Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIO RECEIVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

30 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Analysis of vapor diffusion Nb$^{3}$Sn coating at Fermilab: Minimizing impurities using TOF-SIMS

Nb₃Sn demonstrates steady advancements nowadays offering reduced power cost in superconducting radio-frequency cavities due to its high critical temperature, quality factor, and achieved accelerating gradient. However, theoretical estimates of its radio-frequency parameters have not been achieved due to several potentially limiting mechanisms: tin spots, patchy regions, defects, thermal impedance, and impurities. While some of these limitations have been intensively studied, impurity analysis in Nb$_3$Sn coatings have received less attention. We report an investigation of impurities in several vapor-diffused Nb₃Sn coated samples using time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and show allowable impurity levels in view of superconducting cavity performance. Challenges and lessons learned in maintaining clean Nb$_3$Sn coatings are also discussed.

Tagdulang, Nikki [Fermilab]↗
DOE OSTI2025

Challenges of Vapor Diffusion $Nb_3Sn$ Coating at Fermilab: Minimizing Impurities Using TOF-SIMS

Nb$_3$Sn demonstrates steady advancements nowadays offering reduced power cost in superconducting radio-frequency cavities due to its high critical temperature, quality factor, and achieved accelerating gradient. However, theoretical estimates of its radio-frequency parameters have not been achieved due to several potentially limiting mechanisms: tin spots, patchy regions, defects, thermal impedance, and impurities. While some of these limitations have been intensively studied, impurity analysis in Nb$_3$Sn coatings have received less attention. We report an investigation of impurities in several vapor-diffused Nb$_3$Snn coated samples using time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and show allowable impurity levels in view of superconducting cavity performance. Challenges and lessons learned in maintaining clean Nb$_3$Sn coatings are also discussed.

Tagdulang, N. [Fermilab]↗
DOE OSTI2025

Statistical Analysis of Trans‐Ionospheric Pulse Pairs and Inferences on Their Characteristics

Trans-ionospheric pulse pairs (TIPPs), first observed in 1993, are signatures of in-cloud lightning discharges observed by satellite-based broadband very high frequency (VHF) receivers. It has been definitively shown that TIPPs are the space-based signatures of compact intracloud discharges (CIDs), and that the associated pair of pulses that comprise a TIPP result from the direct VHF pulse from the discharge, followed by a pulse reflected from the Earth's surface. However, the ratio of the peak amplitudes of these two pulses can vary widely, with the second pulse often having considerably higher peak amplitude than the first. This observation has not been satisfactorily explained. Using data collected from geostationary orbit by the Radio Frequency Sensor (RFS) and matched to locations reported by the Global Lightning Dataset (GLD360), we assemble the largest database to date of 76,348 TIPPs with associated location, altitude, and amplitude ratio of the two pulses in the TIPP. We show that the amplitude ratio of TIPPs is strongly correlated to the altitude of the associated discharges and the geometry of the source location with respect to the Earth's surface and the receiver. These observations strongly suggest that the difference in amplitude of the two pulses is driven by a nondipole radiated beam pattern that is dependent on the polarity of the CID, velocity of the current wavefront, and viewing angle.

58 GEOSCIENCES↗
DOE OSTI2025

Accelerated Over-The-Air Neural Receiver Training Using Self-Contrastive Learning

Self-contrastive learning (SCL), a self-supervised learning method, has been shown to improve image and signal classifier accuracies and reduce the training time for neural communications receivers. In particular, prior work has shown that SCL applied as a pre-training step can improve simulated performance of OFDM in 3GPP TDL channel models by reducing the training time of the downstream classification task (demodulation and demapping). In this work a practical implementation demonstrating SCL pre-training using software defined radios (SDRs) is proposed.

Cooke, Corey [ORNL] (ORCID:0000000234263672)↗
DOE OSTI2025

Multiple Hypothesis Tracking for Opportunistic Transmitter Identification

The exploitation of radio frequency (RF) signals from Low Earth Orbit (LEO) communication satellites for the purposes of navigation is an active field of research. In this alternative navigation system, navigation observables are passively extracted from existing RF signals. Because these signals are not designed for navigation purposes and often have proprietary signal structures that are unknown to the receiver, they lack much of the information required for navigation systems or such information is unavailable to the receiver.

42 ENGINEERING↗
DOE OSTI2024

Fermi -LAT follow-up observations in seven years of real-time high-energy neutrino alerts

The realtime program for high-energy neutrino track events detected by the IceCube South Pole Neutrino Observatory releases alerts to the astronomical community with the goal of identifying electromagnetic counterparts to astrophysical neutrinos. Gamma-ray observations from theFermi-Large Area Telescope (LAT) enabled the identification of the flaring gamma-ray blazar TXS 0506+056 as a likely counterpart to the neutrino event IC-170922A. By continuously monitoring the gamma-ray sky,Fermi-LAT plays a key role in the identification of candidate counterparts to realtime neutrino alerts. In this paper, we present theFermi-LAT strategy for following up high-energy neutrino alerts applied to seven years of IceCube data. Right after receiving an alert, a search is performed in order to identify gamma-ray activity from known and newly detected sources that are positionally consistent with the neutrino localization. In this work, we study the population of blazars found in coincidence with high-energy neutrinos and compare them to the full population of gamma-ray blazars detected byFermi-LAT. We also evaluate the relationship between the neutrino and gamma-ray luminosities, finding different trends between the two blazar classes BL Lacs and flat-spectrum radio quasars.

Astronomy & Astrophysics↗
DOE OSTI2024

Imaging systems and related methods including radar imaging with moving arrays or moving targets

Imaging systems, including radio frequency, microwave and millimeter-wave arrangements, and related methods are described. According to one aspect, an imaging system includes an antenna array, a position capture system configured to generate position information indicative of locations of one of the antenna array and the target at the first and second moments in time, and wherein the one of the antenna array and the target move between the first and second moments in time, a transceiver configured to control the antenna array to emit electromagnetic energy towards the target and to generate an output that is indicative of the received electromagnetic energy, a data acquisition system configured to generate radar data, processing circuitry configured to process the position information and the radar data to generate image data regarding the target, and an interface configured to use the image data to generate visual images regarding the target.

Sheen, David M.↗
DOE OSTI2025

Multicarrier Spread Spectrum Communications With Noncontiguous Subcarrier Bands for HF Skywave Links

Existing high-frequency (HF) radio platforms offer robust performance against the volatile HF propagation channel. However, the growing traffic across the band contests the reliability of these systems. While techniques to mitigate the effects of narrowband interference have been thoroughly explored, they are insufficient against wideband interference or when the transmission band is occupied by numerous scattered users. To improve reliability in these congested channel conditions, we propose a filter-bank based multicarrier spread-spectrum waveform with noncontiguous subcarrier bands. Using noncontiguous subcarrier bands enables the system to at once leverage the robustness of a wideband system while retaining the frequency agility of a narrowband system. In this study, we modify a filter-bank transmitter structure to accommodate noncontiguous subcarrier bands and consider several immediate impacts of this change, such as elevated peak-to-average-power ratios (PAPRs). A receiver architecture to process the noncontiguous spread-spectrum signal is also introduced, along with details regarding wideband channel estimation. Finally, we develop efficient transmitter and receiver structures to support practical system implementations. We conclude by comparing the performance of contiguous and noncontiguous systems through both simulation and over-the-air testing. The results show that the noncontiguous system remains robust in typical HF channels while significantly outperforming the contiguous system in congested spectral conditions.

(PAPR↗
DOE OSTI2026

Rapid RASER MRI

Conventional Magnetic Resonance Imaging (MRI) relies on high-power Radio-Frequency (RF) pulses to excite nuclear spins and in turn generate NMR signals. These pulses require large high-power RF-amplifiers and cause heat deposition in the tissue, which must be minimized for safety, presenting a growing problem when moving toward ever-higher field MRI. An alternative to RF-pulse excitation is self-excitation of nuclear spins using Radiofrequency Amplification by Stimulated Emission of Radiation (RASER), where the nuclear spins undergo spontaneous transition, without RF excitation, from an over-populated state to a ground state. Here, the feasibility of recording rapid proton RASER MRI images of pyrazine at low concentration (120 mM) with large matrix (128x128 pixels) in as little as 78 ms is demonstrated at 500 MHz (11.7 T). We also recorded a time-series of images using a single bolus hyperpolarized pyrazine highlighting the feasibility of dynamic tracking. Here, the demonstrated approach allows recording MRI scans without transmit-receive electronics of the MRI scanner, which is highly desirable for portable MRI as well as the emerging field of hyperpolarized MRI using, e.g., HP protons, 129 Xe gas or HP 13 C labeled biomolecules as molecular tracers and imaging agents.

MRI↗
DOE OSTI2024

Frontier system-on-chip (SoC) technology for microwave diagnostics (invited)

The next generation of fusion reactors, exemplified by projects such as the Demonstration Power Plant following the International Thermonuclear Experimental Reactor, faces the monumental challenge of proving the viability of generating electricity through thermonuclear fusion. This pursuit introduces heightened complexities in diagnostic methodologies, particularly in microwave-based diagnostics. The increased neutron fluence necessitates significant reductions in vessel penetrations and the elimination of internal diagnostics, posing substantial challenges. SoC technology offers a promising solution by enabling the miniaturization, modularization, integration, and enhancing the reliability of microwave systems. After seven years of research, our team successfully pioneered the V- and W-band system-on-chip approach, leading to the development of active transmitters and passive receiver modules applied in practical settings, notably within the DIII-D tokamak project. Arrays of these modules have supported microwave imaging diagnostics. New physics measurement results from the Electron Cyclotron Emission Imaging system on DIII-D provide compelling evidence of improved diagnostics following the adoption of SoC technology. Furthermore, we achieved a breakthrough in developing an F-band SoC, advancing higher frequency capabilities for fusion devices. These achievements represent a significant leap forward in fusion diagnostic technology, marking substantial progress toward establishing reliable and efficient plasma diagnostics for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A Roadmap for a Lightning Modeling Grand Challenge

This document is a roadmap for building an interconnected model of the physical processes that produce a lightning discharge, and its observable optical and radio signals. We call this a Lightning Modeling Grand Challenge, recognizing that significant effort and coordination of human and financial resources is required to realize the capability. The roadmap serves to outline the coordination of resources necessary to enable stitching together existing knowledge and model components to make a lightning prediction, and to test these predictions with observations. Such a capability does not currently exist. The roadmap is motivated not only by a spirit of scientific inquiry, but by practical challenges faced by US Federal and societal stakeholders. Advancements in lightning observations have outpaced our tests of integrated understanding, leaving many stakeholders unsure how to design their missions to properly detect and discriminate lightning, and unsure how to apply the sometimes-disagreeing lightning signals from diverse instruments. The time is right to connect existing theories and models to support stakeholders in understanding the signals they observe, for needs as diverse as climate monitoring, national security, weather forecasting, public safety, and protection of natural and built environments. The roadmap’s two main technical sections describe the components of a linked physical model, followed by a description of models of lightning signals and sensors that are driven by outputs from the physical model. The goal is to predict the time-varying physical properties of lightning that are self-consistent with the thunderstorm’s structure and dynamics. These lightning signals then propagate through the storm, with realistic dispersion and attenuation, to receivers on the ground or in space. At a high level, the model begins with weather (cloud) model output, including explicit prediction of the electrification of cloud particles. The cloud’s electrical structure drives a model of lightning physics, from initiation, through channel development, and discharges along those channels. Key lightning parameters, such as the temperature and currents in the channel, and their space and time distribution, are then used to produce optical and electromagnetic signal sources that propagate to modeled receivers. This architecture therefore generates a dataset suitable for comparison to existing and envisioned observing systems. The need for additional measurements and field campaigns to support model development is described. In each model sub-component, inputs, outputs, uncertainties, evaluation methods, and next steps are summarized, interleaved with references to the scientific literature. Identifying boundaries between the model sub-components aids in segmenting an integrated, complex model into practical work packages and system sub-components, allowing a diverse team to contribute and maintain the system. We estimate that at least five years of effort and a $\$$10M initial investment is necessary to make a significant step forward. Mechanisms to facilitate community coordination, including annual workshops and open-source code repositories, are described.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Bayesian Learning Approach to Wireless Outdoor Heatmap Construction using Deep Gaussian Process

We present a novel Bayesian learning approach to outdoor radio heatmap construction utilizing deep Gaussian process (GP). The proposed approach employs a two-layer hierarchy which consists of two cascaded Gaussian processes that are capable of modeling more complex input-output relations than standard single-layer Gaussian processes. Since deriving the exact model likelihood is challenging, a lower bound is optimized instead so that gradient descent-based methods can be performed to find out the optimal model parameters. Typically, inducing points are used in GPs to facilitate low-rank approximation of covariance (kernel) matrices for computation speedup. However, the inaccuracy induced by inducing points can accumulate when stacking multiple layers of GP which may hinder the performance of deep GP. Moreover, since inducing points need to be learned, having them at all layers of deep GP also incurs computational burden. To overcome the above challenges, in contrast to the canonical deep GP model, we use a modified architecture where a full standard GP resides in the first layer and inducing points are only introduced for the second layer. This modified architecture strikes a balance between model accuracy and training complexity. In the proposed model, the noise parameter of the first GP layer is also eliminated to improve the training efficiency as the noise parameter at the output of the second layer suffices to model the uncertainty in the output. The proposed approach is evaluated on real-world datasets, in the form of location-Received Signal Strength (RSS) pairs, collected from the Platform for Open Wireless Data-driven Experimental Research (POWDER) located at the campus of the University of Utah. Experiment results show that the proposed approach can achieve smaller prediction errors on various training and testing data configurations than DNN-based and GP-based methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗