Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCRAMJET ENGINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Thermodynamic Analysis of Dual-Mode Scramjet Engine Operation and Performance

Recent analytical advances in understanding the performance continuum (the thermodynamic spectrum) for air-breathing engines based on fundamental second-law considerations have clarified scramjet and ramjet operation, performance, and characteristics. Second-law based analysis is extended specifically in this work to clarify and describe the performance characteristics for dual-mode scramjet operation in the mid-speed range of flight Mach 4 to 7. This is done by a fundamental investigation of the complex but predictable interplay between heat release and irreversibilities in such an engine; results demonstrate the flow and performance character of the dual mode regime and of dual mode transition behavior. Both analytical and computational (multi-dimensional CFD) studies of sample dual-mode flow-fields are performed in order to demonstrate the second-law capability and performance and operability issues. The impact of the dual-mode regime is found to be characterized by decreasing overall irreversibility with increasing heat release, within the operability limits of the system.

Riggins, David↗
NASA NTRS1976

Exploratory study of transient upstart phenomena in a three-dimensional fixed-geometry scramjet engine

The structural and thermal design of a hydrogen fueled regeneratively cooled three dimensional fixed geometry scramjet was examined. An exploratory study was conducted at Mach 5.3 in the 7-inch Mach 7 pilot tunnel to investigate the unstart phenomena and to provide the experimental data base required to predict the design pressure loads. The test results indicate that the peak pressures occurred during the transient unstart and not during steady state started or unstarted flow conditions. The local peak pressures can be conservatively predicted by normal shock wave theory as the peak approaches the pressure that would exist behind a stationary normal shock with an upstream Mach number equal to the area weighted local Mach number for the normal started condition.

Wieting, A. R.↗
NASA NTRS1987

Numerical analysis of flow through scramjet engine inlets

A set of computer programs was developed to analyze flow through supersonic combustion ramjet (scramjet) inlets. These programs solve either the two or three dimensional Euler/Navier-Stokes equations in full conservation form by MacCormack's explicit or explicit-implicit method. An algebraic two-layer eddy viscosity model is used for turbulent flow calculations. The programs are operational in Control Data CYBER-200 series vector-processing computer system and were optimized to take maximum advantage of the vector processing capability of the system. Since their development, the programs were extensively verified and used to analyze a number of very complex inlet configurations. Results are presented from two-dimensional, quasi-three-dimensional, and three-dimensional analyses of the inlet flow field to illustrate the use of the program.

Kumar, Ajay↗
NASA NTRS1987

Numerical analysis of flow through scramjet engine inlets

A set of computer programs has been developed to analyze flow through supersonic combustion ramjet (scramjet) inlets. These programs solve either the two- or three-dimensional Euler/Navier-Stokes equations in full conservation form by MacCormack's explicit or explicit-implicit method. An algebraic two-layer eddy viscosity model is used for turbulent flow calculations. The programs are operational on Control Data CYBER-200 series vector-processing computer system and have been optimized to take maximum advantage of the vector processing capability of the system. Since their development, the programs have been extensively verified and used to analyze a number of very complex inlet configurations. In this paper, results are presented from two-dimensional, quasi-three-dimensional, and three-dimensional analyses of the inlet flow field to illustrate the use of the programs.

Kumar, Ajay↗
NASA NTRS2004

Analysis and Design of Rectangular-Cross-Section Nozzles for Scramjet Engine Testing

The flow in the square-cross-section Mach-6 nozzle used in the NASA Langley Research Center Arc-Heated Scramjet Test Facility has been analyzed using three-dimensional viscous CFD methods. The primary cause of the non-uniform flow exiting the nozzle is identified as cross-flow pressure gradients imposed on wall boundary layers. The cross-flow pressure gradients cause the boundary layer to roll up into counter-rotating vortex pairs on each of the four sides of the nozzle. These four vortex pairs produce significant non-uniformity in the nozzle-exit flow. In order to improve the quality of the test flow in the facility, two alternative nozzle designs (one axisymmetric and one rectangular with a 2-D contour) have been investigated. While the axisymmetric design produced the most uniform flow, the 2-D design also produced very good flow. The 2-D design was selected for further refinement, resulting in a new nozzle design which has been constructed and awaits calibration.

Gaffney, Richard L., Jr.↗
NASA NTRS1990

Development and fabrication of structural components for a scramjet engine

A program broadly directed toward design and development of long-life (100 hours and 1,000 cycles with a goal of 1,000 hours and 10,000 cycles) hydrogen-cooled structures for application to scramjets is presented. Previous phases of the program resulted in an overall engine design and analytical and experimental characterization of selected candidate materials and concepts. The latter efforts indicated that the basic life goals for the program can be reached with available means. The main objective of this effort was an integrated, experimental evaluation of the results of the previous program phases. The fuel injection strut was selected for this purpose, including fabrication development and fabrication of a full-scale strut. Testing of the completed strut was to be performed in a NASA-Langley wind tunnel. In addition, conceptual designs were formulated for a heat transfer test unit and a flat panel structural test unit. Tooling and fabrication procedures required to fabricate the strut were developed, and fabrication and delivery to NASA of all strut components, including major subassemblies, were completed.

Buchmann, O. A.↗
DOE OSTI2024

Flame kinetics at scramjet-engine-relevant conditions: Role of prompt dissociation of weakly-bound radicals

Combustion in high-speed ram-based propulsion engines occurs under distinct thermodynamic conditions of high reactant temperatures (greater than 1000 K) and relatively low pressures (<5 atm). There is a lack of fundamental flame measurements at such conditions that result in adiabatic flame temperatures (T ad ) exceeding 2500 K. In this work, we have measured laminar flame speeds of oxygen-enriched CH 4 /oxidizer mixtures at sub-atmospheric conditions to probe kinetics at high T ad using the isobaric spherically expanding flame approach. Simulations with recent kinetic models revealed increasing differences between data and model predictions with increasing T ad , reaching up to 25 %. Kinetic analyses reveal that at the thermodynamic conditions in these O 2 -enriched flames, i.e., lower pressures and higher T ad , the effects of HCO prompt dissociation are accentuated. In addition to HCO, the prompt dissociations of CH 2 OH and C 2 H 5 are also considered. Here, the prompt dissociations of all three radicals were evaluated and their effects considered in flame speed simulations. Reaction path analysis for the present flames revealed that approximately half of the reaction flux for HCO formation undergoes prompt dissociation to H + CO. Furthermore, these analyses also revealed that the pathways and sensitive reactions are similar between oxygen-enriched fuel/oxidizer mixtures and preheated fuel/air mixtures, if both have similar T ad . Thus, flames of oxygen-enriched mixtures could be a surrogate to probe the flame chemistry of highly preheated mixtures at relatively low pressures that are often encountered in ram-based propulsion engine combustors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Direct-connect test of a hydrogen-fueled three-strut injector for an integrated modular scramjet engine

The study aims at illustrating the effects of strut and injector interactions and strut wakes not totally simulated in previous, less complex, direct-connect hardware. In addition, the influence of the relative location of the injectors on opposite sides of each strut and the effect of injector spacing are evaluated. It is shown that better mixing efficiency is attained by locating the fuel injectors on opposite sides of a strut so that the jets come together, rather than being staggered, in the strut wake. It is not possible to determine the combustion efficiency by means of a one-dimensional analysis of the wall pressure.

Mcclinton, C. R.↗
NASA NTRS1990

Shock interference heating in scramjet engines

Experimental and analytical research sponsored by the NASA Langley Research center and the NASP Structures Technology Maturation Program to define critical aerothermal loads for the NASP engine is summarized. Presented is a review of (1) shock-shock interaction on the engine cowl leading edge that results in a supersonic jet impinging on the leading edge surface and causes the heat transfer rate to be amplified by a factor of 30 or more over the undisturbed (no shock interaction) flow stagnation point heat transfer rate, (2) the effectiveness of supersonic film cooling with and without the effects of an impinging oblique shock wave, and (3) oblique shock impingement in an axial compression corner.

Wieting, Allan R.↗
NASA NTRS1992

Resonance lamp absorption measurement of OH number density and temperature in expansion tube scramjet engine tests

In this paper, we report results of hydroxyl radical and static temperature measurements performed in the General Applied Science Laboratories-NASA HYPULSE expansion tube facility using the microwave resonance lamp absorption technique. Data were obtained as part of a series of hydrogen/air and hydrogen/oxygen combustion tests at stagnation enthalpies corresponding to Mach 17 flight speeds. Data from a representative injector configuration is compared to a full Navier-Stokes CFD solution.

Lempert, Walter R.↗
NASA NTRS1992

Visualization of hydrogen injection in a scramjet engine by simultaneous PLIF imaging and laser holographic imaging

Flowfield characterization has been accomplished for several fuel injector configurations using simultaneous planar laser induced fluorescence (PLIF) and laser holographic imaging (LHI). The experiments were carried out in the GASL-NASA HYPULSE real gas expansion tube facility, a pulsed facility with steady test times of about 350 microsec. The tests were done at simulated Mach numbers 13.5 and 17. The focus of this paper is on the measurement technologies used and their application in a research facility. The HYPULSE facility, the models used for the experiments, and the setup for the LHI and PLIF measurements are described. Measurement challenges and solutions are discussed. Results are presented for experiments with several fuel injector configurations and several equivalence ratios.

Anderson, Robert C.↗
NASA NTRS2002

Application of Modern Design of Experiments to CARS Thermometry in a Model Scramjet Engine

We have applied formal experiment design and analysis to optimize the measurement of temperature in a supersonic combustor at NASA Langley Research Center. We used the coherent anti-Stokes Raman spectroscopy (CARS) technique to map the temperature distribution in the flowfield downstream of an 1160 K, Mach 2 freestream into which supersonic hydrogen fuel is injected at an angle of 30 degrees. CARS thermometry is inherently a single-point measurement technique; it was used to map thc flow by translating the measurement volume through the flowfield. The method known as "Modern Design of Experiments" (MDOE) was used to estimate the data volume required, design the test matrix, perform the experiment and analyze the resulting data. MDOE allowed us to match the volume of data acquired to the precision requirements of the customer. Furthermore, one aspect of MDOE, known as response surface methodology, allowed us to develop precise maps of the flowfield temperature, allowing interpolation between measurement points. An analytic function in two spatial variables was fit to the data from a single measurement plane. Fitting with a Cosine Series Bivariate Function allowed the mean temperature to be mapped with 95% confidence interval half-widths of +/- 30 Kelvin, comfortably meeting the confidence of +/- 50 Kelvin specified prior to performing the experiments. We estimate that applying MDOE to the present experiment saved a factor of 5 in data volume acquired, compared to experiments executed in the traditional manner. Furthermore, the precision requirements could have been met with less than half the data acquired.

Danehy, P. M.↗
NASA NTRS2004

Subscale Testing of a Ceramic Composite Cooled Panel Led to Its Design and Fabrication for Scramjet Engine Testing

In a partnership between the NASA Glenn Research Center and Pratt & Whitney, a ceramic heat exchanger panel intended for use along the hot-flow-path walls of future reusable launch vehicles was designed, fabricated, and tested. These regeneratively cooled ceramic matrix composite (CMC) panels offer lighter weight, higher operating temperatures, and reduced coolant requirements in comparison to their more traditional metallic counterparts. A maintainable approach to the design was adopted which allowed the panel components to be assembled with high-temperature fasteners rather than by permanent bonding methods. With this approach, the CMC hot face sheet, the coolant containment system, and backside structure were all fabricated separately and could be replaced individually as the need occurred during use. This maintainable design leads to both ease of fabrication and reduced cost.

Jaskowiak, Martha H.↗
NASA NTRS2002

The Role of Formal Experiment Design in Hypersonic Flight System Technology Development

Hypersonic airbreathing engine (scramjet) powered vehicles are being considered to replace conventional rocket-powered launch systems. Effective utilization of scramjet engines requires careful integration with the air vehicle. This integration synergistically combines aerodynamic forces with propulsive cycle functions of the engine. Due to the highly integrated nature of the hypersonic vehicle design problem, the large flight envelope, and the large number of design variables, the use of a statistical design approach in design is effective. Modern Design-of-Experiments (MDOE) has been used throughout the Hyper-X program, for both systems analysis and experimental testing. Application of MDOE fall into four categories: (1) experimental testing; (2) studies of unit phenomena; (3) refining engine design; and (4) full vehicle system optimization. The MDOE process also provides analytical models, which are also used to document lessons learned, supplement low-level design tools, and accelerate future studies. This paper will discuss the design considerations for scramjet-powered vehicles, specifics of MDOE utilized for Hyper-X, and present highlights from the use of these MDOE methods within the Hyper-X Program.

McClinton, Charles R.↗
NASA NTRS1982

A numerical solution of the supersonic flow over a rearward facing step with transverse non-reacting hydrogen injection

The present investigation represents an application of computational fluid dynamics to a problem associated with the flow in the combustor region of a supersonic combustion ramjet engine (scramjet). The governing equations are considered, taking into account the Navier-Stokes equations, a molecular viscosity calculation, the molecular thermal conductivity, molecular diffusion, and a turbulence model. The employed numerical solution is patterned after the explicit, time-dependent, unsplit, predictor-corrector, finite-difference method given by MacCormack (1969). The calculation is concerned with the supersonic flow over a rearward-facing step with transverse H2 injection at conditions germane to the combustor region of a scramjet engine. The H2 jet acts as an effective body which essentially shields the primary flow from the rearward-facing step, thus substantially changing the wave pattern in the primary flow.

Berman, H. A.↗
NASA NTRS1990

Scramjet testing from Mach 4 to 20 - Present capability and needs for the nineties

Consideration is given to the development of testing methods for the National Aerospace Plane (NASP) program, focusing on techniques for simulating and testing scramjet engines and scramjet engine components during flight from Mach 4 to Mach 20. The flight conditions associated with the NASP are outlined and the stagnation temperatures and pressures required to simulate flight up to orbital speeds are presented. The types of test facilities needed for scramjet propulsion testing are discussed, including combustion-heated facilities, electric arc-heated facilities, convection-heated facilities, shock tunnels, and expansion tubes. Issues related to assessing the flow quality in the scramjet ground testing facilities are examined, including uniformity, contamination, dissociation, ionization, nonequilibrium, and turbulence. Direct-connect combustor versus free-jet scramjet engine tests are compared and the capabilities of current and near-future scramjet engine test facilities are evaluated.

Thomas, Scott R.↗