Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rheometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Enhanced gel formation in binary mixtures of nanocolloids with short-range attraction

Colloidal suspensions transform between fluid and disordered solid states as parameters such as the colloid volume fraction and the strength and nature of the colloidal interactions are varied. Seemingly subtle changes in the characteristics of the colloids can markedly alter the mechanical rigidity and flow behavior of these soft composite materials. This sensitivity creates both a scientific challenge and an opportunity for designing suspensions for specific applications. In this paper, we report a novel mechanism of gel formation in mixtures of weakly attractive nanocolloids with modest size ratio. Employing a combination of x-ray photon correlation spectroscopy, rheometry, and molecular dynamics simulations, we find that gels are stable at remarkably weaker attraction in mixtures with size ratio near two than in the corresponding monodisperse suspensions. In contrast with depletion-driven gelation at larger size ratio, gel formation in the mixtures is triggered by microphase demixing of the species into dense regions of immobile smaller colloids surrounded by clusters of mobile larger colloids that is not predicted by mean-field thermodynamic considerations. These results point to a new route for tailoring nanostructured colloidal solids through judicious combination of interparticle interaction and size distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Non‐Conjugated Flexible Linkers in Semiconducting Polymers: A Pathway to Improved Processability without Compromising Device Performance

Semiconducting polymers, in contrast to inorganic silicon, are solution processable and can potentially be printed cost efficiently on flexible large‐area substrates. However to do so it is of paramount importance to formulate the polymeric semiconductors into inks with specific viscosities. Herein, the synthesis of a new highly soluble isoindigo monomer and its incorporation into low bandgap semiconducting polymers is presented. Non‐conjugated flexible linkers are introduced into the conjugated backbone in order to modulate the materials processability. The viscoelastic properties of the new polymers are studied in detail by means of rheometry and dynamical mechanical analysis. The solution viscosity is directly proportional to the content of non‐conjugated linkers in the polymer backbone. In organic field‐effect transistors maximum hole mobilities of 1.7 cm 2 V −1 s −1 are achieved with the new polymers. Due to the enhanced solubility all‐polymer solar cells are fabricated by solution shearing, reaching power conversion efficiency values of 3.7%.

Schroeder, Bob C.↗
DOE OSTI2022

Controlling Rheology of Fluid Interfaces through Microblock Length of Sequence-Controlled Amphiphilic Copolymers

Previous studies have demonstrated that films of sequence-controlled amphiphilic copolymers display contact angles that depend on microblock size. This suggests that microblock length may provide a means of tuning surface and interfacial properties. In this work, the interfacial rheology of a series of sequence-controlled copolymers, prepared through the addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) and cyclohexene (monomer B) to generate sequences up to 24 monomeric units composed of (A m B n ) i microblocks, where m, n, and i range from 1 to 6. Interfacial rheometry is used to measure the mechanical properties of an air–water interface with these copolymers. As the microblock size increases, the interfacial storage modulus, G', increases, which may be due to an increase in the size of interfacial hydrophobic domains. Small-angle X-ray scattering shows that the copolymers have a similar conformation in solution, suggesting that any variations in the mechanics of the interface are due to assembly at the interface, and not on solution association or bulk rheological properties. This is the first study demonstrating that microblock size can be used to control interfacial rheology of amphiphilic copolymers. Here, the results provide a new strategy for controlling the dynamics of fluid interfaces through precision sequence-controlled polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Versatile Approach to Stabilize Liquid–Liquid Interfaces using Surfactant Self-Assembly

Stabilizing liquid–liquid interfaces, whether between miscible or immiscible liquids, is crucial for a wide range of applications, including energy storage, microreactors, and biomimetic structures. Here, in this study, a versatile approach for stabilizing the water-oil interface is presented using the morphological transitions that occur during the self-assembly of anionic, cationic, and nonionic surfactants mixed with fatty acid oils. The morphological transitions underlying this approach are characterized and extensively studied through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. Dissipative particle dynamics (DPD) as a simulation tool is adopted to investigate these morphological transitions both in the equilibrium ternary system as well as in the dynamic condition of the water-oil interface. Such a versatile strategy holds promise for enhancing applications such as liquid-in-liquid 3D printing. Moreover, it has the potential to revolutionize a wide range of fields where stabilizing liquid–liquid interfaces not only offers unprecedented opportunities for fine-tuning nanostructural morphologies but also imparts interesting practical features to the resulting liquid shapes. These features include perfusion capabilities, self-healing, and porosity, which could have significant implications for various industries.

36 MATERIALS SCIENCE↗
DOE OSTI2017

In-Process Measurements of Flow Characteristics of Wood Plastic Composites

The flow characteristics of polypropylene filled with high percentages of wood flour (50 and 70 wt%) are investigated at a feasible processing temperature (195 °C). Rotational rheometry in oscillatory mode in conjunction with the Cox–Merz rule is ineffective at this temperature due to insufficient linear viscoelastic region (LVR) size and ease of fibres degradation. An in-line rheometer, directly attached to a single screw extruder, is used to avoid these problems: this method allows measurements in real processing conditions with no LVR issues and with reduced degradation risks. The 70 wt% displays plug flow, thus it has been impossible to obtain the flow curve but only the slip velocity as a function of shear stress. The 50 wt% could be corrected for slip using the Mooney procedure. Comparing the flow curve of this material with the ones of the 30 wt% and the unfilled polypropylene matrix, a single master-curve can be obtained and modelled with a Carreau–Yasuda equation.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Enhancing the Melt Strength of Poly(Lactic Acid) via Micro-Crosslinking and Blending with Poly(Butylene Adipate-co-Butylene Terephthalate)for the Preparation of Foams

The melt strength of poly(lactic acid) (PLA) is an important factor in preparing foams and blowing films. Aiming to endow PLA with a suitable melt strength via a slight crosslink, a superficial micro-crosslinking method was introduced in which the PLA feed was mixed with benzoyl peroxide (BPO) and crosslinked in a 100 °C oven for 1 h. Additionally, poly(butyleneadipate-co-terephthalate) (PBAT) was blended with the crosslinked PLA (C-PLA) to further improve melt strength and viscosity. The blend foams were prepared using a single-screw extruder and azodicarbonamide as a foaming agent. The properties were characterized by gel fraction, melt flow rate (MFR), rheometry, DSC and SEM. The rheological results showed that the complex viscosity and storage modulus of C-PLA and C-PLA/PBAT blends increased, attributed to the micro-crosslinking and addition of PBAT and indicating an improvement in melt strength. Furthermore, the crystallization of modified PLA was also enhanced. Compared with pure PLA foams, the C-PLA/PBAT blend foams showed larger cells with more uniform shapes and homogenous distribution. This approach to improve the melt strength of polymers with micro-crosslinking and blending with PBAT represents an attractive method for preparing foams with regular cells.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Preparation of Low-Density Microcellular Foams from Recycled PET Modified by Solid State Polymerization and Chain Extension

Recycled polyethylene-terephthalate (RPET) bottle regrinds were physically foamed after two types of industrially feasible molecular weight increasing processes. Intrinsic viscosity (IV) of initial waste (0.71 dL/g) increased both after reactive extrusion carried out using a multifunctional epoxy-based chain extender (0.74 dL/g) and after solid state polycondensation (SSP) (0.78 dL/g), while capillary rheometry revealed higher degree of branching in the chain extended PET material. Despite the relatively low IV values (below 0.80 dL/g), physical foaming, a mild and cost-efficient way, was successful in both cases, uniform microcellular foam structures with void fractions ranging between 75 and 83% were achieved. During the experiments morphology change in the materials was tracked by differential scanning calorimetry (DSC) besides recording IV values. The IV drop during foaming was between 0.03 and 0.10 depending on the pre-processing technology. Structure of foams produced from the two different modified RPET materials was compared with each other based on scanning electron microscopic imaging of cryogenic fracture surfaces. The average cell diameters were measured to be 213 and 360 µm in the case of chain extended and SSP-modified materials, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Linking thermoset ink rheology to the stability of 3D-printed structures

Thermoset polymer composites show promise for additive manufacturing (AM) applications to address some of the limitations of the more widely used thermoplastic feedstock materials. Thermosets offer attractive mechanical properties while providing excellent interlayer bonding, high thermal and chemical stability, and reduced energy consumption as a result of deposition at room temperature. However, since thermoset resins rely on a crosslinking reaction to solidify, rather than quickly cooling like thermoplastics, viscoelastic properties must be relied upon to maintain deposited shape after deposition until crosslinking can occur. This fact has not impeded development and characterization of new thermoset feedstocks on the small scale, but recent efforts to increase scale of thermoset printing have highlighted issues with structural stability under self-weight. This study addresses issues of self-weight by investigating the mechanisms that cause collapse of tall, thin printed walls. Using nanoclay- and fumed silica-filled epoxy feedstocks, this work compares the collapse height for printed walls to stability models based on yielding and buckling mechanics. Inputs for these models – shear yield stress and storage modulus – were taken directly from parallel plate rheometry measurements. Model predictions were found to be in good agreement with experimental results, where both yielding and buckling behavior were observed, provided the rheological properties after a shear excursion were used as inputs. This work establishes a direct link between basic rheological properties of the feedstock, geometry of the printed object, and achievable height. Overall, the results presented highlight the importance of understanding recovery behavior in thermoset feedstocks and provide valuable guidance on the development of more effective direct-ink writing feedstock materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application

Among the multiplicity of construction methods based on digital concrete technologies, the most common one remains the extrusion-based process. Two opposed strategies have been developed in order to print a concrete structure using extrusion: the first one emphasizes the ease-of-pumping of material which is massively accelerated to ensure the stability of the structure, when leaving the extruder; the second one uses a firm mortar able to sustain the own weight of the structure during the printing, without requiring any accelerator. Both methods have their pros and cons and don't imply the same rheological requirements. Most of the recent literature assumes that both types of material (fluid and firm) follow the same trend of behavior and obey to the Von Mises plasticity criterion, while it has been demonstrated that firm cement-based materials can exhibit a pressure dependent behavior. Moreover, rheological study is mainly based on shear rheometry, while the extrusion-based printing process requires a description of the rheological behavior in compression to predict the global stability of the structure, and in tension to prevent cracks formation. This paper investigates the fresh behavior of cement paste and mortar under different solicitations (shear, compression, tension) for different water to cement ratios. The analysis of these results allows to describe the transition between a ductile fluid material (symmetrical in tension and compression) that obeys to a Von Mises plasticity criterion, and a brittle and firm material (asymmetrical in tension and compression) that requires a pressure dependent plasticity criterion in order to predict its strength under a given solicitation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unexpected Conformational Behavior of Poly(poly(ethylene glycol) methacrylate)-Poly(propylene carbonate)-Poly(poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA) Amphiphilic Block Copolymers in Micellar Solution and at the Air-Water Interface

Self-assemblies (bulk micelles and Langmuir monolayers) of a new amphiphilic block copolymer, poly(poly(ethylene glycol) methacrylate)-poly(propylene carbonate)-poly(poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA), were investigated in dilute aqueous solution and at the air-water interface. An important feature that distinguishes PPEGMA-PPC-PPEGMA from conventional linear PEG-based polymer surfactants is that in the hydrophilic PPEGMA block the PEG moieties exist as side chains attached to the poly(methacrylate) (PMA) backbone. This study was performed using three PPEGMA-PPC-PPEGMA samples having an identical PPC molecular weight (5.6 kDa) and different PPEGMA molecular weights (7.3, 2.8 and 2.1 kDa on either side) (named as “G7C6G7”, “G3C5G3”, and “G2C6G2”, respectively). Cryo-TEM images revealed that G2C6G2 micelles form large clusters, whereas G7C6G7 micelles exist as unimers; the behavior of G3C6G3 is intermediate. The average core surface distance between two adjacent G2C6G2 micelles in a cluster was estimated to be only about 3.7 nm, which suggests that in the micelle corona layer only the PEG side chains (but not the PMA backbone) exist as hydrated brush chains. A calculation showed that at the small micelle separation distance observed, the van der Waals attractive forces become significant, and are thus likely responsible for the cluster formation. Steady shear rheometry measurements confirmed that G2C6G2 micelles are indeed only weakly bound in clusters, and these micelle clusters are thus prone to breakup even under mild steady shear. The micelle breakup force estimated from the shear viscosity data is in reasonable agreement with an estimate obtained from the theoretical van der Waals interaction potential. Langmuir monolayers formed at the air-water interface by PPEGMA-PPC-PPEGMA were also characterized; surface pressure-area measurements were performed. Detailed features of the surface pressure-area isotherms further supported that only the PEG side chains are hydrated in the subphase, while the PMA backbone remains unhydrated and situated on the water surface.

Lee, Jaewon↗
DOE OSTI2025

Application of lipid-stabilized liquid-liquid interfaces in 3D printing of biomaterials

Developing strategies to stabilize liquid-liquid interfaces is essential for advancing applications in various biomedical systems. This study introduces a novel biocompatible in situ-forming material in which lipid self-assembly stabilizes water–oil interfaces, enabling controlled structuring of liquids through liquid-in-liquid 3D printing. The stabilization process, driven by the formation of nanostructures at the interface, is thoroughly analyzed through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. This material system enables the fabrication of complex 3D constructs, including fibers, substrates, and microneedle patches, which exhibit outstanding mechanical properties and biocompatibility, as confirmed by tensile testing and cell viability tests. Here, by leveraging the unique properties of lipid-stabilized interfaces, this work demonstrates the potential of this approach for diverse biomedical applications such as drug delivery and tissue engineering while establishing a foundation for future advancements in liquid-in-liquid 3D printing technology.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Melt-spinnable polyacrylonitrile copolymer precursors for carbon fibers

This paper describes the feasibility of achieving melt-processable polyacrylonitrile copolymer precursors for producing high strength carbon fibers. High molecular weight poly(acrylonitrile-ran-methyl acrylate) (PAN-MA) copolymers with high acrylonitrile content were mixed were various binary melting point modifiers with one component being water to produce systems that formed stable melts at temperatures below the temperature corresponding to the onset of PAN-MA crosslinking. The structure of the copolymer was 96.5 ± 0.13 mol% AN and 4.40 ± 0.13 mol % MA by 1H NMR with an Mw = 238 kDa and polydispersity of 1.9 determined by size exclusion chromatography. A reduction in the Tm of the copolymer of 200 °C was established for one of the copolymer/melting point modifier systems, which corresponds to the greatest reduction in a PAN-based copolymer melting temperature yet reported. From isothermal DSC and pressurized capillary rheometry experiments it was found that the stability of the resulting melts shows a strong temperature dependence, but does not show a strong dependence on shear-rate. Copolymer mixtures consisting of H2O and acetonitrile or adiponitrile were found to be suitable for melt-extrusion at 170 °C with viscosities ranging from 1800 to 2000 Pa*s and stabilities of the melts ≥1 h.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Conserving asphalt resources: Rethinking rejuvenator performance evaluation through peptizing efficiency

Timely rejuvenation and restoration of asphalt are essential conservation practices that help preserve and extend the service life of roads, bridges, driveways, and parking lots. The performance of asphalt rejuvenators is often assessed based on their diffusion rates and softening power, yet these metrics alone fail to capture true rejuvenation potential. Here, this study integrates density functional theory (DFT) modeling with experimental analysis to show that rejuvenation effectiveness is primarily governed by molecular interactions with oxidized asphaltene nanoaggregates. DFT results revealed that amide- and unsaturated-chain compounds, such as hexadecanamide, oleic acid, and 9,17-octadecadienal, act cooperatively to disrupt π–π stacking and exfoliate asphaltene layers, reducing binding strength and enhancing dispersion. Unlike bulky, rigid molecules that remain trapped, these components remain mobile and repeatedly interact with multiple aggregation sites. Experimental validation using rheometry and FTIR confirmed that such molecularly compatible rejuvenators restore the binder flexibility and polydispersity, even when diffusion is relatively slow. Building on this mechanistic foundation, six rejuvenators (A2, A5, A7, A8, A9, and A10) were evaluated using a three-metric performance framework encompassing cracking resistance (Glover–Rowe parameter), UV stability, and surface hydrophobicity. Among the six rejuvenators evaluated, A9 exhibited the highest overall performance, reducing the Glover–Rowe cracking parameter by 85% (from 351 kPa to 53 kPa), demonstrating the greatest resistance to UV-induced aging with a stability index of 4.17 h·kPa⁻¹, and increasing surface hydrophobicity to a contact angle of 103.6°. Its superior performance is primarily attributed to its amide- and unsaturated-chain components, which act cooperatively to disrupt π–π stacking interactions and exfoliate asphaltene layers, thereby promoting molecular deagglomeration and enhancing long-term durability. These results shift the criteria for selecting rejuvenators: effective candidates must pair the electronic capability to unlock aged asphaltenes with sufficient structural stability to resist secondary aging and restore hydrophobicity. Restoring hydrophobicity is critical, as aging reduces the asphalt’s water repellency and increases water diffusion, which in turn accelerates moisture-related damage; consequently, a high-performing rejuvenator must effectively restore the binder’s hydrophobic characteristic. Collectively, these findings provide a framework for the rational design of next-generation of bio-based rejuvenators that enhance pavement longevity and promote long-term sustainability.

Aging↗
DOE OSTI2020

Impact of Backbone Rigidity on the Thermomechanical Properties of Semiconducting Polymers with Conjugation Break Spacers

There remains a lack of fundamental understanding in theroleofbackbonerigidityonthe thermomechanical properties of conjugated polymers. Here, we provide the first holistic approach to understand the fundamental influence of backbone rigidity on an n-type naphthalene diimide-based conjugated polymer, denoted by PNDI-Cx, through insertion of a flexible conjugation break spacer (CBS). CBS lengths are varied from fully conjugated with zero alkyl spacer (PNDI-C0) to a seven- carbon alkyl spacer (PNDI-C 7 ), with the CBS engineered into each repeat unit for systematic evaluation. Solution small-angle neutron scattering and oscillatory shear rheometry were employed to provide the first quantitative evidence of CBS influence over conjugated polymer chain rigidity and entanglement molecular weight (M e ), demonstrating a reduction in the Kuhn length from 521 to 36 Å for fully conjugated PNDI-C0 and PNDI-C6, respectively, as well as a nearly consistent Me of ~15 kDa upon the addition of CBS. Thermomechanical properties, such as elastic modulus and glass-transition temperature, were shown to decrease with an increasing length of CBS. An extraordinary ductility, upwards of 400% tensile strain before fracture, was observed for high-molecular-weight PNDI-C4, which we attribute to a high number of entanglements and disruption of crystallization. Furthermore, the deformation mechanism for PNDI-Cx was studied under strain through X-ray diffraction, polarized UV-vis spectroscopy, and atomic force microscopy. Overall, this work sheds light on the important role of backbone rigidity in designing flexible and stretchable conjugated polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nondestructive Photo-Cross-Linking of Microphase-Separated Diblock Polymers through Coumarin Dimerization

The effect of long-wavelength ultraviolet photocrosslinking on microphase-separated coumarin-containing block polymers was studied by photo-rheometry and small-angle X-ray scattering. This model system consisted of three photocrosslinkable diblock polymers of poly(methoxyethyl acrylate)-b-poly(hexyl methacrylate-co-coumarin methacrylate) with different volume fractions of the crosslinkable coumarin-containing block, which microphase separated into lamellar and cylindrical morphologies. All polymers stiffened upon exposure to 365 nm light, with much greater relative increases in moduli recorded for lamellae-forming polymers (ca. 3200% increase) compared to the cylinder-forming polymer (ca. 550% increase). Disordering transitions that were evident in uncrosslinked samples were no longer observed after crosslinking in the ordered state, and domain sizes were found to remain stable to heating. The photocrosslinking reaction only proceeded under active irradiation, indicating a high degree of spatiotemporal control over curing in this system. Finally, at constant concentration of couamarin within the crosslinkable block, the cure rate was largely independent of polymer composition, suggesting a constant local concentration of coumarin moieties within the segregated crosslinkable domains. Lastly, these findings establish a set of specific structure-property relationships governing the phase-selective photocrosslinking of diblock polymers that can guide the design of robust nanostructured materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

XPCS Microrheology and Rheology of Sterically Stabilized Nanoparticle Dispersions in Aprotic Solvents

In this study, X-ray photon correlation spectroscopy (XPCS) microrheology and conventional bulk rheology were performed on silica nanoparticle dispersions associated with battery electrolyte applications to probe the properties of these specific complex materials and to explore the utility of XPCS microrheology in characterizing nanoparticle dispersions. Sterically stabilized shear-thickening electrolytes were synthesized by grafting poly(methyl methacrylate) chains onto silica nanoparticles. Coated silica dispersions containing 5–30 wt % nanoparticles dispersed in propylene carbonate were studied. In general, both XPCS microrheology and conventional rheology showed that coated silica dispersions were more viscous at higher concentrations, as expected. The complex viscosity of coated silica dispersions showed shear-thinning behavior over the frequency range probed by XPCS measurements. However, measurements using conventional mechanical rheometry yielded a shear viscosity with weak shear-thickening behavior for dispersions with the highest concentration of 30% particles. Our results indicate that there is a critical concentration needed for shear-thickening behavior, as well as appropriate particle size and surface polymer chain length, for this class of nanoparticle-based electrolytes. The results of this study can provide insights for comparing XPCS microrheology and bulk rheology for related complex fluids and whether XPCS microrheology can capture expected macroscopic rheological properties by probing small-scale particle dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks

We present a rheological investigation of fuel cell catalyst inks. The effects of ink parameters, which include carbon black-support structure, Pt presence on carbon support (Pt-carbon), and ionomer (Nafion) concentration, on the ink microstructure of catalyst inks were studied using rheometry in combination with ultrasmall-angle X-ray scattering (USAXS) and dynamic light scattering (DLS). Dispersions of a high-surface-area carbon (HSC), or Ketjen black type, demonstrated a higher viscosity than Vulcan XC-72 carbon due to both a higher internal porosity and a more agglomerated structure that increased the effective particle volume fraction of the inks. The presence of Pt catalyst on both the carbon supports reduced the viscosity through electrostatic stabilization. For carbon-only dispersions (without Pt), the addition of ionomer up to a critical concentration decreased the viscosity due to electrosteric stabilization of carbon agglomerates. However, with Pt-carbon dispersions, the addition of ionomer showed contrasting behavior between Vulcan and HSC supports. In the Pt-Vulcan dispersions, the effect of ionomer addition on the rheology was qualitatively similar to Vulcan dispersions without Pt. The Pt-HSC dispersions showed an increased viscosity with ionomer addition and a strong shear-thinning nature, indicating that Nafion likely flocculated the Pt-HSC aggregates. These results were verified using DLS and USAXS. Further, the observations of the effect of ionomer:carbon ratio and a comparison between carbons of different surface areas provided insights on the microstructure of the catalyst ink corresponding to the optimized I/C ratio for fuel cell performance reported in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microscopic dynamics underlying the stress relaxation of arrested soft materials

Arrested soft materials such as gels and glasses exhibit a slow stress relaxation with a broad distribution of relaxation times in response to linear mechanical perturbations. Although this macroscopic stress relaxation is an essential feature in the application of arrested systems as structural materials, consumer products, foods, and biological materials, the microscopic origins of this relaxation remain poorly understood. Here, we elucidate the microscopic dynamics underlying the stress relaxation of such arrested soft materials under both quiescent and mechanically perturbed conditions through X-ray photon correlation spectroscopy. By studying the dynamics of a model associative gel system that undergoes dynamical arrest in the absence of aging effects, we show that the mean stress relaxation time measured from linear rheometry is directly correlated to the quiescent superdiffusive dynamics of the microscopic clusters, which are governed by a buildup of internal stresses during arrest. We also show that perturbing the system via small mechanical deformations can result in large intermittent fluctuations in the form of avalanches, which give rise to a broad non-Gaussian spectrum of relaxation modes at short times that is observed in stress relaxation measurements. These findings suggest that the linear viscoelastic stress relaxation in arrested soft materials may be governed by nonlinear phenomena involving an interplay of internal stress relaxations and perturbation-induced intermittent avalanches.

36 MATERIALS SCIENCE↗