Search NASA⌕ Search

SEARCH · Search NASA

Results for “Recycled polymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Improving the Recyclability of Polymer Composites With Cellulose Nanofibrils

Cellulose nanofibers (CNFs) have been widely studied for their reinforcing potential in high-performance composites. While there are numerous publications on CNF-reinforced composites in a variety of polymer matrices, few have considered the recyclability of such thermoplastic composites and whether the incorporation of CNFs deteriorates or improves their performance upon reprocessing. In this study, two thermoplastic resins, poly(lactic acid) (PLA), and glycol-modified polyethylene terephthalate (PETg), were prepared with CNF reinforcement and thermomechanically recycled to investigate the effect of CNF inclusion on the composite properties after reprocessing as well as their effect on the composites’ number of useful life cycles. Additionally, changes in mechanical, thermal, rheological, molecular, and microstructural properties of the composites and/or base resins were monitored as a function of cycle numbers. As is typical, the polymers’ molecular weight and mechanical performance deteriorated with continued processing. However, the addition of spray dried CNF was found to better maintain the mechanical performance of both polymers throughout multiple recycling steps as compared to neat samples. For example, the tensile strength of PETg with 20 wt% CNF after 6 processing cycles was found to exceed that of virgin neat PETg, and higher loadings of CNF were found to preserve a higher yield strength during multiple rounds of reprocessing compared to PETg composites with lower CNF loadings. Ultimately this study indicates that the addition of CNF to some thermoplastic materials can increase both their sustainability by offsetting the use of high-embodied energy resins and their circularity by enabling performance retention over more use cycles.

42 ENGINEERING↗
DOE OSTI2024

Depolymerizable and recyclable luminescent polymers with high light-emitting efficiencies

Luminescent polymers are of great interest in a number of photonic technologies, including electroluminescence, bioimaging, medical diagnosis, bio-stimulation and security signage. Incorporating depolymerizability and recyclability into luminescent polymers is pivotal for promoting their sustainability and minimizing their environmental impacts at the end of the product lifecycle, but existing strategies often compromise the light-emitting efficiencies. Here, in this study, we develop a strategy that utilizes cleavable moiety to create depolymerizable and recyclable thermally activated delayed fluorescence (TADF) polymers without compromising their high light-emitting efficiencies. The electroluminescent devices based on the TADF polymers achieved a high external quantum efficiency of up to 15.1 %. The TADF polymers can be depolymerized under either mild acidic or heating conditions, with precise control of the kinetics, and the obtained pure monomers can potentially be isolated and repolymerized for subsequent life applications. This work promotes the end-of-life environmental friendliness and circularity of luminescent materials, paving the way to a sustainable photonic industry. Developing depolymerizable and recyclable polymers with high light-emitting efficiencies is of vital importance for sustainable photonic technologies, but remains challenging. Here the authors design a strategy to develop such polymers based on the use of controllable cleavable moiety.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recyclable Thermoset Polymers From Lignin Derived Phenols

Spero Renewables has successfully developed bio-based thermoset polymers that can be decomposed and recycled under mild conditions while maintaining physical properties comparable to traditional BPA-based thermosets. Key accomplishments include the optimization of thermoset synthesis with over 50% bio-based content, the establishment of recycling conditions for both thermosets and carbon fiber-reinforced composites, and the demonstration of CFRC recyclability. The project also included a techno-economic analysis (TEA), which revealed significant cost reductions through carbon fiber recycling, and a lifecycle analysis (LCA), which showed that Spero's bio-based CFRCs could reduce greenhouse gas emissions by up to 74% compared to conventional fossil-based CFRCs. This work positions Spero Renewables at the forefront of sustainable thermoset and composite material technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Infinitely Recyclable Network Polymers, Enabling Sustainable Manufacturing (CRADA Final Report)

This FLO Materials project was aimed at commercializing a new, infinitely recyclable material that can enable closed-loop lifecycles for hard-to-recycle plastics and plastic products. Four hundred million metric tons of virgin plastic is produced each year, yet less than 10% of this material is recycled. In the US alone, 2% of energy consumption is dedicated to the manufacture of virgin plastics, polymer resin, and synthetic rubbers. By keeping plastic materials in circulation longer, we can reduce waste, lower manufacturing costs, cut energy and oil consumption, and drastically reduce greenhouse gas (GHG) emissions. Specifically, FLO’s innovation overcomes the complications associated with salvaging difficult-to-recycle plastics (i.e., contaminated thermoplastic linear polymers, thermoset cross-linked network polymers), which represent at least 20% of total polymer global production, with a recycling rate of near 0%. Chemical recycling of these new polymers through depolymerization allows all additives to be easily removed at room temperature and the recovered monomers to be remanufactured into next generation materials with 100% recovery of mechanical performance and aesthetic quality.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Solubility-limited depolymerization kinetics in the glycolysis of carbonyl-containing polymers

Chemical recycling of condensation polymers is often rationalized on the basis of the intrinsic reactivity of ester and carbonate functional groups. However, under heterogeneous conditions relevant to plastic waste processing and environmental degradation, bulk depolymerization rates often diverge from trends predicted by homogeneous chemistry. Here, we investigate how polymer–solvent compatibility, catalyst strength, and phase behavior govern the heterogeneous glycolysis of carbonyl-containing polymers. Using poly(ethylene terephthalate) (PET), glycol-modified PET (PETG), and bisphenol-A polycarbonate (PC) as model systems, we examine depolymerization kinetics at 180 °C with ethylene glycol and bisphenol A as diols under both amphoteric organosalt (TBD : MSA) and strong base (TBD) catalysis. Despite substantial differences in crystallinity and glycol uptake, PET and PETG depolymerize at comparable rates under organosalt catalysis, while PC depolymerizes significantly more slowly under identical conditions. Time-resolved molecular weight analysis and thermal characterization demonstrate that these rate differences do not arise from crystallinity, swelling, or inherent carbonyl reactivity, but instead reflect solubility-limited kinetics that constrain the transition from heterogeneous to homogeneous reaction regimes. When polymer solubility is low, depolymerization remains heterogeneous and slow; when solubility is enhanced—either through increased polymer–diol compatibility or stronger base catalysis—rapid homogeneous depolymerization is observed, reversing apparent reactivity trends. These results establish solubility and phase behavior as primary determinants of depolymerization kinetics in heterogeneous polymer recycling systems. By demonstrating how catalyst selection and solvent compatibility can expose or overcome solubility limitations, this work provides mechanistic insight to design more energy-efficient and selective chemical recycling processes. More broadly, these findings suggest that polymers with limited solvent or water compatibility may resist chemical degradation in the environment, favoring fragmentation and persistence as micro- and nanoplastics. Understanding solubility-controlled depolymerization offers a pathway toward more sustainable polymer design and end-of-life chemical recovery.

Watson-Sanders, Shelby [Department of Chemistry, U↗
DOE OSTI2024

Polyhydroxyalkanoates in emerging recycling technologies for a circular materials economy

Circular polymer systems, specifically polyesters operating through chemical and biological technologies, are approaching a critical moment of industrial adoption and scale-up feasibility. At the same time, polyhydroxyalkanoate (PHA) production, scale-up, and resulting material development is converging toward commodity applications. The current PHA end-of-life philosophy, however, focalizes leveraging inherent biodegradability to circumvent plastic waste accumulation. If indeed a substantial replacement of incumbent single-use plastics with PHA alternatives is to be met in commercial manufacture, we emphasize the importance of linking PHA development with feasible polymer recycling technologies. In other words, a PHA materials economy is significantly more carbon- and cost-favorable when efficient mechanical (reprocessing), chemical (deconstruction, depolymerization), or biological (enzymatic) recycling is prioritized over biodegradation or composting. In this perspective, we discuss strategies for PHA recyclable-by-design principles, guidable by developing machine learning tools, as well as material compatibility with closed-loop recycling technologies. Additionally, we posit compelling life-cycle assessment incentives for adopting polymer reclamation over competing pathways. Ultimately, we hope this narrative further inspires the alignment between PHA design with growing calls for a circular material economy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Blending Polyurethane Thermosets Using Dynamic Urethane Exchange

Recycling crosslinked polyurethanes (PUs) is accomplished through mechanical or chemical processes that are energy-intensive or produce plastics of lesser value. Polymer recycling processes are notably intolerant of polymer mixtures, yet the ability to reprocess and compatibilize two or more crosslinked PUs together will make this process more amenable to mixed waste streams while offering an opportunity to tune the properties of the recycled polymer products. Here, we blend a rigid polyester PU and a soft polyether PU using twin-screw extrusion to yield materials with tunable mechanical properties based on the feed composition. Their material properties were compared to those of compression-molded reprocessed blends and blends where the monomers were mixed prior to synthesis. The extruded materials showed similar mechanical and thermal properties to newly prepared blends and had higher-value mechanical properties compared to the samples reprocessed via compression molding. The morphologies of the blends were observed using phase imaging via atomic force microscopy to show that there is less phase separation in the extruded materials compared to compression-molded blends. The mechanical properties of these materials were tunable from soft to elastomeric to rigid based on the feed composition, and this tunability was demonstrated through four consecutive reprocessing cycles, through which the mechanical properties were steadily varied from rigid to soft by incorporating increasing amounts of soft polyether PU material. Here, this blending method for reprocessing mixed waste compatibilizes different PUs and provides a means to tune the mechanical properties of a PU product, even if starting from waste streams of varying compositions. As such, this process represents an intriguing new approach for polymer reprocessing.

Extrusion↗
DOE OSTI2026

Recyclability of reversible polymer networks over a Dozen reprocessing cycles

Reversible polymer networks capable of reversible reactions along their backbone provide a promising strategy for addressing waste management challenges associated with conventional thermoset products. However, reversible polymer networks cannot be recycled infinitely. Unavoidable side reactions eventually cause significant degradation of mechanical properties or loss of recyclability. This study aims to answer a simple yet critical question on reversible polymer network systems: how many reprocessing cycles can be achieved before profound mechanical degradation or a loss of recyclability? The recyclability of Diels–Alder (DA) network samples was evaluated by repeating consistent reprocessing cycles until they were no longer reprocessable. To enhance their recyclability, the chemical structure of the maleimide precursor was tailored to mitigating side reactions by maleimide homopolymerization. Remarkably, by employing a maleimide precursor with alkyl substitutions on its phenyl group, the DA network system attained 12 reprocessing cycles using injection molding at 160 °C without significant degradation of mechanical properties. However, the 13th reprocessing cycle did not succeed. Rheological analysis revealed the accumulation of non-reversible bonds within the network structure during repeated reprocessing, despite fairly consistent mechanical properties under operating conditions. This study demonstrates that the rational design of the maleimide precursor is an effective means to enhance the reprocessability of DA networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Shear and extensional rheology of polyethylenes recycled using a solvent dissolution process

There is high market demand for increasing the viability of current plastic recycling processes. In this work rheology is used to evaluate the mechanical properties of a solvent dissolution recycled polymer compared to its virgin untreated precursor. Solvent dissolution and precipitation are used to target multi-layer, multi-component, industry films, which cannot be mechanically recycled. Polyethylene was chosen as the primary polymer of interest. Polymer thermal stability was monitored via time-resolved rheology; consecutive frequency sweeps over the course of an hour while under isothermal conditions. Additional rheological experiments were performed within the identified thermally stable conditions. Small-angle oscillatory shear was complemented with steady shear viscosity experiments over a wide range of shear rates. Extensional rheology was used to determine changes in molecular weight and cross link density. As a result, rheological characterization is supplemented with gas chromatography–mass spectrometry of the solvent wash to determine components stripped from the virgin polymers during solvent treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Alkylidene functionalization produces highly recyclable and scalable polyhydroxyalkanoates

Recyclable polymers that can be produced at scale and readily tuned within the same polymer framework for specific properties are important to achieving a circular materials economy. To this end, synthetic poly(3-hydroxyalkanoate)s (PHAs) have emerged as high-performance, chemically recyclable variants of biological PHAs, but their difficult monomer syntheses and suboptimal recycling efficiencies pose challenges for large-scale deployment. In this study, we investigated a β-isopropylidene PHA, i-PHA, for which the lactone monomer can be synthesized by existing industrial methods from biomass-derived isobutyric acid. The alkylidene substituent prevents decarboxylative degradation typically observed during PHA depolymerization, enabling near-quantitative chemical recycling to monomer. Controlled hydrogenation of the β-isopropylidene side group produces PHAs with diverse performance metrics that are competitive with a range of commodity polymers, spanning strong fibers to ductile thermoplastics to superglue epoxy resins.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scalable, biologically sourced depolymerizable polydienes with intrinsically weakened carbon–carbon bonds

Currently, there are few examples of circularly recyclable polymers with all-carbon backbones, probably owing to the challenge of using selective C–C bond cleavage to efficiently produce monomers in recycling processes. Furthermore, here we demonstrate a series of biologically sourced polymuconate polymers synthesized via simple free-radical polymerization that exhibit intrinsically weakened C–C bonds and controlled chemical recycling to monomers. Modifying the side chains and copolymerization ratios allows a wide range of mechanical property tuning, achieving performances comparable to those of commercial plastics such as polystyrene, polymethyl methacrylate and polybutadiene. Techno-economic analysis and life cycle assessment for production at a scale of 100 kilotons per year show that the materials are currently slightly more expensive and environmentally intensive compared with conventional rubbers. However, use of recycled materials via depolymerization can greatly decrease the cost and environmental impacts of polymuconate production (for example, down to US$1.59 per kilogram) to outperform its commercial counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Covalent adaptable polymer networks with CO 2 -facilitated recyclability

Cross-linked polymers with covalent adaptable networks (CANs) can be reprocessed under external stimuli owing to the exchangeability of dynamic covalent bonds. Optimization of reprocessing conditions is critical since increasing the reprocessing temperature costs more energy and even deteriorates the materials, while reducing the reprocessing temperature via molecular design usually narrows the service temperature range. Exploiting CO 2 gas as an external trigger for lowering the reprocessing barrier shows great promise in low sample contamination and environmental friendliness. Herein, we develop a type of CANs incorporated with ionic clusters that achieve CO 2 -facilitated recyclability without sacrificing performance. The presence of CO 2 can facilitate the rearrangement of ionic clusters, thus promoting the exchange of dynamic bonds. The effective stress relaxation and network rearrangement enable the system with rapid recycling under CO 2 while retaining excellent mechanical performance in working conditions. This work opens avenues to design recyclable polymer materials with tunable dynamics and responsive recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Catalytic Difunctionalization of Cyclic Dienes: Direct Entry to Novel ROMP Monomers

We developed a catalytic platform to convert simple hydrocarbon feedstocks into valuable, tunable materials by leveraging nickel-catalyzed difunctionalization of cyclic dienes to access a novel class of cyclic alkene monomers. These monomers undergo ring-opening metathesis polymerization (ROMP) to yield sequence-controlled polymers with defined stereochemistry. Through mechanistic studies and catalyst optimization, we established a scalable, gram-level synthesis for selective diarylation, and expanded the reaction scope to include arylalkylation through rationally tuning the organoboron coupling partner. The resulting polymers were systematically studied to understand how steric, electronic, and stereochemical features influence polymerization behavior and bulk material properties. Functionalized derivatives bearing sulfonated groups were explored as proton-exchange membranes, and chemical recycling pathways were developed to recover monomers from the final materials. This work bridges small-molecule catalysis and macromolecular design, enabling access to tunable, recyclable polymers from abundant hydrocarbon starting materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polyethylene Incorporating Diels–Alder Comonomers: A “Trojan Horse” Strategy for Chemically Recyclable Polyolefins

Abstract Polyolefins with periodic unsaturation in the backbone chain are sought after for synthesizing chemically recyclable polymers or telechelic polyolefin macromonomers. Here we introduce a bottom‐up synthesis of unsaturated high‐density polyethylene (HDPE) via copolymerization of ethylene with dimethyl 7‐oxabicyclo[2.2.1]hepta‐2,5‐diene‐3,5‐dicarboxylate followed by post‐polymerization retro‐Diels–Alder to unveil hidden double bonds in the polymer backbone. The incorporation of this “Trojan Horse” comonomer was varied and a series of unsaturated HDPE polymers with block lengths of 1.2, 1.9, and 3.5 kDa between double bonds was synthesized. Cross metathesis of unsaturated HDPE samples with 2‐hydroxyethyl acrylate yielded telechelic ester terminated PE macromonomers suitable for the preparation of ester‐linked PE. These materials were depolymerized and repolymerized, making them suitable candidates for chemical recycling. The ester‐linked PE displayed thermal and mechanical properties comparable to commercial HDPE.

Parke, Sarah M.↗
DOE OSTI2023

Polyethylene Incorporating Diels–Alder Comonomers: A “Trojan Horse” Strategy for Chemically Recyclable Polyolefins

Polyolefins with periodic unsaturation in the backbone chain are sought after for synthesizing chemically recyclable polymers or telechelic polyolefin macromonomers. Here we introduce a bottom-up synthesis of unsaturated high-density polyethylene (HDPE) via copolymerization of ethylene with dimethyl 7-oxabicyclo[2.2.1]hepta-2,5-diene-3,5-dicarboxylate followed by post-polymerization retro-Diels–Alder to unveil hidden double bonds in the polymer backbone. The incorporation of this “Trojan Horse” comonomer was varied and a series of unsaturated HDPE polymers with block lengths of 1.2, 1.9, and 3.5 kDa between double bonds was synthesized. Cross metathesis of unsaturated HDPE samples with 2-hydroxyethyl acrylate yielded telechelic ester terminated PE macromonomers suitable for the preparation of ester-linked PE. These materials were depolymerized and repolymerized, making them suitable candidates for chemical recycling. Here, the ester-linked PE displayed thermal and mechanical properties comparable to commercial HDPE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗