Search NASA⌕ Search

SEARCH · Search NASA

Results for “RANS simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Combined Experimental/Numerical Study of the Soot Formation Process in a Gasoline Direct-Injection Spray in the Presence of Laser-Induced Plasma Ignition

Here, combustion issued from an eight-hole, direct-injection spray was experimentally studied in a constant-volume pre-burn combustion vessel using simultaneous high-speed diffused back-illumination extinction imaging (DBIEI) and OH* chemiluminescence. DBIEI has been employed to observe the liquid-phase of the spray and to quantitatively investigate the soot formation and oxidation taking place during combustion. The fuel-air mixture was ignited with a plasma induced by a single-shot Nd:YAG laser, permitting precise control of the ignition location in space and time. OH* chemiluminescence was used to track the high-temperature ignition and flame. The study showed that increasing the delay between the end of injection and ignition drastically reduces soot formation without necessarily compromising combustion efficiency. For long delays between the end of injection and ignition (1.9 ms) soot formation was eliminated in the main downstream charge of the fuel spray. However, poorly atomized and large droplets formed at the end of injection (dribble) eventually do form soot near the injector even when none is formed in the main charge. The quantitative soot measurements for these spray and ignition scenarios, resolved in time and space, represents a significant new achievement. Reynolds-averaged Navier-Stokes (RANS) simulations were performed to assess spray mixing and combustion. An analysis of the predicted fuel-air mixture in key regions, defined based upon experimental observations, was used to explain different flame propagation speeds and soot production tendencies when varying ignition timing. The mixture analysis indicates that soot production can be avoided if the flame propagates into regions where the equivalence ratio (Φ) is already below 2. Reactive RANS simulations have also been performed, but with a poor match against the experiment, as the flame speed and heat-release rate are largely over estimated. This modeling weakness appears related to a very high level of turbulent viscosity predicted for the high-momentum spray in the RANS simulations, which is an important consideration for modeling ignition and flame propagation in mixtures immediately created by the spray.

42 ENGINEERING↗
DOE OSTI2021

A physics-informed data-driven low order model for the wind velocity deficit at the wake of isolated buildings

Detailed simulations of the Atmospheric boundary layer (ABL) provides information on wind velocity, direction and turbulence for optimizing the design of wind turbines and wind farms and their operations. Distributed wind turbines have been considered for use in urban or suburban areas for covering energy needs using a sustainable energy solution. Simulations of high Reynolds number turbulent ABL flows past obstacles can be used for the prediction of the velocity deficit and turbulence characteristics in the leeward side of building-like obstacles, allowing for the estimation of power losses and fatigue loads in wind turbines. However, fully three-dimensional simulations of high Reynolds number ABL flows using Large Eddy Simulation (LES) or Reynolds Average Navier-Stokes Simulations (RANS) continue to require large computational/ execution times. As a result, these 3D simulations may not be ideal tools for the rapid assessment of wind energy potential. In the present study, 3D numerical results from wall resolved RANS simulations were used for the development of a low order model that allows the rapid assessment of wind velocity and turbulence in the leeward side of an isolated building.

17 WIND ENERGY↗
DOE OSTI2021

Review and Analysis of Heat Transfer Correlations For Horizontal Pseudocritical CO 2 Heat Exchanger Applications

There is significant interest in the development of supercritical carbon dioxide (sCO 2 ) power cycles because of the potential for smaller and more energy efficient systems than a steam Rankine cycle. Heat exchanger designs typically use empirical correlations, but the applicability of these correlations near the CO 2 critical point is a potential issue. Though numerous correlations have been proposed in the literature, there are some disagreements when it comes to the accuracy. The current work recognizes the role of thermophysical properties, and its impacts on the heat transfer correlations and cycle efficiency. Heat transfer correlations proposed for horizontal flow inside circular pipes were analyzed with the help of numerical simulations. Steady state RANS simulations were performed using SST k-w turbulence model to evaluate the Nusselt number empirical correlations. It was found that the most of correlations (except Yoon) produced a Nusselt number that differed significantly with the one predicted numerically. Some of the correlations were developed for pure forced convection regime and as mentioned in Lin et al. do not account for mixed convection or free convection effects. Based on the limited observation, it appears that Yoon et al. predictions match well with the numerically predicted Nusselt Numbers. However, further analysis is required understand the applicability of various correlations and is contingent on accurate measurements or predictions of wall temperature profiles in the axial and the circumferential directions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2017

An ODE-Based Wall Model for Turbulent Flow Simulations

Fully automated meshing for Reynolds-Averaged Navier-Stokes Simulations, Mesh generation for complex geometry continues to be the biggest bottleneck in the RANS simulation process; Fully automated Cartesian methods routinely used for inviscid simulations about arbitrarily complex geometry; These methods lack of an obvious & robust way to achieve near wall anisotropy; Goal: Extend these methods for RANS simulation without sacrificing automation, at an affordable cost; Note: Nothing here is limited to Cartesian methods, and much becomes simpler in a body-fitted setting.

Wall Model↗
DOE OSTI2025

Multidimensional Modeling of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Optical Engine With Direct Injection

Hydrogen (H 2 ), as a carbon-free fuel, is considered as one of the most promising solutions to reduce the carbon footprint of hard-to-decarbonize energy and transportation sectors. As such, hydrogen-fueled internal combustion engines (H 2 ICEs) have recently been receiving increasing attention, particularly in applications such as on-road/off-road heavy-duty transport and combined heat and power. The direct injection (DI) of gaseous hydrogen into the combustion chamber offers great potential for achieving high power density and high engine efficiency, while mitigating the risk of backfire and reducing pre-ignition. However, the numerical simulation of H 2 DI system remains a formidable challenge associated with the high computational cost of reproducing compressible supersonic flow and shocks in narrow injector passages and in near-nozzle regions. In general, there is a lack of well-established and validated practices for the modeling of high-pressure H 2 DI in large-bore engines. Here, to this end, this study focuses on computational fluid dynamics (CFD) modeling of the mixture formation process in a heavy-duty optical engine employing a medium-pressure H 2 DI system. Both large eddy simulations (LES) and Reynolds Averaged Navier–Stokes (RANS) simulations are performed and evaluated against optical data. Gaseous hydrogen is injected into the combustion chamber via a centrally located outward opening hollow-cone injector at a pressure of 40 bar. Simulations are carried out for two injection timings, namely, −120 and −60 °CA. The numerical predictions for H 2 distribution in different horizontal and vertical planes during the compression stroke are systematically compared against optical data obtained through planar laser-induced fluorescence (PLIF) measurements. Overall, the LES approach using the Dynamic Structure model is found to have good predictive capabilities for the early jet penetration in terms of length and shape, as well as the later H 2 distributions. However, the unsteady RANS approach with the renormalization group $k - ϵ$ model, which is widely used by industry to model heavy-duty ICEs, significantly underpredicts the H 2 mixing, even at similar mesh resolution to that used in LES. These results indicate that there is a need for the improvement of mixing submodels within the RANS approach when applied to H 2 DI simulations.

LES↗
NASA NTRS2000

Towards LES Models of Jets and Plumes

As pointed out by Rodi standard integral solutions for jets and plumes developed for discharge into infinite, quiescent ambient are difficult to extend to complex situations, particularly in the presence of boundaries such as the sea floor or ocean surface. In such cases the assumption of similarity breaks down and it is impossible to find a suitable entrainment coefficient. The models are also incapable of describing any but the most slowly varying unsteady motions. There is therefore a need for full time-dependent modeling of the flow field for which there are three main approaches: (1) Reynolds averaged numerical simulation (RANS), (2) large eddy simulation (LES), and (3) direct numerical simulation (DNS). Rodi applied RANS modeling to both jets and plumes with considerable success, the test being a match with experimental data for time-averaged velocity and temperature profiles as well as turbulent kinetic energy and rms axial turbulent velocity fluctuations. This model still relies on empirical constants, some eleven in the case of the buoyant jet, and so would not be applicable to a partly laminar plume, may have limited use in the presence of boundaries, and would also be unsuitable if one is after details of the unsteady component of the flow (the turbulent eddies). At the other end of the scale DNS modeling includes all motions down to the viscous scales. Boersma et al. have built such a model for the non-buoyant case which also compares well with measured data for mean and turbulent velocity components. The model demonstrates its versatility by application to a laminar flow case. As its name implies, DNS directly models the Navier-Stokes equations without recourse to subgrid modeling so for flows with a broad spectrum of motions (high Re) the cost can be prohibitive - the number of required grid points scaling with Re(exp 9/4) and the number of time steps with Re(exp 3/4). The middle road is provided by LES whereby the Navier-Stokes equations are formally filtered with the filter chosen to only exclude the smallest turbulent motions. If successful, LES should provide much of the detail available to DNS but at more bearable cost. Fatica et al. in comparing LES with DNS for a low Reynolds number jet showed that the LES could simulate the temporally evolving behavior including growth of the jet thickness. It is the intention of this report to explore the application of an LES model to jets and plumes. As always, before tackling complex situations, the model must be tested for the simplest of cases and so we address only two, a non-buoyant axisymmetric jet issuing steadily from an orifice into a semi-infinite stationary environment and a buoyant jet in the same environment. The work is a continuation of Basu and Mansour.

Webb, A. T.↗
NASA NTRSDate not supplied

A Large-Eddy Simulation Of Turbulent Flow Over A Backward Facing Step

Large-eddy simulation (LES) was used to study the turbulent flow over a backward facing step. The simulations examine the details of the turbulent flow's separated and reattaching regions created by the step geometry. An explicit high-order of accuracy/high resolution finite-difference computational fluid dynamics solver was used for both LES and Reynolds-averaged Navier-Stokes (RANS) simulations. The experimental data from the backward facing step experiment of Driver and Seegmiller was used for comparison. Data presented are derived from a RANS simulation using the Spalart-Allmaras turbulence model and LES simulations using the implict LES assumption on three different grids of varying resolution. The RANS solution agrees with past work. It does an adequate job of predicting the flowfield and reattachment point, but misses details such as the strength of the recirculating region and magnitudes of the Reynolds stresses. The synthetic eddy method was used to provide a turbulent inflow to the quasi-2D LES domains. For the LES, the coarse grid was of insufficient resolution and under-predicted the skin friction coefficient and over-predicted the normal stresses. The finer grid LES results accurately predict the skin friction coefficient and provide more accurate Reynolds stresses. Triple product velocity correlations are also computed from the LES and the finer grid results did a good job predicting the magnitudes of the curves and the shapes were reasonably represented. It is recommended that future work include investigating the turbulent inflow domain length, width of the quasi-2D domain, and additional grid refinement.

turbulence↗
NASA NTRSDate not supplied

A Large-Eddy Simulation Of Turbulent Flow Over A Backward Facing Step

Large-eddy simulation (LES) was used to study the turbulent flow over a backward facing step. The simulations examine the details of the turbulent flow’s separated and reattaching regions created by the step geometry. An explicit high-order of accuracy/high resolution finite-difference computational fluid dynamics solver was used for both LES and Reynolds-averaged Navier-Stokes (RANS) simulations. The experimental data from the backward facing step experiment of Driver and Seegmiller was used for comparison. Data presented are derived from a RANS simulation using the Spalart-Allmaras turbulence model and LES simulations using the implicit LES assumption on three different grids of varying resolution. The RANS solution agrees with past work. It does an adequate job of predicting the flowfield and reattachment point, but misses details such as the strength of the recirculating region and magnitudes of the Reynolds stresses. The synthetic eddy method was used to provide a turbulent inflow to the quasi-2D LES domains. For the LES, the coarse grid was of insufficient resolution and under-predicted the skin friction coefficient and over-predicted the normal stresses. The finer grid LES results accurately predict the skin friction coefficient and provide more accurate Reynolds stresses. Triple product velocity correlations are also computed from the LES and the finer grid results did a good job predicting the magnitudes of the curves and the shapes were reasonably represented. It is recommended that future work include investigating the turbulent inflow domain length, width of the quasi-2D domain, and additional grid refinement

turbulence↗
NASA NTRS2016

Design and Analyses of High Aspect Ratio Nozzles for Distributed Propulsion Acoustic Measurements

A series of three convergent, round-to-rectangular high aspect ratio (HAR) nozzles were designed for acoustic testing at the NASA Glenn Research Center Nozzle Acoustic Test Rig (NATR). The HAR nozzles had exit area aspect ratios of 8:1, 12:1, and 16:1. The nozzles were designed to mimic a distributed propulsion system array with a slot nozzle. The nozzle designs were screened using Reynolds-Averaged Navier-Stokes (RANS) simulations. In addition to meeting the geometric constraints required for testing in the NATR, the HAR nozzles were designed to be free of flow features that would produce unwanted noise (e.g., flow separations) and to have uniform flow at the nozzle exit. Multiple methods were used to generate HAR nozzle designs. The final HAR nozzle designs were generated in segments using a computer code that parameterized each segment. RANS screening simulations showed that intermediate nozzle designs suffered flow separation, a normal shockwave at the nozzle exit (caused by an aerodynamic throat produced by boundary layer growth), and non-uniform flow at the nozzle exit. The RANS simulations showed that the final HAR nozzle designs were free of flow separations, but were not entirely successful at producing a fully uniform flow at the nozzle exit. The final designs suffered a pair of counter-rotating vortices along the outboard walls of the nozzle. The 16:1 aspect ratio HAR nozzle had the least uniform flow at the exit plane; the 8:1 aspect ratio HAR nozzles had a fairly uniform flow at the nozzle exit plane.

acoustic measure↗
DOE OSTI2022

Hybrid RANS-LES of the Atmospheric Boundary Layer for Wind Farm Simulations: Preprint

Wind farm simulations often do not accurately represent wake-atmospheric boundary layer (ABL) interactions, blade boundary layer (BL) dynamics, and turbine-turbine interactions. In this work, we use Active Model Split (AMS), a new hybrid Reynolds-Averaged Navier Stokes (RANS)-large eddy simulation (LES) model, which is well suited to capture these effects because the model can (i) accurately simulate the ABL with the Coriolis effect, (ii) is accurate in adverse pressure gradients such as those near wind turbine blades, and (iii) has sufficiently low computational cost to simulate multiple turbines while resolving the blade BL. For simplicity and consistency we develop AMS to be used throughout the domain rather than in a zonal method. We implement our work in the massively parallel flow solver, Nalu-Wind, so that our model can access the compute resources needed for blade-resolved simulations of multiple wind turbines. To accomplish these aims, we modify the baseline AMS by changing the RANS contribution to SST k - omega with a length scale limiter, adding the Coriolis effect, and developing an appropriate wall treatment. We show that AMS of the ABL with the Coriolis effect matches LES reference results better than those obtained with RANS. We describe our plans to add buoyancy effects and wind turbines to our AMS simulations.

atmospheric boundary layer↗
NASA NTRSDate not supplied

USM3D-ME Contributions to the 5th AIAA High Lift Prediction Workshop

This paper presents the results of Reynolds-averaged Navier-Stokes (RANS) simulations conducted by the NASA flow solver, mixed-element USM3D (USM3D-ME), for the 5th AIAA High-Lift Prediction Workshop. As part of the Fixed-Grid RANS Technology Focus Group (TFG), these simulations were performed to assess the accuracy and efficiency of the USM3D-ME solutions in predicting high-lift flows. The High-Lift Common Research Model (CRM-HL) served as the primary geometry. Several CRM-HL configurations were used for three case studies: a verification study (Case 1), a configuration buildup study (Case 2), and a Reynolds-number variation study (Case 3). Overall, USM3D-ME RANS results aligned with the solutions selected by the Fixed-Grid RANS TFG and available wind tunnel data. Simulations for Case 1 and Configuration 2.1 achieved machine-zero residual convergence, with aerodynamic coefficients converging to steady-state values. However, Configurations 2.2-2.4 and Case 3 encountered iterative- and grid-convergence challenges, particularly at high angles of attack. Compared with the experimental data available for Configurations 2.2-2.4, close agreement was demonstrated at low angles of attack. However, for angles of attack approaching the maximum lift conditions, the predicted lift coefficient and pitching moment deviated from experimental values. The drag-coefficient predictions were in relatively good agreement, however, slight overpredictions were observed at the highest angle of attack corresponding to the maximum-lift condition. Although iterative convergence for Configurations 2.2-2.4 at high angles of attack remains a persistent challenge, averaging aerodynamic coefficients over the last 5000 iterations yielded satisfactory agreement with the available wind tunnel experimental data. During the workshop, the lack of iterative convergence was attributed to the vortex structures emanating from the slat brackets. To investigate this issue further, post-workshop simulations were conducted on Configuration 2.2. In one study, RANS simulations were performed on a simplified geometry with the slat brackets removed. The second study focused on performing unsteady RANS (URANS) simulations on the original Configuration 2.2 geometry. Preliminary results from both studies are presented and compared with wind tunnel data for Configuration 2.2. Consistent with the findings of other participants in the Fixed-Grid RANS TFG, this study emphasizes the necessity for further exploration and advancement in RANS technology for predicting high-lift flows.

Aerodynamics↗
NASA NTRSDate not supplied

USM3D-ME Contributions to the 5th AIAA High Lift Prediction Workshop

This paper presents the results of Reynolds-averaged Navier-Stokes (RANS) simulations conducted by NASA’s flow solver, mixed-element USM3D (USM3D-ME), for the 5th AIAA High-Lift Prediction Workshop. As part of the Fixed-Grid RANS Technology Focus Group (TFG), these simulations were performed to assess the accuracy and efficiency of the USM3D-ME solutions in predicting high-lift flows. The High-Lift Common Research Model (CRM-HL) served as the primary geometry. Several CRM-HL configurations were used for three case studies: a verification study (Case 1), a configuration buildup study (Case 2), and a Reynolds-number variation study (Case 3). Overall, USM3D-ME RANS results aligned with the solutions selected by the Fixed-Grid RANS TFG and available wind tunnel data Simulations for Cases 1 and Configuration 2.1 achieved machine-zero residual convergence, with aerodynamic coefficients converging to steady-state values. However, Configurations 2.2-2.4 and Case 3 encountered iterative- and grid-convergence challenges, particularly at high angles of attack. Compared with the experimental data available for Configurations 2.2-2.4, close agreement was demonstrated at low angles of attack. However, for angles of attack approaching the maximum lift conditions, the predicted lift coefficient and pitching moment deviated from experimental values. The drag-coefficient predictions were in a relatively good agreement, however, slight overpredictions were observed at the highest angle of attack corresponding to the maximum-lift condition. Although iterative convergence for Configurations 2.2-2.4 at high angles of attack remains a persistent challenge, averaging aerodynamic coefficients over the last 5000 iterations yielded satisfactory agreement with the available wind tunnel experimental data. During the workshop, the lack of iterative convergence was attributed to the vortex structures emanating from the slat brackets. To investigate this issue further, post-workshop simulations were conducted on Configuration 2.2. In one study, RANS simulations were performed on a simplified geometry with the slat brackets removed. The second study focused on performing URANS simulations on the original Configuration 2.2 geometry. Preliminary results from both studies are presented and compared with wind tunnel data for Configuration 2.2. Consistent with the findings of other participants in the Fixed-Grid RANS TFG, this study emphasizes the necessity for further exploration and advancement in RANS technology for predicting high-lift flows.

CFD↗
DOE OSTI2022

Modeling of Cube Array Roughness: RANS, Large Eddy Simulation, and Direct Numerical Simulation

Abstract Flow over arrays of cubes is an extensively studied model problem for rough wall turbulent boundary layers. While considerable research has been performed in computationally investigating these topologies using direct numerical simulation (DNS) and large eddy simulation (LES), the ability of sublayer-resolved Reynolds-averaged Navier–Stokes (RANS) to predict the bulk flow phenomena of these systems is relatively unexplored, especially at low and high packing densities. Here, RANS simulations are conducted on six different packing densities of cubes in aligned and staggered configurations. The packing densities investigated span from what would classically be defined as isolated, up to those in the d-type roughness regime, filling in the gap in the present literature. Three different sublayer-resolved turbulence closure models were tested for each case: a low Reynolds number k–ϵ model, the Menter k–ω SST model, and a full Reynolds stress model. Comparisons of the velocity fields, secondary flow features, and drag coefficients are made between the RANS results and existing LES and DNS results. There is a significant degree of variability in the performance of the various RANS models across all comparison metrics. However, the Reynolds stress model demonstrated the best accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities.

Engineering↗
DOE OSTI2021

Large-Eddy Simulation of Laser-Ignited Direct Injection Gasoline Spray for Emission Control

Large-Eddy Simulations (LES) of a gasoline spray, where the mixture was ignited rapidly during or after injection, were performed in comparison to a previous experimental study with quantitative flame motion and soot formation data [SAE 2020-01-0291] and an accompanying Reynolds-Averaged Navier–Stokes (RANS) simulation at the same conditions. The present study reveals major shortcomings in common RANS combustion modeling practices that are significantly improved using LES at the conditions of the study, specifically for the phenomenon of rapid ignition in the highly turbulent, stratified mixture. At different ignition timings, benchmarks for the study include spray mixing and evaporation, flame propagation after ignition, and soot formation in rich mixtures. A comparison of the simulations and the experiments showed that the LES with Dynamic Structure turbulence were able to capture correctly the liquid penetration length, and to some extent, spray collapse demonstrated in the experiments. For early and intermediate ignition timings, the LES showed excellent agreement to the measurements in terms of flame structure, extent of flame penetration, and heat-release rate. However, RANS simulations (employing the common G-equation or well-stirred reactor) showed much too rapid flame spread and heat release, with connections to the predicted turbulent kinetic energy. With confidence in the LES for predicted mixture and flame motion, the predicted soot formation/oxidation was also compared to the experiments. The soot location was well captured in the LES, but the soot mass was largely underestimated using the empirical Hiroyasu model. An analysis of the predicted fuel–air mixture was used to explain different flame propagation speeds and soot production tendencies when varying ignition timing.

42 ENGINEERING↗
DOE OSTI2023

Mixing in Low Reynolds Number Reacting Impinging Jets in Crossflow

Previous efforts to model uranyl fluoride formation in an impinging jet gas reactor underpredicted spatial mixing and overpredicted chemical conversion into particulates. The previous fluid dynamics model was based on the solution of the Reynolds Averaged Navier Stokes equations. After simulating fluid dynamics, aerosol dynamics were superimposed onto CFD-simulated gas reactant species concentrations. The current work explores the influence of complex unsteady flow features on the overall flow physics and chemistry for a low Reynolds number, opposed flow, impinging jet gas reactor where there is a low Reynolds number cross flow. The objective of this study was to assess the impact of model formulation on scalar mixing and transport. Here, transient flow simulations were performed using Scale Resolving Simulations. Large-Eddy Simulations with the dynamic Smagorinsky turbulence model were performed along with simulations which directly resolved the flow. Average and root-mean-square (RMS) velocities and species concentrations were computed along with modeled and resolved turbulence kinetic energy (TKE), modeled turbulence dissipation, and modeled turbulent viscosity. Lagrangian flow tracers were also used to quantify species concentrations along path lines emanating from the jet tips. Transient simulation data were compared to results from RANS simulations using the k-ω shear stress transport (SST) model and Reynolds Stress Model (RSM). Transient simulations showed spatial mixing patterns which were more consistent with experimental data and helped elucidate the process of particle formation observed in experiments.

42 ENGINEERING↗
NASA NTRSDate not supplied

Turbulent Simulations of Cooling Jets in Crossflow

Turbulent flow simulations were completed of the THX-III single hole film cooling experiment performed at NASA Glenn Research Center (GRC). Two different Large-Eddy Simulation (LES) approaches were completed along with a RANS based study. The first LES approach utilizes the Flux Reconstruction (FR) based finite element code GFR, while the second approach makes use of the compact difference solver FDL3DI. Both LES codes were run on grids larger than 1.5 Billion degrees of freedom (DoF). The RANS simulations used FUN3D and included a grid convergence as a turbulence closure study. A summary of the computational approaches and key findings are presented along with the experimental measurements. Significant progress has been made towards the completion of this work, as all but one simulation have been completed. The preliminary findings have shown the LES approaches have excellent agreement with each other, and closely follow the trends of the experiment. The Reynolds stress RANS closure, while the best of the RANS results, had difficulty matching the results of the LES and experimental measurements.

High-Order Methods↗
NASA NTRS2016

Detached Eddy Simulation of Flap Side-Edge Flow

Detached Eddy Simulation (DES) of flap side-edge flow was performed with a wing and half-span flap configuration used in previous experimental and numerical studies. The focus of the study is the unsteady flow features responsible for the production of far-field noise. The simulation was performed at a Reynolds number (based on the main wing chord) of 3.7 million. Reynolds Averaged Navier-Stokes (RANS) simulations were performed as a precursor to the DES. The results of these precursor simulations match previous experimental and RANS results closely. Although the present DES simulations have not reached statistical stationary yet, some unsteady features of the developing flap side-edge flowfield are presented. In the final paper it is expected that statistically stationary results will be presented including comparisons of surface pressure spectra with experimental data.

Simulation↗
NASA NTRSDate not supplied

Numerical Simulations of an Axisymmetric Shock-Wave/Boundary-Layer Interaction

A series of Reynolds-averaged Navier-Stokes (RANS) simulations were performed of two Mach 2.5 axisymmetric shock-wave/boundary-layer interactions (SWBLIs) based off of the NASA Turbulent Computational Fluid Dynamics Validation Experiment (TCFDVE). The goals of the simulations were to (1) determine how well RANS can predict the flow physics of an axisymmetric SWBLI and (2) generate a new validation case for the NASA Turbulence Modeling Resource (TMR). The simulations were run with two different turbulence models and three different computational fluid dynamics (CFD) codes while looking at two different conical shock generator angles, one of which was shown to cause flow separation in the experiment. The results in this paper show that, as expected, the CFD simulations agreed well with each other and the experiment when SWBLI-induced separation was not present. When separation was present, differences in the predicted separation characteristics were noted. These included a stronger interaction and subsequently longer separation extent for the Menter Shear-Stress Transport k-ω (SST) turbulence model simulations compared to both the Spalart-Allmaras (SA) turbulence model simulations and the experiment.

Computational Fluid Dynamics↗