SEARCH · Search NASA
Results for “STORAGE RINGS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Laser Assisted Emittance Transfer for Storage Ring Lasing
In modern storage rings the transverse emittance of electron beams can be comparable to that from state-of-art photoinjectors, but the intrinsic low peak current and large energy spread pre-cludes the possibility of realizing short-wavelength high-gain free electron lasers (FELs) in storage rings. In this note I propose a technique to significantly increase beam peak current without greatly increasing beam energy spread, which is achieved by transferring part of the longitudinal emittance to transverse plane. It is shown that by properly repartitioning the emittance in 6-D phase space, the beam from a large storage ring may be used to drive a single-pass high-gain FEL in soft x-ray wavelength range.
Comprehensive comparison of two tracking codes for single-particle dynamics evaluation of a next-generation storage ring light source
Next-generation light sources based on the multibend achromat concept place great reliance on the accuracy of beam dynamics modeling. To ensure the success of such light sources, confirmation of design performance with at least two independent codes is prudent. The APS Upgrade (APS-U) lattice has been designed using the code ELEGANT, which has existing and new features that are needed by the design. Corresponding, independent improvements have recently been made to the accelerator toolbox (AT), in order to permit an independent check of nonlinear dynamics predictions. The new developments include the modeling of combined-function bending magnets with straight geometry and improved fringe field effects of quadrupole magnets. Calculations of linear and nonlinear lattice parameters and particle tracking results were compared, showing remarkable agreement was found between the two independently developed codes. This provides significant confirmation of the feasibility of the APS-U design.
Storage Ring Current Monitor
The storage ring current monitor is expected to be utilized for the following functions: measurement of the current circulating in the storage ring; measurement of the beam lifetime; measurement of the injection efficiency; provide the level of the circulating current for the equipment protection system; provide amount of charge required for the next injection cycle in the top-up mode operation. The current will be monitored with a parametric current transformer (DCCT) integrated into the vacuum system of the storage ring. The electronic module will convert the current reading into the corresponding voltage which will be measured with a digital voltmeter (DVM). The digitized data will be processed by the control system.
Storage Ring Current Monitor
The storage ring current monitor is expected to be utilized for the following functions: - measurement of the current circulating in the storage ring; - measurement of the beam lifetime; - measurement of the injection efficiency; - provide the level of the circulating current for the equipment protection system; - provide amount of charge required for the next injection cycle in the top-up mode operation. The current will be monitored with a parametric current transformer (DCCT) integrated into the vacuum system of the storage ring. The electronic module will convert the current reading into the corresponding voltage which will be measured with a digital voltmeter (DVM). The digitized data will be processed by the control system.
An ergodic approach to polarization in eRHIC electron storage ring
Electron polarization in a storage ring is subject to two long term effects: Sokolov-Ternov polarization and depolarization by diffusion, which over a long time scale lead to an equilibrium state. Simulation-wise, this can be highly CPU time and memory consuming. Simulations aimed at determining optimal ring storage energy in an electron-ion collider use to track thousand particle bunches, for a long time - yet still short compared to depolarization time scales, due to HPC limitations. Based on considerations of ergodicity of electron bunch dynamics in the presence of synchrotron radiation, tracking a single particle instead is investigated. This allows substantial saving in teh required HPC volume, “CPU-time×Memory-allocation”. The concept is illustrated with polarization lifetime and equilibrium polarization simulations at the eRHIC electron-ion collider.
A possible approach to reduce the emittance of HLS-II storage ring using a Robinson wiggler
N/A
EQUILIBRIA AND SYNCHROTRON STABILITY IN TWO ENERGY STORAGE RINGS
In a dual energy storage ring, the electron beam passes through two loops at markedly different energies EL, and E_H, i.e., energies for low energy loop and high energy loop respectively. These loops use a common beamline where a superconducting linac at first accelerates the beam from EL to EH and then decelerates the beam from EH to EL in the next pass. There are two basic solutions to the equilibrium problems possible, i.e., ?Storage Ring? (SR) equilibrium and ?Energy Recovery Linac? (ERL) equilibrium. SR equilibrium mode more resembles the usual single loop storage ring with strong synchrotron motion and ERL equilibrium mode is the case where RF in two beam passes nearly cancels. Calculations based on linear transfer matrix formalism show that longitudinal stability exists for both SR mode and ERL mode in two energy storage rings.
An Inside Look: NSLS-II Storage Ring
Look inside the storage ring of the National Synchrotron Light Source II, under construction at Brookhaven Lab. Exactly 843 magnets now encircle the ring. Their job will be to steer, stabilize, and store electrons racing around at near light speed.
STRIPLINE KICKER DESIGN FOR NSLS2 STORAGE RING
In the NSLS2 storage ring, there are four stripline kickers/pickups. Two long striplines with electrode length of 30cm will be used as bunch-by-bunch transverse feedback actuators. Two short stripline kickers/pickups with 15cm length will mainly used for tune measurement excitation or signal pickup for the beam stability monitor. High shunt impedance of the long stripline kickers is demanded to produce 200 {micro}s damping time. Meanwhile the beam impedance should be minimized. The design work for these two types of stripline is discussed in this paper. NSLS2 is a third-generation light source under construction at Brookhaven National Laboratory. The machine will have < 1nm.rad horizontal emittance by using weak dipoles together with damping wigglers. For the storage ring of 792m circumference, geometric impedance, resistive wall impedance and ion effects are expected to be significant. A transverse bunch-by-bunch feedback system has been designed to suppress the coupled bunch instabilities. More information can be found in previous paper.
Bremsstrahlung dose rates during the conditioning of the superconducting RF cavities of the NSLS-II storage ring
NSLS-II storage ring currently operates with two single-cell Cornell Electron Storage Ring (CESR) type niobium cavities at 500 MHz with a Q value of 79,000 [1,2] both in one straight section in cell 24. During the maintenance period, the cavities have to be conditioned to be ready for operation. The cavities are source of bremsstrahlung radiation due to the field emission and multipacting processes.
ANALYSIS OF MULTIBUNCH SPECTRUM FOR AN UNEVEN BUNCH DISTRIBUTION IN A STORAGE RING
Modern storage-ring designs often require an uneven bunch distribution pattern. An uneven bunch fill pattern can result in complex structures for the beam current spectra. Particularly at high average beam currents, these complex current spectra need to be taken into account in concern of beam-dynamical effects. In this study, we analyze a beam current spectrum for various filling patterns with bunch trains and gaps. The characteristics of the resulting beam current spectra are illustrated and discussed.
Transverse Beam Tails and Beam Lifetime in the EIC Electron Storage Ring
For most storage ring design purposes it is sufficient to assume a Gaussian distribution of the electrons in a bunch. However, a more detailed knowledge of the population in the transverse tails beyond a few sigma is necessary to predict the beam lifetime and the synchrotron radiation load in the interaction region due to beam-gas scattering and the beam-beam interaction. This report presents simulations to determine the required vacuum level as well as to serve as input data for detailed synchrotron radiation simulations.
High-Field Combined-Function Magnets for a 1.5 x 1.5 TeV Muon Collider Storage Ring
A new storage ring lattice based on combined function high-field magnets and conceptual designs of superconducting magnets with dipole and quadrupole coils for a muon collider with a c.o.m. energy of 3 TeV and an average luminosity of 4x10^{34 } cm^{-2} s^{-1} are presented. Magnets are designed to provide the required focusing field gradient and bending field in the aperture with the appropriate operation margin. Magnets have large apertures to provide an adequate space for internal absorbers, vacuum insulation, beam pipe, and helium channel. Coil cross-sections were optimized to achieve the best possible field quality in the magnet aperture occupied with beams. Magnet parameters are reported and compared with the requirements. Energy depositi on calculations with the MARS code have allowed to optimize parameters of inner absorbers and collimators in interconnect regions, thus reducing peak power density and dynamic loads to the tolerable levels.
Reversible Seeding in Storage Rings
We propose to generate steady-state microbunching in a storage ring with a reversible seeding scheme. High gain harmonic generation (HGHG) and echo-enabled harmonic generation (EEHG) are two promising methods for microbunching linac electron beams. Because both schemes increase the energy spread of the seeded beam, they cannot drive a coherent radiator turn-by-turn in a storage ring. However, reversing the seeding process following the radiator minimizes the impact on the electron beam and may allow coherent radiation at or near the storage ring repetition rate. In this paper we describe the general idea and outline a proof-of-principle experiment. Electron storage rings can drive high average power light sources, and free-electron lasers (FELs) are now producing coherent light sources of unprecedented peak brightness While there is active research towards high repetition rate FELs (for example, using energy recovery linacs), at present there are still no convenient accelerator-based sources of high repetition rate, coherent radiation. As an alternative avenue, we recently proposed to establish steady-state microbunching (SSMB) in a storage ring. By maintaining steady-state coherent microbunching at one point in the storage ring, the beam generates coherent radiation at or close to the repetition rate of the storage ring. In this paper, we propose a method of generating a microbunched beam in a storage ring by using reversible versions of linac seeding schemes.
Dual-energy electron storage ring
A dual-energy electron storage ring is a novel concept initially proposed to cool hadron beams at high energies. The design consists of two closed rings operating at significantly different energies: the low-energy ring and the high-energy ring. These two rings are connected by an energy recovery linac (ERL) that provides the necessary energy difference. The ERL features superconducting radio-frequency (SRF) cavities that first accelerate the beam from the low energy E L to the high energy E H and then decelerate the beam from E H to E L in the next pass. The different SRF cavities in the ERL section can be adjusted based on the applications. In this paper, we present a possible layout of a dual-energy electron storage ring. The preliminary optics of the ring is designed to optimize chromaticity correction, dynamic aperture, momentum aperture, beam lifetime, radiation damping, and intrabeam scattering effects. The primary focus of this paper is on the stability conditions and beam dynamics studies associated with this storage ring. Published by the American Physical Society 2024
The KACST Heavy-Ion Electrostatic Storage Ring
A novel Electrostatic Storage Ring (ESR) for beams at energies up to 30keV/q is now being constructed at the National Centre for Mathematics and Physics (NCMP), King Abdul-Aziz City for Science and Technology (KACST). The ring is designed to be the core of a highly flexible experimental platform that will combine a large package of complementary beam techniques for atomic and molecular physics and related fields. The lattice design had to cover the different experimental techniques that the ring will be equipped with, such as e.g. Electron-Ion, Laser-Ion, Ion-Ion or Ion-Neutral beams, in both crossed and merged-beam configurations. The development of such an ESR is realized in a staged approach, in which a simple and early-run adaptation of the ring is built first, and then this basic version is upgraded to a higher symmetry of the ultimate version of the ring. Here, we report a general overview of this technical development with a focus on the layout of the first built stage of the ring.
Effects of CSR Generated from Upstream Bends in a Laser Plasma Storage Ring
The recent proposal of a Laser Plasma Storage Ring (LPSR) envisions the use of a laser-plasma (LP) acceleration module to inject an electron beam into a compact 500 MeV storage ring. Electron bunches generated by LP methods are naturally very short (tens of femtoseconds), presenting peak currents on the order of 10 kA or higher. Of obvious concern is the impact of collective effects and in particular Coherent Synchrotron Radiation (CSR) on the beam dynamics in the storage ring. Available simulation codes (e.g. Elegant) usually include transient CSR effects but neglect the contribution of radiation emitted from trailing magnets. In a compact storage ring, with dipole magnets close to each other, cross talking between different magnets could in principle be important.In this note we investigate this effect for the proposed LPSR and show that, in fact, this effect is relatively small. However our analysis also indicates that CSR effects in general would be quite strong and deserve a careful study.