Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROTATING CYLINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Finite-difference multiple fluid solution for source-driven rotation in highly magnetized linear plasma device

The rotation profile of a magnetized plasma cylinder composed of multiple fluids is investigated analytically, expanding on previous results. The analytic steady-state solution is used as a benchmark for a time-dependent multiple-fluid finite-difference code, MITNS: Multiple-Ion Transport Numerical Solver. Magnetic field evolution is taken into account, both analytically and numerically. Its details are shown to be of importance when particles are allowed out of the domain. MITNS reproduces the asymptotic expansion results for a small parameter $δ<<<1$. For $\sqrt{m_elm_i} ~ δ << 1$ , a slightly different regime, dominated by viscosity-induced transport of ions, is found numerically and analytically. Finally, this verification supports the use of this code for more complex time-dependent calculations in the future. Additionally, we derive the angular velocity profile of each species due to radial particle and charge fluxes of various strengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Torus geometry eigenfunctions of an interacting multi-Landau-level Hamiltonian

A short-ranged, rotationally symmetric multi-Landau-level model Hamiltonian for strongly interacting electrons in a magnetic field was proposed [A. Anand et al., Phys. Rev. Lett. 126, 136601 (2021)] with the key feature that it allows exact many-body eigenfunctions on the disk not just for quasiholes but for all charged and neutral excitations of the entire Jain sequence filling fractions. We extend this to geometries without full rotational symmetry, namely, the torus and cylinder geometries, and present their spectra. Exact diagonalization of the interaction on the torus produces the low-energy spectra at filling fraction v = n/(2⁢pn + 1) that is identical, up to a topological (2⁢pn + 1)-fold multiplicity, to that of the integer quantum Hall spectra at v = n, for the incompressible state as well as all excitations. While the ansatz eigenfunctions in the disk geometry cannot be generalized to closed geometries such as torus or sphere, we show how to extend them to cylinder geometry. Meanwhile, we show eigenfunctions for charged excitations at filling fractions between 1/3 and 2/5 can be written on the torus and the spherical geometries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Thermal images collected during large-scale 3D printing with Ingersoll MasterPrint

This data set contains images produced to test the performance of anomaly and fault detection methods in the context of additive manufacturing. Two print jobs were executed using the Ingersoll MasterPrint with the Model 30 Strangpresse extruder. The material used was Techmer compounded polylactic acid (PLA) with wood flour as a filler (80/20 PLA/WF by weight). The first print job consists of the 3D printing of a hexagonal cylinder with a two-bead wall. This print was sliced at a gantry velocity of 3000 millimeter per minute, and an extruder screw speed of 68.14 rotations per minute. This are considered the normal operating conditions. A second hexagonal cylinder was printed using a reduced extruder screw speed, 15% lower than under normal operating conditions. The images were collected with a Teledyne FLIR Lepton 3.5 infra-red camera, a small form factor radiometric long-wave infrared camera with a spectral range of 8 µm to 14 µm. Sensor resolution was 160x120 pixels, with a pixel size of 12 µm, a temperature range of -10 - 450°C, and an accuracy of +/- 10°C in its low gain configuration. Images in this data set were collected with cameras oriented at the printer nozzle. The nozzle camera setup consisted of two cameras located 12.5cm from the nozzle center. These were mounted directly to the print head, so that the camera positions relative to the print direction would remain constant as it rotated around its C-axis to follow the print path. One camera was placed ahead of the nozzle to capture the previous layer immediately before being covered by the new layer of material, while the second camera was placed behind the nozzle and captured the freshly extruded bead. Images are collecting during each phase of the print: (a) idle (i.e., no material deposited), (b) extrusion (i.e., to prime the extruder), and (c) printing (deposition of material to manufacture the hexagonal cylinder).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electromagnetic radiation at extreme angular velocity

Abstract We consider a system rotating at extremely high angular velocity, so that its matter is found mostly at the light-cylinder. We posit that it can be described by quantum fields confined to the two-dimensional cylindrical surface rotating about its symmetry axis. We apply this model to study the electromagnetic radiation. In particular, we compute the photon spectrum emitted by the quark-gluon plasma.

Physics↗
DOE OSTI2024

Ducted Fuel Injection And Cooled Spray Technologies For Particulate Control In Heavy-duty Diesel Engines (Final Report)

Cooled Spray (CS) and Ducted Fuel Injection (DFI) are in-cylinder technologies for diesel engines that can reduce particulate matter and soot emissions and data has been published showing that these technologies can reduce soot emissions by 75-100% for some engines at some operating conditions. However, little is known about scaling the devices for engine size. Additionally, the performance of either technology over the engine duty cycle has not been explored. This project addresses both of these points through single-cylinder engine investigations. The objectives of this project are to provide details about dimensional scaling of these devices and to demonstrate 75% PM reduction over a range of operating conditions on a single-cylinder engine. Two engines were used for this project: a 125mm bore optically accessible engine at Sandia National Laboratories and a 168mm bore metal engine at Southwest Research Institute. The optical engine was used to study the performance of DFI and CS inserts for a large injector orifice diameter injector that is characteristic of a locomotive engine and to perform scaling studies for DFI. The metal engine was used to perform scaling and alignment studies for CS and to evaluate the technology for both EGR and non-EGR engines over the engine operating map. Modifications were required for both engines to accept the prototype inserts being tested. The optical engine required a new fuel injector, cylinder head and piston so that tests could be run at the pressures and engine speeds required. Additionally, a novel rotating stage was designed for the optical engine to simplify alignment of the modules. The metal engine required a modified cylinder head to accept CS inserts and a modified piston to provide additional space around the fuel injector for the CS inserts. Tests on the optical engine showed that DFI reduces PM emissions for both small injector orifices (0.170mm diameter) and large injector orifices (0.290mm). For high load testing, the DFI modules were not as effective as at low load testing, but it was acknowledged that minimal geometric optimization was performed and more improvements may be possible. Comparing DFI to CS and conventional diesel combustion (CDC), DFI performed better than CS or CDC. The CS geometries used in these studies may not be ideal for that engine and additional modifications likely would improve performance. Tests on the metal engine showed PM reductions as high has 80% at some operating conditions with duty-cycle PM reductions of ~50% for EGR and non-EGR configurations. The CS testing on the metal engine showed that chamfering of the fuel passage inlet either through hydro-erosion or mechanical grinding provided significant improvements in the PM reduction capabilities of the insert. Additionally, alignment sensitivities were explored and the data show that the tolerance to misalignment is approximately 0.05 to 0.1mm for the inserts that were studied here. Air-fuel ratio was shown to be important in the effectiveness of the CS inserts. In several tests, it was shown that the CS inserts are more effective at reducing the PM for high-AFR operating conditions compared to low AFR conditions. In summary, multiple designs were evaluated on both engines. It was found that for the conditions and configurations studied here, a fuel passage diameter of ~2.5mm performed best overall. Significant duty-cycle PM reductions are possible using these technologies and sensitivities to AFR, alignment fuel passage diameter and inlet fuel passage shaping were explored and are reported here. More PM reduction may be possible with improved geometric design and attention to alignment practices.

02 PETROLEUM↗
DOE OSTI2020

Variable stroke constant compression ratio engine

A continuously variable displacement engine has a plurality of pistons received in a cylinder block and connected to a nutator. A crankshaft with an axis of rotation is carried in a crankcase and incorporates an upper journal with a first angle relative to the axis and a lower journal with a second angle with respect to the axis. A first slider ball is engaged on the upper journal and a second slider ball engaged on the lower journal. A carrier assembly captures the first and second slider balls and incorporates an actuating cylinder. An actuation piston assembly is translatably carried in the actuating cylinder and connected to the crankshaft intermediate the upper journal and lower journal. The actuating piston is controllably translated between a first high eccentricity position and second low eccentricity position. An anti-rotational assembly connects the nutator to a piston case. A balance mechanism is adapted to change the amount of counterbalance for the nutator and the axial location of the counterbalance consistent with eccentricity of the nutator.

42 ENGINEERING↗
DOE OSTI2023

Nature of quantum spin liquids of the S = 1 2 Heisenberg antiferromagnet on the triangular lattice: A parallel DMRG study

Here we study the ground-state properties of the quantum spin liquid (QSL) phases of the spin-1/2 antiferromagnetic Heisenberg model on the triangular lattice with nearest- (J 1 ), next-nearest- (J 2 ), and third-neighbor (J 3 ) interactions by using density-matrix renormalization group (DMRG) method. By combining parallel DMRG with SU(2) spin rotational symmetry, we are able to obtain accurate results on large cylinders with length up to L x =48 and circumference L y =6–12. Our results suggest that the QSL phase of the J 1 -J 2 Heisenberg model is gapped which is characterized by the absence of gapless mode, short-range spin-spin and dimer-dimer correlations. In the presence of J 3 interaction, we find that a new critical QSL with a single gapless mode emerges. While both spin-spin and scalar chiral-chiral correlations are short-ranged, dimer-dimer correlations are quasi-long-ranged which decays as a power-law at long distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Error analysis of a hybrid control drum worth model

This paper presents a perturbation-based model for control drum worth prediction which employs both physics-based and statistics-based components. Control drums, or control shims, are cylindrical in shape and span the axial length of the core. A portion of the cylinder is coated in neutron absorbing material and the drum can rotate to introduce the absorbing material to the body of the core to reduce reactivity. The model can be expensive to create due to the requirement for full-core Monte Carlo eigenvalue calculations. Therefore, it is important to analyze how the errors in Monte Carlo calculated k{sub eff} used for model training affect model performance. It was found that the error in predicted criticalities could average to 70 pcm in the most complex form of the model and 215 pcm in the simplest form of the model. Furthermore, it was found that the Monte Carlo uncertainty in quantities calculated with Serpent used to train the models had minimal impact on the error observed from the model. Lastly, one of the forms of the hybrid model could be trained in considerably less computational time if the Monte Carlo calculations were run to higher uncertainty in k{sub eff} with a small penalty to model performance.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Causal fermion states in magnetic field in a relativistic rotating frame and electromagnetic radiation by a rapidly rotating charge

We consider the Dirac field uniformly rotating with angular velocity Ω and also subject to the constant magnetic field B directed along the rotation axis. The causal states are constrained to the interior of the light cylinder of radius c / Ω . When this radius is smaller than the system size, as in the quark-gluon plasma, the effect of the boundary on the fermion spectrum is critical. We derive the fermion spectrum and study its properties. We compute the intensity of the electromagnetic radiation emitted due to transitions between the fermion states. We study its dependence on energy and angular momentum for different values of the angular velocity and the magnetic field. Rotation has enormous impact on the electromagnetic radiation by the quark-gluon plasma with or without the magnetic field. Published by the American Physical Society 2024

Buzzegoli, Matteo (ORCID:0000000221145431)↗
DOE OSTI2020

VALVE TIMING AND AREA PROFILE SELECTION FOR HYDRAULIC PUMPS AND MOTORS

A significant amount of research has been conducted to select valve timing and area profiles that create efficient and quiet hydraulic pumps and motors. Numerous active valve architectures have been modeled and optimized, but the rationale for the final solution is often unclear. The solution is usually highly dependent on the modeled valve geometry constraints and the duty cycle of the pump or motor for which the valve was optimized. This paper first presents an ideal valve area profile and what compromises are made to design for a working pressure and speed range. The ideal valve area profile is resolved using a piston-cylinder model with a pressure dependent bulk modulus and variable valve openings. The piston-cylinder is first modeled as a pump with passive (check) valves and a specified pressure drop across the valves to determine the ideal area profile. A generalization of the ideal timing is demonstrated for positive pressure differential and positive rotation direction, also known as the first quadrant. The effects on valve timing when varying pressure are shown for the first quadrant, but the trends can be extrapolated for all quadrants of operation. The ideal valve profile is implemented as fixed valve timing, meaning the valve area is only a function of the timing angle, in a pump-motor. The pump-motor is simulated in one rotation direction through a pressure range. Performance is high in pumping operation, but when the pressure differential is reversed, cylinder pressure spikes ensue. Two strategies to modify an ideal valve area profile are presented: timing grooves and a pressure shifted valve timing. Timing grooves reduce pressure spikes and cavitation in the cylinder but generally increase throttling losses. A pressure shifted valve timing has lower throttling energy losses, making it the favored solution.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Anisotropic quantum Hall states in the presence of interactions with fourfold rotational symmetry

We study the effects of anisotropic interactions in the quantum Hall effect in the presence of a fourfold discrete rotational (C 4 ) symmetry. Employing the density matrix renormalization group technique on an infinite cylinder geometry (iDMRG), we calculate the anisotropy response of the Laughlin state at ν = 1/3 and the composite-Fermi liquid (CFL) state at ν = 1/2. We find that the anisotropy transferred from the interaction potential to the ν = 1/3 state is stronger when compared with the complementary case of an anisotropic band. Further, the strength of anisotropy reduces as the interaction is made shorter ranged. Quite surprisingly, at ν = 1/2, the deformation in the CF Fermi surface changes sign as the interaction range is reduced. Our results imply that the short-distance and long-distance parts of the interaction potential have opposite effects on the CFL state in the presence of C 4 -symmetric anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The Tianlai Cylinder Pathfinder Array: System Functions and Basic Performance Analysis

The Tianlai Cylinder Pathfinder is a radio interferometer array designed to test techniques for 21 cm intensity mapping in the post-reionization Universe, with the ultimate aim of mapping the large scale structure of the Universe and measuring cosmological parameters such as the dark energy equation of state. Each of its three parallel cylinder reflectors are oriented in the north-south direction, and the array has a large field of view. As the Earth rotates, the northern sky is observed by drift scanning. The array is located in Hongliuxia, a radio quiet site in Xinjiang, and saw its first light in September 2016. In this first paper on the data analysis of the Tianlai cylinder array, we describe the system functions of the array, the commissioning observations during 2016- 2018, and present its basic performance characteristics. We show examples of the interferometric visibility data, then using the observational data, we derive the actual beam profile in the east-west direction, the bandpass response, and calibrate the complex gains for the array elements either with a strong astronomical point source, or with an artificial calibrator source. Based on the preliminary analysis of the data, we derive the system temperature and sensitivity of the array.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Simulating Wind Around Isolated Buildings with the System for Atmospheric Modeling

A method to represent the flow around obstacles such as buildings is implemented in the System for Atmospheric Modeling (SAM). The method, which we call a Quasi-Solid Box Method (QSBM), introduces a simple modification to the anelastic equations that forces the flow to stagnate within the obstacle's boundaries. The performance of the modified SAM is evaluated using CEDVAL (Compilation of Experimental Data for Validation of Microscale Dispersion Models) wind tunnel measurements of the wind and tracer dispersion around a single rectangular building. All major observed features of the flow are quite well reproduced. The dispersion of the tracer released at the building base is also simulated. The results of simulation of a flow around a cubic building rotated by 45 degrees relative to the flow, and around a building in the form of a cylinder of aspect ratio of one, are also presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Numerical simulation of vortex-induced vibration response of a single IEA 10-MW wind turbine blade

Three-dimensional simulation of vortex-induced vibration (VIV) of a single International Energy Agency (IEA) 10-MW reference wind turbine blade with a length of 97.325 m is performed using the ExaWind stack, an open-source suite of codes. This study aims to illustrate the spanwise VIV response characteristics and cross-validate the results with an existing commercial framework. Five near-body meshes and three time steps are selected for the convergence study. To improve computational efficiency, several VIV triggering methods are also compared to shorten the VIV development period. The ExaWind-based VIV simulation strategy for a single IEA 10-MW blade is determined. First, the modal shape is validated against published results. Then, spanwise VIV responses of four blade configurations under a fixed and varied incoming flow velocity are analyzed. Results show that the VIV response is dominated by the first edgewise (second overall) mode. Little first-mode contributions appear near the second-mode node, producing a pi phase jump, and a higher harmonics response occurs near the blade root. Rotational degrees of freedom are minor compared with translational motion. The response versus reduced velocity is analyzed, showing a two-branch behavior similar to that of VIV for a bluff cylinder. Across all tested cases, the dominant frequency remains locked to the natural frequency of the second mode with no observed desynchronization. A mild deviation is observed for the case of 90-degree pitch and 310-degree azimuth rotation near a reduced velocity of 6, which will be examined with additional cases in future work. These findings indicate that severe VIV responses can arise under specific configurations and flow conditions, thereby increasing the potential for VIV fatigue damage and requiring greater attention during operation.

17 WIND ENERGY↗
DOE OSTI2020

Parameter space mapping of the Princeton magnetorotational instability experiment

Extensive simulations of the Princeton Magnetorotational Instability (MRI) Experiment with the Spectral/Finite Element code for Maxwell and Navier-Stokes Equations (SFEMaNS) have been performed to map the MRI-unstable region as a function of inner cylinder angular velocity and applied vertical magnetic field. The angular velocities of the outer cylinder and the end-cap rings follow the inner cylinder in fixed ratios optimized for MRI. Here, we first confirm the exponential growth of the MRI linear phase using idealized conducting vertical boundaries (end caps) rotating differentially with a Taylor-Couette profile. Subsequently, we run a multitude of simulations to scan the experimental parameter space and find that the normalized volume-averaged mean-square radial magnetic field, our main instability indicator, rises significantly where MRI is expected. At various locations, the local radial components of fluid velocity and generated magnetic field are well correlated with the volume-averaged indicator. Based on this correlation, a diagnostic system that will measure the radial magnetic field at several locations on the inner cylinder is proposed as the main comparison between simulation and experiment. A detailed analysis of poloidal mode structures in the SFEMaNS code indicates that MRI, rather than Ekman circulation or Rayleigh instability, dominates the fluid behavior in the region where MRI is expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Manufacturing of magnesium/aluminum bimetallic ring components by friction stir assisted simultaneous forging and solid-state joining

Here, a bimetallic ring component is forged by a friction stir assisted forging (FS-forging). A cylindrical bimetallic blank, magnesium AZ31 cylinder (Mg core) tightly fitted inside an aluminum 6061-T6 tube (Al skin), is used. In the FS-forging, the frictional heat and stirring of rotating tool forge the blank into a desired shape, while simultaneously generate a solid-state joint between the Mg core and the Al skin, without additional external heating, as confirmed by the microstructural analysis and mechanical tests. The microstructural analysis also shows that the characteristics of the solid-state joint can be different depending on the process parameters.

42 ENGINEERING↗
DOE OSTI2021

Chiral propulsion: The method of effective boundary conditions

We propose to apply an “effective boundary condition” method to the problem of chiral propulsion. For the case of a rotating helix moving through a fluid at a low Reynolds number, the method amounts to replacing the original helix (in the limit of small pitch) by a cylinder, but with a special kind of partial slip boundary conditions replacing the non-slip boundary conditions on the original helix. These boundary conditions are constructed to reproduce far-field velocities of the original problem and are defined by a few parameters (slipping lengths) that can be extracted from a problem in planar rather than cylindrical geometry. We derive the chiral propulsion coefficients for spirals, helicoids, helically modulated cylinders and some of their generalizations using the introduced method. In the case of spirals, we compare our results with the ones derived by Lighthill and find a very good agreement. Here, the proposed method is general and can be applied to any helical shape in the limit of a small pitch. Furthermore, we have established that for a broad class of helical surfaces the dependence of the chiral propulsion on the helical angle θ is universal, x ~ cos θ sin 2θ with the maximal propulsion achieved at the universal angle θ m = tan –1 (1/√2) ≈ 35.26°.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Methods for Mapping of Surface Charge Density on Arbitrary Dielectric Objects

A system to map surface charge densities on dielectric objects – e.g. PTFE, PMMA, and PA6 – is described to study maximum surface charge limits discharge and decay characteristics. Two electromechanical movements are used to achieve these goals: a three-axis robotic arm with an electrostatic probe and a three-axis auxiliary movement fitted with a current viewing resistor and laser displacement sensor. Dielectric objects no larger than a cylinder of eight-inch diameter and twelve inches in height are analyzed to create surface point clouds and generate a set of scan points. The arbitrary object is positioned upon a rotational axis with a laser displacement sensor oriented radially towards the rotational axis of the platform to determine the object’s physical limits.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗