Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simplifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Modeling and model simplification of aeroelastic vehicles

The rigid-body degrees of freedom and elastic degrees of freedom of aeroelastic vehicles are typically treated separately in dynamic analysis. Such a decoupling, however, is not always justified and modeling assumptions that imply decoupling must be used with caution. The frequency separation between the rigid-body and elastic degrees of freedom for advanced aircraft may no longer be sufficient to permit the typical treatment of the vehicle dynamics. Integrated, elastic vehicle models must be developed initially and simplified in a manner appropriate to and consistent with the intended application. This paper summarizes key results from the research aimed at developing and implementing integrated aeroelastic vehicle models for flight controls analysis and design. Three major areas will be addressed: (1) the accurate representation of the dynamics of aeroelastic vehicles, (2) properties of several model simplification methods, and (3) the importance of understanding the physics of the system being modeled and of having a model which exposes the underlying physical causes for critical dynamic characteristics.

Waszak, Martin R.↗
NASA NTRS1991

Simplification of the Kalman filter for meteorological data assimilation

The paper proposes a new statistical method of data assimilation that is based on a simplification of the Kalman filter equations. The forecast error covariance evolution is approximated simply by advecting the mass-error covariance field, deriving the remaining covariances geostrophically, and accounting for external model-error forcing only at the end of each forecast cycle. This greatly reduces the cost of computation of the forecast error covariance. In simulations with a linear, one-dimensional shallow-water model and data generated artificially, the performance of the simplified filter is compared with that of the Kalman filter and the optimal interpolation (OI) method. The simplified filter produces analyses that are nearly optimal, and represents a significant improvement over OI.

Dee, Dick P.↗
NASA NTRS1992

Modeling and model simplification of aeroelastic vehicles: An overview

The rigid-body degrees of freedom and elastic degrees of freedom of aeroelastic vehicles are typically treated separately in dynamic analysis. Such a decoupling, however, is not always justified and modeling assumptions that imply decoupling must be used with caution. The frequency separation between the rigid-body and elastic degrees of freedom for advanced aircraft may no longer be sufficient to permit the typical treatment of the vehicle dynamics. Integrated, elastic vehicle models must be developed initially and simplified in a manner appropriate to and consistent with the intended application. This paper summarizes key results from past research aimed at developing and implementing integrated aeroelastic vehicle models for flight controls analysis and design. Three major areas will be addressed: (1) the accurate representation of the dynamics of aeroelastic vehicles, (2) properties of several model simplification methods, and (3) the importance of understanding the physics of the system being modeled and of having a model which exposes the underlying physical causes for critical dynamic characteristics.

Waszak, Martin R.↗
NASA NTRS1997

Automated Simplification of Full Chemical Mechanisms

A code has been developed to automatically simplify full chemical mechanisms. The method employed is based on the Intrinsic Low Dimensional Manifold (ILDM) method of Maas and Pope. The ILDM method is a dynamical systems approach to the simplification of large chemical kinetic mechanisms. By identifying low-dimensional attracting manifolds, the method allows complex full mechanisms to be parameterized by just a few variables; in effect, generating reduced chemical mechanisms by an automatic procedure. These resulting mechanisms however, still retain all the species used in the full mechanism. Full and skeletal mechanisms for various fuels are simplified to a two dimensional manifold, and the resulting mechanisms are found to compare well with the full mechanisms, and show significant improvement over global one step mechanisms, such as those by Westbrook and Dryer. In addition, by using an ILDM reaction mechanism in a CID code, a considerable improvement in turn-around time can be achieved.

Norris, A. T.↗
NASA NTRS2003

Strategy-Enhanced Interactive Proving and Arithmetic Simplification for PVS

We describe an approach to strategy-based proving for improved interactive deduction in specialized domains. An experimental package of strategies (tactics) and support functions called Manip has been developed for PVS to reduce the tedium of arithmetic manipulation. Included are strategies aimed at algebraic simplification of real-valued expressions. A general deduction architecture is described in which domain-specific strategies, such as those for algebraic manipulation, are supported by more generic features, such as term-access techniques applicable in arbitrary settings. An extended expression language provides access to subterms within a sequent.

diVito, Ben L.↗
NASA NTRS2003

Strategy-Enhanced Interactive Proving and Arithmetic Simplification for PVS

We describe an approach to strategy-based proving for improved interactive deduction in specialized domains. An experimental package of strategies (tactics) and support functions called Manip has been developed for PVS to reduce the tedium of arithmetic manipulation. Included are strategies aimed at algebraic simplification of real-valued expressions. A general deduction architecture is described in which domain-specific strategies, such as those for algebraic manipulation, are supported by more generic features, such as term-access techniques applicable in arbitrary settings. An extended expression language provides access to subterms within a sequent.

DiVito, Ben L.↗
DOE OSTI2021

Simplification of the purification of heat stable recombinant low molecular weight proteins and peptides from GST-fusion products

The synthesis and purification of peptides of importance in the fields of research and medicine continue to be a challenging task. Chemical synthesis of oligopeptides, especially those greater than 25 amino acids, is cost prohibitive. On the other hand, several bottlenecks exist in the production of recombinant short peptides in heterologous expression hosts such as Escherichia coli (E. coli). In this paper, a rapid, cost-effective, and reliable method for the production and singlestep-purification of peptides and small proteins was developed. Five peptides and small proteins were overexpressed in E. coli as GST-fusion products in high yields. The recombinant peptides or proteins were successfully purified after enzymatic cleavage with selective heat-induced precipitation of the GST-affinity tag. Qualitative and quantitative analysis using SDS-PAGE and mass spectrometric methods suggest that the recombinant peptides/ proteins were purified to >95% homogeneity. Results of biophysical experiments, including multi-dimensional NMR spectroscopy, show that the purified proteins/ peptides retain their native conformation. Isothermal titration calorimetry studies indicate no significant change in the binding affinity of the heattreated purified product to their interacting partner(s) compared to the recombinant peptides purified by conventional chromatographic procedures without subjecting to heat treatment. In our opinion, the results reported render the purification of recombinant proteins/ peptides of biomedical relevance using our proposed method easy and reliable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Increasing Functional Diversity in a Global Land Surface Model Illustrates Uncertainties Related to Parameter Simplification

Abstract Simulations of the land surface carbon cycle typically compress functional diversity into a small set of plant functional types (PFT), with parameters defined by the average value of measurements of functional traits. In most earth system models, all wild plant life is represented by between five and 14 PFTs and a typical grid cell (≈100 × 100 km) may contain a single PFT. Model logic applied to this coarse representation of ecological functional diversity provides a reasonable proxy for the carbon cycle, but does not capture the non‐linear influence of functional traits on productivity. Here we show through simulations using the Energy Exascale Land Surface Model in 15 diverse terrestrial landscapes, that better accounting for functional diversity markedly alters predicted total carbon uptake. The shift in carbon uptake is as great as 30% and 10% in boreal and tropical regions, respectively, when compared to a single PFT parameterized with the trait means. The traits that best predict gross primary production vary based on vegetation phenology, which broadly determines where traits fall within the global distribution. Carbon uptake is more closely associated with specific leaf area for evergreen PFTs and the leaf carbon to nitrogen ratio in deciduous PFTs.

58 GEOSCIENCES↗
DOE OSTI2020

A Comfort Model Simplification for Tight Integration with Grid Service Optimizations

Localized generation, storage, and intelligent power electronics are increasingly being integrated into building. The excess storage, thermal, and generation capacity can be used to develop new markets for ancillary services such as peak reduction, voltage and frequency support, or load flattening. Widespread participation in these markets will make the power grid more resilient. However, widespread participation in these markets will require a simple and intuitive control over the excess capacity by the building occupants. Most importantly for adopting these technologies, participation in these markets should not require sacrificing occupant comfort. Many of the proposed control and optimization technologies for supplying the ancillary services do not explicitly incorporate occupant comfort into their models and when they do, generally utilize a rigid constraint on the indoor air temperature set a priori. This reduces flexibility in using excess thermal capacity. It also cannot take into account uncertainties in local factors that affect thermal comfort such as clothing insulation or relative humidity. In this paper we present and justify some assumptions that simplify the standard predictors of thermal comfort. We also develop a regression model of the thermal comfort that is linear with respect to the indoor air temperature. Next we develop the concept of thermal comfort variation that eliminates the dependence of the thermal comfort on uncertain thermal comfort factors. Then, we present a quadratic program utilizing the thermal comfort variation in both the objective function and as a constraint. Finally, we show the results of a time-of-use cost optimization that utilizes the simplified thermal comfort model.

Melin, Alexander↗
DOE OSTI2021

Effects of finite element discretization and model simplification on calculations of ductile failure initiation

The finite element method is a scheme to discretize the infinite number of degrees of freedom in continuum-level problems down to a finite number of degrees of freedom. This discretization is done in conjunction with methods that also reduce the field differential equations to sets of algebraic ones that can be solved by arithmetical operations. Therefore, solutions attained by finite element models are approximations to the exact solutions of the field equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Stellarator Simplification using Permanent Magnets (PM4Stell)

This Report describes the design and prototyping of an array of rare-Earth permanent magnets to form a stellarator. This effort was motivated by the hypothesis that the usage of permanent magnets, rather than electromagnetic coils with complex geometry, could reduce the cost of stellarator construction and thereby make increase the feasibility of the stellarator as a technology for a fusion-based power plant. In this project, we have developed novel methods for specifying the positions, shapes, and polarizations of the magnets in the array, and have developed designs for mounting structures and tooling for assembly. We have also performed detailed finite-element modeling to qualify the accuracy of the magnetic field produced by the magnet array as designed, and to confirm that the structure can withstand the forces between the magnets. We have also developed techniques for measuring the magnetic field produced by the array once constructed, as well as for correcting errors in the field arising from misalignments and offsets within the tolerances for mounting and fabrication. Finally, we have constructed a tabletop prototype of a section of the array to qualify the concept for assembling and mounting magnets within the array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Stellarator Simplification using Permanent Magnets (PM4Stell)

This Report describes the design and prototyping of an array of rare-Earth permanent magnets to form a stellarator. This effort was motivated by the hypothesis that the usage of permanent magnets, rather than electromagnetic coils with complex geometry, could reduce the cost of stellarator construction and thereby make increase the feasibility of the stellarator as a technology for a fusion-based power plant. In this project, we have developed novel methods for specifying the positions, shapes, and polarizations of the magnets in the array, and have developed designs for mounting structures and tooling for assembly. We have also performed detailed finite-element modeling to qualify the accuracy of the magnetic field produced by the magnet array as designed, and to confirm that the structure can withstand the forces between the magnets. We have also developed techniques for measuring the magnetic field produced by the array once constructed, as well as for correcting errors in the field arising from misalignments and offsets within the tolerances for mounting and fabrication. Finally, we have constructed a tabletop prototype of a section of the array to qualify the concept for assembling and mounting magnets within the array.

47 OTHER INSTRUMENTATION↗