Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

SEARCHING FOR MESONIC DARK MATTER WITH THE HEAVY PHOTON SEARCH EXPERIMENT

Several highly-sensitive astrophysical experiments over the past couple of decades have demonstrated that the current abundance of visible Standard Model matter cannot explain galactic rotation curves, the expansion history of the Universe, or the apparent warping of light in empty space. Instead, one finds strong agreement with this body of experimental results upon positing the existence of an invisible particulate field, dark matter. Namely, a cold, weakly interacting dark matter component can explain all these phenomena. A number of accelerator-based experiments have been developed to search for the weak couplings/interactions of these particles, many of them concentrating on particle models with masses of tens to thousands of GeV. A relatively new, well-motivated model is a dark sector coupled to the Standard Model via a dark photon. The current abundance of dark matter can be obtained if one assumes that dark matter is coupled to light by a MeV to GeV particle with a U(1) symmetry. The parameter space of these models remains largely unexplored because they are difficult to probe experimentally. In this thesis, I analyze data from the Heavy Photon Search (HPS) detector, whose two detector halves closely surround the electron beam, providing acceptance to far-forward boosted interactions. This forward acceptance to highly boosted particles yields unprecedented sensitivity to MeV-scale invariant masses. I exhaustively optimize the offline reconstruction of the HPS detector. Each reconstruction object, from Silicon Vertex Tracker hits to tracks, is studied to maximize acceptance of dark matter events. I then use the 2021 run data to search for one model of dark-photon-mediated matter, the Strongly Interacting Massive Particle (SIMP). SIMP models provide self-interacting dark matter candidates that can form bound states resembling dark mesons. HPS can detect SIMPs through the decay of a dark vector boson (either a dark ¿ or ¿) into e+e- pairs. I obtain exclusion contours for SIMPs using both an optimized cuts-based selection and a machine-learning-based selection, advancing our knowledge of the nature of dark matter.

O'Dwyer, Rory [Stanford Univ., CA (United States).↗

Supersonic flow computations over aerospace configurations using an Euler marching solver

For fully supersonic flows, an efficient strategy for obtaining numerical solutions is to employ space marching techniques. A full potential marching technique, known as the SIMP code and capable of handling such embedded subsonic regions, has achieved some success analyzing low supersonic Mach number flows. The extension of the full potential approach to the Euler equation which model the exact nonlinear inviscid gas dynamic flow processes is presented. Within the assumption of an inviscid flow, such an Euler marching solver can be applied to a wide class of shocked flows including the hypersonic range. The intent is to maintain some of the basic features of the full potential SIMP code within the Euler solver in dealing with geometry input, gridding techniques, and input/output routines including post processing of results. An Euler marching code known as EMTAC was developed. Results obtained for a variety of configurations involving canard, wing, horizontal tail, flow-through inlet, and fuselage using both the EMTAC and SIMP codes are reported. For shocked cases satisfying the isentropic assumption, the EMTAC and SIMP codes produced practically the same results. In terms of execution time, the EMTAC code is slower.

Szema, Kuo-Yen↗

Searching for Strongly-Interacting Dark Matter with the Heavy Photon Search Experiment

The Heavy Photon Search Experiment (HPS) is a fixed-target experiment at Jefferson Lab’s Hall B, designed to explore a hidden sector (HS) of particles containing dark matter and a new force mediator known as the “heavy photon” (A'). The A' is a massive spin-1 gauge boson associated with a new U (1)D symmetry in the HS that kinetically mixes with the Standard Model () photon with a weak coupling strength parameterized by ¿, with ¿2 ~ 10-2 -10-10. HPS utilizes a high-intensity electron beam on a thin tungsten target to produce heavy photons in the MeV-GeV mass range via “dark bremsstrahlung,” a process analogous to SM bremsstrahlung but suppressed by ¿2. The A' can decay resonantly to SM leptons, allowing HPS to conduct both mass resonance searches for prompt decays (large ¿) and displaced vertex searches for long-lived particles (small ¿). In addition to the minimal A' model, HPS probes more complex extensions such as the QCD-like strongly-interacting massive particles (SIMPs) HS containing “dark” pions (pD) and vector mesons (VD), with pD as dark matter candidates. These particles introduce new thermal dark matter freeze- out scenarios and visible signals through long-lived VD decays to SM leptons, which are accessible to HPS. This analysis conducted a displaced vertex search for VD ¿ e-e+ in the mass range 30 MeV to 124 MeV and ¿ between 10-6 < ¿ < 10-2 using data from the 2016 Engineering Run (10.753 nb-1) at 2.3 GeV. Unlike the minimal A' search, SIMP signal kinematics required new approaches to signal normalization and SM background rejection. The strongest signal evidence was a local p-value of 0.01317 for mVD = 119 MeV, corresponding to a global significance of 0.9s. Although no signal was found, this search excluded a region of the SIMP parameter space at 90 % confidence. This work demonstrates HPS’s competitive capability to probe SIMP sectors within cosmologically significant parameters and introduces a new method for HPS displaced vertex searches using track vertical impact parameter cuts

Spellman, Alic [Univ. of California, Santa Cruz, C↗

DISCOVERY OF TWO L AND T BINARIES WITH WIDE SEPARATIONS AND PECULIAR PHOTOMETRIC PROPERTIES

We present spatially resolved photometric and spectroscopic observations of two wide brown dwarf binaries uncovered by the Sondage Infrarouge de Mouvement Propre (SIMP) near-infrared proper motion survey. The first pair (SIMP J1619275+031350AB) has a separation of 0.''691 (15.2 AU) and components T2.5+T4.0, at the cooler end of the ill-understood J-band brightening. The system is unusual in that the earlier-type primary is bluer in J - K{sub s} than the later-type secondary, whereas the reverse is expected for binaries in the late-L to T dwarf range. This remarkable color reversal can possibly be explained by very different cloud properties between the two components. The second pair (SIMP J1501530-013506AB) consists of an L4.5+L5.5 (separation 0.''96, 30-47 AU) with a surprisingly large flux ratio ({Delta}J = 1.79 mag) considering the similar spectral types of its components. The large flux ratio could be explained if the primary is itself an equal-luminosity binary, which would make it one of the first known triple brown dwarf systems. Adaptive optics observations could not confirm this hypothesis, but it remains a likely one, which may be verified by high-resolution near-infrared spectroscopy. These two systems add to the handful of known brown dwarf binaries amenable to resolved spectroscopy without the aid of adaptive optics and constitute prime targets to test brown dwarf atmosphere models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of long-lived strongly interacting relic particles on big bang nucleosynthesis

It has been suggested that relic long-lived strongly interacting massive particles (SIMPs, or X particles) existed in the early universe. We study effects of such long-lived unstable SIMPs on big bang nucleosynthesis (BBN) assuming that such particles existed during the BBN epoch, but then decayed long before they could be detected. The interaction strength between an X particle and a nucleon is assumed to be similar to that between nucleons. We then calculate BBN in the presence of the unstable neutral charged X{sup 0} particles taking into account the capture of X{sup 0} particles by nuclei to form X nuclei. We also study the nuclear reactions and beta decays of X nuclei. We find that SIMPs form bound states with normal nuclei during a relatively early epoch of BBN. This leads to the production of heavy elements which remain attached to them. Constraints on the abundance of X{sup 0} particles during BBN are derived from observationally inferred limits on the primordial light element abundances. Particle models which predict long-lived colored particles with lifetimes longer than {approx}200 s are rejected based upon these constraints.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for strongly interacting massive particles generating trackless jets in proton–proton collisions at $\sqrt{s} = 13\,\text {TeV}$

A search for dark matter in the form of strongly interacting massive particles (SIMPs) using the CMS detector at the LHC is presented. The SIMPs would be produced in pairs that manifest themselves as pairs of jets without tracks. The energy fraction of jets carried by charged particles is used as a key discriminator to suppress efficiently the large multijet background, and the remaining background is estimated directly from data. The search is performed using proton–proton collision data corresponding to an integrated luminosity of 16.1 fb -1 , collected with the CMS detector in 2016. No significant excess of events is observed above the expected background. For the simplified dark matter model under consideration, SIMPs with masses up to 100 GeV are excluded and further sensitivity is explored towards higher masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Energy Evaluation of a New Construction Pilot Community: Fresno, California

A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes (WCHH) based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the House Simulation Protocols (Hendron, Robert; Engebrecht, Cheryn (2010). Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory). Builders face several key problems when implementing a whole-house systems integrated measures package (SIMP) from a single test house into multiple houses. Although a technical solution already may have been evaluated and validated in an individual test house, the potential exists for constructability failures at the community scale. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a SIMP and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Building America Case Study: Low-Cost Evaluation of Energy Savings at the Community Scale, Fresno, California (Fact Sheet)

A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes (WCHH) based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the House Simulation Protocols (Hendron, Robert; Engebrecht, Cheryn (2010). Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory.). Builders face several key problems when implementing a whole-house systems integrated measures package (SIMP) from a single test house into multiple houses. Although a technical solution already may have been evaluated and validated in an individual test house, the potential exists for constructability failures at the community scale. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a SIMP and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Destructions of {sup 7}Be and {sup 7}Li in Big Bang nucleosynthesis through reactions with exotic long-lived sub-strongly interacting massive particles

An observed plateau abundance of {sup 7}Li in metal-poor halo stars indicates its primordial origin. The {sup 7}Li abundances are about a factor of three smaller than that predicted in standard big bang nucleosynthesis (BBN) model. In addition, some of the stars possibly contain {sup 6}Li in abundances larger than standard BBN prediction. Particle models sometimes include heavy longlived colored particles which are confined in exotic strongly interacting massive particles (SIMPs). We have found reactions which destroy {sup 7}Be and {sup 7}Li during BBN in the scenario of BBN affected by a long-lived sub-strongly interactingmassive particle (sub-SIMP, X). The reactions are non radiative X captures of {sup 7}Be and {sup 7}Li which can operate if the X particle interacts with nuclei strongly enough to drive {sup 7}Be destruction but not strongly enough to form a bound state with {sup 4}He of relative angular momentum L = 1. The processes can be a cause of the {sup 7}Li problem. In this paper we suggest new possible reactions for {sup 6}Li production. Especially, a {sup 6}Li production through the deuteron capture of {sup 4}He bound to X can operate in the parameter region solving the {sup 7}Li problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Finding Matrix Product State Representations of Highly Excited Eigenstates of Many-Body Localized Hamiltonians

A key property of many-body localized Hamiltonians is the area law entanglement of even highly excited eigenstates. Matrix product states (MPS) can be used to efficiently represent low entanglement (area law) wave functions in one dimension. An important application of MPS is the widely used density matrix renormalization group (DMRG) algorithm for finding ground states of one-dimensional Hamiltonians. Here, we develop two algorithms, the shift-and-invert MPS (SIMPS) and excited state DMRG which find highly excited eigenstates of many-body localized Hamiltonians. Excited state DMRG uses a modified sweeping procedure to identify eigenstates, whereas SIMPS applies the inverse of the shifted Hamiltonian to a MPS multiple times to project out the targeted eigenstate. To demonstrate the power of these methods, we verify the breakdown of the eigenstate thermalization hypothesis in the many-body localized phase of the random field Heisenberg model, show the saturation of entanglement in the many-body localized phase, and generate local excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear Supersonic Full Potential Analysis

Supersonic Implicit Marching Program (SIMP) applies numerical method, based on conservative form of full potential equation, to problem of threedimensional supersonic flows with embedded subsonic regions. Conservative formulation of problem provides ability to capture shocks and to assess accurately impact of sweep, thickness, and lift for conditions where linear theory unsatisfactory. Technique uses characteristic signal-propagation theory to control density biasing for treatment of shocks (including embedded shocks) and mixed elliptic/hyperbolic crossflow. SIMP written in FORTRAN 77.

Shankar, V.↗

Software Aids Visualization Of Mars Pathfinder Mission

Report describes Simulator for Imager for Mars Pathfinder (SIMP) computer program. SIMP generates "virtual reality" display of view through video camera on Mars lander spacecraft of Mars Pathfinder mission, along with display of pertinent textual and graphical data, for use by scientific investigators in planning sequences of activities for mission.

Weidner, Richard J.↗

Combined Dimensional and Topology Optimization of Synchronous Machine Rotors Using a Material Density Interpolation Method

This article presents a magneto-structural combined dimensional and topology optimization technique for interior permanent magnet synchronous machine (IPMSM) and wound field synchronous machine (WFSM) rotors. Dimensional changes to the permanent magnet (PM) and rotor winding location or size are accomplished by interpolating or projecting a smoothed Heaviside rectangular function representing the presence of PM material onto the IPMSM rotor design domain mesh, whereas the presence of copper material for WFSM rotor is interpolated in the same manner. A density based Solid Isotropic Material with Penalization (SIMP) topology optimization approach is then used to vary the presence of electrical steel in mesh elements to form flux barriers around the PM. The proposed method enforces a defined shape for the PM without requiring the mesh in the design domain to be deformed. Four examples are presented to demonstrate the technique: Two flat bar IPMSM, one V-shaped IPMSM, and a WFSM. Here, a comparative study is performed on one of the flat bar IPMSMs using Metamodel of Optimal Prognosis (MOP) based method.

33 ADVANCED PROPULSION SYSTEMS↗

Build optimization of fiber-reinforced additively manufactured components

Additive manufacturing (AM) is enabling the fabrication of artifacts with unprecedented geometric and material complexity. The focus of this paper is on the build the optimization of short fiber reinforced polymers (SFRP) AM components. Specifically, we consider optimization of the build direction, topology, and fiber orientation of SFRP components. All three factors have a significant impact on the functional performance of the printed part. While significant progress has been made on optimizing these independently, the objective of this paper is to consider all three factors simultaneously and explore their interdependency, within the context of thermal applications. Towards this end, the underlying design parameters are identified, appropriate sensitivity equations are derived, and a formal optimization problem is posed as an extension to the popular Solid Isotropic Material with Penalization (SIMP). Results from several numerical experiments are presented, highlighting the impact of build direction, topology, and fiber orientation on the performance of SFRP components.

42 ENGINEERING↗

A dual mesh method with adaptivity for stress-constrained topology optimization

This paper is concerned with the topological optimization of elastic structures, with the goal of minimizing the compliance and/or mass of the structure, subject to a stress constraint. It is well known that depending upon the geometry and the loading conditions, the stress field can exhibit singularities, if these singularities are not adequately resolved, the topological optimization process will be ineffective. For computational efficiency, adaptive mesh refinement is required to adequately resolve the stress field. This poses a challenge for the traditional Solid Isotropic Material with Penalization (SIMP) method that employs a one-to-one correspondence between the finite element mesh and the optimization design variables because as the mesh is refined, the optimization process must somehow be re-started with a new set of design variables. The proposed solution here is a dual mesh approach, one finite element mesh defines the material distribution, a second finite element mesh is used for the computation of the displacement and stress fields. This allows for stress-based adaptive mesh refinement without modifying the definition of the optimization design variables. A second benefit of this dual mesh approach is that there is no need to apply a filter to the design variables to enforce a length scale, instead the length scale is determined by the design mesh. This reduces the number of design variables and allows the designer to apply spatially varying length scale if desired. The efficacy of this dual mesh approach is established via several stress-constrained topology optimization problems.

36 MATERIALS SCIENCE↗

Multiscale topology optimization using neural network surrogate models

In this study, we are concerned with optimization of macroscale elastic structures that are designed utilizing spatially varying microscale metamaterials. The macroscale optimization is accomplished using gradient-based nonlinear topological optimization. But instead of using density as the optimization decision variable, the decision variables are the multiple parameters that define the local microscale metamaterial. This is accomplished using single layer feedforward Gaussian basis function networks as a surrogate models of the elastic response of the microscale metamaterial. The surrogate models are trained using highly resolved continuum finite element simulations of the microscale metamaterials and hence are significantly more accurate than analytical models e.g. classical beam theory. Because the derivative of the surrogate model is important for sensitivity analysis of the macroscale topology optimization, a neural network training procedure based on the Sobolev norm is described. Since the SIMP method is not appropriate for spatially varying lattices, an alternative method is developed to enable creation of void regions. Lastly, the efficacy of this approach is demonstrated via several examples in which the optimal graded metamaterial outperforms a traditional solid structure.

42 ENGINEERING↗