SEARCH · Search NASA
Results for “SANDSTONES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microfracture spacing distributions and the evolution of fracture patterns in sandstones
Not Available
Comparison of Darcy's law and invasion percolation simulations with buoyancy-driven CO2-brine multiphase flow in a heterogeneous sandstone core
Not Available
INTERDUNE DEPOSITS AND STRATIGRAPHIC FRAMEWORK OF THE NAVAJO SANDSTONE IN THE LAKE POWELL AREA, UTAH, USA
The Western Interior of the USA was dominated by desert environments for much of the Jurassic. Of these desert environments, the most extensive by far was the Navajo Sandstone erg, which, in conjunction with its correlative Nugget and Aztec Sandstones, is thought to have covered well over 500,000 km2, and is one of the largest ergs preserved in the rock record. The Navajo Sandstone is also one of a few geologic units which show promise as a potential CO2 sequestration reservoir in Utah. It outcrops along the eastern and southern margin of the state, and subcrops throughout most of the central area. The Navajo Sandstone consists of stacked eolian deposits, composed of well sorted, clean sandstone, deposited in commonly tabular, high angle cross bedded paleodunes, which are on average 15 m thick. Interspersed between these paleodunes are interdune deposits. Interdune deposits consist of sandy to calcareous, predominantly planar bedded, lensoid units, ranging from <1 m up to 7 m thick. In some cases, these interdune deposits occur along more extensive stratigraphic bounding surfaces. Dating within the Navajo Sandstone has historically been very difficult, as a result of its predominantly clean, aeolian sandstone composition. In addition, complexity of internal stratigraphic surfaces coupled with a low structural dip and generally flat topography has resulted in a poor understanding of the internal stratigraphy of the Navajo Sandstone. Exceptional three-dimensional exposures of the Navajo Sandstone in the upper portions of Lake Powell permit us to relate interdune carbonates to a hierarchical bounding surfaces model. Here we use this combined approach to interpret the internal stratigraphy of the Navajo Sandstone in this region. This work forms part of a larger study of the Navajo Sandstone across Utah and its potential as a CO2 reservoir, by developing a more comprehensive stratigraphic framework, and increasing understanding of stratigraphic complexity within one of the most significant eolian systems in the world.
Seismic response to paleo-sand dunes in the Nugget Sandstone Formation, southwestern Wyoming
We have analyzed a 3D seismic survey acquired for a carbon sequestration project on top of the Moxa Arch in southwestern Wyoming. We observed a zone of discontinuous reflectors on vertical slices of seismic amplitude volume, whereas, the northwest–southeast lineations were observed on the time slices. We performed a seismic to well tie that suggested that the lineations occur within the Nugget Sandstone. The Nugget Sandstone is an eolian sandstone deposit of Early Jurassic age, deposited as a subtropical dune field, and equivalent to the Navajo Sandstone of southwestern Utah. Petrophysical analysis indicates that the Nugget Sandstone is dominated by clean sandstone (70%–80%), whereas evaporites, including halite and anhydrite, are present in certain zones. Previous outcrop studies on the Navajo Sandstone indicate the wind direction to be predominantly northeast–southwest. Seismic attributes, including coherence and curvature, displayed on stratal slices within the Nugget Sandstone interval indicate the presence of lineations in the northwest–southeast direction with irregular spacing. These lineations are approximately perpendicular to the inferred dominant wind direction. We computed the dominant wind direction from the average azimuth of the lineations as seen on the curvature attribute in the Nugget Sandstone interval. Geological feature: Eolian sand dunes with interdunal evaporites Seismic appearance: Parallel lineations with irregular spacing on seismic attribute horizon slices Alternative interpretations: Canyons at continental slopes; slope failures Features with a similar appearance: Marine bars; contourites Formation: The Nugget Sandstone — equivalent to the Navajo Sandstone Age: Early Jurassic Location: Moxa Arch, Wyoming Seismic data: Obtained by the University of Wyoming with U.S. DOE funding Contributors: Dhruv Agrawal, Brady Lujan, Sumit Verma, Shuvajit Bhattacharya, and Subhashis Mallick Analysis tools: Coherence and curvature attributes; seismic inversion; petrophysical inversion
Chemo‐mechanical Alterations Induced From CO 2 Injection in Carbonate‐Cemented Sandstone: An Experimental Study at 71 °C and 29 MPa
Abstract Carbon capture, utilization, and storage may lead to mechanical degradation of the subsurface reservoir from fluid‐rock interaction, which could lead to wellbore instability or reservoir compaction. To better understand potential relationship between mechanical degradation with various carbonate cement textures and compositions in sandstone reservoirs, six flow‐through experiments were conducted. Formation water (TDS = 5,390 mg/L) enriched with CO 2 flowed through two types of Pennsylvanian Morrow B Sandstone: an ankerite‐siderite‐cemented sandstone (disseminated cement texture) and a calcite‐cemented sandstone (poikilotopic cement texture). The experiments produced little change in permeability in the ankerite‐siderite‐cemented sandstone, but permeability increased up to more than 1 order of magnitude in the calcite‐cemented sandstone. Ultrasonic measurements and cylinder‐splitting tests (also known as Brazilian tests) suggested negligible mechanical degradation of the ankerite‐siderite‐cemented sandstone. Variable changes, with significant mechanical degradation in the static moduli, were observed in the calcite‐cemented sandstone. Thus, dissolution of the disseminated ankerite‐siderite cement (0.28–0.30%) had minimal impact on modifying the flow network and the mechanical integrity of the sandstone, whereas dissolution of the poikilotopic calcite cement (0.89–1.13%, quantified with fluid chemistry and visualized with X‐ray microcomputed tomography) impacted the mechanical strength of the sandstone by disconnecting framework grains. With the high water‐to‐rock mass ratios (7.3–8.2) and number of pore volumes (147–675) employed in these experiments, potential risks are most relevant to regions near injection wells. Ultimately, the chemo‐mechanical effects induced by CO 2 injection are strongly influenced by the cement texture and composition and the burial history of the reservoir rock.
Reservoir Characterization of Bridgeport and Cypress Sandstones in Lawrence Field Illinois to Improve Petroleum Recovery by Alkaline-Surfactant-Polymer Flood
Within the Illinois Basin, most of the oilfields are mature and have been extensively waterflooded with water cuts that range up to 99% in many of the larger fields. In order to maximize production of significant remaining mobile oil from these fields, new recovery techniques need to be researched and applied. The purpose of this project was to conduct reservoir characterization studies supporting Alkaline-Surfactant-Polymer Floods in two distinct sandstone reservoirs in Lawrence Field, Lawrence County, Illinois. A project using alkaline-surfactantpolymer (ASP) has been established in the century old Lawrence Field in southeastern Illinois where original oil in place (OOIP) is estimated at over a billion barrels and 400 million barrels have been recovered leaving more than 600 million barrels as an EOR target. Radial core flood analysis using core from the field demonstrated recoveries greater than 20% of OOIP. While the lab results are likely optimistic to actual field performance, the ASP tests indicate that substantial reserves could be recovered even if the field results are 5 to 10% of OOIP. Reservoir characterization is a key factor in the success of any EOR application. Reservoirs within the Illinois Basin are frequently characterized as being highly compartmentalized resulting in multiple flow unit configurations. The research conducted on Lawrence Field focused on characteristics that define reservoir compartmentalization in order to delineate preferred target areas so that the chemical flood can be designed and implemented for the greatest recovery potential. Along with traditional facies mapping, core analyses and petrographic analyses, conceptual geological models were constructed and used to develop 3D geocellular models, a valuable tool for visualizing reservoir architecture and also a prerequisite for reservoir simulation modeling. Cores were described and potential permeability barriers were correlated using geophysical logs. Petrographic analyses were used to better understand porosity and permeability trends in the region and to characterize barriers and define flow units. Diagenetic alterations that impact porosity and permeability include development of quartz overgrowths, sutured quartz grains, dissolution of feldspar grains, formation of clay mineral coatings on grains, and calcite cementation. Many of these alterations are controlled by facies. Mapping efforts identified distinct flow units in the northern part of the field showing that the Pennsylvanian Bridgeport consists of a series of thick incised channel fill sequences. The sandstones are about 75-150 feet thick and typically consist of medium grained and poorly sorted fluvial to distributary channel fill deposits at the base. The sandstones become indistinctly bedded distributary channel deposits in the main part of the reservoir before fining upwards and becoming more tidally influenced near their top. These channel deposits have core permeabilities ranging from 20 md to well over 1000 md. The tidally influenced deposits are more compartmentalized compared to the thicker and more continuous basal fluvial deposits. Fine grained sandstones that are laterally equivalent to the thicker channel type deposits have permeabilities rarely reaching above 250 md. Most of the unrecovered oil in Lawrence Field is contained in Pennsylvanian Age Bridgeport sandstones and Mississippian Age Cypress sandstones. These reservoirs are highly complex and compartmentalized. Detailed reservoir characterization including the development of 3-D geologic and geocellular models of target areas in the field were completed to identify areas with the best potential to recover remaining reserves including unswept and by-passed oil. This project consisted of tasks designed to compile, interpret, and analyze the data required to conduct reservoir characterization for the Bridgeport and Cypress sandstones in pilot areas in anticipation of expanded implementation of ASP flooding in Lawrence Field. Geologic and geocellular modeling needed for reservoir characterization and reservoir simulation were completed as prerequisites for design of efficient ASP flood patterns. Characterizing the complex reservoir geology that identifies the geologic conditions that will optimize oil recoveries for expansion of the ASP pilots in the Bridgeport and Cypress sandstones to other areas of Lawrence Field is the primary objective of this project. It will permit evaluation of efficiency of oil recovery from Bridgeport and Cypress sandstone reservoirs using ASP technology. Additionally evaluation of similar Pennsylvanian and Chesterian reservoirs shows that it is likely that ASP flood technology can be successfully applied to similar reservoirs in the Illinois Basin as well as to other U.S. reservoirs. Chemical flooding was introduced in stages with the first flood initiated in 2010 and a second offset pilot project initiated during 2011. Rex Energy Corporation is reporting a positive response on its ASP Middagh pilot project in the Pennsylvanian Bridgeport B reservoir, Lawrence Field. Oil response in the 15 acre flood has continued to show an increase in oil cut from 1% to 12%. Total pattern production increased from 16 BOPD and stabilized at a range of 65-75 BOPD in the last three months of 2011. Peak production rose to 100 + BOPD. Oil cut in the pilot increased for 1.0% to ~ 12.0% with an individual well showing oil cuts greater than 20%. A second, 58 acre pilot (Perkins-Smith) adjacent to and likely in communication with the Middagh pilot has been initiated. Preliminary brine injection has been implemented and ASP injection was initiated in mid-2012. Response is expected by mid-2013 with peak recovery expected by late 2013. Rex Energy is projecting full scale expansion with the next step of development being a 351 acre project scheduled to begin in mid-2013. Preliminary development has been initiated in this Delta Unit area located in the south half of section 32, T4N, R12W.
The Cypress Sandstone Seal System
The Cypress Sandstone is the youngest and shallowest unit in the Illinois Basin that was featured in the United States Carbon Utilization and Storage Atlas IV as a target for saline carbon storage with an estimated 0.2 to 2.3 GT of storage potential. Additional research on a residual oil zone (ROZ) developed within the Cypress Sandstone has delineated 27 prospects with approximately 290.8 million m3 (1.8 billion barrels) of oil in place. 21 to 31 million m 3 (144 to 196 million barrels) of oil is estimated to be recoverable using carbon dioxide enhanced oil recovery (CO 2 -EOR). Storage of CO 2 associated with EOR in these ROZ prospects alone, not accounting for associated main pay zones (MPZs), underlying brine formation, or intervals adjacent to or between prospects, is estimated to be up to 10.4 billion tonnes. The Cypress Sandstone is thus well understood to be a CO 2 injection target, both for EOR and associated storage. However, the seal system overlying the Cypress Sandstone is poorly understood. Unlike deeper formations such as the Mt. Simon Sandstone or the St. Peter Sandstone which are either in use as a CO 2 sink or being characterized for prospective storage, respectively, the Cypress is not overlain by hundreds of feet of impermeable shale. Rather, the Cypress is overlain by a lithologically variable interval that is composed generally of shales and limestones with some sandstone in the part of the Basin where the Cypress is deep enough to facilitate CO 2 storage. Also, due to its status as one of the shallowest and most prolific oil reservoirs in the Basin, the seal system overlying the Cypress Sandstone has a relatively high number of legacy well penetrations. The purpose of this report is to characterize the Cypress Sandstone seal system using well logs and available core. Gross thickness, lithology (facies), and mineralogy of seals is described and mapped across the Basin. The column height of CO 2 that can be held is calculated using capillary pressure data from a representative core.
AEOLIAN INTERDUNE FACIES OF THE NAVAJO SANDSTONE, UTAH
During the Early Jurassic an extensive desert environment covered a large area of the Western Interior of the USA. The Navajo Sandstone erg is thought to be one of the largest dunefields preserved in the rock record, estimated to have covered well over 500,000 km2, though the preserved extent is less due to erosion. The Navajo Sandstone outcrops extensively in eastern and southern Utah, forming spectacular domes and arches, including those in Arches National Park. Navajo Sandstone aeolian dunes consist of stacked, tabular sandstone bodies, displaying steeply dipping crossbedding, and are on average 15 m thick, with high porosity and permeability. In addition to these extensive paleodunes, interdune deposits are also documented, consisting of lensoid sandstone or pale grey limestone, of approximately 1-7 m thick. This research forms part of a broader investigation into the Navajo Sandstone in Utah, focusing on its potential as a CO2 reservoir. The internal stratigraphy of the Navajo Sandstone can be complex, with multiple types of aeolian surfaces present including discontinuous inter-dune contacts, and inclined bedding planes associated with large climbing dunes. Interdune deposits may be associated with more laterally extensive stratigraphic surfaces, highlighting their importance in the internal stratigraphic framework of the Navajo Sandstone erg. Here we interpret facies and depositional processes of aeolian interdune deposits of the Navajo Sandstone throughout Utah, using well log, outcrop, and thin sections. Interdune deposits range in type from short lived, small ponds of predominantly reworked aeolian sediment, to comparatively long-lived oases consisting of lakes with extensive ecosystems. This project aims to increase our understanding of an important potential CO2 reservoir, and enhance understanding of stratigraphic complexity within one of the world's most significant aeolian systems.
Iron-sandstone synergy: Advancing in-situ hydrogen production from natural gas via electromagnetic heating
Here, to address the escalating demands for decarbonization in the petroleum industry, a carbon-zero technology, known as in-situ hydrogen (H 2 ) production via electromagnetic (EM)-assisted catalytic heating, has recently been proposed for generating and extracting clean H 2 directly from petroleum reservoirs. Although preliminary techno-economic analyses show significant potential of this emerging technology for clean and affordable hydrogen, the fundamentals of natural gas conversion to H 2 in the presence of reservoir rocks are poorly understood. In this study, we explore the synergy between sandstone and artificial iron-based catalysts in enhancing in-situ H 2 production from methane (CH 4 ) cracking under EM irradiation. The dynamic behaviors of sandstone under EM heating are comprehensively investigated, including its thermal behaviors, thermal runaway (TR) phenomenon, gas generation during TR, and energy consumption. We found that sandstone demonstrates an evident natural catalytic effect for promoting CH 4 conversion to H 2 , enabling H 2 production starting at about 394 °C. The natural catalytic role of iron minerals in sandstone is elucidated using various advanced characterization techniques. Remarkably, when adding iron catalysts into the sandstone, the highest H 2 concentration and CH 4 conversion reaches 91 mol.% and 80%, respectively, at a temperature of 666 °C, while they are 50 mol.% and 35%, respectively, for the sample consisting of iron catalysts and quartz at the same level of temperature. This result indicates a strong iron-sandstone synergy and a potential to stimulate H 2 production by leveraging this synergy. Throughout the experimental process, the generation of carbon oxides (CO and CO 2 ) is negligible. These findings pave a pathway towards future pilot for carbon-zero in-situ H 2 production from sandstone gas reservoirs.
A Nonconventional CO 2 -EOR Target in the Illinois Basin: Oil Reservoirs of the Thick Cypress Sandstone
The Illinois State Geological Survey (ISGS) identified and quantified nonconventional carbon dioxide (CO 2 ) enhanced oil recovery (EOR) target opportunities within the thick Cypress Sandstone in the Illinois Basin. Up to 60 m thick Cypress Sandstone bodies define a northeast-southwest fairway that is approximately 230 km long and 100 km wide across the central portion of the Illinois Basin. These sandstones commonly contain relatively thin oil reservoirs and were found to have associated underlying residual oil zones (ROZs). The presence of a thick brine aquifer underlying the ROZ and high vertical permeability results in characteristic low primary oil recovery caused by excessive brine production from the aquifer. Nonconventional CO 2 -EOR in these oil reservoirs are expected to require more CO 2 to produce a unit of oil compared to conventional CO 2 -EOR. Consequently, nonconventional CO 2 -EOR will have a higher storage component and offer a unique storage opportunity. An integrated approach of detailed site-specific geologic reservoir characterization, three-dimensional geocellular modeling, and reservoir simulation of multiple development cases at Noble Field was employed to determine development strategies for CO 2 -EOR and storage. The findings of Noble Field research were leveraged to assess the regional CO 2 -EOR and associated storage resource within the nonconventional reservoirs of the thick Cypress Sandstone in the Illinois Basin. Regional characterization shows that thick, multistory fluvial facies of the Cypress Sandstone exhibits porosity from 15% to 21% and horizontal and vertical permeability up to approximately 0.98 µm 2 (1,000 mD). Oil saturation indicators screened from well records and well log analyses were used to map 27 brownfield and greenfield ROZ prospects with residual oil saturation (S OR ) values ranging from 14 to 35%. ROZ thickness varies from 2.7 to 21.6 m (9 to 71 ft). The 27 Cypress Sandstone ROZ prospects have approximately 290.8 million m 3 (1.8 billion barrels) of oil in place. Specific CO 2 -EOR development strategies depend on the goals of the project (prioritizing EOR performance vs. storage performance and NCNO) and geologic setting (brownfield vs greenfield), and company’s business strategies (economic metrics). Nevertheless, applying two unique development strategies derived from reservoir simulation of the depleted main pay zone and ROZ in the Cypress Sandstone at Noble Field, 31.1 million m 3 (196 million barrels) of oil is estimated to be recoverable using the 80-acre blanket WAG development strategy (which favors EOR and economic metrics, but is carbon positive) whereas 21.3 million m 3 (144 million barrels) of oil is estimated to be recoverable using the 40-acre high CO 2 injection rate development strategy (which favors storage and economic metrics and results in net carbon negative oil production). Storage of CO 2 associated with EOR in these ROZ prospects alone, not accounting for associated main pay zones, underlying brine formation, or intervals adjacent to or between prospects, is estimated to be up to 10.4 billion tonnes using the latter development strategy.
CO 2 Sequestration Assessment of the basal sandstone in Tennessee (SECARB Phase III Work Product 1.6.a)
Geologic carbon sequestration is the permanent storage of CO 2 in deep underground geologic formations, which is preceded by the separation and capture of CO 2 at the point of emissions from a stationary source such as a coal-fired electric power plant. The United States Department of Energy’s (DOE’s) Office of Fossil Energy National Energy Technological Laboratory (NETL) is engaged in research and development of Carbon Sequestration Program technology. This report assesses potential geologic carbon dioxide (CO 2 ) storage capacity of the basal sandstone in Tennessee. The Southeast Regional Carbon Sequestration Partnership evaluated the Basal Sandstone in Tennessee for potential to store commercial quantities of CO 2 . This report expands upon the findings from the 2007 assessment of potential CO 2 storage reservoirs in the southeast United States, which included an initial assessment of the basal sandstone capacity. These estimates are based on limited and generalized data sets, which are primarily from published literature. In the 2007 report, the depth range for the basal sandstone was found to be 4,000 to 8,000 feet (ft) and the average thickness was 100 ft. The capacity estimate for the basal sandstone from the 2007 report was 2.5 gigatons (Gt) (metric) of CO 2 . Recognized the need for a more accurate estimate of capacity for the geologic sinks. This report provides a site specific, detailed geologic investigation of the basal sandstone. In this report the CO 2 storage capacity of the basal sandstone in Tennessee is assessed using an average reservoir total porosity, gross formation thickness, and average storage reservoir depth and pressure. The methodology is based on the capacity assessment methodology for saline aquifers in the United States Department of Energy 2010 Carbon Sequestration Atlas of the United States and Canada. Storage capacities are summarized in Table ES-1.
Impacts on mechanical strength of chemical reactions induced by hydrous supercritical CO2 in Boise Sandstone
Geomechanics experiments were used to assess mechanical alteration of Boise Sandstone promoted by reactions with supercritical carbon dioxide (scCO 2 ) and water vapor. During geologic carbon storage, scCO 2 is injected into subsurface reservoirs, forming buoyant plumes. At brine-plume interfaces, scCO 2 can dissolve into native brines, and water from brines can partition into scCO 2 , forming hydrous scCO 2 . This study investigates the effect of hydrous scCO 2 on the strength of Boise Sandstone. Samples are first exposed to recirculating hydrous scCO 2 for 24 h at 70 °C and 13.8 MPa scCO 2 pressure. Samples are reacted with scCO 2 with added water contents up to 500 mL. After scCO 2 exposure, samples are deformed at room temperature under confining pressures of 3.4, 6.9, and 10.3 MPa. The results demonstrate that hydrous scCO 2 induces chemical reactions in Boise Sandstone, with ions migrating from the solid into the hydrous scCO 2 phase. At the longer time-scales, these reactions could lead to mechanical weakening in the samples; however, on the scale of our experiments, the strength changes are within sample variability. Because the solubility of water in scCO 2 is extremely low (0.008 mol H 2 O per 1 mol CO 2 ), the mineral dissolution of Boise Sandstone was under 0.002 wt.%. Additionally, mineral grains and pore throats in Boise Sandstone are cemented with quartz, which is not susceptible to dissolution at these conditions. Our results indicate that humidity in scCO 2 plumes is unlikely to sustain chemical reactions and induce long term strength changes in quartz cemented sandstones due to resistant mineralogies and low water solubility.
The Geology of The Mt. Simon Sandstone Storage Complex at the Wabash #1 Well, Vigo Co., Indiana (Subtask 7.2, Technical Report)
The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for commercial-scale CO 2 storage near the site. This report presents an extensive geologic characterization of the Mt. Simon storage complex and relevant data collected from the Wabash #1 well, such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Mt. Simon Sandstone. The Mt. Simon storage complex comprises two major sections: the Mt. Simon Sandstone as the potential reservoir and the overlying Eau Claire Formation as its primary seal. Within the report, an extensive depositional, sedimentological, and geochronologic characterization of the Mt. Simon is included with supportive chapters on the regional geology and the geophysical, petrophysical, and petrologic data collected during the project. An overview of 2D seismic reflection data collected from and around the test well is presented. Also presented are chapters on the characterization of the sealing Eau Claire Formation, including a chapter on the capacity of the primary and secondary seals to the Mt. Simon as well as a chapter on geomechanical testing results of the Eau Claire Formation and Mt. Simon Sandstone. Some of the information discussed in this report was used in the development of static and dynamic geologic models of the Mt. Simon Sandstone storage complex. The static and dynamic modeling of CO 2 injection in the Mt. Simon Sandstone are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.
Diagenesis Along Fractures in an Eolian Sandstone, Gale Crater, Mars
The Mars Science Laboratory rover Curiosity has been exploring sedimentary deposits in Gale crater since August 2012. The rover has traversed up section through approx.100 m of sedimentary rocks deposited in fluvial, deltaic, lacustrine, and eolian environments (Bradbury group and overlying Mount Sharp group). The Stimson formation lies unconformable over a lacustrine mudstone at the base of the Mount Sharp group and has been interpreted to be a cross-bedded sandstone of lithified eolian dunes. Mineralogy of the unaltered Stimson sandstone consists of plagioclase feldspar, pyroxenes, and magnetite with minor abundances of hematite, and Ca-sulfates (anhydrite, bassanite). Unaltered sandstone has a composition similar to the average Mars crustal composition. Alteration "halos" occur adjacent to fractures in the Stimson. Fluids passing through these fractures have altered the chemistry and mineralogy of the sandstone. Silicon and S enrichments and depletions in Al, Fe, Mg, Na, K, Ni and Mn suggest aqueous alteration in an open hydrologic system. Mineralogy of the altered Stimson is dominated by Ca-sulfates, Si-rich X-ray amorphous materials along with plagioclase feldspar, magnetite, and pyroxenes, but less abundant in the altered compared to the unaltered Stimson sandstone and lower pyroxene/plagioclase feldspar. The mineralogy and geochemistry of the altered sandstone suggest a complicated history with several (many?) episodes of aqueous alteration under a variety of environmental conditions (e.g., acidic, alkaline).
Illitization in the Mt. Simon Sandstone, Illinois Basin, USA: Implications for carbon dioxide storage
Clay mineral cementation is one of the most important controls on sandstone reservoir properties. Here, in this paper, the diagenetic history of the Mt. Simon reservoir complex is studied to reveal the origin, timing, and controls of illitization. Samples of sandstone and shale from Mt. Simon reservoir complex were acquired from the Illinois Basin–Decatur Project (IBDP), a CO 2 storage demonstration project in the central Illinois Basin. Petrographic, SEM, TEM, XRD analyses and K/Ar age dating were completed to identify the major detrital and diagenetic components of the samples and reveal illite to be the major clay component in all samples. Illitic clay coatings in the lower Mt. Simon reservoir are identified as a major control on reservoir properties by inhibiting major precipitation of authigenic quartz during illitization, resulting in highly permeable sandstone, essential for CO 2 storage. The coating box-work morphology and mineralogy are indicative of a detrital smectite origin with subsequent illite growth associated with feldspar dissolution and kaolinite alteration. The mineralogy of bulk material and separate grain size fractions (2–0.6 μm; 0.6–0.2 μm; < 0.2 μm) with illite polytypes 2M 1 , 1M, and 1M d were quantified and age dated via 40 K- 40 Ar methods. The shales or reservoir seals contain the highest proportions of detrital illite with illite in the lower Mt. Simon Sandstone reservoir identified as solely diagenetic. Two major events of illitization are identified throughout the Mt. Simon with more porous reservoir rock exhibiting the older event from approximately 360 to 315 Ma and tighter sandstone units with reservoir properties too low to be considered reservoir exhibiting illite dates from 250 to 220 Ma. This partitioning of illitization is attributed to varied mineralogy controlled by depositional changes and evolution of the greater basin.