Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selection optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1967

Optimized Selective Coatings for Solar Collectors

The spectral reflectance properties of black nickel electroplated over stainless steel and of black copper produced by oxidation of copper sheet were measured for various plating times of black nickel and for various lengths of time of oxidation of the copper sheet, and compared to black chrome over nickel and to converted zinc. It was determined that there was an optimum time for both plating of black nickel and for the oxidation of copper black. At this time the solar selective properties show high absorptance in the solar spectrum and low emittance in the infrared. The conditions are compared for production of optimum optical properties for black nickel, black copper, black chrome, and two black zinc conversions which at the same conditions had absorptances of 0.84, 0.90, 0.95, 0.84, and 0.92, respectively, and emittances of 0.18, 0.08, 0.09, 0.10, and 0.08, respectively.

Mcdonald, G.↗
DOE OSTI2026

Optimized Gear Selection to Maximize Energy Savings in Electric Traction Drives for Medium and Heavy Duty Vehicles

Multi‑gear transmission systems are commonly used in electric traction drives for medium and heavy‑duty vehicles, while most passenger‑vehicle electric drivetrains rely on a single fixed ratio to reduce cost, weight, and complexity. Using multiple gear ratios can enable downsizing of the motor and inverter while still meeting performance requirements. Additionally, appropriately chosen ratios allow the motor to operate more frequently in high‑efficiency regions, improving overall energy usage and reducing operating costs over the drive cycle. This paper presents a systematic approach for selecting optimal gear ratios for electric drive systems. A neural‑network model is first developed to represent motor losses across the full torque–speed range using data generated from finite element analysis. This model enables fast, accurate evaluation of motor efficiency under varying operating conditions. A genetic‑algorithm‑based optimization framework is then applied to identify gear ratios that maximize energy cost savings over the drive cycle, with the resulting optimal ratios stored for real‑time implementation.

Gadiyar, Nishanth [ORNL] (ORCID:0000000348267524)↗
DOE OSTI2019

Best Practices for Wake Model and Optimization Algorithm Selection in Wind Farm Layout Optimization: Preprint

This paper presents the results of two case studies regarding the wind farm layout optimization problem. We asked a general audience to take part in the studies that we designed, and nine individuals participated. Case study 1 considered variations in optimization strategies for a given simple Gaussian wake model. Participants were provided with a wake model that outputs annual energy production (AEP) for an input set of wind turbine locations. Participants used an optimization method of their choosing to find an optimal wind farm layout. Case study 2 looked at trade-offs in performance resulting from variation in both physics model and optimization strategy. For case study 2, participants calculated AEP using a wake model of their choice while also implementing their chosen optimization method. Participants then used their wake model to calculate the AEP all other participant submitted turbine configurations produce for cross-comparison results. for optimized turbine locations were then cross-compared by recalculating the AEP using every other participant's wake model. Results for case study 1 show that the best optimal wind farm layouts in this study were achieved by participants who used gradient-based optimization methods. A front-runner emerged with the Sparse Nonlinear OPTimizer plus Wake Expansion Continuation (SNOPTplusWEC) optimization method, which consistently discovered a higher AEP for each scenario. Results for case study 2 show that for small wind farms with few turbines, turbine placement on the wind farm boundary is superior. Conclusions for case study 2 were drawn from participant cross-comparison of results.

17 WIND ENERGY↗
DOE OSTI2019

Best Practices for Wake Model and Optimization Algorithm Selection in Wind Farm Layout Optimization

This paper presents the results of two case studies regarding the wind farm layout optimization problem. We asked a general audience to take part in the studies that we designed, and nine individuals participated. Case study 1 considered variations in optimization strategies for a given simple Gaussian wake model. Participants were provided with a wake model that outputs annual energy production (AEP) for an input set of wind turbine locations. Participants used an optimization method of their choosing to find an optimal wind farm layout. Case study 2 looked at trade-offs in performance resulting from variation in both physics model and optimization strategy. For case study 2, participants calculated AEP using a wake model of their choice while also implementing their chosen optimization method. Participants then used their wake model to calculate the AEP all other participant submitted turbine configurations produce for cross-comparison results. for optimized turbine locations were then cross-compared by recalculating the AEP using every other participant's wake model. Results for case study 1 show that the best optimal wind farm layouts in this study were achieved by participants who used gradient-based optimization methods. A front-runner emerged with the Sparse Nonlinear OPTimizer plus Wake Expansion Continuation (SNOPTplusWEC) optimization method, which consistently discovered a higher AEP for each scenario. Results for case study 2 show that for small wind farms with few turbines, turbine placement on the wind farm boundary is superior. Conclusions for case study 2 were drawn from participant cross-comparison of results.

17 WIND ENERGY↗
DOE OSTI2023

BOOTS: Bayesian Optimization for Optimal Test Selection

BOOTS is a package for optimal selection of candidate operating points in large-scale manufacturing applications. It is designed to optimally select operating points to maximize predicted values of product quality and resource efficiency according to a data-driven model. The package is based on the use of a multi-input multi-output (MIMO) Gaussian process model to describe the relationships between inputs (operating points) and outputs (product quality and resource efficiency). This package does not provide any site- or process-specific information.

Villez, Kris [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2018

Pareto Optimal Spectrally Selective Emitters for Thermophotovoltaics via Weak Absorber Critical Coupling

Tailoring the emission spectra of a thermophotovoltaic (TPV) emitter away from that of a blackbody has the potential to minimize transmission and thermalization loss in a photovoltaic receiver. Selective TPV emitters can lead to solar energy conversion with efficiency greater than the Shockley-Queisser limit and can facilitate the generation of useful energy from waste heat. A new design is introduced to radically tune thermal emission that leverages the interplay between two resonant phenomena in simple planar nanostructures-absorption in weakly absorbing nanofilms and reflection in multilayer dielectric stacks. A virtual screening approach is employed to identify promising structures for a selective thermal emitter from a search space of millions, several of which approach the ideal values of a step-function selective thermal emitter. One of these structures is experimentally fabricated and evaluated, which includes a weakly absorbing alloy with tailored optical properties fabricated by atomic layer deposition (ALD). The versatility of the design and fabrication approach result in an emitter with excellent spectral density (0.8 W cm(-2) sr(-1)) and spectral efficiency (46.8%) at 1373 K. Future experimental challenges to a more accurate realization of the optimal structures calculated are also considered.

atomic layer deposition↗
DOE OSTI2020

Optimal Orbital Selection for Full Configuration Interaction (OptOrbFCI): Pursuing the Basis Set Limit under a Budget

Full configuration interaction (FCI) solvers are limited to small basis sets due to their expensive computational costs. An optimal orbital selection for FCI (OptOrbFCI) is proposed to boost the power of existing FCI solvers to pursue the basis set limit under a computational budget. The optimization problem coincides with that of the complete active space SCF method (CASSCF), while OptOrbFCI is algorithmically quite different. OptOrbFCI effectively finds an optimal rotation matrix via solving a constrained optimization problem directly to compress the orbitals of large basis sets to one with a manageable size, conducts FCI calculations only on rotated orbital sets, and produces a variational ground-state energy and its wave function. Coupled with coordinate descent full configuration interaction (CDFCI), we demonstrate the efficiency and accuracy of the method on the carbon dimer and nitrogen dimer under basis sets up to cc-pV5Z. We also benchmark the binding curve of the nitrogen dimer under the cc-pVQZ basis set with 28 selected orbitals, which provide consistently lower ground-state energies than the FCI results under the cc-pVDZ basis set. Furthermore, the dissociation energy in this case is found to be of higher accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimal band selection for target detection with a LWIR multispectral imager

Multispectral imaging can offer many benefits in cost, complexity, resolution, size, weight, and power, relative to hyperspectral imaging. When designing a multispectral system, spectral bandpasses can be selected using optimization algorithms configured to maximally separate target detection scores between target and background regions. A hyperspectral image (HSI) can serve as the source of data from which band groupings can be tested for optimality. The output of an adaptive cosine estimator target detection algorithm is used in an objective function. Three optimization algorithms are compared: particle swarm, dual annealing, and differential evolution. A global optimum is also found using a brute force approach on the Livermore Computing Syrah supercomputer. Three materials are investigated: calcite, gypsum, and limestone. This is done for 3-, 4-, and 5-band systems. The data originate from a longwave infrared HSI of a material display board. The optimization algorithms were run 30 times for every scenario. Performance statistics (maximum, minimum, mean, standard deviation, and median) based on the separation values are given. Additional characterization was performed using receiver operator characteristic (ROC) curves and the area under the ROC curve. While good performance was obtained for the three optimization algorithms, the dual annealing algorithm produced the highest and most consistent detection separation scores on average.

47 OTHER INSTRUMENTATION↗
NASA NTRS2005

Optimal Sensor Selection for Health Monitoring Systems

Sensor data are the basis for performance and health assessment of most complex systems. Careful selection and implementation of sensors is critical to enable high fidelity system health assessment. A model-based procedure that systematically selects an optimal sensor suite for overall health assessment of a designated host system is described. This procedure, termed the Systematic Sensor Selection Strategy (S4), was developed at NASA John H. Glenn Research Center in order to enhance design phase planning and preparations for in-space propulsion health management systems (HMS). Information and capabilities required to utilize the S4 approach in support of design phase development of robust health diagnostics are outlined. A merit metric that quantifies diagnostic performance and overall risk reduction potential of individual sensor suites is introduced. The conceptual foundation for this merit metric is presented and the algorithmic organization of the S4 optimization process is described. Representative results from S4 analyses of a boost stage rocket engine previously under development as part of NASA's Next Generation Launch Technology (NGLT) program are presented.

Santi, L. Michael↗
DOE OSTI2023

Assessing the Optimality of LinDist3Flow for Optimal Tap Selection of Step Voltage Regulators in Unbalanced Distribution Networks

The adoption of distributed energy resources such as photovoltaics (PVs) has increased dramatically during the previous decade. The increased penetration of PVs into distribution networks (DNs) can cause voltage fluctuations that have to be mitigated. One of the key utility assets employed to this end are step-voltage regulators (SVRs). It is desirable to include tap selection of SVRs in optimal power flow (OPF) routines, a task that turns out to be challenging because the resultant OPF problem is nonconvex with added complexities stemming from accurate SVR modeling. While several convex relaxations based on semi-definite programming (SDP) have been presented in the literature for optimal tap selection, SDP based schemes do not scale well and are challenging to implement in large-scale planning or operational frameworks. This paper deals with the optimal tap selection (OPTS) problem for wye-connected SVRs using linear approximations of power flow equations. Specifically, the LinDist3Flow model is adopted and the effective SVR ratio is assumed to be continuous- enabling the formulation of a problem called LinDist3Flow-OPTS, which amounts to a linear program. The scalability and optimality gap of LinDist3Flow-OPTS are evaluated with respect to existing SDP-based and nonlinear programming techniques for optimal tap selection in three standard feeders, namely, the IEEE 13-bus, 123-bus, and 8500-node DNs. For all DNs considered, LinDist3Flow-OPTS achieves an optimality gap of approximately 1% or less while significantly lowering the computational burden.

linear approximations↗
DOE OSTI2022

Assessing the Optimality of LinDist3Flow for Optimal Tap Selection of Step Voltage Regulators in Unbalanced Distribution Networks: Preprint

The adoption of distributed energy resources such as photovoltaics (PVs) has increased dramatically during the previous decade. The increased penetration of PVs into distribution networks (DNs) can cause voltage fluctuations that have to be mitigated. One of the key utility assets employed to this end are step-voltage regulators (SVRs). It is desirable to include tap selection of SVRs in optimal power flow (OPF) routines, a task that turns out to be challenging because the resultant OPF problem is nonconvex with added complexities stemming from accurate SVR modeling. While several convex relaxations based on semi-definite programming (SDP) have been presented in the literature for optimal tap selection, SDP based schemes do not scale well and are challenging to implement in large-scale planning or operational frameworks. This paper deals with the optimal tap selection (OPTS) problem for wye-connected SVRs using linear approximations of power flow equations. Specifically, the LinDist3Flow model is adopted and the effective SVR ratio is assumed to be continuous–enabling the formulation of a problem called LinDist3Flow-OPTS, which amounts to a linear program. The scalability and optimality gap of LinDist3Flow-OPTS are evaluated with respect to existing SDP-based and nonlinear programming techniques for optimal tap selection in three standard feeders, namely, the IEEE 13-bus, 123-bus, and 8500-node DNs. For all DNs considered, LinDist3Flow-OPTS achieves an optimality gap of approximately 1% or less while significantly lowering the computational burden.

linear approximations↗
DOE OSTI2023

Noise Optimization for MKIDs with Different Design Geometries and Material Selections

The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielectric layer, the generation-recombination noise intrinsic to the superconducting thin-film, and system white noise from each detector noise power spectrum and characterize how these noise components depend on detector geometry, material, and measurement conditions such as driving power and temperature. We observe a reduction in the amplitude of two-level system noise with both an elevated sample temperature and an increased gap between the fingers within the interdigitated capacitors for both aluminum and niobium detectors. We also verify the expected reduction of the generation-recombination noise and associated quasiparticle lifetime with reduced inductor volume. This study also iterates over different materials, including aluminum, niobium, and aluminum manganese, and compares the results with an underlying physical model.

generation-recombination noise↗
NASA NTRS1987

Selection for optimal crew performance - Relative impact of selection and training

An empirical study supporting Helmreich's (1986) theoretical work on the distinct manner in which training and selection impact crew coordination is presented. Training is capable of changing attitudes, while selection screens for stable personality characteristics. Training appears least effective for leadership, an area strongly influenced by personality. Selection is least effective for influencing attitudes about personal vulnerability to stress, which appear to be trained in resource management programs. Because personality correlates with attitudes before and after training, it is felt that selection may be necessary even with a leadership-oriented training cirriculum.

Chidester, Thomas R.↗
DOE OSTI2019

A biomimetic approach to fast selection of optimal controlled variables using multiagent algorithms and a decomposition approach

Selection of primary controlled variables (CVs) with due consideration of economic loss and ease of control is an important step for achieving optimal plant operation under design and off-design conditions. However, the computational expense of the combinatorial optimization step that is undertaken for CV selection renders the existing approaches unaffordable for fast selection of optimal CVs. Two approaches are proposed in this paper for improving the computational efficiency of the optimization step. Typically, the CV selection process is typically executed by considering the entire plant together. Opposed to that, the first approach proposed here seeks to decompose the process plant into multiple partitions based on the connectivity strength. Then the CV selection algorithm can be executed on each partition independently. The decomposition algorithm is biomimetic and has been developed, in analogy to neuroscience, mimicking how the information about the connectivity information is extracted using a dynamic casual model. This approach can significantly decrease the number of combinatorial optimization problems that needs to be solved and facilitates parallelization of the solution. In the second approach, a multiagent optimization framework is proposed that utilizes metaheuristic optimization strategies such as the efficient ant colony algorithm, simulated annealing and the genetic algorithm. These two approaches can be used by themselves or in combination. This framework enables cooperative search by a group of algorithmic agents facilitated through an information sharing protocol. These two approaches are applied to a toy problem and an acid gas removal unit as part of an integrated gasification combined cycle. This study shows how the computational time and economic and control performance of the optimal CV sets vary as the number of partitions are changed.

42 ENGINEERING↗