Search NASA⌕ Search

SEARCH · Search NASA

Results for “STYRENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Synthesis of cobalt-containing mesoporous catalysts using the ultrasonic-assisted “pH-adjusting” method: Importance of cobalt species in styrene oxidation

Cobalt-containing SBA-15 and MCM-41 (Co-SBA-15 and Co-MCM-41) mesoporous catalysts were prepared via ultrasonic-assisted “pH-adjusting” technique in this study. Their physiochemical structures were comprehensively characterized and correlated with catalytic activity in oxidation of styrene. The nature of cobalt species depended on the type of mesoporous silica as well as pH values. The different catalytic performance between Co-SBA-15 and Co-MCM-41 catalysts originated from cobalt species. Cobalt species were homogenously incorporated into the siliceous framework of Co-SBA-15 in single-site Co(II) state, while Co{sub 3}O{sub 4} particles were loaded on Co-MCM-41 catalysts. The styrene oxidation tests showed that the single-site Co(II) state was more beneficial to the catalytic oxidation of styrene. The higher styrene conversion and benzaldehyde selectivity over Co-SBA-15 catalysts were mainly attributed to single-site Co(II) state incorporated into the framework of SBA-15. The highest conversion of styrene (34.7%) with benzaldehyde selectivity of 88.2% was obtained over Co-SBA-15 catalyst prepared at pH of 7.5, at the mole ratio of 1:1 (styrene to H{sub 2}O{sub 2}) at 70 °C. - Graphical abstract: Cobalt-containing mesoporous silica catalysts were developed via ultrasonic-assisted “pH-adjusting” technique. Compared with Co{sub 3}O{sub 4} in Co-MCM-41, the single-site Co(II) state in Co-SBA-15 was more efficient for the styrene oxidation. - Highlights: • Fast and cost-effective ultrasonic technique for preparing mesoporous materials. • Incorporation of Co via ultrasonic irradiation and “pH-adjusting”. • Physicochemical comparison between Co-SBA-15 and Co-MCM-41. • Correlation of styrene oxidation activity and catalyst structural property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Genome engineering of E. coli for improved styrene production and polymerization

Microbial production of exogenous organic compounds is challenging as biosynthetic pathways are often complex and produce metabolites that are toxic to the hosts. Biogenic styrene is an example of this problem, which if addressed could result in a more sustainable supply of this important component of the plastics industry. In this study, we engineered Escherichia coli for the production of styrene. We systematically optimized the production capability by first screening different pathway expression levels in E. coli strains. We then further designed and constructed a transcription regulator library targeting 54 genes with 85,420 mutations, and tested this library for increased styrene resistance and production. A series of tolerant mutants not only exhibited improved styrene tolerance but also produced higher styrene concentrations compared to the parent strain. The best producing mutant, ST05 LexA_E45I, produced a 3.45-fold increase in styrene compared to the parent strain. The produced styrene was extracted via gas stripping into dodecane and used in a direct free radical synthesis of polystyrene.

09 BIOMASS FUELS↗

Cell-free styrene biosynthesis at high titers

Styrene is an important petroleum-derived molecule that is polymerized to make versatile plastics, including disposable silverware and foamed packaging materials. Finding more sustainable methods, such as biosynthesis, for producing styrene is essential due to the increasing severity of climate change as well as the limited supply of fossil fuels. Recent metabolic engineering efforts have enabled the biological production of styrene in Escherichia coli, but styrene toxicity and volatility limit biosynthesis in cells. To address these limitations, we have developed a cell-free styrene biosynthesis platform. The cell-free system provides an open reaction environment without cell viability constraints, which allows exquisite control over reaction conditions and greater carbon flux toward product formation rather than cell growth. The two biosynthetic enzymes required for styrene production were generated via cell-free protein synthesis and mixed in defined ratios with supplemented L-phenylalanine and buffer. By altering the time, temperature, pH, and enzyme concentrations in the reaction, this approach increased the cell-free titer of styrene from 5.36 ± 0.63 mM to 40.33 ± 1.03 mM, the highest amount achieved using biosynthesis without process modifications and product removal strategies. Finally, cell-free systems offer a complimentary approach to cellular synthesis of small molecules, which can provide particular benefits for producing toxic molecules.

59 BASIC BIOLOGICAL SCIENCES↗

Structure and Ligand Binding Properties of the Epoxidase Component of Styrene Monooxygenase

Styrene monooxygenase (SMO) is a two-component flavoprotein monooxygenase that transforms styrene to styrene oxide in the first step of the styrene catabolic and detoxification pathway of Pseudomonas putida S12. The crystal structure of the N-terminally histidine-tagged epoxidase component of this system, NSMOA, determined to 2.3 {angstrom} resolution, indicates the enzyme exists as a homodimer in which each monomer forms two distinct domains. The overall architecture is most similar to that of p-hydroxybenzoate hydroxylase (PHBH), although there are some significant differences in secondary structure. Structural comparisons suggest that a large cavity open to the surface forms the FAD binding site. At the base of this pocket is another cavity that likely represents the styrene binding site. Flavin binding and redox equilibria are tightly coupled such that reduced FAD binds apo NSMOA {approx}8000 times more tightly than the oxidized coenzyme. Equilibrium fluorescence and isothermal titration calorimetry data using benzene as a substrate analogue indicate that the oxidized flavin and substrate analogue binding equilibria of NSMOA are linked such that the binding affinity of each is increased by 60-fold when the enzyme is saturated with the other. A much weaker {approx}2-fold positive cooperative interaction is observed for the linked binding equilibria of benzene and reduced FAD. The low affinity of the substrate analogue for the reduced FAD complex of NSMOA is consistent with a preferred reaction order in which flavin reduction and reaction with oxygen precede the binding of styrene, identifying the apoenzyme structure as the key catalytic resting state of NSMOA poised to bind reduced FAD and initiate the oxygen reaction.

36 MATERIALS SCIENCE↗

Quantum chemical analysis of mechanisms of phenylacetylene and styrene hydrogenation to ethylbenzene on the Pd{111} surface

The mechanisms of the hydrogenation of phenylacetylene and styrene to ethylbenzene on the Pd{111} surface, which are secondary reactions of the selective hydrogenation of phenylacetylene, were studied by the DFT-PBE method. The position of the Ph group of the styrene molecule with respect to the Pd surface is shown to exert a noticeable effect on the mechanism of the process. If the Ph group is adsorbed on the Pd surface, then the addition of the first H atom to the terminal C atom of the styrene molecule is most probable. If Ph does not contact the surface, then the most substituted C atom of the styrene molecule is first hydrogenated. On the whole, the interaction of the Ph group with the Pd{111} surface results in stable adsorption structures, the hydrogenation of which on the Pd{111} surface is strongly hindered. The Gibbs activation energy (ΔG{sup ≠}{sub 298}) is 22.9 and 27.1 kcal mol{sup –1} in the most probable reaction routes of styrene hydrogenation to ethylbenzene and direct hydrogenation of phenylacetylene to ethylbenzene, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improvement of catalytic activity in selective oxidation of styrene with H{sub 2}O{sub 2} over spinel Mg–Cu ferrite hollow spheres in water

Graphical abstract: Uniform spinel Mg–Cu ferrite hollow spheres were prepared using carbon spheres as templates. Solid spinel Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} ferrite nanocrystals were also prepared by sol–gel auto-combustion, hydrothermal and coprecipitation methods for comparison. The samples were found to be efficient catalysts for oxidation of styrene using hydrogen peroxide as oxidant. Especially, in the case of Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} hollow spheres, obvious improvement on catalytic activity was observed and 21.2% of styrene conversion and 75.2% of selectivity for benzaldehyde were obtained at 80 °C for 6 h reaction in water. The catalyst can be magnetically separated easily for reuse and no obvious loss of activity was observed when reused in six consecutive runs. - Highlights: • Uniform spinel ferrite hollow spheres were prepared by a simple method. • The catalyst has been proved much more efficient for styrene oxidation than the reported analogues. • The catalyst can be easily separated by external magnetic field and has exhibited excellent reusability. • The catalytic system is environmentally friendly. - Abstract: Uniform spinel Mg–Cu ferrite hollow spheres were prepared using carbon spheres as templates. For comparison, solid Mg–Cu ferrite nanocrystals were also prepared by sol–gel auto-combustion, hydrothermal and coprecipitation methods. All the samples were characterized by Fourier transform infrared spectrophotometry (FT-IR), X-ray diffractometry (XRD), transmission electron microscopy (TEM) and N{sub 2} physisorption. The samples were found to be efficient catalysts for oxidation of styrene using hydrogen peroxide as oxidant. Especially, in the case of Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} hollow spheres, obvious improvement on catalytic activity was observed, and 21.2% of styrene conversion and 75.2% of selectivity for benzaldehyde were obtained at 80 °C for 6 h reaction in water. The catalyst can be magnetically separated easily for reuse and no obvious loss of activity was observed when reused in six consecutive runs.

36 MATERIALS SCIENCE↗

Addition of one and two units of C{sub 2}H to styrene: A theoretical study of the C{sub 10}H{sub 9} and C{sub 12}H{sub 9} systems and implications toward growth of polycyclic aromatic hydrocarbons at low temperatures

Various mechanisms of the formation of naphthalene and its substituted derivatives have been investigated by ab initio G3(MP2,CC)/B3LYP/6-311G** calculations of potential energy surfaces for the reactions of one and two C{sub 2}H additions to styrene combined with RRKM calculations of product branching ratios under single-collision conditions. The results show that for the C{sub 2}H + styrene reaction, the dominant routes are H atom eliminations from the initial adducts; C{sub 2}H addition to the vinyl side chain of styrene is predicted to produce trans or cis conformations of phenylvinylacetylene (t- and c-PVA), whereas C{sub 2}H addition to the ortho carbon in the ring is expected to lead to the formation of o-ethynylstyrene. Although various reaction channels may lead to a second ring closure and the formation of naphthalene, they are not competitive with the direct H loss channels producing PVAs and ethynylstyrenes. However, c-PVA and o-ethynylstyrene may undergo a second addition of the ethynyl radical to ultimately produce substituted naphthalene derivatives. {alpha}- and {beta}-additions of C{sub 2}H to the side chain in c-PVA are calculated to form 2-ethynyl-naphthalene with branching ratios of about 30% and 96%, respectively; the major product in the case of {alpha}-addition would be cis-1-hexene-3,5-diynyl-benzene produced by an immediate H elimination from the initial adduct. C{sub 2}H addition to the ethynyl side chain in o-ethynylstyrene is predicted to lead to the formation of 1-ethynyl-naphthalene as the dominant product. The C{sub 2}H + styrene {yields}t-PVA+ H/c-PVA+ H/o-ethynylstyrene, C{sub 2}H +c-PVA{yields} 2-ethynyl-naphthalene + H, and C{sub 2}H +o-ethynylstyrene {yields} 1-ethynyl-naphthalene + H reactions are calculated to occur without a barrier and with high exothermicity, with all intermediates, transition states, and products lying significantly lower in energy than the initial reactants, and hence to be fast even at very low temperature conditions prevailing in Titan's atmosphere or in the interstellar medium. If styrene and C{sub 2}H are available and overlap, the sequence of two C{sub 2}H additions can result in the closure of a second aromatic ring and thus provide a viable route to the formation of 1- or 2-ethynyl-naphthalene. The analogous mechanism can be extrapolated to the low-temperature growth of polycyclic aromatic hydrocarbons (PAH) in general, as a step from a vinyl-PAH to an ethynyl-substituted PAH with an extra aromatic ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electroless preparation and characterization of Ni-B nanoparticles supported on multi-walled carbon nanotubes and their catalytic activity towards hydrogenation of styrene

Graphical abstract: The MWCNT/Ni-B catalyst has been successfully prepared by an electroless deposition process. The Ni-B nanoparticles on the supporter are amorphous and are well-distributed. The catalytic conversion towards hydrogenation of styrene shows excellent catalytic activity of the obtained materials. Highlights: Black-Right-Pointing-Pointer A two-step treatment of MWCNTs enabled the homogeneous growth of Ni-B nanoparticles. Black-Right-Pointing-Pointer Ni-B nanoparticles were amorphous with an average size of 60 nm. Black-Right-Pointing-Pointer There were electron transfer between Ni and B. Black-Right-Pointing-Pointer The catalyst had excellent catalytic activity towards hydrogenation of styrene. -- Abstract: Nickel-boron (Ni-B) nanoparticles supported on multi-walled carbon nanotubes (MWCNTs) were successfully synthesized through an electroless deposition process using the plating bath with sodium borohydride as a reducing agent. The structural and morphological analyses using field-emission scanning electron microscopy, X-ray diffractometry and high-resolution transmission electron microscopy have shown that the Ni-B nanoparticles deposited on the sidewalls of MWCNTs are fine spheres comprised of amorphous structure with the morphologically unique fine-structure like flowers, and homogenously dispersed with a narrow particle size distribution centered at around 60 nm diameter. The catalytic activity of MWCNT/Ni-B nanoparticles was evaluated with respect to hydrogenation of styrene. The hydrogenation catalyzed by MWCNT-supported Ni-B nanoparticles has been found to make styrene selectively converted into ethylbenzene. The highest conversion reaches 99.8% under proper reaction conditions, which demonstrates the high catalytic activity of MWCNT/Ni-B nanoparticles.

36 MATERIALS SCIENCE↗

The role of CO 2 as a soft oxidant for dehydrogenation of ethylbenzene to styrene over a high-surface-area ceria catalyst

Catalytic performance and the nature of surface adsorbates were investigated for high-surface-area ceria during ethylbenzene oxidative dehydrogenation (ODH) reaction using CO2 as a soft oxidant. A template assisted method was used to synthesize the high-surface-area ceria. The interactions between ethylbenzene, styrene and CO2 on the surface of ceria and the role of CO2 for the ethylbenzene ODH reaction have been investigated in detail by using activity test, in situ Diffuse Reflectance Infrared and Raman spectroscopy. Not only did CO2 as an oxidant favor the higher yield of styrene, but it also inhibited the deposition of coke during the ethylbenzene ODH reaction. Ethylbenzene ODH reaction over ceria followed a two-step pathway: Ethylbenzene is first dehydrogenated to styrene with H2 formed simultaneously, and then CO2 reacts with H2 via the reverse water gas shift. The styrene produced can easily polymerize to form polystyrene, a key intermediate for coke formation. In the absence of CO2, the polystyrene transforms into graphite-like coke at temperatures above 500 °C, which leads to catalyst deactivation. While in the presence of CO2, the coke deposition can be effectively removed via oxidation with CO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient and selective pressure-assisted photon-induced polymerization of styrene

The polymerization process of condensed styrene to produce polystyrene as an industrially important polymeric material was investigated using a novel approach by combining external compression with ultraviolet radiation. The reaction evolution was monitored as a function of time and the reaction products were characterized by in situ Fourier transform infrared spectroscopy. By optimizing the loading pressures, we observed highly efficient and selective production of polystyrene of different tacticities. Specifically, at relatively low loading pressures, infrared spectra suggest that styrene monomers transform to amorphous atactic polystyrene (APS) with minor crystalline isotactic polystyrene. In contrast, APS was found to be the sole product when polymerization occurs at relatively higher loading pressures. The time-dependent reaction profiles allow the examination of the polymerization kinetics by analyzing the rate constant and activation volume as a function of pressure. As a result, an optimized pressure condition, which allows a barrierless reaction to proceed, was identified and attributed to the very desirable reaction yield and kinetics. Finally, the photoinitiated reaction mechanism and the growth geometry of the polymer chains were investigated from the energy diagram of styrene and by the topology analysis of the crystal styrene. This study shows strong promise to produce functional polymeric materials in a highly efficient and controlled manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of Cr-MSU-1 and its catalytic application for oxidation of styrene

Chromium-containing mesoporous silica material Cr-MSU-1 was synthesized using lauryl alcohol-polyoxyethylene (23) ether as templating agent under the neutral pH condition by two-step method. The sample was characterized by XRD, TEM, FT-IR, UV-Vis, ESR, ICP-AES and N{sub 2} adsorption. Its catalytic performance for oxidation of styrene was studied. Effects of the solvent used, the styrene/H{sub 2}O{sub 2} mole ratio and the reaction temperature and time on the oxidation of styrene over the Cr-MSU-1 catalyst were examined. The results indicate that Cr ions have been successfully incorporated into the framework of MSU-1 and the Cr-MSU-1 material has a uniform worm-like holes mesoporous structure. After Cr-MSU-1 is calcined, most of Cr{sup 3+} is oxidized to Cr{sup 5+} and Cr{sup 6+} in tetrahedral coordination and no extra-framework Cr{sub 2}O{sub 3} is formed. The Cr-MSU-1 catalyst is highly active for the selective oxidation of styrene and the main reaction products over Cr-MSU-1 are benzaldehyde and phenylacetaldehyde. Its catalytic performance remains stable within five repeated runs and no leaching is noticed for this chromium-based catalyst. - Graphical abstract: Mesoporous Cr-MSU-1 with worm-like holes was synthesized by a novel two-step method. The Cr-MSU-1 material is highly active and stable for the selective oxidation of styrene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-step synthesis of 2,3-difluoronaphthalene by the gas-phase co-pyrolysis of styrene with chlorodifluoromethane

The gas-phase co-pyrolysis of styrene with CHClF{sub 2} in a flow reactor at 550–650 °C gives 2,3-difluoronaphthalene in two parallel reaction channels. The main channel includes decomposition of CHClF{sub 2} to difluorocarbene, whose subsequent cycloaddition to styrene affords 1,1-difluoro-2-phenylcyclopropane. This compound rearranges to 2-fluoroindene giving finally difluoronaphthalene upon the second difluorocarbene cycloaddition and subsequent aromatization of the resulting cycloadduct. The second reaction channel consists in aromatization of 1,1,2,2-tetrafluoro-3-phenylcyclobutane, which is formed by the [2+2]-cycloaddition of styrene to tetrafluoroethylene, a product of difluorocarbene dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel organic polymer-inorganic hybrid material zinc poly(styrene-phenylvinylphosphonate)-phosphate prepared with a simple method

A novel type of organic polymer-inorganic hybrid material layered crystalline zinc poly(styrene-phenylvinylphosphonate)-phosphate (ZnPS-PVPP) was synthesized under mild conditions in the absence of any template. And the ZnPS-PVPP were characterized by FT-IR, diffusion reflection UV-vis, AAS, N{sub 2} volumetric adsorption, SEM, TEM and TG. Notably, this method was entirely different from the traditional means used for preparing other zinc phosphonate. Moreover, it could be deduced that ZnPS-PVPP possessed the potential applications for catalyst supports. In the initial catalytic tests, the catalysts immobilized onto ZnPS-PVPP showed comparable or higher activity and enantioselectivity with that of catalysts reported by our group in the asymmetric epoxidation of unfunctional olefins. - Graphical Abstract: Zinc poly(styrene-phenylvinylphosphonate)-phosphate was a novel type of layered crystalline organic polymer-inorganic hybrid material prepared under mild conditions without addition of any template and could be used as heterogeneous catalyst supports. Highlights: > New types of layered crystalline inorganic-organic polymer hybrid materials zinc poly(styrene-phenylvinylphosphonate-phosphate(ZnPS-PVPP)). > ZnPS-PVPP prepared under mild condition without adding of any template. > Immobilized chiral salen Mn (III) catalysts on ZnPS-PVPP supports show comparative activity and enantioselectivity with that of on ZSPP or ZPS-PVPA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of reaction conditions in selective oxidation of styrene over fine crystallite spinel-type CaFe{sub 2}O{sub 4} complex oxide catalyst

The CaFe{sub 2}O{sub 4} spinel-type catalyst was synthesized by citrate gel method and well characterized by thermogravimetric analysis, atomic absorption spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and transmission electron microscopy. The crystallization temperature of the spinel particle prepared by citrate gel method was 600 {sup o}C which was lower than that of ferrite prepared by other methods. CaFe{sub 2}O{sub 4} catalysts prepared by citrate gel method show better activity for styrene oxidation in the presence of dilute H{sub 2}O{sub 2} (30%) as an oxidizing agent. In this reaction the oxidative cleavage of carbon-carbon double bond of styrene takes place selectively with 38 {+-} 2 mol% conversion. The major product of the reaction is benzaldehyde up to 91 {+-} 2 mol% and minor product phenyl acetaldehyde up to 9 {+-} 2 mol%, respectively. The products obtained in the styrene oxidation reaction were analyzed by gas chromatography and mass spectroscopy. The influence of the catalyst, reaction time, temperature, amount of catalyst, styrene/H{sub 2}O{sub 2} molar ratio and solvents on the conversion and product distribution were studied.

36 MATERIALS SCIENCE↗

Polybutadiene and Styrene-Butadiene rubbers for high-dose dosimetry

Polybutadiene and Styrene-Butadiene are synthetical rubbers used widely for pneumatic tires manufacturing. In this research, the dosimeter characteristics of those rubbers were studied for application in high-dose dosimetry. The rubber samples were irradiated with doses of 10 Gy up to 10 kGy, using a {sup 60}Co Gamma Cell-220 system (dose rate of 1.089 kGy/h) and their readings were taken on a Fourier Transform Infrared Spectroscopy-FTIR system (model Frontier/Perkin Elmer). The ratios of two absorbance peaks were taken for each kind of rubber spectrum, Polybutadiene (1306/1130 cm{sup -1}) and Styrene-Butadiene (1449/1306 cm{sup -1}). The ratio calculated was used as the response to the irradiation, and is not uniform across the sample. From the results, it can be concluded for both rubbers: a) the dose-response curves may be useful for high-dose dosimetry (greater than 250 Gy); b) their response for reproducibility presented standard deviations lower than 2.5%; c) the relative sensitivity was higher for Styrene-Butadiene (1.86 kGy{sup -1}) than for Polybutadiene (1.81 kGy{sup -1}), d) for doses of 10 kGy to 200 kGy, there was no variation in the dosimetric response. Both types of rubber samples showed usefulness as high-dose dosimeters. (authors)

36 MATERIALS SCIENCE↗

Chemically Stable Styrenic Electrospun Membranes with Tailorable Surface Chemistry

Membranes with tailorable surface chemistry have applications in a wide range of industries. Synthesizing membranes from poly(chloromethyl styrene) directly incorporates an alkyl halide surface-bound initiator which can be used to install functional groups via SN2 chemistry or graft polymerization techniques. In this work, poly(chloromethyl styrene) membranes were synthesized through electrospinning. After fabrication, membranes were crosslinked with a diamine, and the chemical resistance of the membranes was evaluated by exposure to 10 M nitric acid, ethanol, or tetrahydrofuran for 24 h. The resulting membranes had diameters on the order of 2–5 microns, porosities of >80%, and permeance on the order of 10,000 L/m2/h/bar. Crosslinking the membranes generally increased the chemical stability. The degree of crosslinking was approximated using elemental analysis for nitrogen and ranged from 0.5 to 0.9 N%. The poly(chloromethyl styrene) membrane with the highest degree of crosslinking did not dissolve in THF after 24 h and retained its high permeance after solvent exposure. The presented chemically resistant membranes can serve as a platform technology due to their versatile surface chemistry and can be used in membrane manufacturing techniques that require the membrane to be contacted with organic solvents or monomers. They can also serve as a platform for separations that are performed in strong acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal-organic framework based on copper(I) sulfate and 4,4{sup '}-bipyridine catalyzes the cyclopropanation of styrene

The hydrothermal synthesis of a new metal-organic framework (MOF) formulated as Cu{sub 2}(4,4'-bpy){sub 2}SO{sub 4}.6(H{sub 2}O), [abbreviation: (1); bpy or 4,4'-bpy=4,4'-bipyridine; SO{sub 4}{sup 2-}=sulfate group] has been reported. The structure of this MOF consists of Cu{sup +} nodes connected via 4,4'-bpy to form infinite chains, with two neighboring chains further bridged on the nodes by SO{sub 4}{sup 2-}, resulting in a 1-D double chain network. Guest water molecules reside in between the chains and are hydrogen-bonded to the O and S atoms from the nearest sulfate groups, leading to the formation of a 3-D supramolecular framework. This MOF is good heterogeneous catalyst for the cyclopropanation of styrene, with high trans cyclopropane diastereoselectivity and was recycled and reused for three consecutive cycles without a significant loss of catalytic activity. - Graphical Abstract: A new MOF structure built up of 4,4{sup '}-bipyridine, sulphate and Cu(I), is an active heterogeneous catalyst for cyclopropanation of styrene with ethyldiazoacetate. Highlights: > The synthesis is different from solvothermal synthesis for other Cu(I) compounds. > The compound and the structure are new. > H bonds form infinite planes among water molecules and sulphate species. > H bonding interaction makes the structure into a 3D supramolecular framework. > Active catalytic property as heterogeneous catalyst for cyclopropanation of styrene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of styrene maleic acid alternating copolymer supramolecular assemblies in solution by small angle X-ray scattering

Over the past decade, Styrene Maleic Acid alternating copolymers (SMA) have gained interest as an alternative to detergent solubilization for the isolation of integral membrane proteins. The formation of SMA lipid particles (SMALPs) presents a novel opportunity to isolate the proximal membrane environment, encompassing and throughout membrane proteins in vitro. Neither the organization or structure of SMAs in an aqueous buffer nor the mechanism by which SMA transforms the membrane bilayer into a SMALP is known. This study investigates the shape and size of diverse SMA polymer complexes/aggregates in solution at various pH, ionic strength, SMA concentration and temperature, analyzed by small angle X-ray scattering. It is clear that SMAs of differing physicochemical properties (styrene to maleic acid ratio, length of copolymer fragments and functionalization) display highly variable sizes/shapes in solution over a range of environmental conditions. The SMA supramolecular aggregates exhibit similar prolate ellipsoidal geometry of varying size, dependent on the degree of hydrophobicity of the SMA copolymer. At elevated temperature, particles composed of SMAs enriched in styrene increase in both radius of gyration and maximum particle diameter. Interestingly, we observe a correlation between the SMALP dimensions and that of native membranes. Future work will investigate if there may be a complimentary relationship between SMA aggregate dimensions and bilayer thickness (and/or protein transmembrane domain thickness), similar to what has been observed for tandem facial amphiphiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗