Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sandwich compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of Building Block Connectivity and Ion Solvation on Electrochemical Stability and Ionic Conductivity in Novel Fluoroether Electrolytes

Novel electrolytes are required for the commercialization of batteries with high energy densities such as lithium metal batteries. Recently, fluoroether solvents have become promising electrolyte candidates because they yield appreciable ionic conductivities, high oxidative stability, and enable high Coulombic efficiencies for lithium metal cycling. However, reported fluoroether electrolytes have similar molecular structures, and the influence of ion solvation in modifying electrolyte properties has not been elucidated. In this work, we synthesize a group of fluoroether compounds with reversed building block connectivity where ether moieties are sandwiched by fluorinated end groups. These compounds can support ionic conductivities as high as 1.3 mS/cm (30 °C, 1 M salt concentration). Remarkably, we report that the oxidative stability of these electrolytes increases with decreasing fluorine content, a phenomenon not observed in other fluoroethers. Using Raman and other spectroscopic techniques, we show that lithium ion solvation is controlled by fluoroether molecular structure, and the oxidative stability correlates with the “free solvent” fraction. Finally, we show that these electrolytes can be cycled repeatedly with lithium metal and other battery chemistries. Understanding the impact of building block connectivity and ionic solvation structure on electrochemical phenomena will facilitate the development of novel electrolytes for next-generation batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

3D Electron Diffraction Structure Determination of Terrylene, a Promising Candidate for Intermolecular Singlet Fission

Herein we demonstrate the prowess of the 3D electron diffraction approach by unveiling the structure of terrylene, the third member in the series of peri-condensed naphthalene analogues, which has eluded structure determination for 65 years. The structure was determined by direct methods using electron diffraction data and corroborated by dispersion-inclusive density functional theory optimizations. Terrylene crystalizes in the monoclinic space group P2 1 /a, arranging in a sandwich-herringbone packing motif, similar to analogous compounds. Having solved the crystal structure, we use many-body perturbation theory to evaluate the excited-state properties of terrylene in the solid-state. We find that terrylene is a promising candidate for intermolecular singlet fission, comparable to tetracene and rubrene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transport anomalies in the layered compound BaPt 4 Se 6

We report a layered ternary selenide BaPt 4 Se 6 featuring sesqui-selenide Pt 2 Se 3 layers sandwiched by Ba atoms. The Pt 2 Se 3 layers in this compound can be derived from the Dirac-semimetal PtSe 2 phase with Se vacancies that form a honeycomb structure. This structure results in a Pt (VI) and Pt (II) mixed-valence compound with both PtSe 6 octahedra and PtSe 4 square net coordination configurations. Temperature-dependent electrical transport measurements suggest two distinct anomalies: a resistivity crossover, mimic to the metal-insulator (M-I) transition at ~150 K, and a resistivity plateau at temperatures below 10 K. The resistivity crossover is not associated with any structural, magnetic, or charge order modulated phase transitions. Magnetoresistivity, Hall, and heat capacity measurements concurrently suggest an existing hidden state below 5 K in this system. Angle-resolved photoemission spectroscopy measurements reveal a metallic state and no dramatic reconstruction of the electronic structure up to 200 K.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Strong, Lighweight Curved Panels

Sandwich construction gives panels structural efficiency. Large panels with compound curvatures are formed from a honeycomb core faced with sheets of graphite/epoxy cloth and tape. Developed for pod on Space Shuttle, construction readily adapted to curved skin panels on cars, trucks, and airplanes.

Molho, R.↗
DOE OSTI2020

Dimer rattling mode induced low thermal conductivity in an excellent acoustic conductor

A solid with larger sound speeds usually exhibits higher lattice thermal conductivity. Here, we report an exception that CuP2 has a quite large mean sound speed of 4155 m s –1 , comparable to GaAs, but single crystals show very low lattice thermal conductivity of about 4 W m –1 K –1 at room temperature, one order of magnitude smaller than GaAs. To understand such a puzzling thermal transport behavior, we have thoroughly investigated the atomic structures and lattice dynamics by combining neutron scattering techniques with first-principles simulations. This compound crystallizes in a layered structure where Cu atoms forming dimers are sandwiched in between P atomic networks. In this work, we reveal that Cu atomic dimers vibrate as a rattling mode with frequency around 11 meV, which is manifested to be remarkably anharmonic and strongly scatters acoustic phonons to achieve the low lattice thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isolation of a new polyoxometalate complex of plutonium

We report the synthesis, plus structural and spectroscopic characterization, of a plutonium(IV) complex with the polyoxometalate W 5 O 18 6− . The complex was isolated as Cs 8 [Pu(W 5 O 18 ) 2 ]·CsCl·6.5H 2 O, with the tetravalent actinide cation sandwiched between two lacunary polyoxotungstate anions. It represents a rare case of a POM compound with plutonium and also the first Peacock–Weakley type complex of plutonium.

Colliard, Ian [Lawrence Livermore National Laborat↗
DOE OSTI2020

Revisiting heat treatment and surface activation of GaAs photocathodes: In situ studies using scanning tunneling microscopy and photoelectron spectroscopy

The lifetime of GaAs photocathodes in polarized electron guns is limited due to the delicate activation layer. An atomically clean and smooth GaAs surface is needed to deposit a robust activation layer, such as Cs 2 Te, with longer lifetime compared to traditional (Cs,O) activation. A previous experiment with Cs 2 Te activation on GaAs used heat cleaning temperatures around 400°C to avoid an increase in surface roughness [Bae et al., Appl. Phys. Lett. 112, 154101 (2018)]. Furthermore, high-temperature heat cleaning around 580°C, which results in a relatively contamination-free surface, could be one possible way to improve quantum efficiency. However, one should be cautious about surface roughness degradation during high-temperature heat cleaning. In this paper, we report results of surface roughness measurements on native, heat cleaned, and (Cs,O) activated GaAs photocathodes under vacuum. The results, measured by ultrahigh vacuum scanning tunneling microscopy, show that the surface roughness improves as the heat cleaning temperature is increased, by at least a factor of three for 580°C heat cleaning, compared to the native sample. Activation with (Cs,O) is shown to increase surface roughness by a factor of four compared to a 580°C heat cleaned sample. This confirms that high-temperature heat cleaning can be useful for depositing good quality robust activation layers on GaAs. Additionally, we also report chemical analysis for each step of preparation for p-doped GaAs photocathodes using X-ray photoelectron spectroscopy (XPS), angle-resolved XPS, and ultraviolet photoelectron spectroscopy. Our results indicate that the (Cs,O) activation layer forms a sandwich structure consists of Cs and oxygen. We found no formation of any specific compound such as Cs 2 O or Cs 11 O 3 .

43 PARTICLE ACCELERATORS↗
NASA NTRS1990

Reactivity of pi-complexes of Ti, V, and Nb towards dithioacetic acid: Synthesis and structure of novel metal sulfur-containing complexes

In order to use sulfur-containing resources economically and with minimal environmental damage, it is important to understand the desulfurization processes. Hydrodesulfurization, for example, is carried out on the surface of a heterogeneous metal sulfide catalyst. Studies of simple, soluble inorganic systems provide information regarding the structure and reactivity of sulfur-containing compounds with metal complexes. Further, consistent with recent trends in materials chemistry, many model compounds warrant further study as catalyst precursors. The reactivity of low-valent organometallic sandwich pi-complexes toward dithiocarboxylic acids is described. For example, treatment of bisbenzene vanadium with CH3CSSH affords a divanadium tetrakis(dithioacetate) complex. The crystallographically determined V-V bond distance, 2.800(2), is nearly the same as the V-V bond distance in a V(mu-nu squared-S2)2V' unit in the mineral patonite (VS4)n. The stability of the V2S4 core in the dimer is demonstrated by evidence of V2S4(+) in the mass spectrum (70 eV, solid probe) of the vanadium dimer. Several other systems relevant to HDS catalysis are also discussed.

Duraj, Stan A.↗
DOE OSTI2024

Venturing Past Uranium: Synthesis of a Np(IV) Polyoxomolybdate–Alkoxide Sandwich Complex

The synthesis of a Np(IV) polyoxomolybdate– alkoxide sandwich complex, (TBA) 2 [Np{Mo 5 O 13 (OMe) 4 NO} 2 ] (TBA = tetrabutylammonium), is reported. This compound represents a rare example of a neptunium polyoxometalate cluster isolated outside of water, allowing for characterization of its electrochemical properties in nonaqueous solvents. Complexation of An(IV) cations fine-tunes the redox properties of the cluster, with the observed four reversible reductive events varying slightly both in potential and peak separation depending on the actinide present. The new Np(IV) complex also shows an irreversible event assigned to oxidation of Np(IV) to Np(V). New methodology for facile 17 O enrichment of (TBA) 2 [Mo 5 O 13 (OMe) 4 NO][Na(MeOH)] is presented, which provides a simple pathway to 17 O enriched analogues of the sandwich complexes discussed (Zr(IV), Hf(IV), Th(IV), U(IV), U(V), Np(IV)). 17 O NMR spectroscopy subsequently provides insights into both the nature of metal–oxygen bonding, as well as the influence of unpaired f-electrons on the local environment of the oxygen nuclei.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Superconductivity above 90 K in the square-planar compound system ABa2Cu3O(6 + x) with A = Y, La, Nd, Sm, Eu, Gd, Ho, Er, and Lu

Superconductivity has been found in the 90-K range in ABa2Cu3O(6 + x) with A = La, Nd, Sm, Eu, Gd, Ho, Er, and Lu in addition to Y. The results suggest that the unique square-planar Cu atoms, each surrounded by four or six oxygen atoms, are crucial to the superconductivity of oxides in general. In particular, the high Tc of ABa2Cu3O(6 + x) is attributed mainly to the quasi-two-dimensional assembly of the CuO2-Ba-CuO(2 + x)Ba-CuO2 layers sandwiched between two A layers, with particular emphasis in the CuO(2 + x) layers. Higher-Tc oxides are predicted for compounds with bigger assemblies of CuO2 layers coupled by Ba layers.

Hor, P. H.↗
DOE OSTI2020

Exotic bonding interactions and coexistence of chemically distinct periodic lattice distortions in the charge density wave compound TaTe2

The superstructure of TaTe 2 is examined by total high-energy x-ray scattering and large-scale structure modeling over a broad temperature range. At room temperature, it features double zigzag chains of Ta atoms exhibiting metallic bonding. The chains are sandwiched between planes of weakly interacting Te atoms. Below 170 K, the chains appear broken to “butterflylike” clusters and single zigzag chains of covalently bonded Te atoms emerge while Ta-Te interactions remain largely ionic. This is a rare example of a charge density wave compound stabilized by bonding that is a mix of covalent, ionic, and metallic character giving rise to chemically distinct periodic lattice distortions. We argue that the formation of periodic lattice distortions in the Te sublattice in addition to those in the Ta sublattice favors charge delocalization, which may explain the unusually diminished resistivity and increased magnetic susceptibility exhibited by the low-temperature charge density wave phase of TaTe 2 . The effect may be common for 5d transition metal chalcogenides containing Te because of the extended electronic orbitals of the constituent atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2010

Simple Check Valves for Microfluidic Devices

A simple design concept for check valves has been adopted for microfluidic devices that consist mostly of (1) deformable fluorocarbon polymer membranes sandwiched between (2) borosilicate float glass wafers into which channels, valve seats, and holes have been etched. The first microfluidic devices in which these check valves are intended to be used are micro-capillary electrophoresis (microCE) devices undergoing development for use on Mars in detecting compounds indicative of life. In this application, it will be necessary to store some liquid samples in reservoirs in the devices for subsequent laboratory analysis, and check valves are needed to prevent cross-contamination of the samples. The simple check-valve design concept is also applicable to other microfluidic devices and to fluidic devices in general. These check valves are simplified microscopic versions of conventional rubber- flap check valves that are parts of numerous industrial and consumer products. These check valves are fabricated, not as separate components, but as integral parts of microfluidic devices. A check valve according to this concept consists of suitably shaped portions of a deformable membrane and the two glass wafers between which the membrane is sandwiched (see figure). The valve flap is formed by making an approximately semicircular cut in the membrane. The flap is centered over a hole in the lower glass wafer, through which hole the liquid in question is intended to flow upward into a wider hole, channel, or reservoir in the upper glass wafer. The radius of the cut exceeds the radius of the hole by an amount large enough to prevent settling of the flap into the hole. As in a conventional rubber-flap check valve, back pressure in the liquid pushes the flap against the valve seat (in this case, the valve seat is the adjacent surface of the lower glass wafer), thereby forming a seal that prevents backflow.

Willis, Peter A.↗
DOE OSTI2021

Investigation of Nucleation and Growth at a Liquid–Liquid Interface by Solvent Exchange and Synchrotron Small-Angle X-Ray Scattering

Hybrid nanomaterials possess complex architectures that are driven by a self-assembly process between an inorganic element and an organic ligand. The properties of these materials can often be tuned by organic ligand variation, or by swapping the inorganic element. This enables the flexible fabrication of tailored hybrid materials with a rich variety of properties for technological applications. Liquid-liquid interfaces are useful for synthesizing these compounds as precursors can be segregated and allowed to interact only at the interface. Although procedurally straightforward, this is a complex reaction in an environment that is not easy to probe. Here, we explore the interfacial crystallization of mithrene, a supramolecular multi-quantum well. This material sandwiches a well-defined silver-chalcogenide layer between layers of organic ligands. Controlling mithrene crystal size and morphology to be useful for applications requires understanding details of its crystal growth, but the specific mechanism for this reaction remain only lightly investigated. We performed a study of mithrene crystallization at an oil-water interfaces to elucidate how the interfacial free energy affects nucleation and growth. We exchanged the oil solvent on the basis of solvent viscosity and surface tension, modifying the dynamic contact angle and interfacial free energy. We isolated and characterized the reaction byproducts via scanning electron microscopy (SEM). We also developed a high-throughput small angle X-ray scattering (SAXS) technique to measure crystallization at short reaction timescales (minutes). Our results showed that modifying interfacial surface energy affects both the reaction kinetics and product size homogeneity and yield. Our SAXS measurements reveal the onset of crystallinity after only 15 min. These results provide a template for exploring directed synthesis of complex materials via experimental methods.

Schriber, Elyse A.↗
DOE OSTI2021

Sandwiched Kagomé Lattices in a Coordination Polymer Based on Mixed-Valent Uranium

The metal–organic material U V O(U VI O 2 ) 2 (OH) 5 (Triaz) 2 (Triaz = 1,2,4-triazolate) has been isolated from the reaction of UO 2 (NO 3 ) 2 ·6H 2 O with 1,2,4-triazole in the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]). The compound’s crystal structure is comprised of planar inorganic layers interconnected by organic linkers into a 3D framework. These layers represent a uranium-based coordination polymer with a Kagomé topology that to the best of our knowledge has never been recognized in f-element coordination chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

MX Anti-MXenes from Non-van der Waals Bulks for Electrochemical Applications: The Merit of Metallicity and Active Basal Plane

Two-dimensional transition-metal compounds (2DTMCs) are promising materials for electrochemical applications, but 2DTMCs with metallicity and active basal planes are rare. In this work, we proposed a simple and effective strategy to extract 2DTMCs from non-van der Waals bulk materials and established a material library of 79 2DTMCs, which we named as anti-MXenes since they are composed of one M atomic layer sandwiched by two X atomic layers. By means of density functional theory computations, 24 anti-MXenes were confirmed to be thermodynamically, dynamically, mechanically, and thermally stable. The metallicity and active basal plane endow these anti-MXenes with potential as excellent electrode materials, for example, as electrocatalysts for hydrogen evolution reactions (HER). Among the noble-metal free anti-MXenes with favorable H-binding, CuS can boost HER at the whole range of H coverages, while CoSi, FeB, CoB, and CoP show promise for HER at some specific H coverages. The active sites are the tetra-coordinating nonmetal atoms at the basal planes, thus rendering a very high density of active sites for these materials. CoB is also a promising anode material for lithium-ion batteries, showing low Li diffusion energy barriers, a very high capacity, and a suitable open circuit voltage. Overall, this work promotes the “computational exfoliation” of 2D materials from non-van der Waals bulks and exemplifies the applications of anti-MXenes in various electrochemical processes.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Synthesis and structures of metal chalcogenide precursors

The reactivity of early transition metal sandwich complexes with sulfur-rich molecules such as dithiocarboxylic acids was studied. Researchers recently initiated work on precursors to CuInSe2 and related chalcopyrite semiconductors. Th every high radiation tolerance and the high absorption coefficient of CuInSe2 makes this material extremely attractive for lightweight space solar cells. Their general approach in early transition metal chemistry, the reaction of low-valent metal complexes or metal powders with sulfur and selenium rich compounds, was extended to the synthesis of chalcopyrite precursors. Here, the researchers describe synthesis, structures, and and routes to single molecule precursors to metal chalcogenides.

Hepp, Aloysius F.↗
DOE OSTI2019

Field-induced quantum spin liquid in the Kitaev-Heisenberg model and its relation to α – RuCl 3

Recently considerable excitement has arisen due to the experimental observation of a field-induced spin liquid phase in the compound α– RuCl 3 . Yet, the nature of this putative spin liquid phase and the relevant microscopic model Hamiltonian remain still unclear. In this work, we address these questions by performing large-scale numerical simulations of a generalized Kitaev-Heisenberg model proposed to describe the physics of α– RuCl 3 . Although an intermediate phase does not appear for in-plane magnetic fields, our results strongly suggest that a stable intermediate spin liquid phase, sandwiched between a magnetically ordered phase at low fields and a high-field polarized phase, can be induced by out-of-plane magnetic fields. Moreover, we show that this field-induced spin liquid phase can be smoothly connected to a spin liquid possessing a spinon Fermi surface as proposed recently for the Kitaev model. The relevance of our findings to α– RuCl 3 is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

Fire-retardant decorative inks for aircraft interiors

Commercial and experimental fire retardants were screened as potential fire retardants for acrylic printing inks used on aircraft interior sandwich panels. The fire retardants are selected according to their physical properties and their thermostabilities. A criterion for selecting a more stable fire retardant is established. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) are used to determine thermostabilities. Results show that the fire retardant formulations are more thermally stable than the acrylic ink control. It is determined that an ink formulation containing a brominated phenol and carboxy-terminated butadiene acrylonitrile which has been modified with a brominated polymeric additive (BPA), yields the highest limiting oxygen index (LOI) of all the compounds tested. All of the fire-retardant formulations have a higher oxygen index than the baseline acrylic ink.

Kourtides, D. A.↗