cells are measured by spectroscopic ellipsometry to reveal an optically distinct interfacial layer among the back contact metal, charge transport, and absorber layers. Understanding how this interfacial layer impacts performance is essential for developing higher performing solar cells. Here, this interfacial layer is modeled by Bruggeman effective medium approximations (EMAs) to contain perovskite, C 60 , BCP, and metal. External quantum efficiency (EQE) simulations that consider scattering, electronic losses, and the formation of nonparallel interfaces are created with input derived from ellipsometry structural-optical models and compared with experimental EQE to estimate optical losses. This nonplanar interface causes optical losses in short circuit current density (JSC) of up to 1.2 mA cm –2 . A study of glass/C 60 /SnO 2 /Ag or Cu and glass/C 60 /BCP/Ag film stacks shows that C 60 and BCP mix, but replacing BCP with SnO 2 can prevent mixing between the ETLs to prevent contact between C 60 and back contact metal and enable the formation of a planar interface between ETLs and back contact metals.

14 SOLAR ENERGY↗
DOE OSTI2021

First Soft X-ray Quantum Efficiency Measurements on Microwave Annealed Thin-Entrance Window Sensors

Free electron lasers, such as SLAC’s LCLS-II, will provide unique scientific imaging opportunities. In order to fully utilize these facilities, we need to develop detectors with shallow entrance windows that will enable detection of soft x-rays from 250eV-1.5KeV. In addition, there are other light sources such as the FERMI, EuXFEL, and FLASH XFELs, as well as numerous synchrotrons such as the ALS, where soft x-ray science would benefit from detectors with higher quantum efficiency in the 20 eV to 1.5KeV range.A new microwave annealing technology provides an efficient way to achieve shallow entrance windows in fully depleted high-resistivity silicon sensors. Previously, SRP and SIMS measurements were used to characterize the shallow dopant profile, and sensors with the new entrance window process were deployed successfully to measure an Fe-55 x-ray spectrum. For the first time, we present quantum efficiency measurement for soft x-rays. Furthermore, the resulting estimate of the entrance window is 20nm for an arsenic implanted entrance window and 55nm for a boron implanted entrance window.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Effect of activation temperature on quantum efficiency and lifetime of NEA truncated nanocone array GaAs photocathode

This study investigates the quantum efficiency (QE) and operational lifetime of a negative electron affinity GaAs truncated nanocone array (TNCA) photocathode benchmarked against a conventional flat GaAs photocathode under varying activation temperatures. The TNCA structure demonstrated a QE of up to 13.6% at 590 nm with room temperature (RT) activation—approximately 1.5 times higher than its flat counterpart. This enhancement is due to Mie resonance effects within the nanostructure, as confirmed by finite-difference time-domain simulations. Moreover, the TNCA photocathode exhibits significantly extended charge lifetime, with enhancement factors of ∼6.1 and ∼19.8 under RT and 50 °C activations, respectively. These gains are primarily attributed to increased effective surface area and optimized dipole layer formation at elevated temperatures. In addition, shorter excitation wavelengths further contribute to lifetime improvements. These findings underscore the TNCA GaAs photocathode’s potential as a high QE, long lifetime electron source for many large-scale electron accelerators.

Cs-NF3 activation↗
DOE OSTI2022

Interdigitated electrode geometry variation and external quantum efficiency of GaN/AlGaN-based metal-semiconductor-metal UV photodetectors

Aluminum gallium-nitride (Al x Ga 1–x N)-based metal–semiconductor–metal (MSM) ultraviolet photodetectors photodetectors (PD’s) have been successfully designed and fabricated using conventional photolithography techniques and tested experimentally to study their spectral sensitivity across different Al content, x, with x varying from 0 to 0.3. (Al)GaN-based UV PD’s have wide and tunable direct band gaps. The ability to easily select the photodetected wavelength by simply varying the aluminum content of GaN thin film (Al x Ga 1–x N) is a significant advantage of these group III–V compounds. Typically, MSM PD’s grown on (Al)GaN thin films result in ultrafast photodetection because of their highly mobile carriers. These devices are limited by the carrier transit time due to the negligible capacitance presented by the interdigitated fingers. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the devices’ performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Here, coupled with the independently measured Hall mobility and electric field, we computed the carrier transit time of the devices to be as short as 1.31 ps and the bias-voltage–independent external quantum efficiencies were as high as 70% at 60 V for n-doped and intrinsic devices when operated in the reverse bias regime. Here, (Al x )Ga 1–x N photodetectors were designed to explore spectral sensitivity by altering x from 0 to 0.3.

42 ENGINEERING↗
DOE OSTI2025

Bias‐Dependent Quantum Efficiency Reveals Recombination Pathways in Thin Film Solar Cells

Identifying where recombination predominantly occurs—whether at the front interface, back interface, or throughout the bulk—is crucial for optimizing CdSeTe solar cells and many other photovoltaic device architectures. Here, a simple and effective diagnostic is demonstrated: measuring external quantum efficiency (QE) under varying forward biases. The drift–diffusion simulations reveal that each recombination pathway leaves a distinct bias-induced signature in the normalized QE: a progressive drop at long wavelengths for back-limited devices, a short-wavelength decline for front-limited devices, and a relatively uniform decrease across all wavelengths for bulk-limited devices. These predictions are validated with experiments on As-doped and Cu-doped CdSeTe devices, with and without passivation layers or different front buffers. In each case, the observed bias-dependent QE spectral changes align with the simulated recombination map. Because this method uses standard QE instrumentation, it offers a broadly accessible and cost-efficient means to diagnose recombination pathways—extending beyond CdSeTe to other thin-film and emerging solar cell technologies. By pinpointing recombination bottlenecks, researchers and manufacturers can strategically refine doping profiles, passivation schemes, and interface designs to further improve device performance.

CdTe↗
DOE OSTI2023

Epitaxial hexagonal boron nitride with high quantum efficiency

Two-dimensional (2D) hexagonal boron nitride (h-BN) is one of the few materials showing great promise for light emission in the far ultraviolet (UV)-C wavelength, which is more effective and safer in containing the transmission of microbial diseases than traditional UV light. In this report, we observed that h-BN, despite having an indirect energy bandgap, exhibits a remarkably high room-temperature quantum efficiency (~60%), which is orders of magnitude higher than that of other indirect bandgap material, and is enabled by strong excitonic effects and efficient exciton-phonon interactions. This study offers a new approach for the design and development of far UV-C optoelectronic devices as well as quantum photonic devices employing 2D semiconductor active regions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Rapid thermal emittance and quantum efficiency mapping of a cesium telluride cathode in an rf photoinjector using multiple laser beamlets

Thermal emittance and quantum efficiency (QE) are key figures of merit of photocathodes, and their uniformity is critical to high-performance photoinjectors. Several QE mapping technologies have been successfully developed; however, there is still a dearth of information on thermal emittance maps. This is because of the extremely time-consuming procedure to gather measurements by scanning a small beam across the cathode with fine steps. To simplify the mapping procedure and to reduce the time required to take measurements, we propose a new method that requires only a single scan of the solenoid current to simultaneously obtain thermal emittance and QE distribution by using a pattern beam with multiple beamlets. In this paper, its feasibility has been confirmed by both beam dynamics simulation and theoretical analysis. The method has been successfully demonstrated in a proof-of-principle experiment using an L-band radio-frequency photoinjector with a cesium telluride cathode. In the experiment, seven beamlets were generated from a microlens array system and their corresponding thermal emittance and QE varied from 0.93 to 1.14 mu m/nun and from 4.6% to 8.7%, respectively. We also discuss the limitations and future improvements of the method in this paper.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Quantum efficiency and lifetime study for negative electron affinity GaAs nanopillar array photocathode

Recent studies showed significant improvement in quantum efficiency (QE) by negative electron affinity (NEA) GaAs nanopillar array (NPA) photocathodes over their flat surface peers, particularly at 500 ─ 800 nm waveband. However, the underlying physics is yet to be well understood for further improvement in its performance. In this report, NEA GaAs NPA photocathodes with different dimensions were studied. The diameter of the nanopillars varied from 200 ─ 360 nm, the height varied from 230 ─ 1000 nm and the periodicity varied from 470 ─ 630 nm. The QE and photocathode lifetime were measured. Mie-resonance enhancement was observed at tunable resonance wavelengths. Simulations was also performed to understand the mechanism of photo-absorption and possible ways to further improve the photocathode performance to meet the stringent requirement of the electron sources in large scale electron accelerators. **Acknowledgement** Authored by Jefferson Science Associates, LLC under U.S. DOE contract no. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes. *mrahm008@odu.edu

Rahman, M.↗
DOE OSTI2026

Impact of superlattice size on quantum efficiency and polarization in MOCVD-grown strained GaAs/GaAsP photocathodes

Strained superlattice GaAs photocathodes are crucial for providing high photocurrent beams of spin-polarized electrons at several accelerator facilities including the Continuous Electron Beam Accelerator Facility at Thomas Jefferson National Accelerator Facility and the future Electron–Ion Collider at Brookhaven National Laboratory. Here, in this work, we study the effects of varying the number of superlattice pairs on the polarization and photocurrent of the photocathodes. We observe a saturation in quantum efficiency beyond 30 pairs, with additional layers yielding minimal photocurrent improvement while noticeably reducing the polarization of the beam.

Chemical vapor deposition↗
DOE OSTI2024

Soft X-ray quantum efficiency of a commercial CMOS imaging sensor

The demonstrated performance and cost-effectiveness of complementary metal-oxide-semiconductor (CMOS) sensors make them a potentially attractive option for low-cost space-based X-ray observatories. We have previously reported on the performance of a commercially available backside-illuminated Sony IMX290LLR-C CMOS sensor and found it to offer X-ray spectral resolutions comparable to the charged coupled devices (CCDs) aboard Suzaku and Chandra and to have a sufficient radiation hardness for use in low Earth orbit. Here, in this work, we report on the quantum efficiency (QE) of this sensor, an essential metric for modeling the sensitivity of an instrument as an X-ray detector. Using the Advanced Photon Source at Argonne National Laboratory, we measure the soft X-ray QE of this CMOS sensor to be 0.28 ± 0.02 at a photon energy of 490.5 eV. This energy was chosen for its proximity to the astrophysically important O VII triplet emission lines (~574 eV) studied by the HaloSat mission. Although not surpassing that of the back-illuminated CCDs aboard Suzaku and Chandra, this QE compares favorably to that of the front-illuminated CCDs aboard the same observatories and is competitive with that of the silicon drift detectors used aboard HaloSat, making it a strong candidate for use on future X-ray small satellite (SmallSat) missions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Designing Energy-Efficient Quantum Computers Through Prediction and Reduction of Cooling Requirements for Cryogenic Electronics

Quantum computing has been identified as a “wild card” by the International Energy Agency in predicting future global data center energy usage. This is primarily because both uncertainty in the extent to which quantum computing will be adopted, and uncertainty in the power consumption of individual quantum data centers. Unlike the classical counterparts, quantum computers need to be maintained at near absolute zero, requiring energy-intensive cryogenic cooling systems. Therefore, as quantum computers scale up from existing 50 qubit technology demonstrations to the 10,000 to 100,000 qubit systems that will be able to solve complex problems, the energy consumption of both the electronics and the required cooling systems will also increase. To predict this scaling, this work analyzes the energy requirements for both computation and cooling of quantum hardware. We show that the energy requirements for cooling of quantum computers is determined by several computing system parameters, including the number and type of physical qubits, the operating temperature, the packaging efficiency of the system, and the split between circuits operating at cryogenic temperatures and those operating at room temperature. The energy requirements can then be found based on thermal system parameters such as cooling efficiency and cryostat heat transfer. Analysis of these parameters shows that the energy required for cooling is significantly larger than that required for computation, a reversal from energy usage patterns seen in conventional computing. The results and discussions provide a road-map for creating energy efficient quantum computers through the selection of computer architectures and cryogenic system configurations that minimize cooling requirements.

energy efficiency↗
DOE OSTI2021

Boosting the External Quantum Efficiency of AlGaN-Based Metal–Semiconductor–Metal Ultraviolet Photodiodes by Electrode Geometry Variation

Fast aluminum-gallium-nitride–based metal–semiconductor–metal ultraviolet photodiodes were successfully designed, fabricated, and characterized using conventional photolithography techniques. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the device performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Furthermore, based on the independently measured Hall mobility and electric field, we evaluated the carrier transit time of the devices as 1.31 ps with bias-voltage–independent external quantum efficiency of 1198% in photoconductive mode at 19.5 V and 70% at 60 V for n -doped and intrinsic devices, respectively.

42 ENGINEERING↗
DOE OSTI2025

Efficient quantum simulation of QCD jets on the light front

Quark and gluon jets provide one of the best ways to probe the matter produced in ultrarelativistic high-energy collisions, from cold nuclear matter to hot quark-gluon plasma. In this work, we propose a unified framework for efficient quantum simulation of many-body dynamics using the ( 3 + 1 )-dimensional QCD Hamiltonian on the light front, particularly suited for studying the scattering of quark and gluon jets on nuclear matter in heavy-ion collisions. We describe scalable methods for mapping physical degrees of freedom onto qubits and for simulating in-medium jet evolution. We then validate our framework by implementing an algorithm that directly maps second-quantized Fock states onto qubits and uses Trotterized simulation for simulating time dynamics. Using a classical emulator, we investigate the evolution of quark and gluon jets with up to three particles in Fock states, extending prior studies. These calculations enable the study of key observables, including jet momentum broadening, particle production, and parton distribution functions. Published by the American Physical Society 2025

Qian, Wenyang (ORCID:0000000155250996)↗
DOE OSTI2023

High external quantum efficiency (6.5%) InGaN V-defect LEDs at 600 nm on patterned sapphire substrates

Highly efficient long-wavelength InGaN LEDs have been a research focus in nitride LEDs for their potential applications in displays and solid-state lighting. A key breakthrough has been the use of laterally injected quantum wells via naturally occurring V-defects which promote hole injection through semipolar sidewalls and help to overcome the barriers to carrier injection that plague long wavelength nitride LEDs. In this article, we study V-defect engineered LEDs on (0001) patterned sapphire substrates (PSS) and GaN on (111) Si. V-defects were formed using a 40-period InGaN/GaN superlattice and we report a packaged external quantum efficiency (EQE) of 6.5% for standard 0.1 mm 2 . LEDs on PSS at 600 nm. We attribute the high EQE in these LEDs to lateral injection via V-defects.

Ewing, Jacob J.↗
DOE OSTI2023

Demonstration of multi-active region p-down green LEDs with high quantum efficiency

Abstract Longer wavelength emitters such as green LEDs display a pronounced efficiency drop at higher current densities, resulting in relatively low wall-plug efficiency (WPE). Multi-active region approach can improve the WPE significantly and tackle the “green gap” challenge. This work reports multi-active region p-down LEDs with high external efficiency operating entirely in the green wavelength. Devices were developed using p-down topology, where the PN junction is oriented such that electric fields from depletion and built-in polarization dipoles are aligned. Ga-polar multi-active region green LEDs with excellent voltage and external quantum efficiency scaling, and significantly higher WPE is demonstrated in this work.

Physics↗
DOE OSTI2025

Polarized Photocathodes development for the EIC: Optimizing Spin and Quantum Efficiency

GaAs/GaAsP superlattice photocathodes play a critical role for producing highly polarized electron beams for the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. The electron pre-injector for the EIC requires electron bunches with high bunch charge (1-2 nC) and high polarization, from GaAs-based superlattice photocathode. Herein, we have systematically investigated a range of GaAs/GaAsP superlattice photocathodes fabricated via molecular beam epitaxy (MBE) and metal-organic chemical vapor deposition (MOCVD). Through optimization of pre-cleaning procedures and surface doping conditions, we aim to identify the most promising photocathode configurations for future EIC operations. To enhance the quantum efficiency (QE), a Distributed Bragg Reflector structure is frequently incorporated beneath the superlattice. While this approach effectively increases QE, it also introduces additional complexities that can adversely influence spin polarization and the spectral response at specific laser wavelengths. This note provides an overview of superlattice GaAs development and outlines the EIC team’s ongoing efforts to address related challenges and advance high-performance photocathode development tailored for the EIC. Over five years of multi-institutional collaboration and measurements of about 50 SL-GaAs samples, our analysis presents statistics on samples exhibiting high ESP and high QE. It will help to set the initial ESP requirements for the EIC project.

43 PARTICLE ACCELERATORS↗