Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROSCO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Assessment of Constitutive and Stability Behavior of Sands Under Plane Strain Condition

A series of biaxial (plane strain) experiments were conducted on three sands under low (15 kPa) and high (100 kPa) confining pressure conditions to investigate the effects of specimen density, confining pressure, and sand grains size and shape on the constitutive and stability behavior of granular materials. The three sands used in the experiments were fine, medium, and coarse-grained uniform silica sands with rounded, sub-angular, and angular grains, respectively. Specimen deformation was readily monitored and analyzed with the help of a grid pattern imprinted on the latex membrane. The overall stress-strain behavior is strongly dependent on the specimen density, confining pressure, sand grain texture, and the resulting failure mode(s). That became evident in different degrees of softening responses at various axial strains. The relationship between the constitutive behavior and the specimens' modes of instability is presented. The failure in all specimens was characterized by two distinct and opposite shear bands. It was found that the measured dilatancy angles increase as the sand grains' angularity and size increase. The measured shear band inclination angles are also presented and compared with classical Coulomb and Roscoe solutions.

Alshibli, Khalid A.↗

Paleosols and the evolution of atmospheric oxygen: a critical review

A number of investigators have used chemical profiles of paleosols to reconstruct the evolution of atmospheric oxygen levels during the course of Earth history (Holland, 1984, 1994; Kirkham and Roscoe, 1993; Ohmoto, 1996). Over the past decade Holland and his co-workers have examined reported paleosols from six localities that formed between 2.75 and 0.45 Ga. They have found that the chemical profiles of these paleosols are consistent with a dramatic change in atmospheric PO2 between 2.2 and 2.0 Ga from < or = 0.002 to > or = 0.03 atm (Holland, 1994). Ohmoto (1996) examined chemical data from twelve reported paleosols ranging in age from 2.9 to 1.8 Ga. He concluded that these chemical profiles indicate that atmospheric PO2 has not changed significantly during the past 3.0 Ga. We seek to resolve the conflict between these reconstructions through a broader examination of the paleosol literature, both to determine which reported paleosols can be definitively identified as such and to determine what these definite paleosols tell us about atmospheric evolution. We here review reports describing over 50 proposed paleosols, all but two are older than 1.7 Ga. Our review indicates that 15 of these reported paleosols can be definitively identified as ancient soils. The behavior of iron uring the formation of these 15 paleosols provides both qualitative and semiquantitative information about the evolution of the redox state of the atmosphere. Every definitely identified pre-2.44 Ga paleosol suffered significant Fe loss during weathering. This loss indicates that atmospheric PO2 was always less than about 5 x l0(-4) atm prior to 2.44 Ga. Analysis of the Hokkalampi paleosol (2.44-2.2 Ga) (Marmo, 1992) and the Ville Marie paleosol (2.38-2.215 Ga) (Rainbird, Nesbitt, and Donaldson, 1990) yield ambiguous results regarding atmospheric PO2. Loss of Fe during the weathering of the 2.245 to 2.203 Ga Hekpoort paleosol (Button, 1979) indicates that atmospheric PO2 was less than 8 x 10(-4) atm shortly before 2.2 Ga. The presence of red beds immediately overlying the Hokkalampi, Ville Marie, and Hekpoort paleosols suggests that by about 2.2 Ga there was an unquantified but substantial amount of oxygen in the atmosphere. Iron loss was negligible during formation of the 2.2 to 2.0 Ga Wolhaarkop (Holland and Beukes, 1990) and Drakenstein (Wiggering and Beukes, 1990) paleosols and during formation of all the later paleosols we previewed. Thus, atmospheric PO2 probably has been > or = 0.03 atm since sometime between 2.2 and 2.0 Ga.

Review, Academic↗

The Virtual Environment for Reactor Applications (VERA): Design and architecture

VERA, the Virtual Environment for Reactor Applications, is the system of physics capabilities being developed and deployed by the Consortium for Advanced Simulation of Light Water Reactors (CASL). CASL was established for the modeling and simulation of commercial nuclear reactors. VERA consists of integrating and interfacing software together with a suite of physics components adapted and/or refactored to simulate relevant physical phenomena in a coupled manner. VERA also includes the software development environment and computational infrastructure needed for these components to be effectively used. We describe the architecture of VERA from both software and numerical perspectives, along with the goals and constraints that drove major design decisions, and their implications. We explain why VERA is an environment rather than a framework or toolkit, why these distinctions are relevant (particularly for coupled physics applications), and provide an overview of results that demonstrate the use of VERA tools for a variety of challenging applications within the nuclear industry.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CHOD/BVAM Chemotherapy and Whole-Brain Radiotherapy for Newly Diagnosed Primary Central Nervous System Lymphoma

Purpose: To assess the efficacy and toxicity of chemotherapy consisting of cyclophosphamide, doxorubicin (Adriamycin), vincristine, and dexamethasone (CHOD) plus bis-chloronitrosourea (BCNU), cytosine arabinoside, and methotrexate (BVAM) followed by whole-brain irradiation (WBRT) for patients with primary central nervous system lymphoma (PCNSL). Methods and Materials: Patients 70 years old and younger with newly diagnosed, biopsy-proven PCNSL received one cycle of CHOD followed by two cycles of BVAM. Patients then received WBRT, 30.6 Gy, if a complete response was evoked, or 50.4 Gy if the response was less than complete; both doses were given in 1.8-Gy daily fractions. The primary efficacy endpoint was 1-year survival. Results: Thirty-six patients (19 men, 17 women) enrolled between 1995 and 2000. Median age was 60.5 years (range, 34 to 69 years). Thirty (83%) patients had baseline Eastern Cooperative Oncology Group performance scores of 0 to 1. All 36 patients were eligible for survival and response evaluations. Median time to progression was 12.3 months, and median survival was 18.5 months. The percentages of patients alive at 1, 2, and 3 years were 64%, 36%, and 33%, respectively. The best response was complete response in 10 patients and immediate progression in 7 patients. Ten (28%) patients had at least one grade 3 or higher neurologic toxicity. Conclusions: This regimen did improve the survival of PCNSL patients but also caused substantial toxicity. The improvement in survival is less than that reported with high-dose methotrexate-based therapies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

CTF: A modernized, production-level, thermal hydraulic solver for the solution of industry-relevant challenge problems in pressurized water reactors

CTF is a thermal hydraulic (T/H) subchannel tool that has been extensively developed over the past ten years as part of the Consortium for Advanced Simulation of Light Water Reactors (CASL) program. The code was selected early in the CASL program for support of high-impact challenge problems that were found to be relevant to the nuclear industry and its currently operating fleet of pressurized water reactors (PWRs), including issues such as departure from nucleate boiling (DNB), crud-induced power shifts (CIPSs), and reactivity-insertion accidents (RIAs). By incorporating CTF into the multiphysics Virtual Environment for Reactor Application (VERA) core simulator software developed by CASL, CTF has become the primary means of providing fluid and fuel thermal feedback, as well as T/H figure-of-merits (FOMs) in large-scale reactor simulations. With the goal of solving industry challenge problems, CASL placed great emphasis on developing high-quality, high-performance, validated software tools that offer higher fidelity than what is currently possible with current industry methods. In support of this effort, CTF was developed from a research tool into an nuclear quality assurance (NQA-1)–compliant, production-level software tool that is capable of addressing the stated challenge problems and goals of CASL. This work presents a review of the major technological achievements that were realized in developing CTF over the past decade of the CASL program and presents an overview of the code solution approach and closure models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nonlinear interaction between ions and multiple electrostatic waves

The nonlinear interaction of ions with multiple electrostatic waves propagating perpendicularly across a uniform magnetic field is investigated both analytically and numerically. Applying a multiscale expansion method with the wave amplitude as the perturbation parameter, a general nonlinear resonance condition is analytically derived. Under this condition, it is confirmed that multiple waves even below the cyclotron frequency and small amplitude are capable of effectively producing acceleration or stochastic heating by numerical simulation. Compared to the single wave situation, the stochastic threshold for heating by multiple waves with frequencies satisfied with a nonlinear resonance condition is significantly reduced because the nonlinear interaction of ions with multiple waves leads more easily to overlapping of islands and spreading of the stochastic layer in phase space. The above result is helpful to understand the energization mechanism of ions in the solar corona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Centrifugal particle confinement in mirror geometry

The use of supersonic rotation of a plasma in mirror geometry has distinct advantages for thermonuclear fusion. The device is steady state, there are no disruptions, the loss cone is almost closed, sheared rotation stabilizes magnetohydrodynamic instabilities as well as plasma turbulence, there are no runaway electrons, and the coil configuration is simple. In this work, we examine the effect of rotation on mirror confinement using a full cyclotron orbit code. The full cyclotron simulations give a much more complete description of the particle energy distribution and losses than the use of guiding center equations. Both collisionless loss as a function of rotation and the effect of collisions are investigated. Although the cross field diffusion is classical, we find that the local rotating Maxwellian is increased to higher energy, increasing the fusion rate and also enhancing the radial diffusion. We find a loss channel not envisioned with a guiding center treatment, but a design can be chosen that can satisfy the Lawson criterion for ions. Of course, the rotation has a minimal effect on the alpha particle birth distribution, so there is initially loss through the usual loss cone, just as in a mirror with no rotation. However after this loss, the alphas slow down on the electrons with little pitch angle scattering until reaching low energy, so over half of the initial alpha energy is transferred to the electrons. The important problem of energy confinement, with losses primarily through the electron channel, is not addressed in this work. In conclusion, we also discuss the use of rotating mirror geometry to produce an ion thruster.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alpha particle channeling in ITER

Alpha particle channeling, the attempt to extract energy from high-energy fusion alpha particles using a combination of high- and low-frequency waves introduced in the plasma with antennae, is studied using a guiding center code. We examine the effect of the combination of cooling caused by a cyclotron mode, particle diffusion due to Alfvén modes introduced for ash removal, the inclusion of microturbulent diffusion, and the slowing down of the alpha particles on electrons. Induced cooling is achieved with a cyclotron resonance, producing additional losses of particles above 3.5 MeV in an amount about equal to the prompt loss. The removal of the low-energy cooled particles by additional modes or by microturbulent diffusion is the hardest challenge for alpha channeling. The cooled alpha particles remain deep in the plasma center, so for this removal, the method used must be capable of providing transport from the plasma center to the edge without also causing losses of high-energy particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle resonances in toroidal fusion devices

Resonances of high energy particles in magnetic confinement devices due to electromagnetic instabilities can strongly modify the distribution, leading to a reduction in fusion power and even discharge termination and particle loss to the device walls through avalanche. The existence of a mode particle resonance depends on properties of the equilibrium, particle trajectories, and perturbation mode harmonic content. Resonance location is a function of particle energy and equilibrium field line helicity. Different methods for finding resonance location and energy dependence are developed. The properties of resonances are discussed using examples from magnetic fusion devices. Here, we show that if mode resonances exist at low particle energy, they very likely also exist at high energy, thus modifying high energy beam particles and fusion products. It is possible for a resonance to appear due to mode induced orbit helicity modification when it is forbidden at low mode amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle resonances in stellarators

Resonances of high energy particles in magnetic confinement devices due to electromagnetic instabilities can strongly modify the particle distribution, leading to a reduction in fusion power and even discharge termination and particle loss to the device walls through an avalanche. The existence of a mode particle resonance depends on the properties of the equilibrium and particle parameters, and their number, location, and density can vary with device design. Recently, the advent of more powerful computing capabilities and advanced theoretical understanding has led to the design of non-axisymmetric devices or stellarators, which could prove to be more advantageous than tokamaks. Stellarators have the advantage of being immune to major disruptions because of the very low plasma current. One of the problems shared by both types of devices is the existence of resonances in particle orbits, which can lead to large amplitude high frequency instabilities and subsequent induced particle loss. We examine the number of resonances, their location, and dependence on particle energy for some stellarator designs.

43 PARTICLE ACCELERATORS↗

Poor confinement in stellarators at high energy

High-energy particle resonances can modify particle distributions and even cause significant particle loss. Resonances can be present in any toroidal confinement device and can easily be found numerically. Many stellarators have weak magnetic shear so that large islands and large chaotic regions can be produced by resonant perturbations with small amplitudes. Additionally, while the choice of the field line helicity profile in the plasma can limit the presence of resonances at low particle energy, the resonance location is energy-dependent, and they can move into the plasma at higher energy. If resonances match the toroidal variation of the equilibrium, they can produce wide islands in the phase space of orbits even in the absence of perturbations due to instabilities. These islands increase in size with particle energy and can seriously affect the confinement of high-energy ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resonant alpha particle loss in stellarators

Particle resonances in stellarators can produce islands in the space of passing particle orbits without the presence of an unstable Alfven mode, provided the period of the resonance matches the period of the equilibrium magnetic field. In this case, the equilibrium itself plays the role of a mode amplitude, and the islands appear on surfaces where the orbital helicity matches the field period. At low energy, these surfaces are given by the field line helicity, but at higher energy, cross field drift causes them to move. The resonances are also felt by trapped particles bouncing back and forth on surfaces with matching helicity. The periodic variation of B along these orbits produces local wells, giving loss due to drift while trapped in a well. Stellarator designs that have equilibrium-induced resonance islands exhibit anomalous alpha particle loss and are unsuitable for reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alfvén mode induced particle loss in LHD

Herein losses of beam ions due to Alfvén modes are simulated for discharges in the Large Helical Device at Toki, Japan, using a guiding center code. High frequency beam particle resonances are found for the equilibria for passing particles, providing locations for the destablization of Alfvén modes observed in the device. Losses due to even small modes due to these resonances are significant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Poor confinement in stellarators at high energy II

This work discusses particle resonances in stellarators. There are two important effects. First, resonances provide locations for Alfvén modes, which can cause significant particle loss. Second, if a resonance matches the period of the modulation of the equilibrium field magnitude it produces islands in particle orbits increasing in size with particle energy, also possibly causing loss. A previous publication suffered from a restriction to the consideration of deeply passing particle orbits, clearly showing the resonance islands. Large particle magnetic moment increases the effect of particle cross field drift, essential for this phenomenon, so passing particles with larger values of magnetic moment give larger islands. It is possible to avoid designs exhibiting such resonances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Guiding center equations for the magnetic dipole

Since the discovery of Van Allen radiation belts in the 1960s, observations of energetic ions trapped in the Earth's dipole magnetic field have illustrated the remarkable confinement properties of this configuration. As such, it has been used for confining a hot plasma for nuclear fusion studies, starting from the pioneering work of Bo Lehnert and Akira Hasegawa, in the Levitated Dipole Experiment (LDX) at MIT until 2011 and in the RT-1 experiment at the University of Tokyo. More recently, the dipole has been subject to a renewed interest for fusion studies by a couple of startups and for smaller applications as a cold plasma source. While the equilibrium and magneto-hydrodynamic stability of the dipole have been investigated quite in detail, neoclassical properties of the dipole are comparatively much less known: the dipole is more known in geophysics than in fusion science. For this reason, in this paper, we propose a set of Hamiltonian, guiding-center equations to describe the motion of electrons and ions in a magnetic dipole configuration. We also developed a code, and we show the main features of particle motion, benchmarking our results with the analytical solutions for the bounce and precession motion, which are well documented in the literature. We also draw some general conclusions for the neoclassical transport in usual toroidal confinement schemes, such as the tokamak and the stellarator, pointing out the unique advantages of the dipole in confining energetic particles.

Hamiltonian mechanics↗

Saturation of Alfvén modes in tokamaks

Here, the growth of Alfvén modes driven unstable by a distribution of high energy particles up to saturation is investigated with a guiding center code, using numerical eigenfunctions produced by linear theory and a numerical high energy particle distribution, in order to make detailed comparison with experiment and with models for saturation amplitudes and the modification of beam profiles. Two innovations are introduced. First, a very noise free means of obtaining the mode-particle energy and momentum transfer is introduced, and secondly, a spline representation of the actual beam particle distribution is used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗