Search NASA⌕ Search

SEARCH · Search NASA

Results for “Runge-Kutta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Thermal engineering research

A theoretical investigation of gas flow inside a multilayer insulation system has been made for the case of the broadside pumping process. A set of simultaneous first-order differential equations for the temperature and pressure of the gas mixture was obtained by considering the diffusion mechanism of the gas molecules through the perforations on the insulation layers. A modified Runge-Kutta method was used for numerical experiment. The numerical stability problem was investigated. It has been shown that when the relaxation time is small compared with the time period over which the gas properties change appreciably, the set of differential equations can be replaced by a set of algebraic equations for solution. Numerical examples were given, and comparisons with experimental data were made.

Shih, C. C.↗
NASA NTRS1977

On the improvement of deconvolution with digitized data using a Runge-Kutta integration scheme

A relatively simple change in the treatment of the input function in numerical integration of high-order differential equations by Runge-Kutta methods provides substantial improvements in accuracy, particularly when the forcing function is in digitized form. The Runge-Kutta-Gill coefficients are modified to incorporate the changes; with pulse-type excitations, improvements on the order of 2 to 50 times greater accuracy are demonstrated.

Houghton, J. R.↗
NASA NTRS1977

An optimal Space Shuttle ascent trajectory for the first orbital flight test

An optimal solution of the ascent trajectory of the Space Shuttle for the first orbital flight test is presented; the optimization is a minimum propellant, four-control problem in yaw angle, roll angle, pitch angle and vacuum thrust of each Space Shuttle main engine. Piecewise linear segments with juncture points treated as parameters are employed to model the controls. Equations of motion for a three-dimensional flight with pitch plane moment balance about an oblate are integrated numerically with a fourth-order Runge-Kutta method; two- and one-dimensional cubic spline function curve fits of aerodynamic coefficients are used during the first and second stages, respectively. The constraint minimization problem is solved with the Davidon-Fletcher-Powell function method.

Johnson, I. L., Jr.↗
NASA NTRS1977

Effect of flow on quasi-one-dimensional acoustic wave propagation in a variable area duct of finite length

The general equation for the velocity potential of quasi-one-dimensional acoustic wave motion in a variable area, finite duct with one-dimensional flow is derived by using a perturbation technique. The nonlinear second-order partial differential equation is linearized and then solved, by either a power series expansion method or the Runge-Kutta fourth-order method, for harmonic time dependence. The boundary condition taken at the duct mouth is that of matching the impedance of the duct sound field to that of the radiation field at the duct opening. Three axial Mach number variations along the duct axis are considered and the results obtained are compared with those for the case of constant Mach number, to determine the influence of the axial velocity gradient on sound propagation. The effect of flow on the radiation impedance is also considered.

Lumsdaine, E.↗
NASA NTRS1973

Undergraduate research report

Studies are reported of the probability distribution of yield strength for mild steel, and the application of numerical techniques to solve mechanical vibration problems. Tensile experiments were conducted for 50 cold rolled and 38 hot rolled mild steel rods. Chi-square, Kolmogro-Smirnov and goodness-of-fit methods are used to test the normality or lognormality of the experimental results. As an example of the application of numerical techniques, a nonlinear dash-pot-speing system subjected to seismic excitation is analyzed by using the fourth-order Runge-Kutta integrated method.

Yeh, H. Y.↗
NASA NTRS1972

Dynamic response analysis of geometrically non-linear structures subjected to high impact.

Description of an efficient digital computer method for the determination of the propagation of elastic stresses and deformations in certain geometrically nonlinear structures subjected to high impact loading. The finite-element matrix displacement approach utilizing curved quadrilateral shell elements in conjunction with a nodewise predictor-corrector method employing Runge-Kutta extrapolation techniques has been adopted for the present solution. The related computer program written in FORTRAN V for the UNIVAC 1108 computer has proved to be effective for the solution of a range of practical problems including rectangular and cylindrical panels. Numerical results are presented for a relevant structure, the cell container, and the negative electrode of an impact-resistant battery subjected to high impact, simulating its free landing on a planetary surface.

Gupta, K. K.↗
NASA NTRS1973

Laminar film condensation on the inside of slender, rotating truncated cones.

A solution for film condensation on the inside of slender rotating truncated cones is established in the region where the half cone angle phi is close to zero and where the equation of Dhir and Lienhard (1971) is no longer valid. All the familiar assumptions used in Nusselt's theory of laminar film condensation are assumed valid, including negligible sub-cooling and momentum changes in the condensate film, no interfacial shear between the condensate and the vapor, and pure conduction within the condensate film. A Runge-Kutta numerical integration method using a digital computer was used. Results for a specific geometry are given for water condensing at 212 F on a condenser wall maintained at 70 F.

Marto, P. J.↗
NASA NTRS1977

Stability of numerical integration techniques for transient rotor dynamics

A finite element model of a rotor bearing system was analyzed to determine the stability limits of the forward, backward, and centered Euler; Runge-Kutta; Milne; and Adams numerical integration techniques. The analysis concludes that the highest frequency mode determines the maximum time step for a stable solution. Thus, the number of mass elements should be minimized. Increasing the damping can sometimes cause numerical instability. For a uniform shaft, with 10 mass elements, operating at approximately the first critical speed, the maximum time step for the Runge-Kutta, Milne, and Adams methods is that which corresponds to approximately 1 degree of shaft movement. This is independent of rotor dimensions.

Kascak, A. F.↗
NASA NTRS1972

On the stability of numerical integration routines.

Numerical integration methods for the solution of initial value problems for ordinary vector differential equations may be modelled as discrete time feedback systems. The stability criteria discovered in modern control theory are applied to these systems and criteria involving the routine, the step size and the differential equation are derived. Linear multistep, Runge-Kutta, and predictor-corrector methods are all investigated.

Glover, K.↗
NASA NTRS1973

On the stability of numerical integration routines for ordinary differential equations.

Numerical integration methods for the solution of initial value problems for ordinary vector differential equations may be modelled as discrete time feedback systems. The stability criteria discovered in modern control theory are applied to these systems and criteria involving the routine, the step size and the differential equation are derived. Linear multistep, Runge-Kutta, and predictor-corrector methods are all investigated.

Glover, K.↗
NASA NTRS1973

A study of numerical methods of solution of the equations of motion of a controlled satellite under the influence of gravity gradient torque

Numerical methods of integration of the equations of motion of a controlled satellite under the influence of gravity-gradient torque are considered. The results of computer experimentation using a number of Runge-Kutta, multi-step, and extrapolation methods for the numerical integration of this differential system are presented, and particularly efficient methods are noted. A large bibliography of numerical methods for initial value problems for ordinary differential equations is presented, and a compilation of Runge-Kutta and multistep formulas is given. Less common numerical integration techniques from the literature are noted for further consideration.

Thompson, J. F.↗
NASA NTRS1977

An ILLIAC program for the numerical simulation of homogeneous incompressible turbulence

An algorithm and ILLIAC computer program, developed for the simulation of homogeneous incompressible turbulence in the presence of an applied mean strain, are described. The turbulence field is represented spatially by a truncated triple Fourier series (spectral method) and followed in time using a fourth-order Runge-Kutta algorithm. These include: (1) transformation of variables suggested by Taylor's sudden-distortion theory; (2) implicit viscous diffusion by use of an integrating factor; (3) implicit pressure calculation suggested by Taylor's sudden-distortion theory, and (4) inexpensive control of aliasing by random and phased coordinate shifts.

Rogallo, R. S.↗