Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sequential polymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Morphological Phase Behavior of Poly(RTIL)-Containing Diblock Copolymer Melts

The development of nanostructured polymeric systems containing directionally continuous poly(ionic liquid) (poly(IL)) domains has considerable implications toward a range of transport-dependent, energy-based technology applications. The controlled, synthetic integration of poly(IL)s into block copolymer (BCP) architectures provides a promising means to this end, based on their inherent ability to self-assemble into a range of defined, periodic morphologies. In this work, we report the melt-state phase behavior of an imidazolium-containing alkyl-ionic BCP system, derived from the sequential ring-opening metathesis polymerization (ROMP) of imidazolium- and alkyl-substituted norbornene monomer derivatives. A series of 16 BCP samples were synthesized, varying both the relative volume fraction of the poly(norbornene dodecyl ester) block (f{sub DOD} = 0.42-0.96) and the overall molecular weights of the block copolymers (M{sub n} values from 5000-20,100 g mol{sup -1}). Through a combination of small-angle X-ray scattering (SAXS) and dynamic rheology, we were able to delineate clear compositional phase boundaries for each of the classic BCP phases, including lamellae (Lam), hexagonally packed cylinders (Hex), and spheres on a body-centered-cubic lattice (S{sub BCC}). Additionally, a liquid-like packing (LLP) of spheres was found for samples located in the extreme asymmetric region of the phase diagram, and a persistent coexistence of Lam and Hex domains was found in lieu of the bicontinuous cubic gyroid phase for samples located at the intersection of Hex and Lam regions. Thermal disordering was opposed even in very low molecular weight samples, detected only when the composition was highly asymmetric (f{sub DOD} = 0.96). Annealing experiments on samples exhibiting Lam and Hex coexistence revealed the presence of extremely slow transition kinetics, ultimately selective for one or the other but not the more complex gyroid phase. In fact, no evidence of the bicontinuous network was detected over a 2 month annealing period. The ramifications of these results for transport-dependent applications targeting the use of highly segregated poly(IL)-containing BCP systems are carefully considered.

36 MATERIALS SCIENCE↗

Functional DNA Delivery Enabled by Lipid-Modified Charge-Altering Releasable Transporters (CARTs)

Safe and effective DNA delivery systems are required to enable or enhance clinical strategies and research involving gene therapy and DNA vaccinations. To address this delivery problem, a series of charge-altering releasable transporters (CARTs) with varied lipid content were prepared and evaluated for plasmid DNA (pDNA) delivery into cultured cells. These lipid-modified CART co-oligomers were synthesized in only two steps via sequential organocatalytic ring-opening polymerization of lipid-containing cyclic carbonate monomers and morpholinone monomers. Lipid variations of the CARTs substantially impacted the delivery efficiency of pDNA, with oleyl- and linoleyl-based CARTs showing enhanced performance relative to the commercial transfection agent Lipofectamine 2000 (L2000). The best-performing oleyl CART was carried forward to study stable luciferase transfection with a Sleeping Beauty (SB) transposon system. The oleyl CART outperformed the L2000 positive control with respect to stable transfection efficiency. CART-pDNA complexes represent a new DNA delivery system for research and clinical applications.

59 BASIC BIOLOGICAL SCIENCES↗

Design of Graft Block Polymer Thermoplastics

Graft block polymers are defined by several architectural parameters, including backbone flexibility, graft density, backbone length, side-chain composition, and side-chain length. In this work we probe the impacts of each of these parameters on the phase behavior, rheological properties, and mechanical performance of these materials. Specifically, we examine two sets of materials prepared from backbones of different inherent flexibility. One set was prepared from poly[(n-butyl acrylate)-co-(2-hydroxyethyl acrylate)] (B$_x$E$_y$) copolymers; the other was prepared from hydroxypropyl methyl cellulose (HPMC) samples. Sequential ring-opening transesterification polymerization from these hydroxyl-functionalized macroinitiatiors yielded a diblock graft architecture containing a rubbery interior block and semicrystalline exterior blocks tethered to a flexible (B$_x$E$_y$) or rigid (HPMC) backbone. Good control over side-chain molar mass and composition and judicious choice of the graft block segments enabled the preparation of materials that were either ordered or disordered in the melt state. In the former case, crystallization destroys existing order in the material; in the latter case crystallization induces new microphase separation in the bulk. Many of the structure–mechanical property relationships observed for graft block copolymers with rigid backbones are maintained for graft block polymers with semiflexible backbones, including the tendency for samples to remain transparent when stretched. However, interestingly, we note the effects of graft density and backbone length are quite different depending on the rigidity of the backbone.

36 MATERIALS SCIENCE↗

Polylactide-Poly(6-methyl-ε-caprolactone)-Polylactide Thermoplastic Elastomers

Amorphous ABA type block aliphatic polyesters can be useful as degradable and biorenewable thermoplastic elastomers. These materials can be prepared by sequential ring-opening transesterification polymerization (ROTEP) reactions and can exhibit a range of physical properties and morphologies. In this work a set of amorphous polylactide-poly(6-methyl-ε-caprolactone)-polylactide aliphatic polyester ABA triblock copolymers were prepared by consecutive controlled ring-opening polymerizations. Ring-opening polymerization of neat 6-methyl-ε-caprolactone in the presence of 1,4-benzenedimethanol and tin(II) octoate afforded α,ω-hydroxyl-terminated poly(6-methyl-ε-caprolactone). High conversions of 6-methyl-ε-caprolactone (>96%) afforded polymers with molar masses ranging from 12 to 98 kg mol -1 , depending on monomer-to-initiator ratios, polymers with narrow, monomodal molecular weight distributions. An array of polylactide-poly(6-methyl-ε-caprolactone)-polylactide triblock copolymers with controlled molecular weights and narrow molecular weight distributions were synthesized using the telechelic poly(6-methyl-ε-caprolactone) samples as macroinitiators for the ring-opening polymerization of D,L-lactide. The morphological, thermal, and mechanical behaviors of these materials were explored. Several triblocks adopted well-ordered microphase-separated morphologies, and both hexagonally packed cylindrical and lamellar structures were observed. The Flory-Huggins interaction parameter was determined, x(T) = 61.2 T -1 - 0.1, based on the order-to-disorder transition temperatures of two symmetric triblocks using the calculated mean field theory result. The elastomeric mechanical behavior of two high molecular weight triblocks was characterized by tensile and elastic recovery experiments.

36 MATERIALS SCIENCE↗

Imidazolium-containing, hydrophobic-ionic-hydrophilic ABC triblock copolymers: synthesis, ordered phase-separation, and supported membrane fabrication

Novel ABC triblock copolymers containing hydrophobic, imidazolium ionic liquid (IL)-based ionic, and non-charged hydrophilic blocks were synthesized by direct sequential, ring-opening metathesis polymerization (ROMP) of three chemically immiscible norborene monomers. The resulting ABC triblock copolymers were found by small-angle X-ray scattering to phase-separate into different nanostructures in their pure melt states, depending on their block sequence and compositions. Supported composite membranes of these triblock copolymers were successfully fabricated with defect-free, <= 20 microns thick top coatings. Preliminary CO2/light gas transport studies demonstrated the potential of this new type of IL-based block copolymer material for gas separation applications.

Wiesenauer, EF↗

Synthesis, Characterization (Molecular-Morphological) and Theoretical Morphology Predictions of Poly(cyclohexadiene) Containing Linear Triblock Terpolymers

The synthesis via anionic polymerization of six linear triblock terpolymers with various sequences of blocks such as PS (polystyrene), PB (polybutadiene), PI (polyisoprene) and PCHD (poly(1,3-cyclohexadiene)) is reported. The synthesis of the terpolymers was accomplished by the use of anionic polymerization with high vacuum techniques and sequential monomer addition. Molecular characterization of the samples was performed via size exclusion chromatography and membrane osmometry to measure polydispersity indices and the number-average molecular weights, respectively. Proton nuclear magnetic resonance spectroscopy was adopted to verify the type of microstructure for the polydienes as well as to calculate the molar composition. Structural characterization was performed via transmission electron microscopy and small angle X-ray scattering and several morphologies were observed including one which has not been reported previously. Real-space self-consistent field theory (SCFT) without a priori knowledge about the symmetry of the periodic structures was used to elucidate the thermodynamics of the synthesized triblock copolymers.

Kumar, Rajeev↗

Fundamental investigations into the free‐radical copolymerization of N ‐phenylmaleimide and norbornene

ABSTRACT A fundamental investigation into the copolymerization of N ‐phenylmaleimide and norbornene via conventional free‐radical polymerization techniques was conducted. Reaction conditions were optimized for molecular weight and percent yield by tuning overall concentration and initiator loading. The copolymerization kinetics were monitored using in‐situ , variable temperature nuclear magnetic resonance and first‐order behavior was observed with respect to each monomer. Although the related copolymerization of norbornene and maleic anhydride was well‐known to proceed in a perfectly alternating manner, the copolymerization of norbornene and N ‐phenylmaleimide was found to deviate from strictly alternating copolymerization behavior, producing significant amounts of sequentially enchained N ‐phenylmaleimide units within the polymeric backbone. This deviation from perfectly alternating behavior was confirmed by analysis of individual monomer conversion rates and by measurement of monomer reactivity ratios using the Mayo–Lewis graphical analysis method. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54 , 985–991

Gmernicki, Kevin R.↗

Synthesis, characterization (molecular–morphological) and theoretical morphology predictions of linear triblock terpolymers containing poly(cyclohexadiene)

The synthesis via anionic polymerization of six linear triblock terpolymers with various sequences of blocks such as PS (polystyrene), PB [poly(butadiene)], PI [(poly(isoprene)] and PCHD [poly(1,3-cyclohexadiene)] is reported. The synthesis of the terpolymers was carried out by the use of anionic polymerization with high-vacuum techniques and sequential monomer addition. Molecular characterization of the samples was performed via size exclusion chromatography (SEC) and membrane osmometry (MO) to measure the polydispersity indices and the number-average molecular weights, respectively. Proton nuclear magnetic resonance spectroscopy (1H NMR) was employed to verify the microstructure type for the polydienes, as well as, to calculate the molar composition. Structural characterization of the terpolymers was performed via transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS), and several morphologies were observed including one which has not been reported previously. Real-space self-consistent field theory (SCFT) without a priori knowledge about the symmetry of the periodic structures was used to elucidate the thermodynamics of the synthesized triblock copolymers.

Polymer Science↗

Synthesis and Melt Self-Assembly of PS-PMMA-PLA Triblock Bottlebrush Copolymers

Polystyrene–poly(methyl methacrylate)–polylactide (PS–PMMA–PLA) triblock bottlebrush copolymer with nearly symmetric volume fractions was synthesized by grafting from a symmetrical triblock backbone and the resulting melt was characterized by scanning electron microscopy and small-angle X-ray scattering. The copolymer backbone was prepared by sequential reversible addition–fragmentation chain transfer (RAFT) polymerization of solketal methacrylate (SM), 2-(bromoisobutyryl)ethyl methacrylate (BIEM), and 5-(trimethylsilyl)-4-pentyn-1-ol methacrylate (TPYM). PMMA branches were grafted by atom transfer radical polymerization from the poly(BIEM) segment, PS branches were grafted by RAFT polymerization from the poly(TPYM) block after installment of the RAFT agents, while PLA side chains were grafted from the deprotected poly(SM) block. The resulting copolymer was found to exhibit a lamellae morphology with a domain spacing of 79 nm. Differential scanning calorimetry analysis indicated that PMMA was preferentially mixing with PS while phase separating from PLA domains.

Bolton, Justin↗

Compressible foam electrode

A foam electrode comprising surface treatment by the steps of: 1) impregnating soft compressible polymeric foams with a conductive coating via sequential infiltration synthesis and 2) functionalizing the chemically altered voids with an ultrathin redox coating to enhance capacitive deionization (CDI). The redox coating will allow treated foam to absorb ions under the application of a bias, and mechanical compression/decompression. The CDI apparatus uses the void volume of the foam in the uncompressed state to flow liquids through it while the compressed state is used to enhance desalination by limiting the diffusion pathways for the ions to find an adsorption surface.

Young, Matthias John↗

Aqueous Self‐Assembly of Cylindrical and Tapered Bottlebrush Block Copolymers

The self‐assembly of amphiphilic bottlebrush block copolymers (BCPs), featuring backbones densely grafted with two types of side chains, is less well understood compared to linear BCPs. In particular, the solution self‐assembly of tapered bottlebrush BCPs—cone‐shaped BCPs with hydrophilic or hydrophobic tips—remains unexplored. This study investigates eight tapered and four cylindrical bottlebrush BCPs with varied ratios of hydrophobic polystyrene (PS) and hydrophilic poly(acrylic acid) (PAA) side chains, synthesized via sequential addition of macromonomers using ring‐opening metathesis polymerization (SAM‐ROMP). Self‐assembled nanostructures formed in water were analyzed using cryogenic transmission electron microscopy, small‐angle neutron scattering, and dynamic light scattering. Most BCPs generated multiple nanostructures with surface protrusions, including spherical micelles, cylindrical micelles, and vesicles, alongside transitional forms like ellipsoids and semi‐vesicles. Coarse‐grained molecular dynamics simulations supported the experimental findings, which revealed two distinct self‐assembly pathways. The first involved micelle fusion, producing elliptical and cylindrical aggregates, sometimes forming Y‐junctions. The second pathway featured micelle maturation into semivesicles, which developed into vesicles or large compound vesicles. This work provides the first experimental evidence of vesicle formation via semivesicles in bottlebrush BCPs and demonstrates the significant influence of cone directionality on self‐assembly behavior in these cone‐shaped polymeric amphiphiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoreversible and Injectable ABC Polypeptoid Hydrogels: Controlling the Hydrogel Properties through Molecular Design

Here, a series of ABC triblock copolypeptoids [i.e., poly( N -allyl glycine)- b -poly( N -methyl glycine)-b-poly( N -decyl glycine) (AMD)] with well-defined structure and varying composition have been synthesized by sequential primary amine-initiated ring-opening polymerization of the corresponding N-substituted N -carboxyanhydride monomers (Al-NCA, Me-NCA, and De-NCA). The ABC block copolypeptoids undergo sol-to-gel transitions with increasing temperature in water and biological media at low concentrations (2.5–10 wt %). The sol–gel transition is rapid and fully reversible with a narrow transition window, evidenced by the rheological measurements. The gelation temperature ( T gel ) and mechanical stiffness of the hydrogels are highly tunable: T gel in the 26.2–60.0 °C range, the storage modulus (G') and Young’s modulus ( E ) in the 0.2–780 Pa and 0.5–2346 Pa range, respectively, at the physiological temperature (37 °C) can be readily accessed by controlling the block copolypeptoid composition and the polymer solution concentration. The hydrogel is injectable through a 24 gauge syringe needle and maintains their shape upon in contact with surfaces or water baths that are kept above the sol–gel transition temperature. The hydrogels exhibit minimal cytotoxicity toward human adipose derived stem cells (hASCs), evidenced from both alamarBlue and PicoGreen assays. Furthermore, quantitative PCR analysis revealed significant up-regulation of the Col2a1 gene and down-regulation of ANGPT1 gene, suggesting that the hydrogel exhibit biological activity in inducing chondrogenesis of hASCs. It was also demonstrated that the hydrogel can be used to quantitatively encapsulate water-soluble enzymes (e.g., horseradish peroxidase) by manipulating the sol–gel transition. The enzymatic activity of HRP remain unperturbed after encapsulation at 37 °C for up to 7 d, suggesting that the hydrogel does not adversely affect the enzyme structure and thereby the enzymatic activity. These results suggest that the polypeptoid hydrogel a promising synthetic platform for tissue engineering or protein storage applications.

36 MATERIALS SCIENCE↗

Solution Structure and Scaling Laws of Cylindrical and Tapered Bottlebrush Polymers

Bottlebrush polymers are a unique class of macromolecular architectures with a plethora of potential industrial and pharmaceutical applications that critically depend on the bottlebrush shape and dimensions. Here, a systematic series of 12 cylindrical and 12 cone-shaped (tapered) bottlebrush polymers with poly(tert-butyl acrylate) (PtBA) or polystyrene (PS) side chains were synthesized using the sequential addition of macromonomers ring-opening metathesis polymerization (SAM-ROMP) grafting-through method. Small-angle neutron scattering (SANS) studies on dilute solutions of the two types of bottlebrush polymers provided noninvasive characterization of their structural dimensions and chain conformations. Simulated SANS traces, generated using coarse-grained molecular dynamics simulations, reproduced the distinctive features observed in the experimental SANS signals and provided necessary validation for data modeling. The combined analysis of experimental and simulated SANS signals yielded key structural and conformational parameters, including the bottlebrush radius, length, and Kuhn length as well as the excluded volume parameter and the correlation length of the polymer side chains. Importantly, the obtained structural parameters followed well-defined scaling laws as a function of the backbone and side chain degrees of polymerization, as predicted by mean field theories. In conclusion, these findings provide clear experimental and computational evidence of the interdependence of structural and conformational properties in an important class of polymer architectures.

36 MATERIALS SCIENCE↗

The Frontiers of Additive Manufacturing

Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

36 MATERIALS SCIENCE↗

Comparison of solution-mixed and sequentially processed P3HT: F4TCNQ films: effect of doping-induced aggregation on film morphology

Doping polymeric semiconductors often drastically reduces the solubility of the polymer, leading to difficulties in processing doped films. Here, we compare optical, electrical, and morphological properties of P3HT films doped with F4TCNQ, both from mixed solutions and using sequential solution processing with orthogonal solvents. We demonstrate that sequential doping occurs rapidly (<1 s), and that the film doping level can be precisely controlled by varying the concentration of the doping solution. Furthermore, the choice of sequential doping solvent controls whether dopant anions are included or excluded from polymer crystallites. Atomic force microscopy (AFM) reveals that sequential doping produces significantly more uniform films on the nanoscale than the mixed-solution method. In addition, we show that mixed-solution doping induces the formation of aggregates even at low doping levels, resulting in drastic changes to film morphology. Sequentially coated films show 3–15 times higher conductivities at a given doping level than solution-doped films, with sequentially doped films processed to exclude dopant anions from polymer crystallites showing the highest conductivities. In conclusion, we propose a mechanism for doping induced aggregation in which the shift of the polymer HOMO level upon aggregation couples ionization and solvation energies. To show that the methodology is widely applicable, we demonstrate that several different polymer:dopant systems can be prepared by sequential doping.

14 SOLAR ENERGY↗