Enhancement of thermoelectric properties in the Nb–Co–Sn half-Heusler/Heusler system through spontaneous inclusion of a coherent second phase
Abstract not provided
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
To investigate the spectator role of the 1g{sub 5/2} unpaired proton outside the Z = 50 closed shell, the {sup 120}Sn(p-vector,alpha){sup 117}In and {sup 121}Sb(p-vector,alpha){sup 118}Sn reactions have been measured in high resolution experiments at 23 MeV incident proton energy of the Munich MP Tandem accelerator, using the Stern-Gerlach type polarized hydrogen ion source and the Q3D magnetic spectrograph.
Nb₃Sn has emerged as a leading alternative material due to its higher superconducting critical temperature (Tc) and superheating field (Hsh), promising a viable solution to the intrinsic performance limit currently faced by Nb superconducting radiofrequency (SRF) cavities. We sputter-coated Nb₃Sn inside Nb SRF cavity using a stoichiometric Nb₃Sn tube target in a DC cylindrical magnetron sputter coater. The target was fabricated by growing an estimated >20 μm thick Nb₃Sn layer on a Nb tube via Sn vapor diffusion using Jefferson Lab’s coating system. Approximately 150 nm thick Nb-Sn films were sputter-deposited onto flat Nb samples at positions representing the beam tubes and equator of a 2.6 GHz Nb cavity. Post-deposition annealing at 950 °C for 3 h resulted in the formation of Nb₃Sn. Microstructural analysis of the annealed films was carried out to investigate the morphology and structure of the Nb₃Sn films. Later, a 2.6 GHz Nb SRF cavity was coated with a ~1.2 μm thick sputtered Nb-Sn film using a stoichiometric Nb₃Sn target, followed by annealing. Cryogenic RF testing of the annealed cavity demonstrated a Tc of 17.8 K, indicating the formation of Nb₃Sn. After a light Sn recoating treatment, the cavity achieved a quality factor (Q0) of 6.7E+08 at lower field at 2.0 K.
The three tin-rich lanthanum stannides LaSn{sub 3}, La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}, which were known only from indexed powder diagrams, have been synthesized from melts of the elements by slow cooling of sealed sample tubes or arc melting and quenching. Their crystal structures were refined from X-ray powder diffractometer data using the Rietveld method. LaSn{sub 3} (cubic, space group Pm3-bar m, a=477.77(1) pm, Z=1, R{sub F}{sup 2}=0.044) crystallizes with the common Cu{sub 3}Au structure type, which can be described either as an ordered close packing or as a network of [Sn{sub 6}] octahedra (closo clusters) connected via common vertices. The structures of La{sub 2}Sn{sub 5} (Ce{sub 2}Sn{sub 5} structure type, orthorhombic, space group Cmmm, a=463.85(3), b=3581.3(3), c=469.83(4) pm, Z=4, R{sub F}{sup 2}=0.075) and La{sub 3}Sn{sub 7} (Gd{sub 3}Sn{sub 7} structure type, orthorhombic, space group Cmmm, a=457.83(4), b=2628.40(2), c=467.99(4) pm, Z=2, R{sub F}{sup 2}=0.068), which retain some similarities to ordered close packings as well, show 2D blocks of corner-sharing [Sn{sub 6}] octahedra terminated by [Sn{sub 5}] square pyramids (nido clusters). In between these layers, isolated Sn zigzag chains similar to those observed in LaSn (CrB structure type) are interspersed. A simple v.e. count after Zintl and Wade/Jemmis for the polyanionic Sn building blocks resulting from these structure descriptions fits the observed v.e. numbers of the three compounds almost exactly. It is also possible to explain the minima of the tDOS close to E{sub F}, which have been calculated within the framework of the FP-LAPW DFT approach. However, the simple assumption of an exclusively Sn-p bonded polyanion would neglect the large Sn-La bonding contributions and the reduced amount of electron transfer from La to Sn when compared to related alkaline earth stannides. - Graphical Abstract: La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}, stacking variants of LaSn{sub 3} (Cu{sub 3}Au type, closo clusters) and LaSn (CrB type, zig-zag chains) Highlights: > Preparation of binary La stannides LaSn{sub 3}, La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}. > La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7} do not appear in published phase diagrams. > Full pattern Rietveld refinements of the crystal structures of all compounds. > Revised description of the structure types emphasizes polyanionic Sn framework. > Structural motifs rationalized through DFT calculations and Zintl and Wade rules.
Seven acentric sulfides Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) were grown by a high-temperature salt flux method. The crystal structures of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds were determined by single-crystal X-ray diffraction with the aid of solid-state NMR spectroscopy. The Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds are isostructural and crystallize in the Ba 6 Ag 4 Sn 4 S 16 structure type. The Sn-containing compound exhibits high structural similarity to Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) with the presence of an interstitial atomic position partially occupied by Sn atoms. The chemical bonding characteristics of Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 were understood with electron localization function calculations coupled with crystal orbital Hamilton population calculations. The Ba–S and Cu–S interactions are dominantly ionic, but the Sn–S interactions consist of strong covalent bonding characteristics in Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 . The monovalent Cu atoms, mixed with certain metals with various oxidation states, significantly shift the optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds. This results in a good balance between the second-harmonic-generation (SHG) response and laser damage threshold (LDT). Ba 6 (Cu 1.9 Zn 1.1 )Sn 4 S 16 possesses a high SHG response and a high LDT of 2.8 × AGS and 3 × AGS, respectively. Here, a density functional theory calculation revealed that CuS 4 and SnS 4 tetrahedra significantly contribute to the SHG response in Ba 6 (Cu 2 Mg)Sn 4 S 16 , which also confirmed that CuS 4 tetrahedra are crucial for the stability and optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds revealed by electronic structure analysis.
The IceCube neutrino observatory pursues a follow-up program selecting interesting neutrino events in real-time and issuing alerts for electromagnetic follow-up observations. In 2012 March, the most significant neutrino alert during the first three years of operation was issued by IceCube. In the follow-up observations performed by the Palomar Transient Factory (PTF), a Type IIn supernova (SN IIn) PTF12csy was found 0.°2 away from the neutrino alert direction, with an error radius of 0.°54. It has a redshift of z = 0.0684, corresponding to a luminosity distance of about 300 Mpc and the Pan-STARRS1 survey shows that its explosion time was at least 158 days (in host galaxy rest frame) before the neutrino alert, so that a causal connection is unlikely. The a posteriori significance of the chance detection of both the neutrinos and the SN at any epoch is 2.2σ within IceCube's 2011/12 data acquisition season. Also, a complementary neutrino analysis reveals no long-term signal over the course of one year. Therefore, we consider the SN detection coincidental and the neutrinos uncorrelated to the SN. However, the SN is unusual and interesting by itself: it is luminous and energetic, bearing strong resemblance to the SN IIn 2010jl, and shows signs of interaction of the SN ejecta with a dense circumstellar medium. High-energy neutrino emission is expected in models of diffusive shock acceleration, but at a low, non-detectable level for this specific SN. In this paper, we describe the SN PTF12csy and present both the neutrino and electromagnetic data, as well as their analysis.
Undercooling of low melting point metals, Sn and In, on graphite, Cu, and Au-coated Cu surfaces is examined using an in-situ x-ray diffraction technique. Undercoolings of up to 56.1 C were observed for Sn solidified on graphite, which is a non-wetting substrate, while lower undercoolings were observed for Sn of 17.3 C on Au/Ni/Cu and 10.5 C on Cu surfaces. Indium behaved quite differently, showing undercoolings of less than 4 C on all three substrates. In addition, lattice expansion/contraction behavior of Sn, In and intermetallic compounds (IMCs) that formed during the reaction of Sn with the Au/Ni/Cu surface were measured. Results showed anisotropic and non-linear expansion of both Sn and In, with a contraction, rather than expansion, of the basal planes of In during heating. The principal IMC that formed between Sn and the Au/Ni/Cu surface was characterized as CuSn and had an average expansion coefficient of 13.6x10-6/ C, which is less than that of Sn or Cu.
We present an extended X-ray absorption fine structure investigation of the local environment of Sn atoms in strained and relaxed Ge{sub 1−x}Sn{sub x} layers with different compositions. We show that the preferred configuration for the incorporation of Sn atoms in these Ge{sub 1−x}Sn{sub x} layers is that of a α-Sn defect, with each Sn atom covalently bonded to four Ge atoms in a classic tetrahedral configuration. Sn interstitials, Sn-split vacancy complexes, or Sn dimers, if present at all, are not expected to involve more than 2.5% of the total Sn atoms. This finding, along with a relative increase of Sn atoms in the second atomic shell around a central Sn atom in Ge{sub 1−x}Sn{sub x} layers with increasing Sn concentrations, suggests that the investigated materials are homogeneous random substitutional alloys. Within the accuracy of the measurements, the degree of strain relaxation of the Ge{sub 1−x}Sn{sub x} layers does not have a significant impact on the local atomic surrounding of the Sn atoms. Finally, the calculated topological rigidity parameter a** = 0.69 ± 0.29 indicates that the strain due to alloying in Ge{sub 1−x}Sn{sub x} is accommodated via bond stretching and bond bending, with a slight predominance of the latter, in agreement with ab initio calculations reported in literature.
Explore the source record for details and available documents.
Technetium-99 is a radioactive contaminant of high concern at many nuclear waste storage sites. At the U.S. Department of Energy Hanford Site, 99Tc is a component of low-activity waste (LAW) fractions of the nuclear tank waste, which are highly caustic, high ionic strength and have high concentrations of chromate. Removal of 99Tc from LAW streams would greatly benefit the site remediation process. In this study, we investigated the removal of 99Tc(VII), as pertechnetate, from deionized water (DIW) and a LAW simulant using two solid sorbents, tin (II) apatite (Sn-A) and SnCl2 through batch sorption testing and solid phase characterization. Sn-A showed higher levels of removal of Tc from both DIW and LAW simulant compared with the SnCl2. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/XEDS) and X-ray adsorption spectroscopy (XAS) of Sn-A following batch experiments in DIW showed that TcO4- is reduced to Tc(IV) on the Sn-A surface with no incorporation into the lattice structure of Sn-A. The performance of Sn-A in the LAW simulant was lowered due to a combined effect of the high alkalinity, which lead to an increased dissolution of Sn from the Sn-A, and a preference for the reduction of Cr(VI) over Tc(VII).
Interfacial reactions between eutectic SnIn and single crystalline Cu during solid-state aging at low temperature were investigated systematically. Three types of phase transformations between Cu(In,Sn){sub 2} layer and Cu{sub 2}(In,Sn) layer were observed, which are Cu(In,Sn){sub 2} grows and Cu{sub 2}(In,Sn) consumes at 40 °C, Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) grow simultaneously at 60 °C, as well as Cu(In,Sn){sub 2} consumes and Cu{sub 2}(In,Sn) grows at 80 and 100 °C. According to physicochemical approach, the chemical reactions at Cu/Cu{sub 2}(In,Sn)/Cu(In,Sn){sub 2}/SnIn interfaces were discussed in detail. It was concluded that the diffusion ability of Cu and In atoms dominated different phase transformations. When diffusion constants k{sub 1In2} > 8/3k{sub 1Cu2} Cu(In,Sn){sub 2} will grow, and if k{sub 1Cu2} ≫ k{sub 1In2} Cu{sub 2}(In,Sn) will grow. Both Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) can grow in the condition of k{sub 1In2} ≈ k{sub 1Cu2}. The values of k{sub 1Cu2} and k{sub 1In2} at different temperatures on (100)Cu and (111)Cu substrate were also calculated or estimated by analyzing the growth kinetics of the compound layers.
SN 2009ku, discovered by Pan-STARRS-1, is a Type Ia supernova (SN Ia), and a member of the distinct SN 2002cx-like class of SNe Ia. Its light curves are similar to the prototypical SN 2002cx, but are slightly broader and have a later rise to maximum in g. SN 2009ku is brighter ({approx}0.6 mag) than other SN 2002cx-like objects, peaking at M{sub V} = -18.4 mag, which is still significantly fainter than typical SNe Ia. SN 2009ku, which had an ejecta velocity of {approx}2000 km s{sup -1} at 18 days after maximum brightness, is spectroscopically most similar to SN 2008ha, which also had extremely low-velocity ejecta. However, SN 2008ha had an exceedingly low luminosity, peaking at M{sub V} = -14.2 mag, {approx}4 mag fainter than SN 2009ku. The contrast of high luminosity and low ejecta velocity for SN 2009ku is contrary to an emerging trend seen for the SN 2002cx class. SN 2009ku is a counterexample of a previously held belief that the class was more homogeneous than typical SNe Ia, indicating that the class has a diverse progenitor population and/or complicated explosion physics. As the first example of a member of this class of objects from the new generation of transient surveys, SN 2009ku is an indication of the potential for these surveys to find rare and interesting objects.
Dipole magnets for the proposed Future Circular Collider (FCC) demand specifications significantly beyond the limits of all existing Nb 3 Sn wires, in particular a critical current density (J c ) of more than 1500 A mm -2 at 16 T and 4.2 K with an effective filament diameter (D eff ) of less than 20 μm. The restacked-rod-process (RRP ® ) is the technology closest to meeting these demands, with a J c (16 T) of up to 1400 A mm -2 , residual resistivity ratio > 100, for a sub-element size D s of 58 μm (which in RRP ® wires is essentially the same as D eff ). An important present limitation of RRP ® is that reducing the sub-element size degrades J c to as low as 900 A mm -2 at 16 T for D s = 35 μm. To gain an understanding of the sources of this J c degradation, we have made a detailed study of the phase evolution during the Cu–Sn 'mixing' stages of the wire heat treatment that occur prior to Nb 3 Sn formation. Using extensive microstructural quantification, we have identified in this paper the critical role that the Sn–Nb–Cu ternary phase (Nausite) can play. The Nausite forms as a well-defined ring between the Sn source and the Cu/Nb filament pack, and acts as an osmotic membrane in the 300 °C–400 °C range—greatly inhibiting Sn diffusion into the Cu/Nb filament pack while supporting a strong Cu counter-diffusion from the filament pack into the Sn core. This converts the Sn core into a mixture of the low melting point (408 °C) η phase (Cu 6 Sn 5 ) and the more desirable ε phase (Cu 3 Sn), which decomposes at 676 °C. After the mixing stages, when heated above 408 °C towards the Nb 3 Sn reaction, any residual η liquefies to form additional irregular Nausite on the inside of the membrane. All Nausite decomposes into NbSn 2 on further heating, and ultimately transforms into coarse-grain (and often disconnected) Nb 3 Sn which has little contribution to current transport. Understanding this critical Nausite reaction pathway has allowed us to simplify the mixing heat treatment to only one stage at 350 °C for 400 h which minimizes Nausite formation while encouraging the formation of the higher melting point ε phase through better Cu–Sn mixing. Finally, at a D s of 41 μm, the Nausite control heat treatment increases the J c at 16 T by 36%, reaching 1300 A mm -2 (i.e. 2980 A mm -2 at 12 T), and moving RRP ® closer to the FCC targets.
Evaporation of Cu or Sn from liquid iron alloys containing C and S was experimentally investigated. The initial C concentration, [pct C] 0 , in the liquid alloy was varied from zero to C saturation, and the evaporation temperature was varied from 1513 K to 1773 K (1240 °C to 1500 °C). Along with the report by one of the present authors, the evaporation mechanism of Cu and Sn from liquid Fe-C-S alloy is proposed, after a modification from the previous mechanism. It was proposed that Cu and Sn evaporate as Cu(g) and Sn(g) and also evaporate as CuS(g) and SnS(g), which are more volatile species. Therefore, availability of S in the alloy affects the overall evaporation rate of Cu and Sn. At the same time, C in the alloy also forms volatile carbosulfides CS(g) and CS 2 (g), thereby competing with Cu and Sn. Moreover, C increases the activity coefficients of Cu, Sn, and S. This increases the thermodynamic driving force for the formation of CuS(g) and SnS(g). Therefore, increasing [pct C] partly accelerates the evaporation rate of Cu and Sn by increasing the activity coefficient but partly decelerates the evaporation rate by lowering the available S content. S partly accelerates the evaporation rate by increasing the available S for the sulfide gas species but partly decelerates the evaporation rate due to the surface poisoning effect. Increasing the reaction temperature increases the overall evaporation rate. All these facts were taken into account in order to develop an evaporation rate model. This model was extended from the present authors’ previous one by taking into account (1) CS(g), S(g), and CS{ 2 (g) (therefore, the following species were considered as dominant evaporating species: Cu(g), CuS(g), Sn(g), SnS(g), S(g), CS(g), and CS 2 (g)); (2) the effect of C and temperature on the activity coefficients of Cu, Sn, and S; (3) the effect of C and temperature on the density of the liquid alloy; and (4) the effect of temperature on the S adsorption coefficient. This revised evaporation model was used in order to explain the experimental data, and it showed good agreement. In particular, it was found that the temperature showed a significant effect on the evaporation rate, and the effect of temperature and C content on the activity coefficients of Cu, Sn, and S also significantly affected the evaporation rate. The chemical reaction rate constant of the individual evaporation reaction (k i } R ) and residual rate constant (k i r ) could be obtained as a function of temperature. The activation energy of each evaporation reaction was derived and discussed. The evaporation rate model can be applied in order to predict the content of Cu and Sn remaining in liquid iron under various conditions of temperature and [pct C].
Synthesis and structural characterization of the two new lanthanum–magnesium–stannides La{sub 3}Mg{sub 4−x}Sn{sub 2+x} (0.12≤x≤0.40) and LaMg{sub 3−x}Sn{sub 2} (0.33≤x≤0.78) are reported. The crystal structures of these intermetallics were determined by single crystal X-ray diffraction analysis and confirmed by Rietveld refinement of powder X-ray diffraction patterns of the corresponding samples. The La{sub 3}Mg{sub 4−x}Sn{sub 2+x} phase crystallizes in the hexagonal Zr{sub 3}Cu{sub 4}Si{sub 2} structure type (P6¯2m, hP9, Z=3, x=0.12(1), a=7.7974(7), c=4.8384(4) Å), which represents an ordered derivative of the hP9-ZrNiAl prototype, ubiquitous among equiatomic intermetallics. The LaMg{sub 3–x}Sn{sub 2} phase is the second representative of the trigonal LaMg{sub 3−x}Ge{sub 2} type, which is a superstructure of the LaLi{sub 3}Sb{sub 2} structure type (P3¯1c, hP34-0.12, Z=6, x=0.35(1), a=8.3222(9), c=14.9546(16) Å). The scheme describing the symmetry reduction/coloring with respect to the parent type is reported here with the purpose to discuss the LaMg{sub 3−x}Sn{sub 2} off-stoichiometry from the geometrical point of view. Structural relationships between the La–Mg–Sn ternary phases, including the already known equiatomic LaMgSn compound (oP12-TiNiSi), are presented in the framework of the AlB{sub 2}-related compounds family and discussed with the aid of group-subgroup relations in the Bärnighausen formalism. - Graphical abstract: Crystal structure of LaMg{sub 3−x}Sn{sub 2} viewed along the (001) direction together with the puckered layer of Mg and Sn atoms hosting Mg2, Mg3 and vacancy □. - Highlights: • Crystal structures of the new La{sub 3}Mg{sub 4−x}Sn{sub 2+x} and LaMg{sub 3−x}Sn{sub 2} phases were determined. • The off-stoichiometry of LaMg{sub 3−x}Sn{sub 2} was discussed from geometrical point of view. • Structural relations between the known La–Mg–Sn phases were established. • The studied compounds are related to the AlB{sub 2} type by symmetry reduction.
The corundum-type In{sub 2-2x}Zn{sub x}Sn{sub x}O{sub 3} solid solution (cor-ZITO, x {<=} 0.7) was synthesized at 1000 C under a high pressure of 70 kbar. cor-ZITO is a high-pressure polymorph of the transparent conducting oxide bixbyite-In{sub 2-2x}Zn{sub x}Sn{sub x}O{sub 3} (x {<=} 0.4). Analysis of the extended X-ray absorption fine structure suggests that significant face-sharing of Zn and Sn octahedra occurs, as expected for the corundum structure type. In contrast to the ideal corundum structure, however, Zn and Sn are displaced and form oxygen bonds with lengths that are similar to those observed in high-pressure ZnSnO{sub 3}. Powder X-ray diffraction patterns of cor-ZITO showed the expected unit cell contraction with increased cosubstitution, but no evidence for ilmenite-type ordering of the substituted Zn and Sn. A qualitative second harmonic generation measurement, for the solid solution x = 0.6 and using 1064 nm radiation, showed that Zn and Sn adopt a polar LiNbO{sub 3}-type arrangement.
Pt 3 Sn nanoparticles (NPs) enriched with Pt 3 Sn/ultra-small SnO 2 interfaces (Pt 3 Sn@u-SnO 2 /NG) were synthesized through a thermal treatment of Pt 2 Sn/NG in a H 2 atmosphere, followed by annealing under H 2 and air conditions. The unique structure of Pt 3 Sn NPs enriched with Pt 3 Sn/SnO 2 interfaces was observed on the Pt 3 Sn@u-SnO 2 /NG catalyst based on HRTEM. The optimized Pt 3 Sn@u-SnO 2 /NG catalyst achieves high catalytic activity with an ethanol oxidation reaction (EOR) activity of 366 mA mg Pt -1 and a methanol oxidation reaction (MOR) activity of 503 mA mg Pt -1 at the potential of 0.7 V, which are eight-fold and five-fold higher than those for the commercial Pt/C catalyst (44 and 99 mA mg Pt -1 , respectively). The Pt 3 Sn@u-SnO 2 /NG catalyst is found to be 3 times more stable and have higher CO tolerance than Pt/C. The outstanding performance of the Pt 3 Sn@u-SnO 2 /NG catalyst should be ascribed to the synergetic effect induced by the unique structure of Pt 3 Sn NPs enriched with Pt 3 Sn/SnO 2 interfaces. The synergetic effect between Pt 3 Sn NPs and ultra-small SnO 2 increases the performance for alcohol oxidation because the Sn in both Pt 3 Sn and SnO 2 favors the removal of CO ads on the nearby Pt by providing OH ads species at low potentials. The present work suggests that the Pt 3 Sn@u-SnO 2 is indeed a unique kind of efficient electrocatalyst for alcohol electrooxidation.
Tightly consolidated Sn-Ta and Sn-B based alloys have been prepared by the reaction among constituent metal powders at 750-775 deg. C. Sn-Ta and Sn-B based alloys exhibit quite similar microstructures. A small amount of Ti addition seems to improve the bonding between Ta or B particles and Sn matrix. Nb{sub 3}Sn wires have been fabricated by the Jelly Roll (JR) and Multi-rod (MR) process using Sn based alloy sheet and rod, respectively. Thick Nb{sub 3}Sn layers with nearly stoichiometric A15 composition are synthesized through a new diffusion mechanism between Nb and Sn based alloy. B{sub c2}(4.2 K)'s of 26.9 T (mid) and 26.5 T (mid) have been obtained in the JR and MR processed wires, respectively, using Sn-Ta based alloy. These wires exhibit enough non-Cu J{sub c} to be used above 20 T and 4.2 K. T{sub c} of JR wires using Sn-B based sheet is 18.14 K (offset) which is slightly higher than that of wires using Sn-Ta based sheet.