Search NASASearch

SEARCH · Search NASA

Results for “SIM time estimator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Challenges of Vapor Diffusion $Nb_3Sn$ Coating at Fermilab: Minimizing Impurities Using TOF-SIMS

Nb$_3$Sn demonstrates steady advancements nowadays offering reduced power cost in superconducting radio-frequency cavities due to its high critical temperature, quality factor, and achieved accelerating gradient. However, theoretical estimates of its radio-frequency parameters have not been achieved due to several potentially limiting mechanisms: tin spots, patchy regions, defects, thermal impedance, and impurities. While some of these limitations have been intensively studied, impurity analysis in Nb$_3$Sn coatings have received less attention. We report an investigation of impurities in several vapor-diffused Nb$_3$Snn coated samples using time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and show allowable impurity levels in view of superconducting cavity performance. Challenges and lessons learned in maintaining clean Nb$_3$Sn coatings are also discussed.

Tagdulang, N. [Fermilab]

Cross-correlation of SPT-3G D1 CMB lensing and DES Y3 galaxy lensing

Measurements of the weak lensing of galaxies and of the cosmic microwave background (CMB) provide direct probes of the cosmic matter density field, but the two observables are sensitive to different spatial scales, redshift ranges, and survey systematics. Their cross-correlation thus enables consistency checks of the theoretical model and of potential systematics in either dataset. We present measurements of the cross-correlation between CMB lensing and cosmic shear over $\sim$1,300 deg$^2$ of the sky using the SPT-3G D1 CMB lensing maps and the Dark Energy Survey Year 3 (DES Y3) shear catalogs. For the first time, we measure this cross-correlation at high significance ($\sim 14σ$) when using a polarization-only CMB lensing reconstruction that is expected to be robust against biases induced by extragalactic foregrounds. We test a variety of other CMB lensing estimators that include temperature information and exhibit different tradeoffs between foreground biases and noise, as well as a shear sample that consists of blue, star-forming galaxies and has been shown to be less impacted by galaxy intrinsic alignments. Assuming $Λ$CDM and marginalizing over uncertainties in intrinsic alignments, baryonic feedback, and various nuisance parameters, we obtain a constraint on the amplitude of matter clustering $S_8 \equiv σ_8 \sqrt{Ω_m / 0.3} = 0.833^{+0.047}_{-0.061}$, consistent with both the primary CMB results from Planck and shear-only results from DES Y3. By combining our measurement with Planck, we find mild constraints on the astrophysical processes that impact the cross-correlation. We obtain a constraint on the intrinsic alignment amplitude of the DES sample that is competitive with that from shear-only analyses, and we find a lower limit on the strength of baryonic feedback.

Ouellette, A. [Illinois U., Urbana] (ORCID:0000000

The SIM astronmetric grid

The Space Interferometry Mission (SIM) is fundamentally a one-dimensional instrument with a 15-degree field-of-regard. Mission objectives require a global reference grid of thousands of well-understood stars with positions known to 4 microarcseconds which will be used to establish the instrument baseline vector during scientific observations. This accuracy will be achieved by frequently observing a set of stars throughout the mission and performing a global fit of the observations to determine position, proper motion and parallax for each star. Each star will be observed approximately 200 times with about 6.5 stars per single instrument field on the sky. We describe the nature of the reference grid, the candidate objects, and the results of simulations demonstrating grid performance, including estimates of the grid robustness when including effects such as instrument drift and possible contamination of the grid star sample by undetected binaries.

SIM grid astrometry Space Interferometry Mission S

Updates to the Hanford Soil Inventory Model (SIM Version 2) for FY 2023

The purpose of this environmental calculation file (ECF) is to document the updates made to the Soil Inventory Model version 2.1 (SIM-v2.1) (ECF-HANFORD-21-0073, Updates to the Hanford Soil Inventory Model (SIM Version 2) for FY 2021) in FY 2023. These updates to SIM-v2.1 are referred to as the SIM-v2.2 version. The following updates have been made: • Include inventory estimate for a new analyte • hexavalent chromium (Cr(VI)), separate from total chromium inventory • Revise the inventory discharged to the 216-U-10 and 216-T-4 Pond systems based on partitioning of waste streams discharges over time and space among influent ditches and ponds • Enhance the preprocessing and postprocessing of the input and output files Note that the methodology for estimating Cr(VI) inventories is based on ECF-200W-23-0040, Recommendations for Updating Liquid Discharged Inventory and Transport Modeling Parameters for Cumulative Impacts Evaluation of Hexavalent Chromium in the 200 West Area while the revision of inventory discharged to the 216-U-10 and 216-T-4 Pond systems is based on ECF-HANFORD-19-0032, Distribution of Infiltration in the 216-U-10, 216-B-3 Pond, and 216-T-4 Pond Systems 1944-1997.

54 ENVIRONMENTAL SCIENCES

Applications of Satellite Data to Support Improvements in Irrigation and Groundwater Management in California

In agricultural regions around the world, threats to water supplies from drought and groundwater depletion are driving increased demand for tools to advance agricultural water use efficiency and support sustainable groundwater management. Satellite mapping of evapotranspiration (ET) from irrigated agricultural lands can provide agricultural producers and water resource managers with information that can be used to both optimize ag water use and improve estimates of groundwater withdrawals for irrigation. We describe the development of two remote sensing-based tools for ET mapping in California, including important lessons in terms of system design, partnership development, and transition to operations. For irrigation management, the integration of satellite data and surface sensor networks to provide timely delivery of information on crop water requirements can make irrigation scheduling more practical, convenient, and accurate.Developed through a partnership between NASA and the CA Department of Water Resources, the Satellite Irrigation Management Support (SIMS) framework integrates satellite data with information from agricultural weather networks to map crop canopy development and crop water requirements at the scale of individual fields. Information is distributed to agricultural producers and water managers via a web-based interface and web data services. SIMS also provides an API that facilitates integration with other irrigation decision support tools, such as CropManage and IrriQuest. Field trials using these integrated tools have shown that they can be used to sustain yields while improving water use efficiency and nutrient management. For sustainable groundwater management, the combination of satellite-derived estimates of ET and data on surface water deliveries for irrigation can increase the accuracy of estimates of groundwater pumping. We are developing an OpenET platform to facilitate access to ET data from multiple models and accelerate operational use of ET data in support of a range of water management applications, including implementation of the Sustainable Groundwater Management Act in CA. By providing a shared basis for decision making, we anticipate that the OpenET platform will accelerate implementation of solutions for sustainable groundwater management.

Satellite

GTOC9: Methods and Results from the Jet Propulsion Laboratory Team

The removal of 123 pieces of debris from the Sunsynchronous LEO environment is accomplished by a 10-spacecraft campaign wherein the spacecraft, flying in succession over an 8-yr period, rendezvous with a series of the debris objects, delivering a de-orbit package at each one before moving on to the next object by means of impulsive manoeuvres. This was the GTOC9 problem, as posed by the European Space Agency. The methods used by the Jet Propulsion Laboratory team are described, along with the winning solution found by the team. Methods include branch-and-bound searches that exploit the natural nodal drift to compute long chains of rendezvous with debris objects, beam searches for synthesising campaigns, ant colony optimisation, and a genetic algorithm. Databases of transfers between all bodies on a fine time grid are made, containing an easyto- compute yet accurate estimate of the transfer V . Lastly, a final non-linear programming optimisation is performed to ensure the trajectories meet all the constraints and are locally optimal in initial mass.

Sims, Jon

Excited-state uncertainties in lattice-QCD calculations of multi-hadron systems

Excited-state effects lead to hard-to-quantify systematic uncertainties in lattice quantum chromodynamics (LQCD) spectroscopy calculations when computationally accessible imaginary times are smaller than inverse excitation gaps, as often arises for multi-hadron systems with signal-to-noise problems. Lanczos residual bounds address this by providing two-sided constraints on energies that do not require assumptions beyond Hermiticity, but often give very conservative systematic uncertainty estimates. Here, a more-constraining set of gap bounds is introduced for hadron spectroscopy. These bounds provide tighter constraints whose validity requires an explicit assumption about an energy gap. Exactly solvable lattice field theory correlators are used to test the utility of residual and gap bounds at finite and infinite statistics. Two-sided bounds and other analysis methods are then applied to a high-statistics LQCD calculation of nucleon-nucleon scattering at $m_π\sim 800$ MeV. Generalized eigenvalue problem (GEVP) and Lanczos energy estimators are compatible when applied to the same correlator data, but analyses including different interpolating operators show statistically significant inconsistencies. However, two-sided bounds from all operators are consistent. Under the assumption that the number of energy levels below $NΔ$ and $ΔΔ$ thresholds is the same as for non-interacting nucleons, gap bounds are sufficient to constrain nucleon-nucleon scattering amplitudes at phenomenologically relevant precision. Lanczos methods further reveal that energy-eigenstate estimates from previously studied asymmetric correlators have not converged over accessible imaginary times. Nevertheless, data-driven examples demonstrate why assumptions are required to draw conclusions about the natures of two-nucleon ground states at these masses.

Detmold, William [MIT, Cambridge, CTP]

RFI-SIM: RFI Simulation Package

RFI-SIM simulates the RFI environment to estimate the interference from terrestrial emitters into spacecraft, or vice versa. A high-fidelity simulation of the RFI environment has been developed by employing all antenna- related and radar system-related parameters of multiple emitters, as well as that of the desired spacecraft. In the simulation, the real-time analysis of the interference and its effects on error budgets of a desired radar system is taken into account. This provides a reliable tool for radar system design to deal with RFI issues and to evaluate the sensitivity of various parts of a radar system including antenna pattern, RF front-end and digital processing to RFI signals.

Ghaemi, Hirad

Perturbations, TTVs & the (Un)reliability of Ephemerides of Kepler Planets

Fractional uncertainties quoted for orbital periods of the vast majority of planet candidates listed in recent Kepler catalogs are $<10^{-5}$, with values $\sim 10^{-6}$ (corresponding to 2 minutes per 4 years) being typical. These small uncertainties suggest ephemeris predictions for most Kepler planets are robust for decades to come. Tabulated periods list formal uncertainties in the mean times between midpoints of successive transits during the time interval in which transits were observed. However, transit timing variations (TTVs) produce errors in estimates of some planets’ orbital periods that need to be accounted for in certain dynamical investigations and ephemeris predictions. Periodic TTVs with timescales short compared to the interval of Kepler observations largely average out and do not produce significant errors in estimates of orbital periods. TTVs with timescales comparable to the interval of Kepler observations have been fit for dozens of Kepler planet candidates to estimate long-term average orbital periods (Holczer et al. 2016, ApJS 225, 9), and more detailed dynamical models have been used to estimate long-term average periods of a small number of well-studied planets. Most Kepler planets that show large TTVs are near mean-motion orbital resonances with other planets. The largest effect for planets moderately close to two-body resonances are due to rotation of the forced eccentricity vector by resonant perturbations; the timescale for this precession is typically short, so the variations tend to average out. Libration of planets locked in resonances typically occurs on timescales longer than the Kepler baseline, but few Kepler planets appear to be resonantly-locked. The more general but smaller (during the era of Kepler observations) effect is caused by secular precession of the planets' free eccentricities usually has a period much longer than the baseline of the Kepler observations, so it is not accounted for in estimates of mean periods or uncertainties. This precession causes a discrepancy between Kepler era mean orbital period and long-term mean orbital period can exist even for planets having TTVs that are too small to be observable during the epoch of Kepler observations.

Kepler

Probing Heavy Axion-like Particles from Massive Stars with X-rays and Gamma Rays

The hot interiors of massive stars in the later stages of their evolution provide an ideal place for the production of heavy axion-like particles (ALPs) with mass up to O(100 keV) range. We show that a fraction of these ALPs could stream out of the stellar photosphere and subsequently decay into two photons that can be potentially detected on or near the Earth. In particular, we estimate the photon flux originating from the spontaneous decay of heavy ALPs produced inside Horizontal Branch and Wolf-Rayet stars, and assess its detectability by current and future $X$-ray and gamma-ray telescopes. Our results indicate that current and future telescopes can probe axion-photon couplings down to $g_{a\gamma} \sim 4\times 10^{-11}$ GeV${}^{-1}$ for $m_a\sim 10-100$ keV, which covers new ground in the ALP parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS

On the 2018 Outburst of the Accreting Millisecond X-Ray Pulsar Swift J1756.9-2508 As Seen with NICER

We report on the coherent timing analysis of the 182 Hz accreting millisecond X-ray pulsar SwiftJ1756.92508during its 2018 outburst as observed with the Neutron Star Interior Composition Explorer (NICER). Combiningour NICER observations with Rossi X-ray Timing Explorer observations of the 2007 and 2009 outbursts, we alsostudied the long-term spin and orbital evolution of this source. We find that the binary system is well describedby a constant orbital period model, with an upper limit on the orbital period derivative of Pb < 7.4 ´ 10-13 ss1.Additionally, we improve upon the source coordinates through astrometric analysis of the pulse arrival times,finding R.A.=17h56m57 18±0 08 and decl.=25°0627 8±3 5, while simultaneously measuring thelong-term spin frequency derivative as n = -7.3 ´ 10-16 Hzs1. We briefly discuss the implications of thesemeasurements in the context of the wider population of accreting millisecond pulsars. We reported on the coherent timing analysis of the 2018 outburst of Swift J1756 as observed with NICER. Consistent with analyses of the previous outbursts (Krimm et al. 2007b; Patruno et al. 2010), we find that the X-ray pulsations have energy dependent amplitudes; the fractional amplitude of the fundamental increases with energy, whereas the fractional amplitude of the harmonic shows a slight decline with energy. This energy dependent behavior is not unusual in AMXPs (Patruno & Watts 2012) and can be interpreted in terms of the thermal emission from the stellar hotspot and reprocessing in the accretion column (e.g., Gierliński et al. 2002; Ibragimov & Poutanen 2009). The pulse arrival times of the 2018 outburst are well described by a timing model consisting of a circular orbit with a constant spin frequency. The pulse phases with respect to this model do not show spurious residuals with time or orbital phase, and no evidence is found that the pulse arrival times exhibit an additional delay associated with passing through the gravitational well of the companion star (Shapiro delay). We note, however, that the expected Shapiro delay is given as (Shapiro et al. 1971) Equation (5) where Φ is the orbital phase, G is the gravitational constant, c is the speed of light, and i is the inclination. Even for the maximum allowed companion mass, ${M}_{C}=0.030\,{M}_{\odot }$ (Krimm et al. 2007b, but see Section 4.2 for more details) and an inclination of 90°, the largest delay we can expect is only 4 μs. As this time-delay is smaller than the uncertainty on our phase residuals by nearly two orders of magnitude (see Figure 1), we are not sensitive to Shapiro delays in Swift J1756. Comparing our measurements for the 2018 outburst with those of the 2007 and 2009 outbursts as observed with RXTE, we analyzed the long-term evolution of this source. We found that the binary system is consistent with having a constant orbital period and that the pulsar shows a spin frequency derivative of $\dot{\nu }=-7.3\times {10}^{-16}\,\mathrm{Hz}\,{{\rm{s}}}^{-1}$. 4.1. Spin-down Evolution The long-term spin frequency derivative measured in Swift J1756 is of the same order as the spin frequency derivatives measured in other AMXPs (Hartman et al. 2008; Patruno 2010; Riggio et al. 2011). This frequency change is most likely driven by the neutron star's loss of rotational energy. If so, then the spin-down luminosity is given as Equation (6) where I represents the neutron star moment of inertia. The long-term spin-down of a neutron star is usually assumed to be dominated by the braking torque associated with a spinning magnetic field. Assuming this mechanism is responsible for the observed spin-down in Swift J1756, we can compute the magnetic dipole moment as (Spitkovsky 2006) Equation (7) where α is the misalignment angle between the rotational and magnetic poles. Considering α = 0°–90°, we then find a magnetic field strength of $B\simeq (4\mbox{--}6)\times {10}^{8}$ G at the stellar magnetic poles. This magnetic field strength estimate is in line with those obtained for other accreting millisecond pulsars (see Mukherjee et al. 2015 and references therein). 4.2. Orbit Evolution The observed long-term binary evolution of Swift J1756 is consistent with this source having a constant orbital period and a lower limit on the evolutionary timescale of Equation (8) Binary evolution theory predicts that systems of this type evolve due to angular momentum loss through gravitational radiation (Kraft et al. 1962; Rappaport et al. 1982; Verbunt 1993). For conservative mass transfer, the binary period derivative is given by di Salvo et al. (2008), Equation (9) where MNS is the neutron star mass, $q={M}_{C}/{M}_{\mathrm{NS}}$ is the binary mass ratio, and −1/3 < n < 1 is the mass–radius index of the companion star. Depending on the source inclination, Krimm et al. (2007b) derived a companion mass of ${M}_{C}\,=0.007\mbox{--}0.022\,{M}_{\odot }$ for a neutron star mass of 1.4 ${M}_{\odot }$. For a neutron star mass of 2.2 ${M}_{\odot }$, the allowed range increased to ${M}_{C}=0.009\mbox{--}0.030\,{M}_{\odot }$. In both cases, they assumed an upper limit on the inclination of i < 85°, motivated by the fact that Swift J1756 does not show eclipses in its light curve. Accounting for the extreme cases of stellar masses and n, the binary may either be contracting or expanding. In either case, however, the rate of change is limited to $| {\dot{P}}_{b}| \lesssim 7\times {10}^{-14}$ s s−1, which is well below the upper limit obtained in this work. Although the binary evolution timescale we obtain for Swift J1756 is consistent with theory, it is worth noting that this is not generally true for low-mass X-ray binaries (see Patruno et al. 2017, for a comprehensive discussion). The AMXP SAX J1808.4–3658, in particular, has been found to evolve on a much shorter timescale, with a first derivative on the orbital period of $3.5\times {10}^{-12}$ s s−1 (Hartman et al. 2008; Patruno et al. 2012; Sanna et al. 2017a). Two models have been proposed to explain this discrepancy: highly nonconservative mass transfer due to irradiation of the companion star by the pulsar (di Salvo et al. 2008; Burderi et al. 2009), and spin–orbit coupling in the companion star (Hartman et al. 2008, 2009). While the latter depends on the companion star, and may vary from source to source, the former should operate in all AMXPs (see also Patruno 2017; Sanna et al. 2017c), including Swift J1756. The spin-down luminosity impinging on the companion star can be estimated as Equation (10) where ${\dot{E}}_{\mathrm{abl}}$ is the ablation luminosity, RL2 is the Roche lobe radius of the companion (Eggleton 1983), and a the binary separation. The irradiation fraction is $f={\dot{E}}_{\mathrm{abl}}/{\dot{E}}_{\mathrm{sd}}$, which, accounting for the range of allowed neutron star and companion masses, evaluates to f = 0.15%–0.35%. The associated mass loss for the companion is given by Equation (11) such that, assuming an efficiency of η = 100%, ${\dot{M}}_{C}\,\sim -3\times {10}^{-10}\,{M}_{\odot }$ yr−1. The effect of this mass loss on the orbital period follows through the relation (Frank et al. 2002) Equation (12) giving a period derivative due to mass loss of ${\dot{P}}_{b,\mathrm{ML}}\,=5\times {10}^{-12}$ s s−1. This value is well above our limit on the period derivative. Hence, in order for this mechanism to be consistent with our observations of Swift J1756, the efficiency at which the companion star converts the incident luminosity into mass loss must be η < 15%. This value is very different from the 40% required in SAX J1808.4–3658 (Patruno et al. 2016) and is instead in line with the <5% efficiency determined for IGR J00291+5934 (Patruno 2017). This work was supported by NASA through the NICER mission and the Astrophysics Explorers Program, and made use of data and software provided by the High Energy Astrophysics Science Archive Research Center (HEASARC). P.B. was supported by an NPP fellowship at NASA Goddard Space Flight Center. D.A. acknowledges support from the Royal Society.

Bult, Peter

Discovery of a nearby radio relic in the low-mass, merging cluster Abell 4067

Shock waves generated during cluster mergers offer a powerful probe of how large-scale structure grows and evolves in the Universe. As part of the MeerKAT-South Pole Telescope (SPT) survey, we report the discovery of a single arc-like radio relic in the galaxy cluster Abell 4067 ($z=0.099$), one of the lowest-mass clusters known to host such a structure. MeerKAT UHF-band (0.58–1.09 GHz) observations reveal a relic with a largest linear size of $\sim 1.48\pm 0.02$ Mpc, located at a projected distance of 0.95 Mpc from the cluster centre. XMM–Newton X-ray data show that the relic’s position and orientation relative to the intracluster medium (ICM) elongation are consistent with a merger-driven shock-wave scenario. The relic has an estimated radio power of $3.10\pm 0.03\times 10^{24}$ W Hz$^{-1}$ at 150 MHz. When placed in the $P_{150\, \mathrm{MHz}}$–$M_{500}$ scaling relation, the Abell 4067 relic appears less luminous compared to relics in more massive clusters, suggesting an association with weak merger shocks. This finding supports the idea that relics in low-mass clusters may form through less energetic merger events, leading to weak merger shocks. The latter is supported by the absence of a detectable central radio halo in Abell 4067, which reinforces the idea that luminous radio haloes are not a universal outcome of cluster mergers and highlights the role of cluster mass, merger energetics, and evolutionary stage in shaping diffuse radio emission in the ICM.

79 ASTRONOMY AND ASTROPHYSICS

Unveiling the purely young star formation history of the SMC’s northeastern shell from colour–magnitude diagram fitting

ABSTRACT We obtain a quantitative star formation history (SFH) of a shell-like structure (‘shell’) located in the northeastern part of the Small Magellanic Cloud (SMC). We use the Survey of the MAgellanic Stellar History to derive colour–magnitude diagrams (CMDs), reaching below the oldest main-sequence turnoff, from which we compute the SFHs with CMD-fitting techniques. We present, for the first time, a novel technique that uses red clump (RC) stars from the CMDs to assess and account for the SMC’s line-of-sight depth effect present during the SFH derivation. We find that accounting for this effect recovers a more accurate SFH. We quantify an $\sim$7 kpc line-of-sight depth present in the CMDs, in good agreement with depth estimates from RC stars in the northeastern SMC. By isolating the stellar content of the northeastern shell and incorporating the line-of-sight depth into our calculations, we obtain an unprecedentedly detailed SFH. We find that the northeastern shell is primarily composed of stars younger than $\sim$500 Myr, with significant star formation enhancements around $\sim$250 and $\sim$450 Myr. These young stars are the main contributors to the shell’s structure. We show synchronicity between the northeastern shell’s SFH with the Large Magellanic Cloud’s (LMC) northern arm, which we attribute to the interaction history of the SMC with the LMC and the Milky Way (MW) over the past $\sim$500 Myr. Our results highlight the complex interplay of ram pressure stripping and the influence of the MW’s circumgalactic medium in shaping the SMC’s northeastern shell.

Sakowska, Joanna D. (ORCID:0000000215941466)

Statistical estimates of the binary properties of rotational variables

ABSTRACT We present a model to estimate the average primary masses, companion mass ranges, the inclination limit for recognizing a rotational variable, and the primary mass spreads for populations of binary stars. The model fits a population’s binary mass function distribution and allows for a probability that some mass functions are incorrectly estimated. Using tests with synthetic data, we assess the model’s sensitivity to each parameter, finding that we are most sensitive to the average primary mass and the minimum companion mass, with less sensitivity to the inclination limit and little to no sensitivity to the primary mass spread. We apply the model to five populations of binary spotted rotational variables identified in ASAS-SN, computing their binary mass functions using RV data from APOGEE. Their average primary mass estimates are consistent with our expectations based on their CMD locations ($\sim 0.75 \, {\rm M}_{\odot }$ for lower main sequence primaries and $\sim 0.9$–$1.2 \, {\rm M}_{\odot }$ for RS CVn and sub-subgiants). Their companion mass range estimates allow companion masses down to $M_2/M_1\simeq 0.1$, although the main sequence population may have a higher minimum mass fraction ($\sim 0.4$). We see weak evidence of an inclination limit $\gtrsim 50^{\circ }$ for the main sequence and sub-subgiant groups and no evidence of an inclination limit in the other groups. No groups show strong evidence for a preferred primary mass spread. We conclude by demonstrating that the approach will provide significantly better estimates of the primary mass and the minimum mass ratio and reasonable sensitivity to the inclination limit with 10 times as many systems.

Phillips, Anya (ORCID:000900051914974X)

Oxygen isotopes implanted in the LDEF spacecraft

Depth profiles of O-16 and O-18/O-16 were measured on stainless steel nuts and copper sheet (from a grounding strap) recovered from the leading edge of LDEF (Tray E10). The measurements were obtained by dynamic SIMS (secondary ion mass spectrometry) using a VG Isolab 54 ion microprobe. Plots of O-18/O-16 against time, show large depletions of up to a factor of 2 compared to the O-18/O-16 value at sea level. The O-16 current decreases by 2 orders of magnitude in the interior of the metal, and the corresponding profile of anomalous O-16 is strongly peaked in the outer few tens of nanometers of the surface. This depth scale is a tentative one based on estimated sputtering rates. Plots of O-18/O-16 against 1/O-16 should be linear if two isotopically distinct components, one of variable concentration (orbital component) and one of fixed concentration (normal oxygen), are mixed. Data to be presented at the meeting show departures from linearity which result from variability in the concentration of normal oxygen, but may also arise from the implantation of oxygen with a range of fractionation due to the decaying orbit of the LDEF, sputtering of the surface by atomic oxygen, and the different momenta of the two isotopes due to their equal velocities. The potential for using this method as a means of identifying exposure to low-Earth orbit, de-convoluting the effects of space exposure from terrestrial contamination, and using the implanted anomolous oxygen as a means of studying the atomic oxygen density and upper atmosphere temperature height profile will be discussed at the meeting.

Saxton, J. M.

Control Software for Piezo Stepping Actuators

A control system has been developed for the Space Interferometer Mission (SIM) piezo stepping actuator. Piezo stepping actuators are novel because they offer extreme dynamic range (centimeter stroke with nanometer resolution) with power, thermal, mass, and volume advantages over existing motorized actuation technology. These advantages come with the added benefit of greatly reduced complexity in the support electronics. The piezo stepping actuator consists of three fully redundant sets of piezoelectric transducers (PZTs), two sets of brake PZTs, and one set of extension PZTs. These PZTs are used to grasp and move a runner attached to the optic to be moved. By proper cycling of the two brake and extension PZTs, both forward and backward moves of the runner can be achieved. Each brake can be configured for either a power-on or power-off state. For SIM, the brakes and gate of the mechanism are configured in such a manner that, at the end of the step, the actuator is in a parked or power-off state. The control software uses asynchronous sampling of an optical encoder to monitor the position of the runner. These samples are timed to coincide with the end of the previous move, which may consist of a variable number of steps. This sampling technique linearizes the device by avoiding input saturation of the actuator and makes latencies of the plant vanish. The software also estimates, in real time, the scale factor of the device and a disturbance caused by cycling of the brakes. These estimates are used to actively cancel the brake disturbance. The control system also includes feedback and feedforward elements that regulate the position of the runner to a given reference position. Convergence time for smalland medium-sized reference positions (less than 200 microns) to within 10 nanometers can be achieved in under 10 seconds. Convergence times for large moves (greater than 1 millimeter) are limited by the step rate.

Shields, Joel F.

Measurement and Characterization of Helicopter Noise in Steady-State and Maneuvering Flight

A special acoustic flight test program was performed on the Bell 206B helicopter outfitted with an in-flight microphone boom/array attached to the helicopter while simultaneous acoustic measurements were made using a linear ground array of microphones arranged to be perpendicular to the flight path. Air and ground noise measurements were made in steady-state longitudinal and steady turning flight, and during selected dynamic maneuvers. Special instrumentation, including direct measurement of the helicopter s longitudinal tip-path-plane (TPP) angle, Differential Global Positioning System (DGPS) and Inertial Navigation Unit (INU) measurements, and a pursuit guidance display were used to measure important noise controlling parameters and to make the task of flying precise operating conditions and flight track easier for the pilot. Special care was also made to test only in very low winds. The resulting acoustic data is of relatively high quality and shows the value of carefully monitoring and controlling the helicopter s performance state. This paper has shown experimentally, that microphones close to the helicopter can be used to estimate the specific noise sources that radiate to the far field, if the microphones are positioned correctly relative to the noise source. Directivity patterns for steady, turning flight were also developed, for the first time, and connected to the turning performance of the helicopter. Some of the acoustic benefits of combining normally separated flight segments (i.e. an accelerated segment and a descending segment) were also demonstrated.

Schmitz, Fredric H.

A New Record Census of Dwarf AGN and a Bimodal $M_{\rm BH}$-$M_{\star}$ Scaling Relation with DESI DR1

Using the first spectroscopic data release from the Dark Energy Spectroscopic Instrument (DESI DR1), we search for AGN signatures in 1,678,787 low-redshift ($0.001 \le z \le 0.45$) line-emitting galaxies. Based on the [NII]-BPT emission-line ratio diagnostic, we identify AGN in 314,245/1,211,573 (25.9%) high-mass ($\log (M_{\star}/M_{\odot}) > 9.5$) and 9648/467,214 (2.1%) dwarf ($\log (M_{\star}/M_{\odot}) \le 9.5$) galaxies. Among these AGN, 17,949 are broad-line candidates (BL-AGN) with broad H$α$ emission, enabling black hole (BH) mass estimates using single-epoch virial methods. We find that the AGN fraction in line-emitting galaxies increases monotonically with stellar mass, rising from $\sim$1.4% at the low-mass end to $\sim$93.3% at the high-mass end. Using the large BL-AGN sample, we extend the $M_{\rm BH} - M_{\star}$ scaling relation down to $\log (M_{\star}/M_{\odot}) \approx 7.8$ and $\log (M_{\rm BH}/M_{\odot}) \approx 4.4$. In the context of high-redshift overmassive BHs, our results suggest that galaxies and their central BHs may follow two distinct evolutionary pathways across cosmic time. With this paper, we release the EmFit value-added catalog, containing emission-line flux and width measurements for $\sim$7.4 million galaxies, the largest catalog with emission-line decomposition into narrow, broad, and outflow components to date. This work significantly expands upon the early DESI results and provides a statistical sample for probing the galaxy$-$BH connection in the low-mass galaxy regime.

Pucha, Ragadeepika [Utah U.; Arizona U., Astron. D