SEARCH · Search NASA

Results for “Reactive particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Nanoporous Fe 2 O 3 and Soluble Fe(II) Intermediates Accelerate the Electrodeposition of Fe in NaOH(aq)

Electrochemical conversion of iron oxide to iron metal can enable low-cost batteries for long duration energy storage and zero-emissions ironmaking for steel. Iron oxides, such as hematite, can be electrochemically reduced to metallic iron in concentrated alkaline electrolytes at modest temperatures, but the relative influences of solid-state and dissolved intermediates at practical reaction rates remains unclear. Here, in this study, we prepare a homologous set of well-defined hematite particles to measure how the nanoscale morphology of oxides controls both their reactivity and apparent reduction mechanism in concentrated hydroxide. Correlated electron microscopy and rotating-ring-disk-electrode measurements revealed that nanoporous hematite and solid intermediates formed iron via a dissolution-redeposition pathway. In contrast, dense hematite particles directly formed iron metal via reactive fracture. While previous studies on iron electrowinning have primarily emphasized the role of particle diameter at the micron scale, these results demonstrate the importance of the dissolution-redeposition pathway to support rapid reaction rates and suggest that nanoscale porosity controls iron oxide reactivity at temperatures <100 °C. Therefore, iron-oxide-to-metal electrolyzers and fast-charging iron-air batteries supported by curtailed electricity can increase the rate of metal formation by accelerating fracture and dissolution in reactant oxides.

TEM↗

DOE OSTI2024

Impact of Particle Size on the Vapor-Phase Oxidative Coupling of Methanol and Dimethylamine over Palladium–Gold Nanoparticles

Oxidative coupling of methanol and dimethylamine in the presence of O 2 in the vapor phase over dilute Pd in Au bimetallic catalysts occurs via the dissociation of O 2 on Pd and selective oxidation of methanol on Au. Here, we synthesize a series of silica-supported PdAu alloy nanoparticle catalysts of varied Pd:Au ratios with ~5 nm particle diameter and show that these catalysts have increased selectivity to dimethylformamide across all Pd:Au ratios (~95%), distinct from observations over larger PdAu nanoparticles (~15–25 nm diameter) of similar Pd:Au ratios. Small monometallic Pd particles are more selective than large monometallic Pd particles, and small Au nanoparticles are reactive and selective for oxidative coupling (while large Au nanoparticles are inactive). Rates per surface metal atom were similar over PdAu nanoparticles of all sizes and increased monotonically with increasing Pd content for the small nanoparticles. Further, apparent reaction kinetics demonstrate distinct apparent methanol reaction order and apparent activation energy relative to those reported over larger nanoparticles of similar Pd:Au ratios. Unlike larger PdAu nanoparticles, the rate of dimethylformamide formation is not promoted by cofed water over small PdAu nanoparticles. The results of the kinetic studies are used to propose a series of elementary steps, derive a plausible rate expression, and regress rate and equilibrium constants. These results suggest high coverages of surface methoxy species and low coverages of adsorbates derived from dimethylamine. Taken together, these results demonstrate the sensitivity of the rates, selectivities, and kinetics of oxidative coupling reactions to the size of bimetallic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Report Summarizing the Mechanical Properties of a Large ODS Ferritic Alloy Ingot by Forging at High Temperatures for Future Mother Tube Production

Oxide dispersion strengthened (ODS) ferritic alloys are considered the benchmark fuel cladding and core structural material in advanced nuclear energy reactors that require high-temperature strength and creep properties and resistance to radiation damage. The ODS ferritic alloys including 14YWT are produced by mechanical alloying (MA), which is time-consuming and is associated with high manufacturing costs that are not beneficial to being used in advanced nuclear energy reactors. This report summarizes the accomplishments in FY24 in the INM program for producing an ODS ferritic alloy by high-deformation, high-temperature processing of reactive and ferritic alloy powders for advanced reactor fuel cladding applications. Following four hot forging experiments, it was concluded that several significant challenges were encountered that were difficult to overcome. These challenges were related to using high annealing temperatures for pressure assisted sintering processes to produce dense microstructures, but the high annealing temperatures result in long range diffusion of Ti through the bcc Fe lattice and react with the YIG particles that are distributed on the prior surfaces of the ferritic alloy powders. In addition, it was determined that the high deformations induced by forging at high temperatures were not very effective for fracturing the reactive YIG particles into smaller particles and distributing them into the interior of the ferritic alloy powders. Spark plasma sintering was attempted for shortening the time at high temperatures, which led to full densification but the microstructure characterization results still showed that Ti atoms diffused over long distances in the bcc Fe lattice and reacted with the YIG particles. Finally, a short 30 minute high intensity ball milling experiment was conducted on blended 14WT and YIG powders for inducing severe deformations that caused the initially spherical powders of 14WT decorated with the YIG particles on the surfaces to transform to flakes and fracturing of YIG particles into smaller particles that were incorporated into the bcc Fe lattice. Two forgings were performed with the high intensity milled powders: first annealing for 20 minutes at 850ºC followed by forging and second annealing for 20 minutes at 1,100ºC followed by forging. At 850ºC, Ti atoms are effectively immobile, thus allowing for densification albeit incomplete. The deformation by forging after annealing for 20 minutes at 1,100ºC favored dynamic recrystallization processes that led to nano-size grains with very high stored energy due to high dislocation density. The corresponding VH data showed significant hardening that correlated with estimated strengthening of ~1650 MPa. This hybrid processing approach combining high intensity ball milling of powder with annealing and forging showed the most promise for producing an oxide dispersing strengthened ferritic alloy.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Applying Deep Learning for Wildfire Identification: Economical and Accessible Solutions Leveraging Small Datasets

Wildfires significantly impact human health, air quality, visibility, weather, and climate change and cause substantial economic losses. While state and county-operated air quality monitors provide critical insights during wildfires, they are not available in all regions. This highlights the need for affordable, accessible tools that allow the general public to assess air quality impacts. In this study, we apply machine learning with deep neural networks to diagnose air quality rapidly from sky images taken at the Pacific Northwest National Laboratory in Richland, WA, USA. Using a convolutional neural network (CNN) framework, we trained a deep learning model to classify air quality indices based on sky images. By leveraging transfer learning, our approach fine-tunes a pre-trained model on a small dataset of sky images, significantly reducing training time while maintaining high accuracy. Our results demonstrate the potential of deep learning to provide rapid air quality diagnostics during wildfire episodes, offering early warnings to the public and enabling timely mitigation strategies, particularly for vulnerable populations. Additionally, we show that lower respiratory infections pose the highest health risk during acute smoke exposures. Reactive oxygen species (ROS) from wildfire particles further exacerbate health risks by triggering inflammation and other adverse effects.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Deconstructing the High Voltage Degradation Mechanisms in Na 2/3 Ni 1/3 Mn 2/3 O 2 with Single Crystals and Advanced Electrolyte

Abstract Sodium layered oxide cathodes can uniquely benefit from the existing lithium‐ion battery industry as sodium‐ion batteries gain traction as a potential low‐cost, drop‐in replacement. However, achieving relevant energy density with a suitable cycle life remains a challenge for sodium layered oxides. At high operating potentials, several competing degradation mechanisms prevent P2‐type Na 2/3 Ni 1/3 Mn 2/3 O 2 (≈550 Wh kg −1 ) from achieving meaningful cycle life—with bulk structural instability and surface reactivity being the primary retractors. Herein, the issue of particle cracking is addressed through detailed synthesis methods of “single‐crystal” materials. By comparison to a polycrystalline baseline, the single‐crystal materials quantify the capacity loss due to isolation of active material caused by intergranular particle cracking. The single crystal materials are then employed in cells with an advanced, “localized saturated electrolyte” (LSE) to demonstrate the magnitude of capacity loss due to electrolyte decomposition at the cathode surface. Mitigation of the surface reactivity through the LSE electrolyte effectively demonstrates the elevated importance of surface reactivity at high voltages despite the onset of egregious particle cracking. This work aims to guide future research into understanding molten‐salt assisted syntheses and advance the debate on surface versus bulk degradation.

Darga, Joe↗

DOE OSTI2025

Stochastic 3D reconstruction of cracked polycrystalline NMC particles using 2D SEM data

Li-ion battery performance is strongly influenced by the 3D microstructure of its cathode particles. Cracks within these particles develop during calendaring and cycling, reducing connectivity but increasing reactive surface, making their impact on battery performance complex. Understanding these contradictory effects requires a quantitative link between particle morphology and battery performance. However, informative 3D imaging techniques are time-consuming, costly and rarely available, such that analyses often have to rely on 2D image data. This paper presents a novel stereological approach for generating virtual 3D cathode particles exhibiting crack networks that are statistically equivalent to those observed in 2D sections of experimentally measured particles. Consequently, 2D image data suffices for deriving a full 3D characterization of cracked cathodes particles. Such virtually generated 3D particles could serve as geometry input for spatially resolved electro-chemo-mechanical simulations to enhance our understanding of structure-property relationships of cathodes in Li-ion batteries.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Microreactor Core Transportation Cask Model Description for Criticality Safety Validation Basis Assessment (Rev. 2)

Criticality safety analyses are completed on transportation casks used for microreactor whole core shipment to provide examples of models and analyses to industry, regulators, and nuclear community at large to be used in verification and validation analyses of similar applications. The microreactors considered are based on a Gas-Cooled Microreactor (GCMR) and a Heat-Pipe Microreactor (HPMR), both utilize HALEU fuel in the form of TRISO particles and various other design options considered in industry microreactor designs. Variant design options of GCMR and HPMR were also investigated to provide a wider application range for each technology. Criticality safety analyses for the GCMR and HPMR packages were performed using the CSAS6 sequence of SCALE 6.3.2 with the ENDF/B-VII.1-based continuous energy neutron libraries. Different scenarios were investigated, including normal operation and water flooded conditions to represent nominal and hypothetical accident scenarios. Sensitivity and similarity analyses are also performed using the TSUNAMI sequence of SCALE 6.3.2, and the similarity analysis uses all the experiments from the ICSBEP Handbook with High Enriched Uranium (HEU), Intermediate and mixed Enriched Uranium (IEU) and Low Enriched Uranium (LEU) systems. Many ICSBEP experiments were found marginally similar, with similarity index (ck) values greater than 0.8, to the GCMR and HPMR cask models, especially in flooded conditions that may be more constraining due to reduced reactivity margins. Some experiments using TRISO fuel particles and graphite moderator, including the recent THETA and Deimos experiments from LANL, together with some IRPhEP experiments, were also used for the similarity analyses. These TRISO-fueled and graphite moderated experiments behaved similarly to the GCMR models, with maximum ck value greater than 0.9, but they are less similar to the HPMR models. This observation indicates that additional critical experiments might be needed to further validate the criticality safety models, especially for heat-pipe based microreactor transport packages and for non-flooded transportation configurations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Oxidation and recharge of reactive structural Fe( II ) in titanomagnetite (Fe 3− x Ti x O 4 ) nanoparticles

Mixed-valent iron oxide minerals, such as magnetite (Fe(II)(Fe(III)) 2 O 4 ), are an important source of solid-state ferrous iron (Fe(II)) that can impact the speciation and transport of electron accepting contaminants in the Earth’s subsurface, such as radioactive pertechnetate ( 99 Tc(VII)O 4 − ). However, when oxidizing conditions are encountered, structural Fe(II) at the mineral surface is consumed yielding a maghemite (γ-Fe(III) 2 O 3 )-like layer that limits further electron transfer. This oxidized surface layer can be recharged back to the original Fe(II)/(III) ratio by re-exposure to reducing conditions, i.e., aqueous solutions containing Fe 2+ . However, for substituted magnetite (Fe 3−x M x O 4 , M = transition metal cation), the extent of this redox recyclability is unclear. Here, we examine oxidation and recharge for titanomagnetite (Fe 3−x Ti x O 4 ) nanoparticles, where the Fe(II)/Fe(III) ratio varies by the amount of Fe(II) required to charge balance the titanium (Ti(IV)) substituted into the structure. The nanoparticles were synthesized by aqueous precipitation from a solution containing ferrous, ferric and titanium chloride at room temperature. Transmission electron microscopy combined with electron energy loss spectroscopy revealed that rapid precipitation formed core–shell-like nanoparticles consisting of a hyperstoichiometric magnetite core, with Ti(IV) and charge balancing Fe(II) enriched at the surface. This surface enrichment made Fe(II) more available for electron transfer reactions with redox active solution species. Examination of oxidation by H 2 O 2 followed by recharge with aqueous Fe 2+ indicates recyclability of reducing equivalents in the nanoparticles, yielding a core recrystallized to stoichiometric magnetite and a shell bearing excess Fe(II) to charge balance the substituted Ti(IV). The recharged particles are shown to have restored redox reactivity with 99 Tc(VII)O 4 − resulting in reduction to 99 Tc(IV)O 2 and oxidation of the structural Fe(II) to Fe(III).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Prototype Development, Testing, and Modeling for a Solar Light-Trapping Planar-Cavity Particle Receiver (LTPCR)

Many applications for concentrating solar thermal power (CSP) technologies of high efficiency power cycles or thermochemical processes require higher operating temperatures and alternative heat transfer media. Inert solid particles for next-generation CSP and reactive gas and/or solid media for solar thermochemical processes are common options; however, these have significantly lower heat transfer capabilities than thermal oil, molten salt, or molten metal media. Conventional solar receivers operating temperatures >700 degrees Celsius face challenges including thermal performance and thermal-mechanical issues. To overcome these limitations, we have developed a novel light-trapping, planar-cavity receiver (LTPCR) that can heat solid-phase media within an enclosed receiver while maintaining a high aperture solar flux concentration for high efficiency. This paper presents progress on design, fabrication, and testing of a 100 kWt prototype receiver to demonstrate the LTPCR operability and its commercial feasibility.

14 SOLAR ENERGY↗

DOE OSTI2026

Prototype Development, Testing, and Modeling for a Solar Light-Trapping Planar-Cavity Particle Receiver

14 SOLAR ENERGY↗

DOE OSTI2025

Hydrogen Adsorption, Reactivity, and Catalysis on Colloidal Iron Carbide Nanoparticles

Supported iron carbide particles have long served as catalysts for CO hydrogenation (the Fischer Tropsch synthesis, FTS) and continue to be attractive. Despite this, little is known about their chemistry. Reported here is a colloidal Fe x C nanoparticle (NP) model system that allows direct observation of surface hydrogen and CO, as well as quantification of the surface H. Dodecylamine-capped Fe x C NPs (DDA-Fe x C NPs) were synthesized through solution-phase carburization of Fe NPs and form stable colloids in low-polarity organic solvents. Treatment of these colloids with H 2 or D 2 produced highly hydrogenated materials, and FTIR spectra of DDA-Fe x C-D n showed that most of the D binds to carbides, with at least four distinct v(C-D) modes. The surface C-H(D) bonds were all reactive, transferring hydrogen to alkenes and other reagents in solution. Titration and ICP measurements showed a 0.17:1 ratio of added H:total Fe, or roughly. 40 H per 1.8 nm DDA-Fe x C NP. Conversely, CO was preferentially bound to surface Fe sites, with FTIR spectra showing a single broad v(CO) that shifted with CO coverage or co-adsorption of H 2 . The DDA-Fe x C NPs were active catalysts for both olefin hydrogenation and the FTS, under mild conditions and without catalyst pre-treatment. The CO hydrogenation reactions yielded a broad distribution of long-chain linear paraffins and olefins. Though quantitative comparisons with typical FTS results are not possible because of our use of sealed batch reactors and other factors, the observations of high catalytic reactivity demonstrate the relevance of this model system to iron-carbide catalysis. DFT calculations on model slab surfaces with varying iron carbide stoichiometries revealed that the thermodynamically preferred surface adsorption sites are C for H ads and Fe for CO ads . A variety of binding sites and binding energies were found for each adsorbate. We are unaware of previous studies indicating that a diverse array of C-H bonds is the primary source of reactive H on iron carbides. Experimentally, the diversity of *C-H sites was evident in reactions with H-atom donors and abstractors of different strengths, from both the reaction stoichiometries and IR spectra. The different surface–H binding energies correlate with the v(C-D) stretching frequencies. Furthermore, these insights into complex iron carbide surfaces and catalysis could assist catalyst design, and they showcase the importance of stoichiometric studies of reaction intermediates.

08 HYDROGEN↗

DOE OSTI2025

The sources and diurnal variations of submicron aerosols in a coastal–rural environment near Houston, US

Aerosol properties were characterized at a rural site southwest of Houston from May to September 2022 during the intensive operation periods (IOPs) of the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). Backward trajectory analysis reveals three major air mass types: marine air mass from the Gulf, urban air mass influenced by urban emissions, and regional air mass. Marine aerosols typically show a bimodal size distribution and have the lowest particle number and mass concentrations of PM 1 (particulate matter with an aerodynamic diameter of less than 1 µm), while aerosols from air masses strongly influenced by urban emissions exhibit the highest concentrations. Organic aerosol (OA) accounts for more than 50 % of PM 1 for urban and regional air masses, whereas sulfate is comparable to OA in marine air masses. Positive matrix factorization (PMF) analysis of aerosol mass spectra identifies 6 OA factors: hydrocarbon-like OA (HOA), OA from the oxidation of monoterpenes (MT-SOA), OA from the reactive uptake of isoprene epoxydiols by acidic sulfate particles (isoprene-SOA), oxygenated OA arising from shipping emissions (shipping-OOA), and two oxygenated OA factors with high O : C ratios (OOA1 and OOA2). OOA2 has the highest O : C ratio and exhibits elevated mass concentration in the afternoon. Similar diurnal variation of highly oxidized OA factors was commonly observed in the Houston area during previous studies and attributed to the SOA formation by photochemistry and mixing from aloft. Here, using air mass backward trajectories and a 1-D box model, we show the diurnal trend of OOA2 mass concentration is instead driven by changes in air mass arriving at the rural site. The air mass changes are likely caused by the shift between land breezes and sea/bay breezes. Within the same air mass type (e.g., either urban or marine air mass), OOA2 mass concentration is largely independent of wind direction and shows essentially no diurnal variation, suggesting OOA2 is related to aged OA with minimal influence by local emissions. This study helps identify the major sources of OA in the Houston region and highlights the impacts of both atmospheric chemistry and meteorology on aerosol properties in the coastal–rural environment.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Screen-Printed Complex Ag Inks for Si HJT Metallization

Metallization using reactive metal inks has recently attracted significant research interest due to its advantages in cost of materials and manufacturing, while still achieving performance comparable to traditional fire-through particle pastes. Here, we present for the first time the use of reactive silver (Ag) inks via industrial screen-printing and inkjet printing methods for the metallization of different Si surfaces used in tunneling oxide passivating contacts (TOPCon) and Silicon heterojunction (SHJ) solar cells. Printed Ag lines exhibit a conductivity of ~5 Mu O·cm, which is approximately 3 times that of bulk Ag (1.59 µO·cm). The printed metal has a thickness of ~0.5-1.5 Mu m, an order of magnitude smaller than the current fire-through metal finger thickness (~15 Mu m). Contact resistivity measurements of the screen-printed and inkjet-printed samples on a transparent conducting oxide (TCO) surface show a very low value of ~0.2-12 mO·cm 2. Photoluminescence images of the metallized samples demonstrate minimal surface passivation degradation compared to the non-metallized areas (?iVoc <3.5 mV). Scanning electron microscopy images (SEM) reveal the structure of the printed metals on the Si surfaces as porous but much denser than fire-through Ag by nanoparticle paste. In the final presentation, we will showcase our results of printing these reactive Ag inks on high-efficiency heterojunction and TOPCon solar cells with full-area M6 wafers. Additionally, the adhesion of these reactive Ag inks on different Si surfaces according to ASTM D3359-17, as well as the performance of solar cells after standard IEC 61215 freeze/thaw and damp heat tests, will be presented. These new metal inks show promising potential as an alternative to the currently dominant particle-based pastes, offering lower Ag consumption and lower processing temperatures without compromising performance.

heterojunction solar cells↗

DOE OSTI2025

Single-molecule reaction mapping uncovers diverse behaviours of electrocatalytic surface Pd–H intermediates

Many vital electrocatalytic transformations hinge on reactive surface metal–hydrogen intermediates (M–H*), yet the low concentration and transient nature of such intermediates present formidable challenges to in-depth investigation. Here we use single-molecule super-resolution reaction imaging to directly probe surface palladium–hydrogen (Pd–H*) intermediates on individual palladium nanocubes during electrocatalytic hydrogen evolution. Our approach visualizes hydrogen spillover from palladium to the surrounding substrate surface over hundreds of nanometres away and dissects substantial inter- and intraparticle heterogeneity. Through Gaussian-broadening kinetic analysis, we reveal that ensemble-averaged measurements systematically overestimate the stability of Pd–H*. Moreover, we resolve three subpopulations of palladium nanocubes with distinct reactivity features, uncovering critical correlations between intermediate stability, hydrogenation reactivity and transition-state properties. Finally, our findings highlight the necessity of single-particle resolution for capturing the intrinsic complexity of electrocatalysts; our approach is also broadly applicable to interrogate surface-reactive intermediates across a wide array of electrocatalytic pathways.

electrocatalysis↗

DOE OSTI2024

Capacity Fade of Graphite/NMC811: Influence of Particle Morphology, Electrolyte, and Charge Voltage

LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is an important Li-ion battery cathode material; however, there is a tradeoff between delivered capacity and capacity retention. As the charge potential increases the capacity rises but at the expense of capacity retention. The decrease in capacity retention has been ascribed to several factors including particle cracking, surface reconstruction, transition metal dissolution, and electrolyte reactivity. The present study compares 4.1 and 4.3 V charging limits in commercially relevant graphite/NMC811 pouch cells for single crystal (SC) and polycrystalline (PC) NMC811 with ethylene carbonate (EC)-containing or EC-free electrolytes. The electrochemistry is rationalized through analysis of electrochemical impedance spectroscopy, positive electrode X-ray photoelectron spectroscopy, soft X-ray absorption spectroscopy, X-ray diffraction, and negative electrode mapping by X-ray fluorescence. Graphite/SC-NMC811 cells show high-capacity retention at 4.1 V but exhibit degradation at 4.3 V charging potentials. The EC-free electrolyte cells led to higher capacity fade, especially when charged to 4.3 V. Cathode dissolution and deposition on the negative electrode from PC-NMC811 cells was higher than for samples from SC-NMC811 cells. This study reveals the impact of material type, charge voltage, and electrolyte composition on the reactions at the positive electrode, their influence on the negative electrode, and evolution with cycle number.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Membrane Degradation in PEM Fuel Cells: Part I. Modeling Gas Crossover and the Pt Band

Understanding chemical degradation of the proton-exchange membrane in fuel cells is crucial for extending their lifetimes. Herein, various degradation reactions reported in literature are organized and analyzed, including direct radical generation and an indirect (Fenton) pathway. To understand the transport of dissolved H 2 and O 2 crossover gases as they relate to membrane degradation, an agglomerate-scale model is introduced, treating gas, ionomer, and catalyst as discrete phases. The model reveals a key phenomenon: at working potentials, dissolved gases are mostly consumed at the interface between the catalyst layer and the membrane, leaving little gas to cross the membrane. Under open-circuit conditions, dissolved gases are not consumed and can then cross the membrane. This explains high H 2 O 2 concentrations and degradation rates seen in experiments but not captured in previous models. Following mixed-potential theory, crossover gases supply the hydrogen-oxidation and oxygen-reduction reactions, which occur simultaneously on individual Pt particles comprising the Pt band in the membrane, forming reactive species (H 2 O 2 , OH·). Results show crossover gas almost entirely reacts on the Pt band, allowing little to reach the opposite electrode. Furthermore, the micro-scale geometry of the catalyst-layer/membrane interface impacts the gas crossover at working potentials, indicating that cell construction affects membrane durability.

Johnson, Evan F. [Lawrence Berkeley National Labor↗

DOE OSTI2024

Beam Design for Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisio nal ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Engineering design of a kW-scale continuous reactor-heat exchanger for high temperature discharge of particle-based thermochemical energy storage

This study investigates the theoretical design parameters and thermal performance of a kW-scale continuous oxidation reactor for high temperature (~1000 °C) thermochemical energy storage (TCES) applications. The concept comprises a counter-current particle-based system that includes a reaction zone with a heat exchanger to extract the heat produced from the oxidation reaction. Both above and below the hot reactive volume are sensible heat recuperation zones to enable the feed and removal of particles and oxidizing gas near ambient temperature during steady state operation. Two operation types for the reaction zone are studied, a fluidized bed reactor (FBR) and a moving bed reactor (MBR). The results of the parametric analysis suggest that the MBR requires a smaller volume per kW of heat produced, achieving power densities in excess of 2500 kW/m3 compared to ~ 900 kW/m 3 in the FBR. Additionally, the MBR achieves between 0.71 and 0.99 oxidation conversions compared to between 0.23 and 0.38 conversions in the FBR with the same volumes and flowrates. However, the FBR has the potential to maintain a uniform reactor temperature which can produce heat transfer fluid (HTF) outlet temperatures as high as the reactor temperature, i.e., ~1000 °C, whereas the MBR produces variable reactor temperatures that can create overheating zones and low HTF outlet temperatures (< 800 °C) depending on the operating conditions selected. Future work should aim at understanding the coupled fluid dynamics, heat and mass transfer, and thermochemical reaction for any given combination of reactor volume and contacting patterns. Here, these studies should be complemented by experimental work on particle-gas TCES reactors.

25 ENERGY STORAGE↗