Search NASA⌕ Search

SEARCH · Search NASA

Results for “Realization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Optical communication with two-photon coherent states. III - Quantum measurements realizable with photoemissive detectors

Homodyne detection is shown to achieve the same signal-to-noise ratio as the quantum field quadrature measurement, thus providing a receiver which realizes linear modulation TCS performance gain. The full equivalence of homodyne detection and single-quadrature field measurement is established. A heterodyne configuration which uses a TCS image-band oscillator in addition to the usual coherent state local oscillator is studied. Results are obtained by means of a representation theorem which shows that photoemissive detection realizes the photon flux density measurement.

Yuen, H. P.↗
NASA NTRS1980

Realization theory and quadratic optimal controllers for systems defined over Banach and Frechet algebras

It is noted that recent work by Kamen (1979) on the stability of half-plane digital filters shows that the problem of the existence of a feedback law also arises for other Banach algebras in applications. This situation calls for a realization theory and stabilizability criteria for systems defined over Banach for Frechet algebra A. Such a theory is developed here, with special emphasis placed on the construction of finitely generated realizations, the existence of coprime factorizations for T(s) defined over A, and the solvability of the quadratic optimal control problem and the associated algebraic Riccati equation over A.

Byrnes, C. I.↗
NASA NTRS1985

An Eigensystem Realization Algorithm (ERA) for modal parameter identification and model reduction

A method, called the Eigensystem Realization Algorithm (ERA), is developed for modal parameter identification and model reduction of dynamic systems from test data. A new approach is introduced in conjunction with the singular value decomposition technique to derive the basic formulation of minimum order realization which is an extended version of the Ho-Kalman algorithm. The basic formulation is then transformed into modal space for modal parameter identification. Two accuracy indicators are developed to quantitatively identify the system modes and noise modes. For illustration of the algorithm, examples are shown using simulation data and experimental data for a rectangular grid structure.

Juang, J. N.↗
NASA NTRS1985

An eigensystem realization algorithm for modal parameter identification and model reduction

A method called the eigensystem realization algorithm is developed for modal parameter identification and model reduction of dynamic systems from test data. A new approach is introduced in conjunction with the singular-value decomposition technique to derive the basic formulation of minimum order realization which is an extended version of the Ho-Kalman algorithm. The basic formulation is then transformed into modal space for modal parameter identification. Two accuracy indicators are developed to quantitatively identify the system and noise modes. For illustration of the algorithm, an example is shown using experimental data from the Galileo spacecraft.

Juang, J.-N.↗
NASA NTRS1986

Effects of noise on modal parameters identified by the Eigensystem Realization Algorithm

The basic concept of the Eigensystem Realization Algorithm for modal parameter identification and model reduction is extended to minimize the distortion of the identified parameters caused by noise. The mathematical foundation for the properties of accuracy indicators, such as the singular values of the data matrix and modal amplitude coherence, is provided, based on knowledge of the noise characteristics. These indicators quantitatively discriminate noise from system information and are used to reduce the realized system model to a better approximation of the true model. Monte Carlo Simulations are included to support the analytical studies.

Juang, J.-N.↗
NASA NTRS1986

An Eigensystem Realization Algorithm in Frequency Domain for modal parameter identification

This paper demonstrates the close conceptual relationships between time domain and frequency domain approaches to identification of modal parameters for linear systems. A frequency domain eigensystem realization algorithm, via transfer functions, is developed using a known procedure formulated for a time domain eigensystem realization algorithm, via free decay measurement data. An important feature is the capability of windowing to concentrate analysis on the frequency range of interest. The procedure of overlap averaging is used to produce smoother spectra to reduce the effect of noise on identified modal parameters. Examples from simulation and experiments are given to illustrate the validity of formulations derived in the paper.

Juang, J.-N.↗
NASA NTRS1987

An eigensystem realization algorithm using data correlations (ERA/DC) for modal parameter identification

A modification to the Eigensystem Realization Algorithm (ERA) for modal parameter identification is presented in this paper. The ERA minimum order realization approach using singular value decomposition is combined with the philosophy of the Correlation Fit method in state space form such that response data correlations rather than actual response values are used for modal parameter identification. This new method, the ERA using data correlations (ERA/DC), reduces bias errors due to noise corruption significantly without the need for model overspecification. This method is tested using simulated five-degree-of-freedom system responses corrupted by measurement noise. It is found for this case that, when model overspecification is permitted and a minimum order solution obtained via singular value truncation, the results from the two methods are of similar quality.

Juang, Jer-Nan↗
NASA NTRS1988

Some experiences with the Eigensystem Realization Algorithm

The Eigensystem Realization Algorithm (ERA) is a multiinput/multioutput time-domain algorithm for minimum-order system realization and modal parameter identification. It has been used for structural dynamics data analysis at the Langley Research Center for several years. Some of the practical experiences encountered in these projects are discussed in this paper. Three examples are used: the Galileo spacecraft, the Solar Array Flight Experiment, and a laboratory space-truss model. Several techniques for assessing identification accuracy are illustrated.

Pappa, Richard S.↗
NASA NTRS1988

Confined turbulent fluid-particle flow modeling using multiple-realization particle trajectory schemes

A multiple-realization particle trajectory scheme has been developed and applied to the numerical prediction of confined turbulent fluid-particle flows. The example flows investigated include the vertical pipe upflow experimental data of Tsuji et al. and the experimental data of Leavitt for a coaxial jet flow, comprising a particle-laden central jet and a clean annular jet, into a large recirculation chamber. The results obtained from the numerical scheme agree well with the experimental data, lending confidence to the modeling approach. The multiple-realization particle trajectory turbulent flow modeling scheme is believed to be a more elegant and accurate approach to the extension of single-particle hydrodynamics to dilute multi-particle systems than the more commonly employed two-fluid modeling approach. It is also better able to incorporate additional force items such as lift, virtual mass and Bassett history terms directly into the particle equation of motion as appropriate. This makes it a suitable candidate for particle migration studies and an extension to situations involving liquid particulate phases with possible propulsion applications, such as in spray combustion, follows naturally.

Adeniji-Fashola, A. A.↗
NASA NTRS1988

Realizable feed-element patterns and optimum aperture efficiency in multibeam antenna systems

The results of an earlier paper by Rahmat-Samii et al. (1981), regarding realizable patterns from feed elements that are part of an array that feeds a reflector antenna, are extended. The earlier paper used a cos exp q theta model for the element radiation pattern, whereas here a parametric study is performed, using a model that assumes a central beam of cos exp q theta shape, with a constant sidelobe level outside the central beam. Realizable q-values are constrained by the maximum directivity based on feed element area. The optimum aperture efficiency (excluding array feed network losses) in an array-reflector system is evaluated as a function of element spacing using this model as well as the model of the earlier paper. Experimental data for tapered slot antenna (TSA) arrays are in agreement with the conclusions based on the model.

Yngvesson, K. S.↗
NASA NTRS1989

Recursive form of the eigensystem realization algorithm for system identification

An algorithm is developed for recursively calculating the minimum realization of a linear system from sampled impulse response data. The Gram-Schmidt orthonormalization technique is used to generate an orthonormal basis for factorization of the data matrix. The system matrix thus identified is in upper Hessenberg form, which has advantages for the identification of modal parameters including damping coefficients, frequencies, mode shapes, and modal participation factors. It also has the property that once an element of the system matrix is computed, it is never altered as the dimension of the model is increased in the recursive process. Numerical examples are presented for comparison of the recursive and nonrecursive forms of the eigensystem realization algorithm.

Longman, Richard W.↗
NASA NTRS1989

The realization of input-output maps using bialgebras

The theory of bialgebras is used to prove a state space realization theorem for input/output maps of dynamical systems. This approach allows for the consideration of the classical results of Fliess and more recent results on realizations involving families of trees. Two examples of applications of the theorum are given.

Grossman, Robert↗
NASA NTRS1991

QR Factorization In The Partial-Realization Problem

Report discusses use of QR factorization in solving partial-realization problem. Subject matter relevant to characterization of system, details of which hidden (a "blackbox"), on basis of relationship between its inputs and outputs. When realization process successful, system shown linear with known number of degrees of freedom and representable by mathematical model providing basis for prediction of outputs and design of controllers.

Verhaegen, M. H.↗
NASA NTRS1992

A consistent-mode indicator for the eigensystem realization algorithm

A new method is described for assessing the consistency of model parameters identified with the Eigensystem Realization Algorithm (ERA). Identification results show varying consistency in practice due to many sources, including high modal density, nonlinearity, and inadequate excitation. Consistency is considered to be a reliable indicator of accuracy. The new method is the culmination of many years of experience in developing a practical implementation of the Eigensystem Realization Algorithm. The effectiveness of the method is illustrated using data from NASA Langley's Controls-Structures-Interaction Evolutionary Model.

Pappa, Richard S.↗
NASA NTRS1992

A consistent-mode indicator for the eigensystem realization algorithm

A new method is described for assessing the consistency of structural modal parameters identified with the Eigensystem Realization Algorithm. Identification results show varying consistency in practice due to many sources including high modal density, nonlinearity, and inadequate excitation. Consistency is considered to be a reliable indicator of accuracy. The new method is the culmination of many years of experience in developing a practical implementation of the Eigensystem Realization Algorithm. The effectiveness of the method is illustrated using data from NASA Langley's Controls-Structures-Interaction Evolutionary Model.

Pappa, R. S.↗
NASA NTRS1993

A Realizable Reynolds Stress Algebraic Equation Model

The invariance theory in continuum mechanics is applied to analyze Reynolds stresses in high Reynolds number turbulent flows. The analysis leads to a turbulent constitutive relation that relates the Reynolds stresses to the mean velocity gradients in a more general form in which the classical isotropic eddy viscosity model is just the linear approximation of the general form. On the basis of realizability analysis, a set of model coefficients are obtained which are functions of the time scale ratios of the turbulence to the mean strain rate and the mean rotation rate. The coefficients will ensure the positivity of each component of the mean rotation rate. These coefficients will ensure the positivity of each component of the turbulent kinetic energy - realizability that most existing turbulence models fail to satisfy. Separated flows over backward-facing step configurations are taken as applications. The calculations are performed with a conservative finite-volume method. Grid-independent and numerical diffusion-free solutions are obtained by using differencing schemes of second-order accuracy on sufficiently fine grids. The calculated results are compared in detail with the experimental data for both mean and turbulent quantities. The comparison shows that the present proposal significantly improves the predictive capability of K-epsilon based two equation models. In addition, the proposed model is able to simulate rotational homogeneous shear flows with large rotation rates which all conventional eddy viscosity models fail to simulate.

Shih, Tsan-Hsing↗
NASA NTRS1993

Attitude control with realization of linear error dynamics

An attitude control law is derived to realize linear unforced error dynamics with the attitude error defined in terms of rotation group algebra (rather than vector algebra). Euler parameters are used in the rotational dynamics model because they are globally nonsingular, but only the minimal three Euler parameters are used in the error dynamics model because they have no nonlinear mathematical constraints to prevent the realization of linear error dynamics. The control law is singular only when the attitude error angle is exactly pi rad about any eigenaxis, and a simple intuitive modification at the singularity allows the control law to be used globally. The forced error dynamics are nonlinear but stable. Numerical simulation tests show that the control law performs robustly for both initial attitude acquisition and attitude control.

Paielli, Russell A.↗
NASA NTRS1993

Identification of a second-order mechanical system model from a state space realization

Many system identification algorithms produce models in modern state variable form. When a mechanical system is identified one knows that there must be a model in second order form. In structural dynamics one is interested in either a modal model of the system, or in a model including a mass matrix, stiffness matrix and a damping matrix. In this paper, algorithms are developed that convert a modern state space realization into the above two representations of interest in mechanical systems. The algorithm can be used with any identification methods that produce a modern state variable representation such as the Eigensystem Realization Algorithm (ERA), its modified version by data correlation (ERA/DC), and combinations of these with Observer/Kalman Filter Identification (OKID). An algorithm is developed that allows one to identify the damping matrix in a model representation, so that one determines how near to modal the damping is in the system, and can therefore understand the degree to which the modes are coupled by the damping in the system. A second algorithm produced the mass, damping, and stiffness matrices, given the input and output matrices. It is assumed that the number of sensors (or the number of actuators) is greater than or equal to the number of modes in the system, and it is proved that this is a necessary condition to be able to uniquely identify these matrices. Experience with examples suggests that a singular value truncation involved in these algorithms can help one determine the true system order. This truncation has the benefit of knowledge of the correct form for a mechanical system model, which is not present in the modern control identification algorithm.

Tseng, Dong-Huei↗