SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New type of splice for composite sandwich structure reduces peak shear stress in structure. Layers of alternating fiber orientation interposed between thin ears in adhesive joint. Developed for structural joint in spar of helicopter rotor blade, increases precision of control over thickness of adhesive at joint. Joint easy to make, requires no additional pieces, and adds little weight.
The X-33/VentureStar has a Thermal Protection System (TPS) consisting mainly of brazed metallic honeycomb sandwich structures. Inspection of these structures is changing as a result of the extremely thin (less than 200 microns) skins, the small critical defect size (less than 2 mm long by 100 microns wide) and the large number (more than 1000) of parts to be inspected. Pulsed Infrared Thermography has been determined to be the most appropriate inspection method for manufacturing inspection based on performance comparison with other methods, cost, schedule and other factors. The results of the assessment of the different methods will be summarized and data on the performance of the final production inspection system will be given. Finite difference thermal methods have been used to model the whole inspection process. Details of correlation between the models and experimental data will be given and data on the use of pulsed infrared thermography on other metallic honeycomb sandwich structures will be given.
Moisture capture coupled with photothermal regeneration provides an alternative and sustainable way to acquire fresh water. Composite moisture absorbents based on hygroscopic salts are environmentally friendly, economically feasible, and of high efficiency but suffer from the unavoidable desiccant leakage during absorption and evaporation-induced salt accumulation on material surfaces during desorption. Additionally, in this study, we develop a superhydrophobic–hydrophilic–hydrophobic photothermal wood embedded with CaCl 2 to promote the durability of the absorbents. The sandwich structure serves as a liquid/vapor gate allowing vapor transport but forbidding liquid permeation, enabling the condensation and evaporation within the wood. Beyond moisture harvesting, the sandwich-structured photothermal wood exhibits potential in indoor dehumidification by pumping the moisture through an absorption–desorption cycle.
This study presents experimental results of impact and subsequent compression after impact (CAI) strength testing of sandwich structure representative of most of the acreage of a Payload Adaptor Fitting (PAF) that has been built at NASA’s Marshall Space Flight Center (MSFC). An instrumented drop weight tower was used to inflict different levels of impact damage to specimens. Load versus deflection of impact curves, visual damage, dent depth, damage as ascertained by thermography and cross-sectional microscopy were evaluated as part of the damage resistance of the structure. Compression After Impact (CAI) was performed to assess damage tolerance. The results show that at the amount of visual damage was highly dependent on whether the peel ply was present on the surface of the structure. The peel ply had some effect on the CAI strength values since the specimens with peel ply showed a 14% higher average CAI strength value. For all specimens tested in this study, CAI versus damage and CAI versus impact energy curves were plotted and it was found that damage size was a good indicator of CAI strength. It is suggested to use a b-basis damage tolerance curve based on damage size as a conservative measure of the load carrying capability of the sandwich structure with impact damage.
In this study, a direct comparison of the compression-after-impact (CAI) strength of impact-damaged, hat-stiffened and honeycomb sandwich structure for launch vehicle use was made. The specimens used consisted of small substructure designed to carry a line load of approx..3,000 lb/in. Damage was inflicted upon the specimens via drop weight impact. Infrared thermography was used to examine the extent of planar damage in the specimens. The specimens were prepared for compression testing to obtain residual compression strength versus damage severity curves. Results show that when weight of the structure is factored in, both types of structure had about the same CAI strength for a given damage level. The main difference was that the hat-stiffened specimens exhibited a multiphase failure whereas the honeycomb sandwich structure failed catastrophically.
For many composite laminated structures, the design is driven by data obtained from Compression after Impact (CAI) testing. There currently is no standard for CAI testing of sandwich structures although there is one for solid laminates of a certain thickness and lay-up configuration. Most sandwich CAI testing has followed the basic technique of this standard where the loaded ends are precision machined and placed between two platens and compressed until failure. If little or no damage is present during the compression tests, the loaded ends may need to be potted to prevent end brooming. By putting a sandwich beam in a four point bend configuration, the region between the inner supports is put under a compressive load and a sandwich laminate with damage can be tested in this manner without the need for precision machining. Also, specimens with no damage can be taken to failure so direct comparisons between damaged and undamaged strength can be made. Data is presented that demonstrates the four point bend CAI test and is compared with end loaded compression tests of the same sandwich structure.
An experimental investigation of impact-initiated failures in high-strength graphite/epoxy and Kevlar-49/epoxy sandwich structures has been conducted. The tests consisted of firing small diameter aluminum projectiles with a velocity range of 16-67 meters/second (52-220 ft/sec) at preloaded sandwich specimens. These tests were intended to be representative of service conditions on materials and structures which might be used as secondary aircraft components. The preload and impact energy necessary to initiate catastrophic failure were determined. The residual strength of impact-damaged specimens was also measured. The results of these tests indicate that catastrophic failures in sandwich structures can be initiated at relatively low preloads by impact projectiles at energy levels well below that required to initiate visible damage.
Fabrication and testing of lightweight honeycomb sandwich structures
A core for a sandwich structure which has multi-ply laminate ribs separated by voids is made as an integral unit in one single curing step. Tooling blocks corresponding to the voids are first wrapped by strips of prepreg layup equal to one half of each rib laminate so a continuous wall of prepreg material is formed around the tooling blocks. The wrapped tooling blocks are next pressed together laterally, like tiles, so adjoining walls from two tooling blocks are joined. The assembly is then cured by conventional methods, and afterwards the tooling blocks are removed so voids are formed. The ribs can be provided with integral tabs forming bonding areas for face sheets, and face sheets may be co-cured with the core ribs. The new core design is suitable for discrete ribcores used in space telescopes and reflector panels, where quasiisotropic properties and zero coefficient of thermal expansion are required.
Diffusion bonding of titanium sandwich structure for Saturn tank wall application
As part of a program examining a Payload Adaptor Fitting (PAF) for NASA’s Space Launch System (SLS), a repair study of impact damage and misdrilled holes in composite sandwich structure was undertaken.1 In that study, it was shown that small holes and barely visible impact damage (BVID) could be repaired and all the measured undamaged in-plane compression strength recovered without removing the damaged material using a simple patch repair. It was noted that for more severe damage, either larger patches or removal of damage (or both) may be necessary to regain all of the measured undamaged compression strength. This Technical Memorandum (TM) presents the results of an experimental investigation into repair of more severely damaged sandwich structure than what was studied in reference 1.
This study presents experimental results of compression after impact (CAI) strength testing of foam core sandwich structure with carbon/epoxy face sheets impacted at three different energies with either a blunt or sharp tip impactor. The impact energies used were chosen to span the barely visible impact damage (BVID) thresholds for the sharp (4.1 J) and blunt (12.9 J) impactors with an impact energy approximately halfway between these (8.1 J) also used. While most impact testing on composites utilize a hemispherical (blunt) impactor, actual damage to a part may be due to an object impacting the part that is not blunt, but sharp and the impact response and resulting CAI strength values may be different for a given impact energy level. In this study, with regards to the impact response, the sandwich specimens showed larger transverse displacements (by about a factor of two) during the impact event when impacted by a sharp impactor versus a blunt impactor. The maximum load of impact was larger for the blunt impactor by about a factor of three. The barely visible impact damage (BVID) threshold energy was lower by about a factor of three for the sharp impactor. The absorbed energy of impact was higher for the sharp impactor. The CAI strength results showed that the sharp impactor gave lower average CAI strength values at the lowest impact energy level used, slightly lower average CAI strength values for the medium impact energy used and about the same average CAI strength values for the highest impact energy used.
This study presents experimental results of compression after impact (CAI) strength testing of aluminum core sandwich structure with carbon/epoxy face sheets impacted at three different energies with either a 12.7 mm hemispherical, 24.5 mm hemispherical or sharp tip impactor. This study was undertaken to verify whether design allowables typically generated by blunt (hemispherical) impactors may be valid in ‘real world” applications where an impact may not be by a blunt object of a specific size. Results of practical interest in this study were that the visual damage was much easier to see for the sharp impactor, the damage size as detected by thermography was smaller for the sharp impactor for a given impact energy and dent depth was greater for the sharp impactor. The CAI strength results showed that the sharp impactor gave about the same CAI strength values at all three impact energy levels used. The larger hemispherical impactor gave slightly higher CAI results than the smaller blunt impactor. Overall it was deemed difficult to develop a CAI allowable that would cover all impactor shapes with any fidelity and thus using a lower bound strain allowable is suggested.
This study presents experimental results of compression after impact (CAI) and stiffness testing of aluminum honeycomb core sandwich structure with quasi-isotropic face sheets that have either been co-cured or precured (and then bonded to the core in a secondary operation). The co-cured face sheets contain some ply waviness whereas the precured face sheets did not. The effect of this waviness was ascertained for two important design parameters for the Space Launch System (SLS) Payload Adapter Fitting (PAF); compressive modulus and CAI strength. It was found that there was no effect on the modulus between co-cured and precured face sheets using the material and processes in this study. In addition, there was no difference in CAI strength behavior between the co-cured and precured face sheet.
Lightweight resin fiber glass honeycomb sandwich structure fabrication and comparison with aluminum structures for planetary probes
A core configuration was devised for a thermally insulating structural sandwich panel. Two titanium prototype panels were constructed to illustrate the proposed sandwich panel geometry. The core of one of the titanium panels was filled with Saffil(trademark) alumina fibrous insulation and the panel was tested in a series of transient thermal tests. Finite element analysis was used to predict the thermal response of the panel using one- and two-dimensional models. Excellent agreement was obtained between predicted and measured temperature histories.
As technology evolves and improves within the science of composite materials, new fiber/ resin systems are being developed for improved properties given certain loading and environmental scenarios. Improving the room temperature damage tolerance capabilities has long been one of the goals in the carbon fiber/polymer composite industry. Recently a new fiber/epoxy system has been introduced that is claimed to have superior damage tolerance capabilities. To examine if this new carbon fiber/epoxy composite material would be of benefit to a program to manufacture a Payload Adapter Fitting (PAF) for NASA’s Space Launch System (SLS) rocket, the question was asked as to just how much damage tolerance could be realized if this new system were used. Compression after impact (CAI) strength of sandwich structure is one of the leading metrics being used to evaluate materials for the PAF program. As a result, a comparison of this new fiber/resin system with a very common (and planned baseline) fiber/resin system with respect to CAI was considered in this study. While it was already known that the older, baseline carbon fiber structure would not have as good damage tolerance characteristics as the newer carbon fiber system, the quantitative difference in damage tolerance was sought in this study since no other CAI data could be found in open literature on sandwich structures made with this new fiber/resin system.
The effect of low-velocity projectile impact on the load-carrying ability of the composite sandwich structural components is investigated experimentally, the impact simulating the damage caused by runway debris and the accidental dropping of hand tools during servicing on secondary aircraft structures made with composites. The sandwich-type beam specimens were fabricated with graphite/epoxy face sheets, aluminum honeycomb core, and a steel (back) plate. A four-point beam-loading apparatus was used, and the ultimate strength, ultimate strain, and residual strength of the composites were determined. A faired curve is presented indicating the lower bound of the failure threshold for each of the laminate configurations tested in compression and tension as a function of the projectile impact energy. It is shown that strength degradation due to impact is dependent on the laminate configuration and the fiber/matrix combination. The laminates having more angle plies near the impact surface and unidirectional plies elsewhere seem to show extensive interply and intraply fiber delaminations at failure relative to the laminates with a cross-ply on the impact surface.