SEARCH · Search NASA

Results for “Reusable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2015

Payload Performance Analysis for a Reusable Two-Stage-to-Orbit Vehicle

This paper investigates a unique approach in the development of a reusable launch vehicle where, instead of designing the vehicle to be reusable from its inception, as was done for the Space Shuttle, an expendable two stage launch vehicle is evolved over time into a reusable launch vehicle. To accomplish this objective, each stage is made reusable by adding the systems necessary to perform functions such as thermal protection and landing, without significantly altering the primary subsystems and outer mold line of the original expendable vehicle. In addition, some of the propellant normally used for ascent is used instead for additional propulsive maneuvers after staging in order to return both stages to the launch site, keep loads within acceptable limits and perform a soft landing. This paper presents a performance analysis that was performed to investigate the feasibility of this approach by quantifying the reduction in payload capability of the original expendable launch vehicle after accounting for the mass additions, trajectory changes and increased propellant requirements necessary for reusability. Results show that it is feasible to return both stages to the launch site with a positive payload capability equal to approximately 50 percent of an equivalent expendable launch vehicle. Further discussion examines the ability to return a crew/cargo capsule to the launch site and presents technical challenges that would have to be overcome.

Tartabini, Paul V.↗

NASA NTRSDate not supplied

Developments on Reusable TPS Materials Based Upon Shuttle Tile

The insulating tiles used on the Space Shuttler Orbiter, principally AETB (Alumina Enhanced Thermal Barrier), have been seen by new vehicle developers in the aerospace industry as a fast-track approach for fielding a reusable thermal protection system (TPS) given the extensive use by both the Orbiter program and the current Orion vehicle. NASA has, and is, supporting the industry through technology transfer and commercial crew and payloads programs. However, the reusable TPS community is rapidly encountering challenges rooted in Orbiter’s and Orion’s dependence on legacy material and processes. With the aim of alleviating these issues, improving availability of reusable TPS, and strengthening the nation’s space economy, ongoing efforts at NASA Ames have focused on understanding process-property relationships in AETB as well as novel materials and technologies for reusable TPS. The first portion of this talk will address the effects of raw materials and processing conditions on the properties of AETB-8, including the raw materials used, mixing and casting parameters, and thermal history. Understanding these relationships, and how they extend to aerothermal performance, is instrumental in alleviating supply chain constraints and improving manufacturability. The implications of these finding on development of novel TPS materials and systems will be discussed. AETB will likely continue to fill a niche of relatively high performance with associated costs. There exists, therefore, a gap in developed reusable TPS for a lower cost, moderate performing material system. The later portion of this talk will touch on current development efforts at Ames focusing on reduced cost and ease of integration, which are being pursued in addition to AETB and higher performing systems. In addition to summarizing these efforts, an outlook for these projects and collaborations will be given.

Peter Edward Marshall↗

NASA NTRSDate not supplied

Developments on Reusable TPS Materials Based Upon Shuttle Tile

Thermal Protection Systems↗

DOE OSTI2021

Reusability First: Toward FAIR Workflows

The FAIR principles of open science (Findable, Accessible, Interoperable, and Reusable) have had transformative effects on modern large-scale computational science. In particular, they have encouraged more open access to and use of data, an important consideration as collaboration among teams of researchers accelerates and the use of workflows by those teams to solve problems increases. How best to apply the FAIR principles to workflows themselves, and software more generally, is not yet well understood. We argue that the software engineering concept of technical debt management provides a useful guide for application of those principles to workflows, and in particular that it implies reusability should be considered as ‘first among equals’. Moreover, our approach recognizes a continuum of reusability where we can make explicit and selectable the tradeoffs required in workflows for both their users and developers.To this end, we propose a new abstraction approach for reusable workflows, with demonstrations for both synthetic workloads and real-world computational biology workflows. Through application of novel systems and tools that are based on this abstraction, these experimental workflows are refactored to rightsize the granularity of workflow components to efficiently fill the gap between end-user simplicity and general customizability. Our work makes it easier to selectively reason about and automate the connections between trade-offs across user and developer concerns when exposing degrees of freedom for reuse. Additionally, by exposing fine-grained reusability abstractions we enable performance optimizations, as we demonstrate on both institutional-scale and leadership-class HPC resources.

Wolf, Matthew↗

NASA NTRS1985

Design optimization for a space based, reusable orbit transfer vehicle

Future NASA and DOD missions will benefit from high performance, reusable orbit transfer vehicles. With the advent of a space station, advanced engine technology, and various new vehicle concepts, reusable orbit transfer vehicles that provide significant economic benefits and mission capability improvements will be realized. Engine and vehicle design criteria previously have lacked definition with regard to issues such as space basing and servicing, man-rating and reliability, performance, mission flexibility, and life cycle cost for a reusable vehicle. The design study described here has resulted in the definition of a reusable orbit transfer vehicle concept and subsequent recommendations for the design criteria of an advanced LO2/LH2 engine. These design criteria include number of engines per vehicle, nozzle design, etc. The major characteristics of the vehicle preliminary design include low lift to drag aerocapture capability, a main propulsion system failure criteria of fail operational/fail safe, and either two main engines with a high performance attitude control system for back-up or three main engines with which to meet this failure criteria. In addition, a maintenance approach has been established for the advanced vehicle concept.

Redd, L.↗

NASA NTRS1995

Damage-mitigating control of a reusable rocket engine for high performance and extended life

The goal of damage mitigating control in reusable rocket engines is to achieve high performance with increased durability of mechanical structures such that functional lives of the critical components are increased. The major benefit is an increase in structural durability with no significant loss of performance. This report investigates the feasibility of damage mitigating control of reusable rocket engines. Phenomenological models of creep and thermo-mechanical fatigue damage have been formulated in the state-variable setting such that these models can be combined with the plant model of a reusable rocket engine, such as the Space Shuttle Main Engine (SSME), for synthesizing an optimal control policy. Specifically, a creep damage model of the main thrust chamber wall is analytically derived based on the theories of sandwich beam and viscoplasticity. This model characterizes progressive bulging-out and incremental thinning of the coolant channel ligament leading to its eventual failure by tensile rupture. The objective is to generate a closed form solution of the wall thin-out phenomenon in real time where the ligament geometry is continuously updated to account for the resulting deformation. The results are in agreement with those obtained from the finite element analyses and experimental observation for both Oxygen Free High Conductivity (OFHC) copper and a copper-zerconium-silver alloy called NARloy-Z. Due to its computational efficiency, this damage model is suitable for on-line applications of life prediction and damage mitigating control, and also permits parametric studies for off-line synthesis of damage mitigating control systems. The results are presented to demonstrate the potential of life extension of reusable rocket engines via damage mitigating control. The control system has also been simulated on a testbed to observe how the damage at different critical points can be traded off without any significant loss of engine performance. The research work reported here is built upon concepts derived from the disciplines of Controls, Thermo-fluids, Structures, and Materials. The concept of damage mitigation, as presented in this report, is not restricted to control of rocket engines. It can be applied to any system where structural durability is an important issue.

Ray, Asok↗

NASA NTRS1995

The reusable launch vehicle technology program

Today's launch systems have major shortcomings that will increase in significance in the future, and thus are principal drivers for seeking major improvements in space transportation. They are too costly; insufficiently reliable, safe, and operable; and increasingly losing market share to international competition. For the United States to continue its leadership in the human exploration and wide ranging utilization of space, the first order of business must be to achieve low cost, reliable transportatin to Earth orbit. NASA's Access to Space Study, in 1993, recommended the development of a fully reusable single-stage-to-orbit (SSTO) rocket vehicle as an Agency goal. The goal of the Reusable Launch Vehicle (RLV) technology program is to mature the technologies essential for a next-generation reusable launch system capable of reliably serving National space transportation needs at substantially reduced costs. The primary objectives of the RLV technology program are to (1) mature the technologies required for the next-generation system, (2) demonstrate the capability to achieve low development and operational cost, and rapid launch turnaround times and (3) reduce business and technical risks to encourage significant private investment in the commercial development and operation of the next-generation system. Developing and demonstrating the technologies required for a Single Stage to Orbit (SSTO) rocket is a focus of the program becuase past studies indicate that it has the best potential for achieving the lowest space access cost while acting as an RLV technology driver (since it also encompasses the technology requirements of reusable rocket vehicles in general).

Cook, S.↗

NASA NTRS1999

Technology Maturity Towards Highly Reusable Space Transportation Goals

The National Aeronautics and Space Administration's (NASA) Advanced Space Transportation Program (ASTP) has advanced key propulsion and launch vehicle systems technologies towards enabling the concepts identified by the Highly Reusable Space Transportation (HRST) Study as having significant potential for reducing the cost of access to space. The Marshall Space Flight Center (MSFC) manages the ASTP for the NASA Aero-Space Technology Enterprise. The HRST Study was conducted from 1995 through 1997 to evaluated launch concepts with the potential to reduce launch cost to $100 to $200 per pound of payload to low Earth orbit in the 2016 to 2022 timeframe. The HRST represents a generation of launch vehicles beyond the Lockheed-Martin VentureStar concept with a goal of another factor of ten reduction in launch cost below the next generation Reusable Launch Vehicle. Several concepts were developed and evaluated during the initial HRST studies. At the completion of the concept development phase in 1997, four task forces were formed to integrate the results of the study. These task forces were System Concept Definition, Operations Assessment. Cost Assessment and Technology Assessment. The Operations Assessment task force published its final report in November 1998. The Operations Assessment task force evaluated both single stage to orbit (SSTO) and two-stage to orbit (TSTO) concepts. SSTO concepts included horizontal takeoff and horizontal landing, vertical takeoff and vertical landing and vertical takeoff and horizontal landing. Horizontally launched concepts including launch assist options. SSTO concepts included airbreathing and all rocket as well as combination propulsion systems. The Operations Assessment considered the significance of performance margin, flight rate capability, reliability, launch assist, design optimization and technology development. These studies serve as a guide for the ASTP to prioritize technology development towards future highly reusable launch systems. Although the ASTP supports the development of technology that is focused at a near term fully reusable launch vehicle, the core of the technology development is looking ahead to future generations of launch vehicles that will enable dramatic growth in civil and commercial space enterprise. The primary focus of the paper is to status the key enabling technologies including rocket based combined cycle (RBCC) propulsion, magnetic launch assist, long life, low weight rocket propulsion, integral hot structures. robust thermal protection systems and integrated vehicle health management. The ASTP technology roadmap is leading rapidly towards system demonstration and eventual future X vehicle flight demonstrations.

Lyles, Garry↗

NASA NTRS2003

Operational Issues in the Development of a Cost-Effective Reusable LOX/LH2 Engine

The NASA Space Launch Initiative (SLI) was initiated in early 2001 to conduct technology development and to reduce the business and technical risk associated with developing the next-generation reusable launch system. In the field of main propulsion, two LOXLH2 rocket engine systems, the Pratt & Whitney / Aerojet Joint Venture (JV) COBRA and the Rocketdyne RS-83, were funded to develop a safe, economical, and reusable propulsion system. Given that a large-thrust reusable rocket engine program had not been started in the U.S. since 1971, with the Space Shuttle Main Engine (SSME), this provided an opportunity to build on the experience developed on the SSME system, while exploiting advances in technology that had occurred in the intervening 30 years. One facet of engine development that was identified as being especially vital in order to produce an optimal system was in the areas of operability and maintainability. In order to achieve the high levels of performance required by the Space Shuttle, the SSME system is highly complex with very tight tolerances and detailed requirements. Over the lifetime of the SSME program, the engine has required a high level of manpower to support the performance of inspections, maintenance (scheduled and unscheduled) and operations (prelaunch and post-flight). As a consequence, the labor- intensive needs of the SSME provide a significant impact to the overall cost efficiency of the Space Transportation System (STS). One of the strategic goals of the SLI is to reduce cost by requiring the engine(s) to be easier (Le. less expensive) to operate and maintain. The most effective means of accomplishing this goal is to infuse the operability and maintainability features into the engine design from the start. This paper discusses some of the operational issues relevant to a reusable LOx/LH2 main engine, and the means by which their impact is mitigated in the design phase.

Ballard, Richard O.↗

NASA NTRS2011

Reusable Solid Rocket Motor - Accomplishments, Lessons, and a Culture of Success

The Reusable Solid Rocket Motor represents the largest solid rocket motor ever flown and the only human rated solid motor. Each Reusable Solid Rocket Motor (RSRM) provides approximately 3-million lb of thrust to lift the integrated Space Shuttle vehicle from the launch pad. The motors burn out approximately 2 minutes later, separate from the vehicle and are recovered and refurbished. The size of the motor and the need for high reliability were challenges. Thrust shaping, via shaping of the propellant grain, was needed to limit structural loads during ascent. The motor design evolved through several block upgrades to increase performance and to increase safety and reliability. A major redesign occurred after STS-51L with the Redesigned Solid Rocket Motor. Significant improvements in the joint sealing systems were added. Design improvements continued throughout the Program via block changes with a number of innovations including development of low temperature o-ring materials and incorporation of a unique carbon fiber rope thermal barrier material. Recovery of the motors and post flight inspection improved understanding of hardware performance, and led to key design improvements. Because of the multidecade program duration material obsolescence was addressed, and requalification of materials and vendors was sometimes needed. Thermal protection systems and ablatives were used to protect the motor cases and nozzle structures. Significant understanding of design and manufacturing features of the ablatives was developed during the program resulting in optimization of design features and processing parameters. The project advanced technology in eliminating ozone-depleting materials in manufacturing processes and the development of an asbestos-free case insulation. Manufacturing processes for the large motor components were unique and safety in the manufacturing environment was a special concern. Transportation and handling approaches were also needed for the large hardware segments. The reusable solid rocket motor achieved significant reliability via process control, ground test programs, and postflight assessment. Process control is mandatory for a solid rocket motor as an acceptance test of the delivered product is not feasible. Process control included process failure modes and effects analysis, statistical process control, witness panels, and process product integrity audits. Material controls and inspections were maintained throughout the sub tier vendors. Material fingerprinting was employed to assess any drift in delivered material properties. The RSRM maintained both full scale and sub-scale test articles. These enabled continuous improvement of design and evaluation of process control and material behavior. Additionally RSRM reliability was achieved through attention to detail in post flight assessment to observe any shift in performance. The postflight analysis and inspections provided invaluable reliability data as it enables observation of actual flight performance, most of which would not be available if the motors were not recovered. These unique challenges, features of the reusable solid rocket motor, materials and manufacturing issues, and design improvements will be discussed in the paper.

Moore, Dennis R.↗

NASA NTRSDate not supplied

Computationally Guided Design of Polymer-Coated Microparticles as Reusable Materials

Long-duration space exploration missions and sustained lunar or Martian surface operations present greater demands for multifunctional and reusable materials. By scaling down the amount of material to be launched from Earth, both mission cost and risk can be reduced. In this regard, leveraging in-space manufacturing capabilities with reusable feedstock materials is an attractive option, as it will allow for articles to be generated on demand, utilized, and then recycled for additional use. NASA’s Enabling Sustained Presence Using Recyclables (ESPUR) project aims to develop reusable materials using polymer-coated microparticles that are bonded via reversible Diels-Alder reactions, where only modest heat is needed to trigger the reverse reaction and enable reuse. For proof-of-concept demonstration, research is currently focused on the fabrication of epoxy microparticles that contain a copoly(carbonate urethane) coating with maleimide and furan functionalities. Here, we discuss the integration of computational materials modeling approaches to help navigate the large design space in this development effort. We perform molecular dynamics (MD) simulations with atomistic and coarse-grained models of the copolymer, which allow us to evaluate the effects of design parameters like the molecular weight and composition on the molecular interactions and chain dynamics. We show how the properties change with the reversible bonds. We also leverage discrete element method (DEM) simulations to assess how microparticle design parameters like the size ratio and volume fraction can be tuned to increase the packing density and number of microparticle contacts to improve the mechanical properties. Our results demonstrate how computational tools can be used in close collaboration with experimental efforts to accelerate material design.

reusable materials↗

NASA NTRSDate not supplied

Modernization of Insulative Reusable Thermal Protection Systems (IRTPS)

Insulative thermal protection systems, such as Flexible Reusable Surface Insulation blankets and High Temperature Reusable Surface Insulation tiles, were developed for the Shuttle Orbiter to enable reuse of the vehicle for low-earth orbit missions. Since reusability is essential to many new industry launch and space vehicles, Shuttle-derived thermal protection materials (TPMs) are being sought for their flight proven performance. Alumina Enhanced Thermal Barrier (AETB) is the state-of-the-art tile material that was developed in the 90’s. AETB along with associated coatings, reaction cured glass (RCG) and Toughened Unipiece Fibrous Insulation (TUFI), are currently made by NASA using heritage raw materials derived from lifetime purchases. Finding viable replacements for raw materials that have changed in nature or are obsolete is important for continuation of these TPMs. In some cases, the use of modern raw materials has been shown to yield tile with reduced performance, most notably in mechanical properties. In this work, the production of AETB will be discussed to better understand the process-structure-property relationships and for allowing use of these modern alternatives. A small-scale tile casting system was developed for rapid and efficient exploration of the manufacturing variables such raw material selection and pre-processing, casting process parameters, and billet firing protocols. An optical transmission defect characterization technique was implemented to correlate process variables to structure. Comparisons between TUFI/RCG coated AETB derived from heritage and modern raw materials will be shown including AHF arc jet test results completed under a collaboration with Stratolaunch.

thermal protection materials↗

DOE OSTI2021

Reusable Catalysts for Hydroformylation‐Based Reactions

Abstract Catalytic hydroformylation is an important reaction, widely studied by academics and applied in the chemical industry, and it is a paradigmatic example of a chemical reaction that is aligned with most of the Green Chemistry principles. In the last years, the global requirement for more sustainable chemical processes has boosted the development of more active, selective, and reusable hydroformylation catalysts. In this review, we highlight the most recent advances regarding the creation and expansion of reusable catalysts for hydroformylation and sequential processes that use hydroformylation as central reaction. The most relevant strategies for immobilization of hydroformylation catalysts are discussed, along with a critical analysis of their application in synthesis, based on catalytic activity, selectivity, and reusability.

Rodrigues, Fábio M. S.↗

DOE OSTI2023

High throughput, spatially resolved thermal properties measurement using attachable and reusable 3ω sensors

The 3ω method is a well-established thermal technique used to measure the thermal conductivity of materials and the thermal resistance of interfaces. It has significant advantages over other steady state and transient thermal techniques in its ability to provide spatially resolved thermal property measurements over a wide range of thermal conductivity. Despite its advantages, it has been restricted to lab-scale use because of the difficulty involved in sample preparation and sensor fabrication and is limited to non-metallic substrates. High-throughput 3ω measurements with reusable sensors have not been realized yet. In this work, we demonstrate a method of applying reusable 3ω sensors fabricated on flexible polyimide films to measure bulk and spatially resolved thermal properties. Here, we establish the limits of thermal conductivity measurement with the method to be 1 to 200 W/mK, and within the measurement limit, we verify the method by comparing the measured thermal conductivities of standard samples with established values. From the 3ω measurements, we also determine the thermal resistance of an interlayer of thermal grease as a function of pressure and compare it against the resistance calculated from direct thickness measurements to demonstrate the ability of this method to provide spatially resolved subsurface information. The technique presented is general and applicable to both metallic and non-metallic substrates, providing a method for high-throughput 3ω measurements with reusable sensors and without considerable sample preparation.

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

Unlocking the benefits of transparent and reusable science for climate-risk management

People around the world seek climate-risk information to guide their decisions. For instance, projections about future flood risk inform where households choose to live, how lenders manage credit risks, and which communities receive federal funding. Yet data limitations and fundamental validation challenges raise important concerns about the reliability of such projections. The principles of transparency and reusability help address these concerns by enabling scrutiny of assumptions and methods, development of foundational data and tools, and consistent application of evaluation standards. While there is ongoing debate about how much transparency commercial climate-risk services should provide, many expect non-commercial actors to lead the way on operationalizing transparency and reusability to fulfill their knowledge-building role in the climate-risk ecosystem. However, despite prominent success stories, we find a substantial gap between principles and practice: only four percent of the most-cited peer-reviewed climate-risk studies in recent years fully share their data and code despite this being a widely accepted minimum standard for transparency. We highlight low-cost measures that non-commercial researchers can take now to improve transparency and reusability. We also emphasize that transformative progress requires substantial investment, cross-sector collaboration, and careful consideration of tradeoffs, data rights, and multiple perspectives on equity. We hope this perspective accelerates both immediate actions and longer-term conversations to improve the ability of science to effectively support timely, evidence-based, and sound climate-risk management.

Open Science↗

NASA NTRS1967

Reusable Aerospace Passenger Transport - Study of Incremental Development Approaches Summary Report

This report summarizes the results of studies of economical orbital transportation systems, exploring, in particular , possible options for time - phases and incremental development of such systems. The major conclusions are : 1. Incremental development is a practical way for development of an economic logistics system, minimizing development risk and annual funding, and offering planning flexibility at only a nominal penalty in total systems cost. 2. The most promising first development appears to be that of a re- usable payload carrier with a capacity of 9 to 12 passengers. 3. Systems comparisons show that, for the foreseeable variations of the mission market, a partially reusable concept could bring about most of the program savings that can be expected from reusability at moderate development risk and funding rate. 4. A further development leading to a fully reusable system has high risk and uncertain payoff. Conceivably, at that time, a more advanced concept might be introduced.

Dietrich W Fellenz↗

NASA NTRS1973

Condition monitoring helps make the Space Shuttle Main Engine reusable

The Space Shuttle Main Engine (SSME) is a reusable, high-performance liquid-propellant rocket engine being developed for the Space Shuttle Orbiter Vehicle. The SSME has been designed for long life, rapid postflight maintenance, and a fast vehicle turnaround cycle of 160 hours. To meet the unique reusability requirements, the SSME considers maintainability and condition monitoring much as airlines do today. The condition monitoring capabilities designed into this engine are discussed with major emphasis on internal inspection and techniques which ensure the reusability of the SSME.

Lacroix, W. P.↗

NASA NTRS1975

SERV - A reusable single stage to orbit space shuttle concept

Feasibility studies were made on the SERV (Single-stage Earth-orbital Reusable Vehicle), which is a single-stage, fully reusable space shuttle concept. The studies show that a reusable single-stage-to-orbit shuttle can be built using present technology. The SERV satisfies all of NASA's requirements for low earth orbital and space station resupply missions. The baseline vehicle has a modified Apollo external configuration, 90 ft in diameter and 66 ft in height, with a cargo hold 23 ft in diameter and 60 ft long. Take-off is vertical, powered by an integral aerospike rocket engine. An Apollo-type ballistic reentry profile is used, and precision vertical landing is possible with power provided by an array of turbojet engines. The key feasibility issues discussed are engine performance, aerodynamic drag, subsystem weights, method and type of thermal protection during reentry, descent aerodynamic characteristics, and landing method.

Tharratt, C. E.↗