SEARCH · Search NASA

Results for “Rotary Wing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1978

A brief survey of rotary wing induced-velocity theory

An attempt is made to summarize the state of rotary wing flow fields. The theory is traced from its origin as a momentum theory estimate of average interference, through simple vortex theory, to its present status where it is indispensible in calculating blade loads. A comparison of the theory with flow measurements are presented. The modern efforts toward using more detailed digital methods to obtain blade load distribution are described.

Heyson, H. H.↗

NASA NTRS1986

Control and display requirements for decelerating approach and landing of fixed- and rotary-wing VSTOL aircraft

This paper reviews the results of several simulation investigations of rotary-wing and fixed-wing VSTOL aircraft performing terminal-area operations that include decelerating approaches under instrument conditions and recovery to either fixed landing pads or a ship. By concentrating on instrument decelerating approaches and the hover and landing, it is possible to compare directly the control and display requirements for similar tasks for aircraft with and without vectored thrust capability. Collectively, the results from these experiments, together with other simulator and flight experiments and operational experience, provide a consistent view of control and display complexity required for similar operational capability in adverse weather for the two types of VSTOL configurations. Some initial data showing influence of the transition corridor on flying qualities during transition are pesented and lead to a general discussion of the problem of operating margin definition.

Lebacqz, J. V.↗

NASA NTRS2006

INITIAL ASSESSMENT OF SURFACE PRESSURE CHARACTERISTICS OF TWO ROTARY WING UAV DESIGNS

This paper presents results of an experimental investigation of two rotary-wing UAV designs. The primary goal of the investigation was to provide a set of interactional aerodynamic data for an emerging class of rotorcraft. The present paper provides an overview of the test and an introduction to the test articles, and instrumentation. Sample data in the form of fixed system pressure coefficient response to changes in configuration attitude and flight condition for both rotor off and on conditions are presented. The presence of the rotor is seen to greatly affect the magnitude of the response. Pressure coefficients were measured using both conventional pressure taps and via pressure sensitive paint. Comparisons between the two methods are presented and demonstrate that the pressure sensitive paint is a promising method; however, further work on the technique is required.

Jones, Henry E.↗

NASA NTRS2008

NASA Subsonic Rotary Wing Project - Structures and Materials Discipline

The Structures & Materials Discipline within the NASA Subsonic Rotary Wing Project is focused on developing rotorcraft technologies. The technologies being developed are within the task areas of: 5.1.1 Life Prediction Methods for Engine Structures & Components 5.1.2 Erosion Resistant Coatings for Improved Turbine Blade Life 5.2.1 Crashworthiness 5.2.2 Methods for Prediction of Fatigue Damage & Self Healing 5.3.1 Propulsion High Temperature Materials 5.3.2 Lightweight Structures and Noise Integration The presentation will discuss rotorcraft specific technical challenges and needs as well as details of the work being conducted in the six task areas.

Halbig, Michael C.↗

NASA NTRS1976

Recent developments in rotary-wing aeroelasticity

The purpose of this review is to present the research done in rotary-wing aeroelasticity during the past eight years in a unified manner. The following topics are reviewed with considerable detail: (1) recent development in the aeroelastic modeling of the coupled flap-lag-torsional problem in hover (2) effect of unsteady aerodynamics on the coupled flap-lag-torsional aeroelastic problem in hover (3) the coupled flap-lag and the coupled flap-lag-torsional problem in forward flight (4) complete rotor and coupled rotor fuselage aeroelastic problems including both hingeless and teetering rotors.

Friedmann, P.↗

NASA NTRS1992

Rotary-wing aeroservoelastic problems

The state-of-the-art in the field of alleviating rotary-wing aeroservoelastic problems (by using active controls that modify the pitch of a helicopter rotor blade so as to alleviate dynamic effects) is assessed, and the more promising developments are identified. Special attention is given to the active control of aeromechanical and aeroelastic problems, such as the active control of ground resonance, active control of air resonance, and active control of blade aeroelastic instabilities; individual blade control; active control of vibration reduction using a conventional swashplate; and coupled rotor/fuselage vibration reduction using open-loop active control. Some results are presented for each of these topics, illustrating the efficiency of the techniques which have been developed.

Friedmann, Peretz P.↗

NASA NTRS2001

Rotary Wing Flight Test Methods Used for the Evaluation of Night Vision Devices

A number of rotary wing flight tests have been conducted by the Army Aeroflightdynamics Directorate in cooperation with NASA which involved the use of night vision devices and simulated devices. The test set up and data analysis have been taken from two perspectives. Some of the flight tests were structured to look at aircraft handling qualities when the pilot's image quality was reduced from normal daylight levels. In this case, aircraft flight path information was given to the pilot as one input into the Handling Qualities Ratings. Other flight tests were structured to look at pilot and workload directly. In this second case, aircraft position was accurately measured and used as pilot performance data. This paper provides an overview of the test methods used, lessons learned, and recommendations for future tam of night vision devices.

Haworth, Loran↗

NASA NTRS2006

AERODYNAMIC CHARACTERISTICS OF TWO ROTARY WING UAV DESIGNS

This paper presents the results of an experimental investigation of two rotary-wing UAV designs. The primary goal of the investigation was to provide a set of interactional aerodynamic data for an emerging class of rotorcraft. The present paper provides an overview of the test and an introduction to the test articles, and instrumentation. Sample data in the form of a parametric study of fixed system lift and drag coefficient response to changes in configuration and flight condition for both rotor off and on conditions are presented. The presence of the rotor is seen to greatly affect both the character and magnitude of the response. The affect of scaled stores on body drag is observed to be dependent on body shape.

Jones, Henry E.↗

NASA NTRS2006

Aerodynamic Characteristics of Two Rotary Wing UAV Designs

Jones, Henry E.↗

NASA NTRS1981

Application of unsteady airfoil theory to rotary wings

A clarification is presented on recent work concerning the application of unsteady airfoil theory to rotary wings. The application of this theory may be seen as consisting of four steps: (1) the selection of an appropriate unsteady airfoil theory; (2) the resolution of that velocity which is the resultant of aerodynamic and dynamic velocities at a point on the elastic axis into radial, tangential and perpendicular components, and the angular velocity of a blade section about the deformed axis; (3) the expression of lift and pitching moments in terms of the three components; and (4) the derivation of explicit expressions for the components in terms of flight velocity, induced flow, rotor rotational speed, blade motion variables, etc.

Kaza, K. R. V.↗

NASA NTRS2018

Figures of Merit Remembrances of Those Who Built an Army-NASA Collaboration and a New Age of Rotary-Wing Technology 1965-1985

The authors of this book are the Figures of Merit—the scientists, engineers, technicians, secretaries, test pilots, managers, visionaries, and leaders who built a unique interagency collaboration under the Army-NASA Joint Agreement at Ames Research Center and ushered in a new age of rotary-wing technology. The U.S. Army Aeronautical Research Laboratory (AARL) was formed in 1965 to strengthen the Army’s capabilities in aviation R&D, and the Army-NASA collaboration at Ames was intended to benefit both agencies by sharing personnel and facilities for research in areas of common interest in low-speed aviation.

Rotary-Wing Technology↗

NASA NTRS1979

Rotary-wing aerodynamics. Volume 1: Basic theories of rotor aerodynamics with application to helicopters

The concept of rotary-wing aircraft in general is defined. The energy effectiveness of helicopters is compared with that of other static thrust generators in hover, as well as with various air and ground vehicles in forward translation. The most important aspects of rotor-blade dynamics and rotor control are reviewed. The simple physicomathematical model of the rotor offered by the momentum theory is introduced and its usefulness and limitations are assessed. The combined blade-element and momentum theory approach, which provides greater accuracy in performance predictions, is described as well as the vortex theory which models a rotor blade by means of a vortex filament or vorticity surface. The application of the velocity and acceleration potential theory to the determination of flow fields around three dimensional, non-rotating bodies as well as to rotor aerodynamic problems is described. Airfoil sections suitable for rotors are also considered.

Stepniewski, W. Z.↗

NASA NTRS1982

Application of the Finite Element Method to Rotary Wing Aeroelasticity

A finite element method for the spatial discretization of the dynamic equations of equilibrium governing rotary-wing aeroelastic problems is presented. Formulation of the finite element equations is based on weighted Galerkin residuals. This Galerkin finite element method reduces algebraic manipulative labor significantly, when compared to the application of the global Galerkin method in similar problems. The coupled flap-lag aeroelastic stability boundaries of hingeless helicopter rotor blades in hover are calculated. The linearized dynamic equations are reduced to the standard eigenvalue problem from which the aeroelastic stability boundaries are obtained. The convergence properties of the Galerkin finite element method are studied numerically by refining the discretization process. Results indicate that four or five elements suffice to capture the dynamics of the blade with the same accuracy as the global Galerkin method.

Straub, F. K.↗

NASA NTRS1983

Formulation and solution of rotary-wing aeroelastic stability and response problems

The state of the art in the formulation and solution of rotary-wing aeroelastic stability and response problems is reviewed in detail. The approximations used in the structural, inertia and aerodynamic operators are discussed. The important role of geometric nonlinearities, due to moderate deflections, and aerodynamic stall in the aeroelastic stability and response problem are identified. It is also shown that geometric nonlinearities are of primary importance in aeroelastic stability calculations, and have a more limited, though important, role in response calculations. Next, formulation of coupled rotor/fuselage problems is described, for both air and ground resonance type problems. Both topics, the isolated blade problem and the coupled rotor/fuselage problem, are treated for both hover and forward flight. Solution of aeroelastic stability and response problems proceeds in two stages. First, the spatial dependence is eliminated by using Galerkin's method, or by using the finite element method. Next the nonlinear, or linear, ordinary differential equation with periodic coefficients have to be solved for stability or response. Efficient numerical methods for accomplishing these objectives are presented in a comprehensive manner. The paper contains a number of illustrative numerical results which are intended to clarify various aspects of the modeling process and serve as representative results for both aeroelastic stability and response calculations for a variety of blade and rotor configurations.

Friedmann, P. P.↗

NASA NTRS1990

Rotary-wing aeroelasticity with application to VTOL vehicles

This survey presents an assessment of the state of the art in rotary-wing aeroelasticity as applied to conventional helicopters as well as other VTOL vehicles such as tilting prop-rotors, the X-wing and a hybrid heavy lift vehicle. The objective is to enable the reader to develop an awareness of what has been accomplished, what remains to be done, and where to find more comprehensive treatments of the various topics discussed. The main topics discussed are: (1) structural modeling; (2) unsteady aerodynamic modeling; (3) formulation of the equations of motion and their solutions; (4) illustrative results for isolated blades in hover and forward flight; (5) illustrative results for coupled rotor/fuselage problems; (6) active control of aeromechanical and aeroelastic problems; (7) active controls for vibration reduction; (8) structural optimization with aeroelastic constraints; (9) gust response analysis of rotors; and (10) aeroelastic problems in special VTOL vehicles. These topics are reviewed with different levels of detail and some useful observation on potentially rewarding areas of future research are made.

Friedmann, Peretz P.↗

NASA NTRS1984

Numerical studies of the deposition of material released from fixed and rotary wing aircraft

The computer code AGDISP (AGricultural DISPersal) has been developed to predict the deposition of material released from fixed and rotary wing aircraft in a single-pass, computationally efficient manner. The formulation of the code is novel in that the mean particle trajectory and the variance about the mean resulting from turbulent fluid fluctuations are simultaneously predicted. The code presently includes the capability of assessing the influence of neutral atmospheric conditions, inviscid wake vortices, particle evaporation, plant canopy and terrain on the deposition pattern. In this report, the equations governing the motion of aerially released particles are developed, including a description of the evaporation model used. A series of case studies, using AGDISP, are included.

Bilanin, A. J.↗

NASA NTRS1987

Recent trends in rotary-wing aeroelasticity

The purpose of this paper is to survey the principal developments which have occurred in the field of rotary-wing aeroelasticity during the past five-year period. This period has been one of considerable activity and approximately one hundred papers have been published on this topic. To facilitate this review the field has been divided into a number of areas in which concentrated research activity has taken place. The main areas in which recent research is reviewed are: (1) structural modeling; (2) aerodynamic modeling; (3) aeroelastic problem formulation using automated or computerized methods; (4) aeroelastic analyses in forward flight; (5) coupled rotor/fuselage analyses; (6) active controls and their application to aeroelastic response and stability; (7) application of structural optimization to vibration response; and (8) aeroelastic analysis and testing of special configurations. These areas are reviewed with different levels of detail and some useful observations regarding potentially rewarding areas of future research are made.

Friedmann, Peretz P.↗

NASA NTRS1986

Recent trends in rotary-wing aeroelasticity

The purpose of this paper is to survey the principal developments which have occurred in the field of rotary-wing aeroelasticity during the past five year period. This period has been one of considerable activity and approximately one hundred papers have been published on this topic. To facilitate this review the field has been divided into a number of areas in which concentrated research activity has taken place. The main areas in which recent research is reviewed are: (1) structural modeling; (2) aerodynamic modeling; (3) aeroelastic problem formulation using automated or computerized methods; (4) aeroelastic analyses in forward flight; (5) coupled rotor/fuselage analyses; (6) active controls and their application to aeroelastic response and stability; (7) application of structural optimization to vibration reduction; and (8) aeroelastic analysis and testing of special configurations. These areas are reviewed with different levels of detail and some useful observations regarding potentially rewarding areas of future research are made.

Friedmann, Peretz P.↗