Search NASA⌕ Search

SEARCH · Search NASA

Results for “Safety factor gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

35 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries

All-solid-state Li–sulfur batteries (ASSLSBs) are considered promising candidates for next-generation energy storage owing to their inherent safety, high energy density, and abundant sulfur resources. However, slow redox kinetics greatly limit sulfur utilization during solid-solid sulfur reactions, leading to significant challenges to achieve efficient performance in high-mass-loading ASSLSBs. Here, operando neutron image is employed to directly visualize, for the first time, that sluggish Li + transport kinetics and the uneven distribution of Li + during cathodic reactions are critical factors limiting sulfur conversion. To address this issue, gradient cathode architectures comprising three and five layers are designed, in which catholyte concentrations are strategically varied to optimize Li-ion flux and enhance ionic conductivity of the whole composite cathode electrode. Operando neutron imaging distinctly visualizes and confirms that three-layer gradient approach significantly enhances Li-ion mobility, resulting in more uniform redox reactions and greatly improved sulfur utilization compared to traditional non-gradient structures. Consequently, the three-layer gradient cathode achieves superior rate performance and reduced electrode polarization at high sulfur mass loadings of 4.5 and 6.0 mg cm −2 . Furthermore, the applicability and scalability of this design are demonstrated in a five-layer gradient cathode architecture, achieving an impressive discharge specific capacity increase from 656 mAh g −1 (three-layer gradient) to 1232 mAh g −1 at 1/20 C for ultra-high sulfur loading of 7.5 mg cm −2 . In conclusion, this innovative gradient cathode design offers substantial advancements in understanding and overcoming Li-ion transport limitations, paving the way toward practical, high-energy-density ASSLSBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Empirical probability and machine learning analysis of m , n = 2, 1 tearing mode onset parameter dependence in DIII-D H-mode scenarios

m, n = 2, 1 tearing mode onset empirical probability and machine learning analyses of a multiscenario DIII-D database of over 14 000 H-mode discharges show that the normalized plasma beta, the rotation profile, and the magnetic equilibrium shape have the strongest impact on the 2,1 tearing mode stability, in qualitative agreement with neoclassical tearing modes (m and n are the poloidal and toroidal mode numbers, respectively). In addition, 2,1 tearing modes are most likely to destabilize when n > 1 tearing modes are already present in the core plasma. The covariance matrix of tearing sensitive plasma parameters takes a nearly block-diagonal form, with the blocks incorporating thermodynamic, current and safety factor profile, separatrix shape, and plasma flow parameters, respectively. This suggests a number of paths to improved stability at fixed pressure and edge safety factor primarily by preserving a minimum of 1 kHz differential rotation, increasing the minimum safety factor above unity, using upper single null magnetic configuration, and reducing the core impurity radiation. In addition, lower triangularity, lower elongation, and lower pedestal pressure may also help to improve stability. Furthermore, the electron and ion temperature, collisionality, resistivity, internal inductance, and the parallel current gradient appear to only weakly correlate with the 2,1 tearing mode onsets in this database.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Linear simulation of kinetic electromagnetic instabilities in a tokamak plasma with weak magnetic shear

Gyrokinetic simulation and eigenvalue calculation of electromagnetic instabilities are carried out for an experimentally observed low-n mode in weak magnetic shear discharge. With different magnetic shear values, the Gyrokinetic Toroidal Code simulation of the ion temperature gradient mode is consistent with the eigenvalue code (HD7) calculation. Due to the sensitivity of the kinetic ballooning mode (KBM) to global equilibrium, the simulation of the KBM deviates from the eigenvalue results, for the ballooning representation used in HD7 satisfies its spatial scale separations. Under a flat safety factor profile, the KBM is more unstable and its mode structure tends to move with the peak of the ion temperature drive. Further simulation of the KBM in an HL-2A-like equilibrium shows that the β excitation threshold of the mode is lower than 0.2% and the dominant toroidal mode number is n = 4, which is consistent with the measured experimental spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

VTO_2021_APR_LLNL_Ye

Traditional batteries are composed of two-dimensional films that are stacked and/or rolled. Thin film batteries display high power density while their thick film counterparts show good energy density, but it has proven difficult to concurrently achieve both within these planar form factors. In addition, conventional Li-ion batteries based on liquid organic electrolytes or gel polymer electrolytes have raised severe safety concerns due to the intrinsic flammable properties of the organic electrolytes. They are also not ideal for the use of high energy density metallic lithium (Li) anodes due to Li dendrite growth, or sulfur cathodes due to shuttling effects that result in fast capacity fade. There is an urgent need to develop safe, high-performance solid-state batteries (SSBs) with advanced electrolyte and separator technologies. Although in recent years a series of superionic conductors have been developed for electrolytes and separators, their performance does not satisfy demanding criteria due to large impedance from poor solid electrolyte-electrode contact and questionable electrochemical and mechanical stability. Unlike the well-established roll-to-roll fabrication of conventional Li-ion batteries, the processing of SSBs is unique due to the brittleness of solid-state electrolytes (SSEs). The commercially available or lab-developed SSE discs are usually very thick (hundreds of micrometers to millimeters) to overcome their brittle nature, which unfortunately increases the cell impedance and accounts for the majority of the overall cell weight and volume, leading to dramatically decreased power and energy densities. In this project, we will investigate 3D printing techniques to overcome safety, fabrication, mechanical, and electrochemical issues in SSBs. 3D printing builds complex structures in a layer-by-layer fashion, which allows rapid production of hierarchical architectures, gradient and multi-material structures, and multi-component assemblies. 3D printing is an emerging area that could fundamentally transform energy storage devices. For example, 3D printing can produce batteries with arbitrary form factors to fit a product’s specific volume requirements and can create interwoven electrode arrangements over a wide range of length scales to improve transport and increase power density for a given energy density. For SSBs, 3D printing may dramatically reduce the separator thickness from ~1 mm (by hydraulic pressing) to tens of micrometers or less. In addition, the interfacial contact area between the electrolyte and the electrode may be increased via 3D interdigitated designs. Hence, we expect a significant reduction of the overall cell impedance and enhancement of both energy and power densities of SSBs by harnessing an array of 3D printing technologies being developed at Lawrence Livermore National Laboratory (LLNL).

25 ENERGY STORAGE↗
DOE OSTI2025

Understanding the formation of a low-pressure pedestal in the presence of a strong internal transport barrier in DIII-D high β p plasmas

As a promising scenario for fusion reactors, the high poloidal-beta (β P ) scenario is characterized by a strong large radius internal transport barrier (ITB), which significantly enhances the overall confinement quality and the bootstrap current fraction for fully non-inductive operation. It is frequently observed that in the presence of a strong ITB, the pedestal height is lower and is accompanied by small edge localized modes (ELMs), which further improves the compatibility of a high performance core with an edge solution. A mechanism for the formation of the low pedestal is proposed in this paper. It is found that the strong ITB creates an off-axis bootstrap current to clamp the local safety factor q, and thus the magnetic shear in the outer core/pedestal region is increased. Gyrokinetic simulations with the CGYRO code show that the higher magnetic shear brings the experimental profiles into the range where the growth rate of drift-wave instabilities and thus transport is higher, and therefore a lower pedestal gradient is expected. Here, the combination of low pedestal and high magnetic shear further enhances the turbulent transport across the whole pedestal, consistent with power balance analysis. Such a positive feedback mechanism ultimately results in a lower pressure pedestal as observed in experiments. Under such a low pedestal, linear simulations with BOUT++ predict the growth rates of peeling–ballooning modes to be lower across the whole toroidal mode number spectra, and the nonlinear BOUT++ simulation exhibits lower saturated fluctuation intensity as well, consistent with the experimentally observed lower ELM size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Stability of beta-induced Alfvén eigenmodes (BAE) in DIII-D

Although the stability of ellipticity, toroidal and reversed-shear Alfvén eigenmodes (EAE, TAE, RSAE) are relatively well understood, less is known about the stability of lower-frequency modes such as the beta-induced Alfvén eigenmode (BAE) but, because they are often unstable in present devices and are implicated in fast-ion transport, understanding their stability is vital. BAE stability is studied in primarily weak or reversed shear DIII-D plasmas with sub-Alfvénic deuterium beams. Modes are classified based on electron cyclotron emission, beam emission spectroscopy, magnetics, and interferometer data. The study is limited to the initial two seconds of the discharge, where the evolving q profile provides an effective scan of the dependence of stability upon q. In a dedicated experiment, BAEs are unstable at times in the discharge when the minimum of the safety factor q min is close to a rational number. The observed mode frequencies are usually close to analytic estimates of the BAE accumulation point and the eigenfunction peaks in the vicinity of q min . Unstable BAEs usually occur in bursts that chirp rapidly in frequency. To isolate the importance of thermal and beam gradients in driving the modes, the beam and electron cyclotron heating power is altered for 50–100 ms durations in reproducible discharges. As expected from the resonance condition, BAEs depend sensitively on the beam power and injection geometry. Modes only persist for ~25 ms because the anisotropic beam population only interacts strongly with the modes over a relatively narrow range of q. Lastly, a database of over 1000 beam-heated discharges shows that BAEs are more likely to be unstable when the poloidal beta exceeds 0.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

A novel measurement of marginal Alfvén eigenmode stability during high power auxiliary heating in JET

The interaction of Alfvén eigenmodes (AEs) and energetic particles is one of many important factors determining the success of future tokamaks. In JET, eight in-vessel antennas were installed to actively probe stable AEs with frequencies ranging 25–250 kHz and toroidal mode numbers |n| < 20. During the 2019–2020 deuterium campaign, almost 7500 resonances and their frequencies f 0 , net damping rates γ < 0, and toroidal mode numbers were measured in almost 800 plasma discharges. From a statistical analysis of this database, continuum and radiative damping are inferred to increase with edge safety factor, edge magnetic shear, and when including non-ideal effects. Both stable AE observations and their associated damping rates are found to decrease with |n|. Active antenna excitation is also found to be ineffective in H-mode as opposed to L-mode; this is likely due to the increased edge density gradient’s effect on accessibility and ELM-related noise’s impact on mode identification. A novel measurement is reported of a marginally stable, edge-localized ellipticity-induced AE probed by the antennas during high-power auxiliary heating (ion cyclotron resonance heating and neutral beam injection) up to 25 MW. NOVA-K kinetic-MHD simulations show good agreement with experimental measurements of f 0 , γ, and n, indicating the dominance of continuum and electron Landau damping in this case. Similar experimental and computational studies are planned for the recent hydrogen and ongoing tritium campaigns, in preparation for the upcoming DT campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A novel measurement of marginal Alfven Eigenmode stability during high power auxiliary heating in JET

The interaction of Alfven Eigenmodes (AEs) and energetic particles is one of many important factors determining the success of future tokamaks. In JET, eight in-vessel antennas were installed to actively probe stable AEs with frequencies ranging 25-250 kHz and toroidal mode numbers |n| < 20. During the 2019-2020 deuterium campaign, almost 7500 resonances and their frequencies f0, net damping rates \gamma < 0, and toroidal mode numbers were measured in almost 800 plasma discharges. From a statistical analysis of this database, continuum and radiative damping are inferred to increase with edge safety factor, edge magnetic shear, and when including non-ideal effects. Both stable AE observations and their associated damping rates are found to decrease with |n|. Active antenna excitation is also found to be ineffective in H-mode as opposed to L-mode; this is likely due to the increased edge density gradient's effect on accessibility and ELM-related noise's impact on mode identification. A novel measurement is reported of a marginally stable, edge-localized Ellipticity-induced AE probed by the antennas during high-power auxiliary heating (ICRH and NBI) up to 25 MW. NOVA-K kinetic-MHD simulations show good agreement with experimental measurements of f0, \gamma, and n, indicating the dominance of continuum and electron Landau damping in this case. Similar experimental and computational studies are planned for the recent hydrogen and ongoing tritium campaigns, in preparation for the upcoming DT campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Verification and validation of linear gyrokinetic and kinetic-MHD simulations for internal kink instability in DIII-D tokamak

Here, verification and linear validation of the internal kink instability in tokamak have been performed for both gyrokinetic (GTC) and kinetic-MHD codes (GAM-solver, M3D-C1-K, NOVA, XTOR-K). Using realistic magnetic geometry and plasma profiles from the same equilibrium reconstruction of the DIII-D shot #141216, these codes exhibit excellent agreement for the growth rate and mode structure of the internal kink mode when all kinetic effects are suppressed. The simulated radial mode structures, obtained from linear simulations, are in reasonable agreement with the normalised electron cyclotron emission measurement after adjusting, within the experimental uncertainty, the safety factor q = 1 flux-surface location in the equilibrium reconstruction. Compressible magnetic perturbations strongly destabilize the kink, while poloidal variations of the equilibrium current density reduce the growth rate of the kink. Furthermore, kinetic effects of thermal ions are found to decrease the kink growth rate in kinetic-MHD simulations, but increase the kink growth rate in gyrokinetic simulations, due to the additional drive of the ion temperature gradient and parallel electric field. Kinetic thermal electrons are found to have negligible effects on the internal kink instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Stability analysis of Alfvén eigenmodes excited by ion cyclotron resonance heating on EAST

Alfvén wave instabilities driven by energetic particles are common in fusion devices. Understanding their behavior is essential for the good confinement of fusion plasma. For this purpose, a series of experiments are performed on EAST to investigate the excitation of toroidal Alfvén eigenmodes (TAEs). Experimentally, it was found that AEs with frequencies around 80, 134, 157 kHz are excited by ion cyclotron resonance heating (ICRH) hydrogen minority heating scenario. Moreover, the excitation of AEs is independent of the wall-coating materials, but determined with the generation and confinement of the fast ions. Statistical analysis suggests that the TAEs can only be excited when the ICRH power is larger than 2 MW and the H 98 factor is larger than 1.15. In line with the experiments, a set of simulations using TORIC, ASCOT, and NOVA-C is performed. The simulation results show that with the experimental density profile and safety factor, the measured TAE with frequency of 134 kHz is well reproduced by taking into account the plasma toroidal rotation frequency. However, the appearance of the 80 kHz mode cannot be captured in the simulations. The ICRH-generated fast hydrogen ions mainly have banana orbits and that their perpendicular velocity is much larger than that of the parallel ions. The stability analysis with NOVA-C suggests that the radial gradient of the fast H ion distribution is the only driving source of TAEs. For TAEs locate in the center of Alfvén continuum, the D ion Landau damping is the dominant damping term; For most other TAEs which have intersections with the continuum boundary, the continuum damping becomes the dominant damping mechanism.

Alfvén eigenmodes↗
DOE OSTI2023

Energetic particle marginal stability profile for HL-2M integrated simulation based on neural network module

Abstract A critical gradient model is employed to develop a module of energetic particle (EP) marginal stability profiles in OMFIT integrated simulations for studying EP transport. Currently, each iteration of transport evolution is approximately 10 min in the integrated simulation, whereas, the EP marginal stability profile, which serves as an input in the integrated simulation could take much longer; the reason being a combination of the TGLFEP and EPtran codes is employed in our previous investigation. To reduce the simulation time, the critical gradient is predicted by a neural network instead of the TGLFEP code, and the EPtran code is revised with parallel computing, so that the running time of this module can be controlled to within 5 min. The predictions are in good agreement with previous approaches. The integrated simulation of HL-2M with Alfven eigenmodes transported by neutral beam EP profiles indicates that EP transport reduces the total pressure and current as expected, but could also under some conditions raise the safety factor in the core, which is favorable for reversed magnetic shear and high-performance plasmas.

Physics↗
DOE OSTI2023

Simulations of Water Flow in Relation to a Steady Criticality in an Unsaturated Alluvial Repository

Oak Ridge National Laboratory (ORNL) is examining the conditions under which a criticality event could be ruled out for large packages placed in an unsaturated alluvial repository. This work specifically examines the water level in a stylized waste package that is assumed (1) to fail on the top, and (2) to empty as water is driven away—not by boiling—but by fluid flow phenomena driven by thermal gradients. This analysis uses the PFLOTRAN code package. Specifically, this year’s work includes examination of the heat rate at which water is driven away for various percolation rates using the same assumptions listed in the 2022 annual report. The STANDARDS (formerly UNF-ST&DARDS) package has predicted dual-purpose canister (DPC) neutron multiplication factors (k-effectives) ranging above 1.1 (unitless) with failed components. The DPC designs were not created with the intent to use for disposal purposes. Emplacing such packages may be worth consideration if it can be shown that criticality is either extremely unlikely or of very low consequence to the repository’s safety case. This work aims to help establish hydrologic boundary conditions for a highly hypothetical, highly stylized subsurface criticality event. The approach to critical is assumed to be slow, producing steady heating rates under a few kilowatts. For a DPC containing capillary media, the simulated power required for dry-out was proportional to the percolation rate but was unaffected by the size of a large breech on top of the DPC. Results for single cases with no capillary media in the DPC suggest that higher infiltration rates may be required in those cases to cause flooding. Bounding mechanisms and assumptions must be identified and characterized further by performing additional perturbations to various input parameters to demonstrate robustness of the results. This might be accomplished by examining responses to power pulses to determine the system transfer function required to enable a reduced order feedback model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Suppression of ion temperature gradient modes by Alfvén activity above a drive threshold in DIII-D

A recent study demonstrates that the suppression of ion temperature gradient (ITG) modes can occur during the nonlinear evolution of toroidicity-induced Alfvén eigenmodes (TAEs) in the DIII-D tokamak [Du et al., Phys. Rev. Lett. 135, 265101 (2025)]. In that work, ITG was suppressed by the formation of a narrow, TAE-induced shear flow layer, whose shearing rate exceeded the ITG decorrelation rate. Here, the shear flow arises from an imbalance between Reynolds and Maxwell stress forces, as the TAE departs from the conventional shear Alfvén wave polarization. This follow-up paper systematically identifies the plasma conditions required for robust ITG suppression through a series of comparative experiments. The results show that TAEs routinely suppress ITG turbulence in plasmas with higher local safety factor (q), elevated fast-ion beta, and larger populations of fast ions on passing orbits, i.e., conditions consistent with the substantial TAE drive. Database analysis further reveals the existence of a threshold in TAE drive for ITG suppression. That is, once the drive exceeds a critical value within a favorable q window, the system undergoes the nonlinear bifurcation process, characterized by a sharp increase in TAE saturated amplitudes at a nearly fixed fast ion drive, suppression of ITG turbulence, and the formation of an internal thermal transport barrier at the localized radii.

Du, X. D. [General Atomics, San Diego, CA (United ↗
DOE OSTI2026

Application of artificial intelligence methods in the international roughness index prediction of rigid and composite pavements: a systematic review

The International Roughness Index (IRI) is a widely adopted metric for quantifying pavement roughness, directly influencing vehicle safety, ride comfort, and overall roadway performance. In recent years, the use of Machine Learning (ML) models for IRI prediction has gained momentum, with the goal of improving the allocation of maintenance and rehabilitation resources by enabling accurate assessments of pavement conditions. Most prior reviews, however, have concentrated on flexible pavements, leaving a notable gap regarding rigid and composite pavements. To address this gap, the present study conducts a systematic review of Artificial Intelligence (AI) methods applied to IRI prediction for rigid and composite pavements. Literature published between 2004 and 2025 is synthesized to highlight prevailing trends, methodological contributions, and directions for future research. Particular attention is given to the types of models employed, the datasets used for training and validation, and the role of input variables and data-processing strategies. Across the included studies, ensemble learning methods (especially gradient boosting variants such as XGBoost), artificial neural networks, and hybrid architectures frequently achieved high predictive skill, with several models reporting test-set coefficients of determination approaching 0.9–0.96, indicating strong potential for capturing the influence of traffic, pavement structure, and climatic factors. Since these results are obtained from heterogeneous datasets and evaluation protocols, they are interpreted qualitatively rather than as strict cross-study rankings. Analysis of input variables revealed that pavement age and initial IRI were included in 91% (21 of 23) and 78% (18 of 23) of studies, respectively. Climatic variables such as the freezing index appeared in 57% (13 of 23), while traffic-related factors were considered in 65% (15 of 23). The findings underscore the importance of standardized, high-quality datasets, such as those from the Long-Term Pavement Performance (LTPP) program, along with data consistency, model interpretability, computational efficiency, and replicability in enhancing IRI prediction. Future research should focus on incorporating input variable selection techniques to identify the most influential predictors, thereby improving accuracy and robustness. Integrating these approaches with advanced non-linear data-driven models, coupled with robust hyperparameter optimization, holds considerable promise for strengthening the reliability of IRI prediction and supporting resilient pavement management strategies.

42 ENGINEERING↗
DOE OSTI2024

Overview of ASDEX upgrade results in view of ITER and DEMO

Experiments on ASDEX Upgrade (AUG) in 2021 and 2022 have addressed a number of critical issues for ITER and EU DEMO. A major objective of the AUG programme is to shed light on the underlying physics of confinement, stability, and plasma exhaust in order to allow reliable extrapolation of results obtained on present day machines to these reactor-grade devices. Concerning pedestal physics, the mitigation of edge localised modes (ELMs) using resonant magnetic perturbations (RMPs) was found to be consistent with a reduction of the linear peeling-ballooning stability threshold due to the helical deformation of the plasma. Conversely, ELM suppression by RMPs is ascribed to an increased pedestal transport that keeps the plasma away from this boundary. Candidates for this increased transport are locally enhanced turbulence and a locked magnetic island in the pedestal. The enhanced D-alpha (EDA) and quasi-continuous exhaust (QCE) regimes have been established as promising ELM-free scenarios. Here, the pressure gradient at the foot of the H-mode pedestal is reduced by a quasi-coherent mode, consistent with violation of the high-n ballooning mode stability limit there. This is suggestive that the EDA and QCE regimes have a common underlying physics origin. In the area of transport physics, full radius models for both L- and H-modes have been developed. These models predict energy confinement in AUG better than the commonly used global scaling laws, representing a large step towards the goal of predictive capability. A new momentum transport analysis framework has been developed that provides access to the intrinsic torque in the plasma core. In the field of exhaust, the X-Point Radiator (XPR), a cold and dense plasma region on closed flux surfaces close to the X-point, was described by an analytical model that provides an understanding of its formation as well as its stability, i.e., the conditions under which it transitions into a deleterious MARFE with the potential to result in a disruptive termination. With the XPR close to the divertor target, a new detached divertor concept, the compact radiative divertor, was developed. Here, the exhaust power is radiated before reaching the target, allowing close proximity of the X-point to the target. No limitations by the shallow field line angle due to the large flux expansion were observed, and sufficient compression of neutral density was demonstrated. With respect to the pumping of non-recycling impurities, the divertor enrichment was found to mainly depend on the ionisation energy of the impurity under consideration. In the area of MHD physics, analysis of the hot plasma core motion in sawtooth crashes showed good agreement with nonlinear 2-fluid simulations. This indicates that the fast reconnection observed in these events is adequately described including the pressure gradient and the electron inertia in the parallel Ohm’s law. Concerning disruption physics, a shattered pellet injection system was installed in collaboration with the ITER International Organisation. Thanks to the ability to vary the shard size distribution independently of the injection velocity, as well as its impurity admixture, it was possible to tailor the current quench rate, which is an important requirement for future large devices such as ITER. Progress was also made modelling the force reduction of VDEs induced by massive gas injection on AUG. The H-mode density limit was characterised in terms of safe operational space with a newly developed active feedback control method that allowed the stability boundary to be probed several times within a single discharge without inducing a disruptive termination. Regarding integrated operation scenarios, the role of density peaking in the confinement of the ITER baseline scenario (high plasma current) was clarified. The usual energy confinement scaling ITER98(p,y) does not capture this effect, but the more recent H20 scaling does, highlighting again the importance of developing adequate physics based models. Advanced tokamak scenarios, aiming at large non-inductive current fraction due to non-standard profiles of the safety factor in combination with high normalised plasma pressure were studied with a focus on their access conditions. A method to guide the approach of the targeted safety factor profiles was developed, and the conditions for achieving good confinement were clarified. Based on this, two types of advanced scenarios (‘hybrid’ and ‘elevated’

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

First observations of edge instabilities in strongly shaped negative triangularity plasmas on DIII-D

Throughout the 2023 DIII-D negative triangularity (NT) campaign, unexpected magnetic fluctuations indicative of an edge localized instability were observed in the majority of strongly shaped (–0.55 ≤ δ ≤ –0.45) discharges. Moreover, these same fluctuations were found to be absent in weaker NT plasma shapes. Based on a database study, three separate mode behaviors are observed based primarily on the edge safety factor and normalized plasma beta β N . The main regime is the bursty state, in which short (~5 ms) magnetic bursts occur every 5–10 ms. Each burst drives a small reduction in the edge electron temperature (T e ) as measured by electron cyclotron emissions (ECE), which then rapidly recovers between the bursts. The quiescent regime appears to have governing mechanics similar to the bursty regime, but with multiple unique mode signatures observed in the magnetics. These additional modes greatly reduce the bursty nature of the plasma. Finally, a saturated state is observed in a number of discharges, particularly at early time slices. The saturated regime is often short-lived (maximum 500 ms), but can have a large impact on the dynamics of the plasma edge region, causing significant drops in electron temperature as observed in the ECE diagnostic. 2D ECE imaging (ECE-I) is utilized, showing large kink-like perturbations localized near the last closed flux surface that extend into the SOL indicative of an external kink/peeling behavior. Additionally, evidence of phase mixing and observed tearing-parity perturbations localized near the edge rational surfaces is observed in the quiescent regime plasmas. As a result, the various modes do not appear to have a large impact on global confinement but may play a role in regulating the transport of the NT edge and the observed edge gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗