SEARCH · Search NASA

Results for “SAR SAR imaging algorithms algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1992

New approaches in interferometric SAR data processing

It is well established that interferometric synthetic aperture radar (SAR) images can be inverted to perform surface elevation mapping. Among the factors critical to the mapping accuracy are registration of the interfering SAR images and phase unwrapping. A novel registration algorithm is presented that determines the registration parameters through optimization. A new figure of merit is proposed that evaluates the registration result during the optimization. The phase unwrapping problem is approached through a new method involving fringe line detection. The algorithms are tested with two SEASAT SAR images of terrain near Yellowstone National Park. These images were collected on Seasat orbits 1334 and 1420, which were very close together in space, i.e., less than 100 m. The resultant elevation map is compared with the USGS digital terrain elevation model.

Lin, Qian↗

NASA NTRS1991

Topography estimation with interferometric synthetic aperture radar using fringe detection

Methods are presented for using Synthetic Aperture Radar (SAR) interferometry data to estimate surface topography. An expression is given to relate the elevation of a ground point to the phase difference of SAR images received from two spatially separated antennas. An iterative algorithm which solves for the position and elevation of each point in the image simultaneously is developed. One of the critical issues that determines the accuracy of the terrain mapping is the phase unwrapping. An approach to the problem by fringe line detection is proposed. The algorithms are tested with two Seasat SAR images of terrain near Yellowstone National Park. The resultant elevation map is compared with a USGS terrain elevation model. The error of the SAR elevation with respect to the digital terrain map is about 8.2 percent of the total terrain variation.

Lin, Qian↗

NASA NTRS1985

Maximum likelihood classification of synthetic aperture radar imagery

Classification of synthetic aperture radar (SAR) images has important applications in geology, agriculture, and the military. A statistical model for SAR images is reviewed and a maximum likelihood classification algorithm developed for the classification of agricultural fields based on the model. It is first assumed that the target feature information is known a priori. The performance of the algorithm is then evaluated in terms of the probability of incorrect classification. A technique is also presented to extract the needed feature information from a SAR image; then both the feature extraction and the maximum likelihood classification algorithms are tested on a SEASAT-A SAR image.

Frost, V. S.↗

NASA NTRS1993

Topographic slope from the SAR interferometric phase gradient

A new algorithm for the direct calculation of topographic slope maps from synthetic aperture radar (SAR) interferograms is presented. The algorithm derives slope maps without first requiring the creation of a digital elevational model (DEM) from the interferogram, thus obviating the need for high SNR in the interferogram and altitude calibration points for the scene. SAR data useful for interferometry has been collected by the Active Microwave Imager on board the ERS-1 satellite, when it was in a short period repeat orbit. Two passes of the radar sensor form a cross-track interferometric baseline. For a point target at some position (x,y,h), the interferometric phase difference phi is proportional to the difference in path lengths for the two sensor positions to the scatterer. Given the phase difference as measured in the complex interferogram and an accurate baseline geometry, the position of the scatterer, most significantly the height h, can be determined through triangulation. The interferometric phase measurement however is known only modulo 2-pi, and hence it is necessary to determine the correct multiple of 2-pi to add to the phase at each point to obtain an estimate of the actual phase with respect to an absolute datum. This phase unwrapping process is required for creating DEM's, and is difficult or impossible for regions of low SNR or SAR image layover. The new algorithm described here derives slope maps without requiring phase unwrapping.

Werner, Charles L.↗

NASA NTRS2011

Wavelet Filter Banks for Super-Resolution SAR Imaging

This paper discusses Innovative wavelet-based filter banks designed to enhance the analysis of super resolution Synthetic Aperture Radar (SAR) images using parametric spectral methods and signal classification algorithms, SAR finds applications In many of NASA's earth science fields such as deformation, ecosystem structure, and dynamics of Ice, snow and cold land processes, and surface water and ocean topography. Traditionally, standard methods such as Fast-Fourier Transform (FFT) and Inverse Fast-Fourier Transform (IFFT) have been used to extract Images from SAR radar data, Due to non-parametric features of these methods and their resolution limitations and observation time dependence, use of spectral estimation and signal pre- and post-processing techniques based on wavelets to process SAR radar data has been proposed. Multi-resolution wavelet transforms and advanced spectral estimation techniques have proven to offer efficient solutions to this problem.

Sheybani, Ehsan O.↗

NASA NTRS1992

Improvements In Processing And Aiming For Squint-Mode SAR

Improved technique for aiming antenna of synthetic-aperture radar (SAR) operating in squint imaging mode (SIM) complements improved algorithm for processing raw SIM SAR data. Developed to reduce deleterious effects of two unique characteristics of SIM SAR: large range walk and large variation of Doppler centroid as function of range.

Chang, Chi Y.↗

NASA NTRS1992

Robustness of Spann-Wilson segmentation on SAR imagery

The performances of the Spann-Wilson algorithm on simulated synthetic aperture radar (SAR) images with varying degrees of speckle (one to four looks and varying amounts of white noise) is described. One hundred forty-eight test images are considered, of which the algorithm segmented most without any adjustment to the algorithm's parameters. The effect of speckle on fractal boundaries is studied. The effect of varying multiplicative and additive noise distributions for a fixed set of segmentation parameters is examined. The modified Spann-Wilson algorithm on four-look imagery is evaluated.

Daida, Jason M.↗

NASA NTRS1995

Estimation of Boreal Forest Biomass Using Spaceborne SAR Systems

In this paper, we report on the use of a semiempirical algorithm derived from a two layer radar backscatter model for forest canopies. The model stratifies the forest canopy into crown and stem layers, separates the structural and biometric attributes of the canopy. The structural parameters are estimated by training the model with polarimetric SAR (synthetic aperture radar) data acquired over homogeneous stands with known above ground biomass. Given the structural parameters, the semi-empirical algorithm has four remaining parameters, crown biomass, stem biomass, surface soil moisture, and surface rms height that can be estimated by at least four independent SAR measurements. The algorithm has been used to generate biomass maps over the entire images acquired by JPL AIRSAR and SIR-C SAR systems. The semi-empirical algorithms are then modified to be used by single frequency radar systems such as ERS-1, JERS-1, and Radarsat. The accuracy. of biomass estimation from single channel radars is compared with the case when the channels are used together in synergism or in a polarimetric system.

Saatchi, Sassan↗

NASA NTRS1987

SAR image data compression for an on-line archive system

This paper summarizes the investigation of SAR image data compression for an on-line archive data distribution system. This system is planned for the ground processing system of Alaska SAR Facility (ASF) and Shuttle Imaging Radar (SIR-C). The objective of the SAR image data compression is to enable the data archive system to provide the remote users a large data base with good image quality, short response time, low transfer cost, and minimal decoding complexity. The requirements and limitations of the on-line archive data distribution system are presented. The effects of SAR image data characteristics on data compression are addressed. The users' survey results suggest that compression ratios between 10:1 and 20:1 appear suitable. Based on the algorithm evaluation results, the two-level tree-searched vector quantization technique has been recommended as the SAR image data compression algorithm for the on-line archive data distribution system.

Chang, C. Y.↗

NASA NTRS1978

Synthetic Aperture Radar (SAR) data processing

The available and optimal methods for generating SAR imagery for NASA applications were identified. The SAR image quality and data processing requirements associated with these applications were studied. Mathematical operations and algorithms required to process sensor data into SAR imagery were defined. The architecture of SAR image formation processors was discussed, and technology necessary to implement the SAR data processors used in both general purpose and dedicated imaging systems was addressed.

Beckner, F. L.↗

NASA NTRS2001

Identification of Surface and Near Surface Defects and Damage Evaluation by Laser Speckle Techniques

As a part of the grant activity, a laboratory was established within the Department of Electrical Engineering for the study for measurements of surface defects and damage evaluation. This facility has been utilized for implementing several algorithms for accurate measurements of defects. Experiments were conducted using simulated images and multiple images were fused to achieve accurate measurements. During the nine months of the grants when the principal investigator was transferred in my name, experiments were conducted using simulated synthetic aperture radar (SAR) images. This proved useful when several algorithms were used on images of smooth objects with minor deformalities. Given the time constraint, the derived algorithms could not be applied to actual images of smooth objects with minor abnormalities.

Gowda, Chandrakanth H.↗

NASA NTRS1990

Opening and closing of sea ice leads - Digital measurements from synthetic aperture radar

An algorithm that uses two sequential SAR digital images to measure the opening and closing of sea ice leads is introduced. The methods used to analyze the SAR images is described, including the mesh of tie points and the classification of leads and ice. The results of the anaylsis are compared with independent manual measurements, showing that the cells covering each lead are best interpreted as opening or closing in a group, rather than individually. Also, consideration is given to an automated algorithm for grouping cells, the possibility of simplifying the method, and the relationship between the opening and closing measurements and the theory of their parametric relation to mean deformation.

Fily, M.↗

NASA NTRS1980

A software-based system which produces SEASAT SAR imagery

A digital processing algorithm and its associated system design for producing images from SEASAT synthetic aperture radar (SAR) data is described. The proposed system uses the fast Fourier transform approach to perform the two dimensional correlation process. The range migration problem can be alleviated by approximating the locus of echoes from a point target by several linear segments. Data corresponding to each segment are correlated separately and the results are coherently summed to produce full resolution images. This processing approach exhibits high computation efficiency and simple processing control functions. It is particularly attractive for software implementation based on general purpose computers. Results of this implementation and examples of digitally correlated SEASAT SAR imagery are discussed.

Wu, C.↗

NASA NTRS1991

A finite mixtures algorithm for finding classes in images

The authors describe an algorithm for estimating the proportions of classes in a SAR (synthetic aperture radar) image without any user interaction. The method assumes that the image is a mixture of a known number of different pixel types. A maximum likelihood estimate of the parameters of the resulting mixture distribution is then used to find the proportions for the various classes. The technique was successfully applied to aircraft SAR images of sea ice. Computer simulations were used to determine the relative errors of the technique. The technique performs well even with extremely noisy images.

Samadani, Ramin↗

NASA NTRS1976

A digital system to produce imagery from SAR data

This paper describes a digital processing algorithm and its associated system design for producing images from Synthetic Aperture Radar (SAR) data. The proposed system uses the Fast Fourier Transform (FFT) approach to perform the two-dimensional correlation process. The range migration problem, which is often a major obstacle to efficient processing, can be alleviated by approximating the locus of echoes from a point target by several linear segments. SAR data corresponding to each segment is correlated separately, and the results are coherently summed to produce full-resolution images. This processing approach exhibits greatly improved computation efficiency relative to conventional digital processing methods.

Wu, C.↗

NASA NTRS1980

A digital fast correlation approach to produce SEASAT SAR imagery

This paper describes a digital processing algorithm and its associated system design for producing images from SEASAT Synthetic Aperture Radar (SAR) data. The proposed system uses the fast Fourier transform approach to perform the two-dimensional correlation process. The range migration problem, which is often a major obstacle to efficient processing, can be alleviated by approximating the locus of echoes from a point target by several linear segments. SAR data corresponding to each segment is correlated separately, and the results are coherently summed to produce full-resolution images. This processing approach exhibits high computation efficiency and simple processing control functions. It is particularly attractive for software implementation based on general purpose computer. Results of this implementation and examples of digitally correlated SEASAT SAR imagery are discussed

Wu, C.↗

NASA NTRS1979

Synthetic aperture radar/LANDSAT MSS image registration

Algorithms and procedures necessary to merge aircraft synthetic aperture radar (SAR) and LANDSAT multispectral scanner (MSS) imagery were determined. The design of a SAR/LANDSAT data merging system was developed. Aircraft SAR images were registered to the corresponding LANDSAT MSS scenes and were the subject of experimental investigations. Results indicate that the registration of SAR imagery with LANDSAT MSS imagery is feasible from a technical viewpoint, and useful from an information-content viewpoint.

Maurer, H. E.↗

NASA NTRS2003

Modified Polar-Format Software for Processing SAR Data

HMPF is a computer program that implements a modified polar-format algorithm for processing data from spaceborne synthetic-aperture radar (SAR) systems. Unlike prior polar-format processing algorithms, this algorithm is based on the assumption that the radar signal wavefronts are spherical rather than planar. The algorithm provides for resampling of SAR pulse data from slant range to radial distance from the center of a reference sphere that is nominally the local Earth surface. Then, invoking the projection-slice theorem, the resampled pulse data are Fourier-transformed over radial distance, arranged in the wavenumber domain according to the acquisition geometry, resampled to a Cartesian grid, and inverse-Fourier-transformed. The result of this process is the focused SAR image. HMPF, and perhaps other programs that implement variants of the algorithm, may give better accuracy than do prior algorithms for processing strip-map SAR data from high altitudes and may give better phase preservation relative to prior polar-format algorithms for processing spotlight-mode SAR data.

Chen, Curtis↗