Search NASA⌕ Search

SEARCH · Search NASA

Results for “Queues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Parallel discrete-event simulation of FCFS stochastic queueing networks

Physical systems are inherently parallel. Intuition suggests that simulations of these systems may be amenable to parallel execution. The parallel execution of a discrete-event simulation requires careful synchronization of processes in order to ensure the execution's correctness; this synchronization can degrade performance. Largely negative results were recently reported in a study which used a well-known synchronization method on queueing network simulations. Discussed here is a synchronization method (appointments), which has proven itself to be effective on simulations of FCFS queueing networks. The key concept behind appointments is the provision of lookahead. Lookahead is a prediction on a processor's future behavior, based on an analysis of the processor's simulation state. It is shown how lookahead can be computed for FCFS queueing network simulations, give performance data that demonstrates the method's effectiveness under moderate to heavy loads, and discuss performance tradeoffs between the quality of lookahead, and the cost of computing lookahead.

Nicol, David M.↗
NASA NTRS1990

Queueing models for token and slotted ring networks

Currently the end-to-end delay characteristics of very high speed local area networks are not well understood. The transmission speed of computer networks is increasing, and local area networks especially are finding increasing use in real time systems. Ring networks operation is generally well understood for both token rings and slotted rings. There is, however, a severe lack of queueing models for high layer operation. There are several factors which contribute to the processing delay of a packet, as opposed to the transmission delay, e.g., packet priority, its length, the user load, the processor load, the use of priority preemption, the use of preemption at packet reception, the number of processors, the number of protocol processing layers, the speed of each processor, and queue length limitations. Currently existing medium access queueing models are extended by adding modeling techniques which will handle exhaustive limited service both with and without priority traffic, and modeling capabilities are extended into the upper layers of the OSI model. Some of the model are parameterized solution methods, since it is shown that certain models do not exist as parameterized solutions, but rather as solution methods.

Peden, Jeffery H.↗
NASA NTRS1990

Stochastic ordering properties and optimal routing control for a class of finite capacity queueing systems

The problem of routing jobs to parallel queues with identical exponential servers and unequal finite buffer capacities is considered. Stochastic ordering and weak majorization properties on critical performance measures are established by means of event-driven inductions. In particular, it is shown that the intuitive 'join the shortest non-full queue' (SNQ) policy is optimal with respect to an overall function that accounts for holding and blocking costs. Moreover, the buffer allocation problem is solved by proving the intuitive result that, for a fixed total buffer capacity, the optimal allocation scheme is the one in which the difference between the maximum and minimum queue capacities is minimized, i.e., becomes either 0 or 1.

Towsley, Don↗
NASA NTRS1991

Smoothed perturbation analysis algorithms for estimating the derivatives of occupancy-related functions in serial queueing networks

The authors present smoothed perturbation analysis (SPA) estimators for the derivative of a number of occupancy-related functions in serial queuing networks with finite buffer spaces. The functions are the average number of customers at a network as seen by an arrival, the probability that a customer is blocked at a particular queue, and the probability that a customer leaves a queue empty. In all three cases, the variable is a parameter of the distribution of service times at one of the queues. The derivative estimators considered are very simple and flexible, and they easily lend themselves to analysis of unbiasedness. Unlike most of the established SPA estimators, the present ones are not based on the computation of hazard rates.

Wardi, Y.↗
DOE OSTI2024

P38 heterogeneous multi-tiled system with support for message queues (MoSAIC) v0.1

The proposed system is written in the hardware description language (HDL) verilog targeting an FPGA board. It is intended as a testbed to explore architecture tradeoffs in multi-tiled heterogeneous architectures. Although we target FPGAs, the system can be implemented as a monolithic SoC or a package comprised of many chiplets that are interconnected in the same package using a NoC. The proposed NoC is lightweight and follows an axi-lite interface. The endpoints of the NoC are a heterogeneous mix of "tiles" as endpoints that are general purpose processors, fixed function accelerators, and programmable accelerators. We assume that the network interfaces for the NoC endpoints are all addressable in a global name-space in that they represent an address range (for memory addresses) or a range of unique identifiers that are associated with each individual tile. This makes the functionality abstract from the standpoint of the NoC design details. Message queues offer a direct inter-processor interface between peer general purpose cores and diverse accelerators that comprise an SoC. Although they share the same NoC infrastructure for inter-tile communication within an SoC or SiP, the hardware message queues bypass the memory hierarchy and thus do not pollute the memory state or invoke the cache coherence mechanism.

Gonzalez, LouisaPatricia↗
NASA NTRS1988

Network Queueing System

Program directs traffic in UNIX-based network. NQS provides facilities for remote queueing, request routing, remote status, queue-access controls, batch-request resource-quota limits, and remote output return. Written in C.

Kingsbury, Brent↗
NASA NTRS1990

Conservative parallel simulation of priority class queueing networks

A conservative synchronization protocol is described for the parallel simulation of queueing networks having C job priority classes, where a job's class is fixed. This problem has long vexed designers of conservative synchronization protocols because of its seemingly poor ability to compute lookahead: the time of the next departure. For, a job in service having low priority can be preempted at any time by an arrival having higher priority and an arbitrarily small service time. The solution is to skew the event generation activity so that the events for higher priority jobs are generated farther ahead in simulated time than lower priority jobs. Thus, when a lower priority job enters service for the first time, all the higher priority jobs that may preempt it are already known and the job's departure time can be exactly predicted. Finally, the protocol was analyzed and it was demonstrated that good performance can be expected on the simulation of large queueing networks.

Nicol, David M.↗
NASA NTRS1992

Conservative parallel simulation of priority class queueing networks

A conservative synchronization protocol is described for the parallel simulation of queueing networks having C job priority classes, where a job's class is fixed. This problem has long vexed designers of conservative synchronization protocols because of its seemingly poor ability to compute lookahead: the time of the next departure. For, a job in service having low priority can be preempted at any time by an arrival having higher priority and an arbitrarily small service time. The solution is to skew the event generation activity so that the events for higher priority jobs are generated farther ahead in simulated time than lower priority jobs. Thus, when a lower priority job enters service for the first time, all the higher priority jobs that may preempt it are already known and the job's departure time can be exactly predicted. Finally, the protocol was analyzed and it was demonstrated that good performance can be expected on the simulation of large queueing networks.

Nicol, David↗
NASA NTRS2002

Resource Selection Using Execution and Queue Wait Time Predictions

Computational grids provide users with many possible places to execute their applications. We wish to help users select where to run their applications by providing predictions of the execution times of applications on space shared parallel computers and predictions of when scheduling systems for such parallel computers will start applications. Our predictions are based on instance based learning techniques and simulations of scheduling algorithms. We find that our execution time prediction techniques have an average error of 37 percent of the execution times for trace data recorded from SGI Origins at NASA Ames Research Center and that this error is 67 percent lower than the error of user estimates. We also find that the error when predicting how long applications will wait in scheduling queues is 95 percent of mean queue wait times when using our execution time predictions and this is 57 percent lower than if we use user execution time estimates.

Warren, Smith↗
NASA NTRS2002

Resource Selection Using Execution and Queue Wait Time Predictions

Computational grids provide users with many possible places to execute their applications. We wish to help users select where to run their applications by providing predictions of the execution times of applications on space shared parallel computers and predictions of when scheduling systems for such parallel computers will start applications. Our predictions are based on instance based learning techniques and simulations of scheduling algorithms. We find that our execution time prediction techniques have an average error of 37 percent of the execution times for trace data recorded from SGI Origins at NASA Ames Research Center and that this error is 67 percent lower than the error of user estimates. We also find that the error when predicting how long applications will wait in scheduling queues is 95 percent of mean queue wait times when using our execution time predictions and this is 57 percent lower than if we use user execution time estimates.

Smith, Warren↗
NASA NTRS2007

A Queue Simulation Tool for a High Performance Scientific Computing Center

The NASA Center for Computational Sciences (NCCS) at the Goddard Space Flight Center provides high performance highly parallel processors, mass storage, and supporting infrastructure to a community of computational Earth and space scientists. Long running (days) and highly parallel (hundreds of CPUs) jobs are common in the workload. NCCS management structures batch queues and allocates resources to optimize system use and prioritize workloads. NCCS technical staff use a locally developed discrete event simulation tool to model the impacts of evolving workloads, potential system upgrades, alternative queue structures and resource allocation policies.

Spear, Carrie↗
DOE OSTI2024

Applying queueing theory to evaluate wait-time-savings of triage algorithms

Abstract In the past decade, artificial intelligence (AI) algorithms have made promising impacts in many areas of healthcare. One application is AI-enabled prioritization software known as computer-aided triage and notification (CADt). This type of software as a medical device is intended to prioritize reviews of radiological images with time-sensitive findings, thus shortening the waiting time for patients with these findings. While many CADt devices have been deployed into clinical workflows and have been shown to improve patient treatment and clinical outcomes, quantitative methods to evaluate the wait-time-savings from their deployment are not yet available. In this paper, we apply queueing theory methods to evaluate the wait-time-savings of a CADt by calculating the average waiting time per patient image without and with a CADt device being deployed. We study two workflow models with one or multiple radiologists (servers) for a range of AI diagnostic performances, radiologist’s reading rates, and patient image (customer) arrival rates. To evaluate the time-saving performance of a CADt, we use the difference in the mean waiting time between the diseased patient images in the with-CADt scenario and that in the without-CADt scenario as our performance metric. As part of this effort, we have developed and also share a software tool to simulate the radiology workflow around medical image interpretation, to verify theoretical results, and to provide confidence intervals for the performance metric we defined. We show quantitatively that a CADt triage device is more effective in a busy, short-staffed reading setting, which is consistent with our clinical intuition and simulation results. Although this work is motivated by the need for evaluating CADt devices, the evaluation methodology presented in this paper can be applied to assess the time-saving performance of other types of algorithms that prioritize a subset of customers based on binary outputs.

Thompson, Yee Lam Elim (ORCID:0000000196537707)↗
DOE OSTI2026

Queue wait time prediction in high performance computing (HPC) systems

High Performance Computing (HPC) systems are critical enablers for groundbreaking scientific research across various domains. Efficient resource allocation, facilitated by job scheduling, is paramount for maximizing the utilization of HPC systems. However, the variability in wait times for queued jobs poses challenges for users, necessitating accurate job wait time estimation. This paper explores the influence of job characteristics, including job size (the number of nodes requested and walltime), the queue to which the job is submitted and other resource requirements, on job wait times in leadership-class HPC systems. Focusing on the Theta Cray XC40 and Polaris machines at Argonne National Laboratory, the study evaluates the performance of different supervised learning algorithms in predicting job wait times. It also evaluates the impact of data preprocessing, including outlier detection, Principal Component Analysis (PCA), and feature selection, on the performance of wait time prediction models. The findings reveal insights into the relationship between job characteristics and wait times, offering a foundation for optimizing resource allocation and enhancing user experience. The methodologies and tools developed in this study are adaptable to other leadership-class HPC systems, providing a valuable contribution to the broader HPC community aiming to improve job scheduling efficiency and user satisfaction.

Okafor, Nwamaka↗
DOE OSTI2020

Highly Asynchronous Visitor Queue Graph Toolkit

HavoqGT (Highly Asynchronous Visitor Queue Graph Toolkit) is a framework for expressing asynchronous vertex-centric graph algorithms, and executing them on High Performance Computing (HPC) systems. It provides a vertex 'visitor' interface, where actions are defined at an individual vertex level, and contains a suite of classic graph algorithms. HavoqGT is capable of processing large graphs stored in NVRAM (SSDs) using a memory mapped interface.

Reza, TahsinA.↗
DOE OSTI2022

JobQueue-PG: A Task Queue for Coordinating Varied Tasks Across Multiple HPC Resources and HPC Jobs

The software allows for queueing and dispatch of tasks of small, varied, or uncertain runtimes across multiple HPC jobs, resources, and other computing systems. The software was designed to allow scientists to enqueue, run, and accumulate results from computational experiments in an efficient, manageable manner. For example, the software can be used to enqueue many small computational experiments and run them using several long-running multi-node HPC jobs that may or may not run simultaneously.

Tripp, Charles↗