Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rotating detonation engine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Experimental Measurements of NOx Emissions in a Rotating Detonation Engine

An experimental study of NOx emissions in a rotating detonation engine is presented in this paper. Rotating detonation engines produce a pressure gain in the combustion process which leads to increased efficiency compared to conventional constant pressure, deflagration based combustion. However, in order for rotating detonation engines to become a viable alternative to conventional combustion, they must meet NOx emissions regulations. Emissions from rotating detonation engines are not currently well understood. A parametric study was performed to determine time averaged NOx emissions in a rotating detonation engine over a range of operating conditions. The effects of inlet pre-heat, equivalence ratio, flow rate, and fuel composition are investigated.

Ferguson, Donald↗

Performance Characterization of a Natural Gas-Air Rotating Detonation Engine at Elevated Pressure

Performance of a rotating detonation engine was studied to understand the challenges of achieving and quantifying a net pressure gain at engine-relevant conditions. The combustor under study was designed for operation with natural gas and air at elevated chamber pressures and air preheat temperatures representative of land based power generation gas turbine engines. The thrust produced by the combustor was measured to characterize its performance while high-frequency pressure transducers and high speed imaging of broadband combustion chemiluminescence provided information about the wave structure and dynamics. The rotating detonation engine was tested with two injector configurations to explore the effect of injector design and combustor operating mode on device performance. Analysis using multiple metrics showed nearly identical performance between similar operating conditions that alternately produced a single detonation wave or two counter-propagating waves in the combustion chamber. Across the range of tested conditions, a maximum pressure gain of -42% was measured. Several tests were observed to produce up to 10% more thrust than an ideal, constant pressure combustor, though this comparison ignores injection losses. Comparison of measured pressure gain with idealized simulations showed that the net pressure gain of a rotating detonation engine is closely tied to the area ratio between the inlet and outlet of the combustor.

20 FOSSIL-FUELED POWER PLANTS↗

Exploration of Measuring Pressure Gain Combustion within a Rotating Detonation Engine

Exploration of pressure gain within a Rotating Detonation Engine is investigated to determine maximum efficiency. Aerojet Rocketdyne’s Rotating Detonation Engine at Southwest Research Institute was used to find velocity measurements using Particle Image Velocimetry. Six unique cases, using three different exhaust nozzles and two different pressure ratios per nozzle were studied. The nozzles at the exhaust plume were implemented to act as back pressure that would closely resemble that of a gas turbine as well as take the rotational behavior of the flow and linearize it. As the velocimetry measurements are presented, it is noticeable that the flow becomes linearized with a smaller chokes and higher pressures.

Pressure gain combustion, rotating detonation, rot↗

Numerical Study on the Effect of Methane Doping in Hydrogen-Air Rotating Detonation Engines for Various Temperatures and Pressures

Rotating detonation engines (RDEs) have gained attention as a promising technology for future aviation engines. However, the numerical studies of these systems pose severe challenges due to the broad range of spatial and temporal scales. In this study, we use an adaptive mesh refinement based compressible, reactive solver PeleC to resolve the broad range of scales and accurately capture shock and detonation waves using high-resolution numerical schemes. Multi- species transport along with compressible Navier-Stokes equations are solved in the model along with a finite-rate based chemistry model. Embedded boundary method is used to model the complex geometry consisting of discrete fuel nozzles and the combustion chamber. The fuel consisting predominantly of hydrogen is doped with varying levels of methane while air is used as the oxidizer. For a specified total pressure and temperature, the number of stable detonation waves is found to decrease with increasing methane concentration in the fuel mixture. Additionally, no stable detonation solutions are observed for methane composition higher than 20% by volume for the range of operating conditions studied (300-900K, 10 Atm). The increased presence of high temperature zones is also indicative of higher thermal NOx emissions at low methane concentrations. The effect of fuel-air mixture composition and temperature on the detonability, detonation wave structure, mode transitions and their stability are analyzed in this study in addition to their implication on NOx emission.

automatic mesh refinement↗

Parametric Survey of a Natural Gas-Air Rotating Detonation Engine at Elevated Pressure

Detonation dynamics in a rotating detonation engine were studied to characterize the operability and performance of rotating detonation based pressure gain combustion systems at application-relevant conditions. The combustor was developed to operate with natural gas and air as the primary propellants at elevated chamber pressures and high air pre-heat temperatures representative of land based power generation systems. Measurements of chamber wave dynamics were performed using high-frequency pressure transducers and high speed imaging of broadband combustion luminescence. The rotating detonation engine was tested across a broad range of flow conditions to determine how operating parameters affect the propagation of detonation waves in the combustor. Enriching the air with additional oxygen was shown to broaden the range of conditions that allowed detonation fronts to stably propagate within the chamber, though all tested conditions exhibited counter-rotating waves. This range was shifted to lower oxygen content by increasing the oxidizer preheat temperature, which suggests a dependence on the chemical kinetics of the reactant mixture. Some conditions exhibited modulations in pressure fluctuation amplitude and frequency measured by chamber pressure probes. Analysis of high speed images identified the source of the modulation as the intersection point of the counter-propagating detonation waves rotating to align with different pressure measurement ports throughout the test duration.

20 FOSSIL-FUELED POWER PLANTS↗

Performance Characterization of a Natural Gas–Air Rotating Detonation Engine

An experimental study of a rotating detonation engine (RDE) operating with natural gas and air at elevated chamber pressures and air preheat temperatures was conducted to quantify its performance at conditions representative of land-based power generation gas turbine engines. Here, the thrust produced by the combustor was measured to characterize its work output potential. High-frequency pressure transducers and broadband chemiluminescence measurements of the flame provided information about the wave structure and dynamics. Analysis of common performance metrics demonstrated the necessity of normalizing any RDE performance parameter by the driving system potential, typically the reactant manifold pressure. Application of a thermodynamic performance model to a generic RDE identified the area ratio between the RDE exhaust and injection throats as the primary parameter affecting delivered pressure gain. The model was further applied to draw comparison with experimental measurements of net pressure gain for identical flow conditions. Only one of the two tested injector configurations followed the predicted trends, suggesting that performance of the second was governed by physical processes other than the reactant thermodynamics. Although an absolute pressure gain was not demonstrated, it is promising that the natural gas–air RDE delivered up to 90% of the theoretical performance.

20 FOSSIL-FUELED POWER PLANTS↗

Study of the Effects of Various Injection Geometries on the Operation of a Rotating Detonation Engine

Test data for operation of a rotating detonation engine using Hydrogen-air mixtures at air mass fluxes of 40-115 kg/m2s and a range of global equivalence ratios using three different injection schemes are presented and discussed. Stable rotation of at least one detonation wave traveling at speeds of 1380-1650 m/s is achieved for each injector under certain conditions. A variety of stable, unstable, and transitory combustion processes are seen, and data collected from high-speed pressure transducers is used to characterize this behavior. Further insight into what drives the operating mode for each injector is provided with the aid of static pressure measurements and a simple model to estimate injector jet Mach numbers and momentum fluxes. Comparisons are made between the injectors using average pressure measurements taken along the detonation channel. When these data are normalized by the feed system stagnation pressure self similar profiles are seen and clear trends in pressure losses among the injectors emerge.

Duvall, James↗

Carbon and Hydrocarbon Particle Seeding in Air-Breathing Rotating Detonation Engine

Within the power generation community, the rotating detonation engine (RDE) is only growing in popularity with its increased performance, simple mechanism, and operation. Although significant testing is underway to characterize the RDE for integration with conventional gas turbines, this entire system is still at a relatively low technology readiness level. In the midst of RDE research, there is an initiative to understand solid particle seeding effects in the detonation performance. Under investigation at the University of Central Florida is a Department of Energy (DOE) 15.24 cm (6 in.) RDE, with a solid particle seeder in parallel with its H2 and air flow lines. Previous work on this system involved carbon particle detonation; however, the tested particles were taken one step further to include more sustainable, greener hydrocarbon particles. Testing of powdered sugar, peanut flour, and cornstarch, along with previous carbon black tests have shown not only successful detonability, but a noticeable effect on the detonation wave dynamics. Side-by-side with a particle burning model being developed, an operational map can be determined for the hydrocarbon particles particularly, which can be tuned with the local flow conditions to achieve peak operability while replacing fuels with sustainable alternatives that could even be grown.

Engineering↗

Mixing and detonation structure in a rotating detonation engine with an axial air inlet

High-fidelity simulations of an experimental rotating detonation engine with an axial air inlet were conducted. The system operated with hydrogen as fuel at globally stoichiometric conditions. Instantaneous data showed that the detonation front is highly corrugated, and is considerably weaker than an ideal Chapman–Jouguet wave. Regions of deflagration are present ahead of the wave, caused by mixing with product gases from the previous cycle, as well as the injector recovery process. It is found that as the post-detonation high pressure flow expands, the injectors recover unsteadily, leading to a transient mixing process ahead of the next cycle. The resulting flow structure not only promotes mixing between product and reactant gases, but also increases likelihood of autoignition. These results show that the detonation process is very sensitive to injector design and the transient behavior during the detonation cycle. Phase-averaged statistics and conditionally averaged data are used to understand the overall reaction structure. As a result, comparisons with available experimental data on this configuration show remarkable good agreement of the predicted reacting flow structure.

42 ENGINEERING↗

Carbon-Based Multi-Phase Rotating Detonation Engine

Abstract This article focuses on extending an H2/air rotating detonation engine's detonability limits by introducing solid carbon particles into the combustor. Carbon black particles consisting of 1% volatility and a carbon concentration of 99% were used as a solid-phase mixing agent for enhanced reaction wave dynamics. Carbon black was found to sustain detonations over multiple operational regimes formerly unattainable without carbon particles. The experiments confirm that detonations were attainable over a wide range of operational parameters, including the total mass flux flowing through the annulus (≅120–270 kg/s m2), the hydrogen/air equivalence ratios (0.65–1.0), and carbon additions (0–20 g). Chemiluminescence imaging was used to visualize the detonation wave within the annulus, quantify detonation wave velocities, and define a detonability map. The detonability map demonstrates the advantage of carbon addition, shows that detonation-based combustion can be sustained at leaner equivalence ratios, reduces hydrogen consumption dependency. The detonation wave velocities decreased as the H2/air equivalence ratio was reduced, where, in general, the detonation wave velocities decreased with respect to the Chapman–Jouguet velocity, suggesting a decrease in the detonation waves efficiency with reduced H2 concentrations. However, an extraordinary phenomenon was witnessed at very lean H2/air equivalence ratios and low mass flux conditions, where the detonation wave velocity increased upward of 100 m/s. This variation is a direct effect of the carbon particles, which drive the detonation wave. Thus, the results demonstrate that carbon particles’ addition provides an economically feasible solution to sustain high-efficiency energy production.

Energy & Fuels↗

Markov Chain Monte Carlo Parameter Estimation of Deflagration Losses in a Rotating Detonation Engine

One of the practical challenges of the studies of rotating detonation engines (RDEs) is the direct estimation of losses from experimental measurements. This study attempts at resolving this limitation by combining a reduced order model (ROM) of the detonation wave characteristics with a Markov chain Monte Carlo parameter estimation framework. The model considers simple deflagration losses and the overall impact of deflagration on RDE performance. To evaluate this model, a Markov Chain Monte Carlo (MCMC) sampling technique was applied to estimate the loss parameters within the model for a set of conditions operated in hydrogen-air over a range of mass flow rates and equivalence ratios. The MCMC parameter estimation framework allowed for the determination of a posterior distribution of the loss parameters for each test condition, an examination of the correlation between the loss parameters and measured performance metrics of the RDE, and an uncertainty propagation of these parameters. The predicted model loss parameters were then compared to indirect experimental measurements of the deflagration combustion fractions to evaluating the validity of the approach, and shed light on the benefits and drawbacks of the model, measurement techniques, and the estimation framework.

33 ADVANCED PROPULSION SYSTEMS↗

Wave Detection and Tracking Within a Rotating Detonation Engine Through Object Detection

As the operational time window of experimental rotating detonation engines (RDEs) is expanded and the technology matures toward integration within gas turbines, monitoring techniques must evolve to offer computationally efficient and highly time-resolved diagnostics. In this study, computer vision object detection methodology that seeks to reduce data processing time and calculate wave velocity within drastically reduced time intervals as compared to traditional high-frame-rate RDE images analysis techniques is proposed. The adapted you-only-look-once object detection network is trained to detect individual detonation waves within single down-axis RDE images. The wave location and rotational direction detected within a frame are tracked through a series of high-speed images to calculate the frame-to-frame wave velocity with the time-step resolution of $\mathrm{20 μs}$ across a series of frames. The analysis of the annotation box size and image linearization effects is presented, demonstrating the lowest frame-to-frame velocity total uncertainty of $\mathrm{±3.8\%}$ and the highest classification speed of 9.5 frames per second using linearized images. Linearized images “unwrap” the RDE annulus pixel region to a reduced image size. Here, this new method offers great reductions in data processing times and unsteady detonation behavior insight at intervals more comparable to the timescales of detonation wave interactions via the application of machine learning to experimental RDE data.

33 ADVANCED PROPULSION SYSTEMS↗

Characterization of Rotating Detonation Engine Injector Response Using Laser-Induced Fluorescence

In this work, rotating detonation engine (RDE) fuel injector response was characterized in a lab-scale linear testing platform. The experimental design consists of a linear extrusion of an RDE cross section and allows rapid interchanging of modular, 3D printed inlet geometries. An array of helium jets was established within a channel, and a single combustion-driven shock pulse was presented at one end. The subsequent injector interruption and recovery were quantified using high-speed acetone planar-laser-induced fluorescence (PLIF). A quartz wall provided optical access to the channel and the injector response was visualized at up to 30 kHz. Three dynamic pressure transducers allowed the shock strength to be quantified along the length of the channel. Timescales associated with jet interruption and recovery were determined by analysis of instantaneous PLIF images and considered in conjunction with the dynamic pressure measurements. Finally, results are presented as a function of pertinent nondimensional parameters and compared with available experimental and computational data in a full, research-scale RDE.

42 ENGINEERING↗

Equivalence Ratio Scans in a Rotating Detonation Engine

Published data for run times exceeding a few seconds in rotating detonation engines (RDEs) is rare, but long duration tests are necessary to understand both transient and persistent phenomena in RDE operation. Previous work has noted different detonation wave modes at different equivalence ratios. In the current study, multiple long-duration runs with constant air flow rate and variable equivalence ratio are conducted in a hydrogen-fueled, water-cooled RDE. Analysis of the capillary tube averaged pressure (CTAP) data reveals a strong correlation with equivalence ratio as well as a small time dependency due to transient thermal processes. Ion probe measurements are used to analyze detonation wave frequencies and modes, both of which are strongly dependent on the equivalence ratio. Mode transitions are observed to occur consistently as the equivalence ratio is traversed between 0.55 and 0.60. These transitions are also found to be a function of the direction of changing equivalence ratio (ascending or descending) and time.

Boyette, Wesley R.↗

Equivalence Ratio Scans in a Rotating Detonation Engine

Published data for run times exceeding a few seconds in rotating detonation engines (RDEs) is rare, but long duration tests are necessary to understand both transient and persistent phenomena in RDE operation. Previous work has noted different detonation wave modes at different equivalence ratios. In the current study, multiple long-duration runs with constant air flow rate and variable equivalence ratio are conducted in a hydrogen-fueled, water-cooled RDE. Analysis of the capillary tube averaged pressure (CTAP) data reveals a strong correlation with equivalence ratio as well as a small time dependency due to transient thermal processes. Ion probe measurements are used to analyze detonation wave frequencies and modes, both of which are strongly dependent on the equivalence ratio. Mode transitions are observed to occur consistently as the equivalence ratio is traversed between 0.55 and 0.60. These transitions are also found to be a function of the direction of changing equivalence ratio (ascending or descending) and time.

Boyette, Wesley R.↗

Concept of Dynamic Heat Insulation for Rotating Detonation Engines

This work introduces a new class of materials concept to dynamically reduce instantaneous heat fluxes in Rotating Detonation Engine (RDE) combustor chamber walls. The high-frequency and high-amplitude surface heat fluxes observed in RDEs arise from large instantaneous temperature differences between the detonation shockwave and chamber wall surface. These temperature gradients drive substantial energy loss and reduce the chamber gas pressure, ultimately limiting the cycle’s thermodynamic efficiency. This work introduces a concept for dynamically insulating the combustion chamber surfaces using surface layers or coatings with low thermal time scale. With such coatings, the surface temperature may follow the fluctuations of the cyclic detonation wave temperature, thus reducing the instantaneous heat flux therefore cycle-mean heat flux. To analyze these cyclic thermal phenomena, a one-dimensional analytical conduction solver was utilized with the capability to handle multilayered structures. Parametric modeling was performed using transient heat flux boundary conditions representative of a hydrogen–air RDE across a broad range of coating thermal properties and engine conditions. The coating effectiveness scaled with the product of thermal time constant and detonation wave frequency and the results were non-dimensionalized to guide future materials development. This strategy may offer benefits in increasing material survivability, reducing cooling requirements, and enhancing pressure gain.

heat transfer↗