Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sodium Chloride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enabling in-situ LIBS measurements of liquids and slurries

The aim of this work was to explore the use of, and further develop, a in-situ and near-real time LIBS (Laser Induced Breakdown Spectroscopy) instrument to measure liquids relevant to the Hanford site. Specifically, we investigated the feasibility of using LIBS to measure the cation composition of HLW (High Level Waste) streams. In addition, we focused on enabling continuous interrogation of those liquids using the LIBS system. For the first part, we investigated simple (sodium nitrate) solutions as well as various Hanford tank waste surrogate slurries. We showed that relevant cations (such as sodium, aluminum, magnesium, potassium) can be measured via LIBS under good conditions but the results – both quantitative and qualitative (aka reproducibility) – strongly depend on the kind and concentration of the material used. The dependence of signal intensity on concentration was also confirmed by other measurements conducted (sodium chloride and sodium nitrate in water). For the second part, we investigated the influence of varying depth and concentration of a liquid sample. We observed that for the concentrations and fill depths investigated, the liquid fill depth did not impact the emission intensity of the analyte, while concentration is confirmed to have significant effects. The results of the sample depth experiments influenced testing of waste surrogates. In addition, we focused on further developing and adapting data fitting tools in order to efficiently, accurately, and reproducibly identify the elements and materials present in a LIBS spectrum.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Identification of Critical Material Attributes in Lignin Streams Based on Pseudomonas putida Performance

Variability in chemical composition of corn stover feedstocks has been suggested to play a role in biocatalyst performance during the conversion of lignocellulosic biomass to value-added compounds. In previous studies, we investigated the performance of Pseudomonas putida CJ781 - an engineered bacterium that converts aromatic compounds to muconate - on various lignin streams produced from the deacetylation of corn stover, and we found significant differences on muconate production. To better understand the origin of these differences, we down selected twenty-two compounds from literature - that had previously been detected as extractives in lignin streams - and we analyzed their concentrations in 12 lignin streams generated from different feedstocks. P. putida CJ781 was then cultivated in mock lignin streams supplemented with various concentrations of these compounds. Bacterial growth was tracked in microtiter plates and the performance was measured by comparing maximum growth rates among conditions. At maximum concentrations that may be found in lignin streams, sodium was the material attribute that limited growth rate in a greater extent, with a reduction in growth rate by 8 to 37%, depending on the counter ion, with sodium nitrate being the most inhibitory, followed by sodium acetate, sodium chloride, and sodium sulfate. Ammonium acetate was also found to be inhibitory at average concentrations of ammonium in lignin streams, reducing maximum growth rate by 18%. Overall, the data from this study has allowed to down select critical material attributes in lignin streams and process parameters that significantly affect the performance of P. putida and will be used as input to predictive models that aim to reduce risks attributed to feedstock variability in lignocellulosic biorefineries.

biocatalyst↗
DOE OSTI2025

Developing A Custom-Built Metal Aerosol Processing Chamber: Analysis of Aerosol Coagulation at Low Humidities

We have developed an intermediate size (906 L) aerosol processing chamber, and this work reports on the design and initial characterization of dry aerosol experiments. Specifically, we are determining wall-loss and coagulation correction factors using the observed size distribution measurements for surrogates of common aerosol classes: sodium chloride, sucrose, and biomass burning aerosol smoke. Results show that, on average, sodium chloride, sucrose, and smoke wall-loss rates converge to similar values on relatively short time scales (< 1 h). The fitted coagulation correction factor, W C -1 , for smoke particles (1.23 ± 0.312), indicates that on average they adhere to each other more than sodium chloride (0.969 ± 0.524) and sucrose (1.16 ± 1.38). The relative uncertainty is high for the coagulation correction, but it is consistent with our Monte Carlo error analysis. This study lays the foundation for future experiments at elevated humidity and supersaturation conditions to characterize the influence of particle shape on coagulation and cloud parameters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

TEX-Chlorine for TerraPower - Experimental Execution Report

This report describes the critical configurations of the TEX4TerraPower project that were performed in FY26Q4. Within this report, the configurations are presented along with physical measurements performed in support of benchmarking. TEX4TerraPower builds upon the TEX-Chlorine experiments, which in turn were based on the TEX-HEU experiments. Similar to TEX-Chlorine, the TEX4TerraPower configurations iteratively layered HEU fuel with sodium chloride (NaCl) absorbers. However, the main difference in the density achieved during the fabrication process of the sodium chloride absorbers. Unlike TEX-Chlorine, which was able to achieve ~70% theoretical density, the TEX4TerraPower salt plates achieved >90% theoretical density by hydraulically pressing the salt.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Effect of Ionic Strength and Anion Identity on Rare‐Earth Element Chelation by Poly(acrylic acid)

Abstract Rare‐earth elements (REEs) are critical components of many modern technologies, but their efficient separation and purification continue to pose significant challenges. Metal‐binding polymers may enable the development of promising alternative approaches to conventional separation techniques (e.g., solvent extraction), and insights into the interactions between the metal ions and polymers in solution are crucial to such development. In this work, the effect of ionic strength on the chelation of REEs by poly(acrylic acid) is investigated using isothermal titration calorimetry (ITC) to measure the metal‐binding thermodynamics. ITC experiments revealed that when ionic strength increases from increasing the sodium acetate buffer strength, polymer‐REE binding becomes increasingly disfavored. However, when ionic strength is increased by the addition of sodium chloride, binding again becomes increasingly disfavored, but to a lesser extent than when ionic strength increases from increasing the buffer strength. Additionally, the reduction in binding affinity is enthalpically driven when ionic strength is raised with sodium chloride, while it is entropically driven when raised with sodium acetate buffer, suggesting competive binding by the acetate ions. These results highlight the importance of ionic strength in polymer‐metal binding thermodynamics and will guide the development of new processes for the purification of critical metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlations between Texture Profile Analysis and Sensory Evaluation of Cured Largemouth Bass Meat (Micropterus salmoides)

Texture is an important factor in evaluating the quality of aquatic products. To evaluate the texture properties of cured large mouth bass, edible sodium chloride (0, 1.0, 2.0, and 3.0%) was smeared to the bass meat. Texture profile analysis (TPA) and sensory evaluation were performed to evaluate the quality of the cured samples, and the correlations of the indexes in the two methods were analyzed. Two principal components were obtained from the TPA indexes and sensory evaluation indexes, and the cumulative variance contribution rates were 73.87% and 72.99%, respectively. Results from the principal component analysis showed that the main indicators that affected the TPA were gumminess and springiness, while those that affected sensory evaluation were chewiness and adhesiveness. The TPA index and sensory evaluation could be effectively improved when the sodium chloride added to the bass meat was 1%. In the correlation analysis, sensory springiness was negatively correlated with TPA hardness ( P < 0.05 , r = −0.553) but positively correlated with TPA chewiness ( P < 0.05 , r = 0.596). After stepwise regression analysis, the prediction equation between the sensory springiness and TPA hardness was obtained as SSp=5.770−0.002Ha. These results provide a basis for predicting the quality of large mouth bass cured products.

Li, Meijin↗
DOE OSTI2022

Printed Potentiometric Nitrate Sensors for Use in Soil

Plant-available nitrogen, often in the form of nitrate, is an essential nutrient for plant growth. However, excessive nitrate in the environment and watershed has harmful impacts on natural ecosystems and consequently human health. A distributed network of nitrate sensors could help to quantify and monitor nitrogen in agriculture and the environment. Here, we have developed fully printed potentiometric nitrate sensors and characterized their sensitivity and selectivity to nitrate. Each sensor comprises an ion-selective electrode and a reference electrode that are functionalized with polymeric membranes. The sensitivity of the printed ion-selective electrodes was characterized by measuring their potential with respect to a commercial silver/silver chloride reference electrode in varying concentrations of nitrate solutions. The sensitivity of the printed reference electrodes to nitrate was minimized with a membrane containing polyvinyl butyral (PVB), sodium chloride, and sodium nitrate. Selectivity studies with sulphate, chloride, phosphate, nitrite, ammonium, calcium, potassium, and magnesium showed that high concentrations of calcium can influence sensor behavior. The printed ion-selective and reference electrodes were combined to form a fully printed sensor with sensitivity of −48.0 ± 3.3 mV/dec between 0.62 and 6200 ppm nitrate in solution and −47 ± 4.1 mV/dec in peat soil.

Baumbauer, Carol L. (ORCID:0000000246747551)↗
DOE OSTI2024

Electrochemical chlor-iron process for iron production from iron oxide and salt water

The iron and steel industry accounts for ~8% of global greenhouse gas emissions. Electrochemical reduction of iron ore to metal for electric arc furnaces can enable sustainable steel production, but existing electrochemical processes require expensive capital or electrolytes. Here we report a low-temperature, electrochemical cell that consumes low-cost and abundant iron oxide and aqueous sodium chloride, while co-producing sodium hydroxide and chlorine. Industrially relevant current densities and Faradaic efficiencies for iron production were demonstrated, with 94% selectivity to iron metal at an applied current density of 200 mA cm –2 . Freestanding films of phase-pure iron were formed after 4h of continuous, stable electrolysis. The process can lead to levelized costs of iron that are competitive with iron produced in fossil-fuel-powered blast furnaces, and the co-produced sodium hydroxide can be used for CO 2 capture from the air or ocean, creating a net-negative-emission process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Impact of Ethylenediaminetetraacetic Acid (EDTA) on the Sorption of Nd(III), Th{sup (IV)}, and U(VI) onto Dolomite in WIPP-Relevant Brines, GWB and ERDA-6 - 20356

Storage of legacy, transuranic waste at the Waste Isolation Pilot Plant (WIPP) requires accurate risk models for performance assessments. These models must predict the long-term fate and transport of contaminants in the WIPP and surrounding environment. Laboratory support is necessary for the development of an accurate model through better understanding of contaminant behavior in the WIPP. The WIPP is a deep geologic repository that is characterized by high ionic strength due to evaporite deposits in the Salado formation (porewaters up to 7.4 M). High concentrations of sodium chloride (NaCl), calcium chloride (CaCl{sub 2}), and magnesium chloride (MgCl{sub 2}) are particularly of concern due to their potential impact on solubility and ultimately transport of contaminants of concern. Additionally, ligands capable of forming strong complexes with metals are found in significant concentrations in the WIPP environment due to their disposal from waste processing and formation during degradation of repository components (e.g. cellulose degradation by calcium hydroxide in cement). Consequently, there is a need to investigate the fate and transport of contaminants in the WIPP environment with a focus on the effects of high ionic strength and strongly coordinating ligands. Contaminants of high concern include the actinides (U(VI), Pu(IV), and Am(III)). Laboratory support of the WIPP modeling efforts was provided by this research. A series of batch experiments were utilized to study the impact of ionic strength, contaminant concentration, and the presence of ethylenediaminetetraacetic acid (EDTA) on the sorption of Nd(III), Th(IV), and U(VI) onto dolomite, a carbonate mineral found within the Culebra formation. The Culebra formation is the most transmissive layer above the WIPP, making transport of contaminants the most likely route in previous risk assessments. Two brines specifically designed to imitate conditions within the WIPP environment were used in these experiments. The U.S. Energy Research and Development Administration Well 6 (ERDA-6, 95%) brine simulates a low Mg environment, while the generic weep brine (GWB, 95%) simulates the WIPP environment with a high Mg concentration. Mg is added to the repository in the form of MgO as an engineered barrier and is naturally present in some formations. It is expected to scavenge carbonate from solutions decreasing formation of the highly soluble and competitive uranium-carbonate complexes. EDTA is used during manipulations of nuclear materials due to its ability to form strong, stable complexes with the actinides and may be found in high concentrations (up to 0.08 mM) within the WIPP as waste canisters degrade. Further, it may provide additional avenues for unwanted transport of contaminants. Nd(III) and Th(IV) were used as stable analogues of Am(III) and Pu(IV), respectively, to represent the most common oxidation states of actinides in the WIPP environment in addition to U(VI). The potential for colloid formation was also investigated with low and high concentrations of contaminants (10 and 1000 μg/L) using three size-dependent particle separation steps. The results of this research provide a better understanding of potential behavior of actinides in the presence of EDTA and within WIPP-relevant brines. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

EGS Collab Testbed 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead, South Dakota, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. This file contains the second set of tracer data (also include the data uploaded previously, https://gdr.openei.org/submissions/1128) for the EGS Collab testbed. The tracer tests were conducted during October 2018 - November 2019. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. The details about the tracer test can be found in Background and Methods of Tracer Tests (Mattson et al. (2019,a,b)) (also included in this package). References Mattson, E.D., Neupane, G., Plummer, M.A., Hawkins, A., Zhang, Y. and the EGS Collab Team 2019a. Preliminary Collab fracture characterization results from flow and tracer testing efforts. In Proceedings 44th Workshop on Geothermal Reservoir Engineering, edited, Stanford University, Stanford, California. Mattson, E.D., Neupane, G., Hawkins, A., Burghardt, J., Ingraham, M., Plummer, M., and the EGS Collab Team, 2019b. Fracture tracer injection response to pressure perturbations at an injection well. GRC Transactions, Vol. 43, 2019. Neupane, Ghanashyam, Earl Mattson, Adam Hawkins, Mitchell Plummer, and Yuran Zhang. EGS Collab Testbed 1: Tracer data sets. No. 1128. DOE Geothermal Data Repository; Idaho National Laboratory, 2019.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

In Situ Measurement of Stress Corrosion Crack Tip Properties During Environmentally Induced Cracking in Stainless Steel 304L

The influence of the external cathodic area, stress intensity, and electrochemical polarization level on the resultant crack growth rate and crack tip pH and potential was studied for stainless steel 304L in a sodium chloride environment. Before testing, the validity of in situ crack tip property measurements using microprobes and drilled holes was supported through modeling efforts and confirmed with experimental observations. Here, it was found that increasing the R-ratio during corrosion fatigue increased the crack growth rate and decreased the measured crack tip pH of the 304L sample. Decreasing the electrochemical potential (i.e., cathodic polarization) of the bulk sample increased the crack tip pH and stopped measured crack extension under constant K conditions. Conversely, increasing the potential of the bulk sample decreased the crack tip pH and induced cracking under constant K conditions. Decreasing the cathodic area external to the crack increased the measured pH at the crack tip and decreased the crack growth rate under fatigue conditions. For the given configuration, environment, and alloy studied, fatigue crack growth is not sustained by cathodic reactions solely occurring in the crack wake and notch. These results have implications for the ability to predict atmospheric crack growth rates from laboratory, full immersion experiments.

corrosion fatigue↗
DOE OSTI2024

The impact of temperature, chlorides and sulfate-reducing bacteria on the corrosion of steel in soil

Here, this investigation aimed to study the corrosion performance of low-carbon steel in a soil environment at different temperatures. The steel specimens in the soil were treated at three temperatures: 5, 25 and 60°C. The specimens were embedded in chloride-free soil for 21 days, and then 3.5% (by weight) sodium chloride (NaCl) was added to the soil. The specimens were then kept in the chloride-contaminated soil for 54 days. The results of electrochemical experiments showed superior corrosion performance of the specimens at 60°C, which had the lowest corrosion activity, followed by the specimens at 5 and 25°C. The slow nature of the kinetics of the corrosion reactions at 5°C compared with that at ambient temperature was the reason for this improvement at 5°C. The lower number of microorganisms, including sulfate-reducing bacteria, in the soil at 60°C compared with that at the other temperatures was attributed to the lower corrosion activity of steel in the soil at 60°C compared with the corrosion activity of steel in the soil at other temperatures.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Molten salt compositions with enhanced heat transfer and reduced corrosion properties

A heat transfer (exchange) composition comprising a halide salt matrix having dispersed therein nanoparticles comprising elemental carbon in the absence of water and surfactants, wherein said halide is fluoride or chloride, wherein the halide salt may be an alkali halide salt (e.g., lithium fluoride, sodium fluoride, potassium fluoride, rubidium fluoride, sodium chloride, potassium chloride, rubidium chloride, and eutectic mixtures thereof) or an alkaline earth halide salt (e.g., fluoride or chloride salt of beryllium, magnesium, calcium, strontium, or barium), and wherein the nanoparticles comprising elemental carbon may be solid or hollow, and wherein the composition may further include nanoparticles comprising a fissile material (e.g., U, Th, or Pu) dispersed within the composition. Molten salt reactors (MSRs) containing these heat transfer compositions in coolant loops in thermal exchange with a reactor core, as well operation of such MSRs, are also described.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Regeneration of anion-exchange resins for cyclic selenium removal from industrial wastewaters

Application of ion exchange for the removal of selenium (Se) oxyanions from industrial wastewaters is often limited by ineffective regeneration of the ion-exchange resins, particularly in complex systems containing competing ions, such as coal-ash leachate containing high-sulfate concentrations and heavy metal ions. Here, in this study, it was first demonstrated that while conventional regeneration with sodium chloride (NaCl) is effective for simulated wastewater, with ∼80% efficiency, NaCl fails to regenerate resin loaded with real industrial wastewater, achieving less than 20% efficiency. To overcome this challenge, a two-step regeneration process was investigated using a sodium carbonate (Na 2 CO 3 ) solution for elution, followed by a NaCl solution for restoration. Compared to the one-step NaCl regeneration, this integrated process restored more than 80% of the resin's capacity with real industrial wastewaters. Beyond demonstrating regeneration performance, this research emphasizes fundamental mechanistic interpretations of the observed regeneration behavior across different water matrices and experimental conditions. Particularly, accounting for pH-dependent carbonate speciation, it is proposed that the elution step exploits the resin's strong affinity for divalent carbonate ions to displace strongly bound contaminants, while the subsequent restoration step relies mainly on the mass action effects of chloride ions to regenerate the resin sites. The protocol was optimized to achieve rapid regeneration (<10 min) using moderate chemical concentrations (0.5 M) in treating real leachate. In batch cyclic experiments, Se regeneration reached nearly complete recovery after five consecutive sorption and desorption cycles, while in the fixed-bed system, the regeneration efficiency remained at approximately 80% after five cycles.

Anion-exchange resin↗
DOE OSTI2024

TEX-Cl: Integral Experiment Execution of Thermal/Epithermal eXperiments using Highly Enriched Uranium with Polyethylene and Chloride Absorbers

This report documents the experimental configurations and measurements performed for IER-499, TEX with chlorine (TEX-Cl). TEX-Cl is a variant of the TEX-HEU campaign and utilizes highly enriched uranium fuel, high-density polyethylene (HDPE) moderators and reflectors, and interstitial NaCl salt absorbers. These experiments probe the chlorine (from the sodium chloride) absorption cross section in the thermal and intermediate neutron energy regimes, with a small portion in the fast neutron energy regime. Three configurations were selected by maximizing the sensitivity in k eff to the needs of Y-12 for their electrorefining operations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

TEX-Chlorine: Highly Enriched Uranium with Chloride Absorbers to Provide Validation Benchmarks for Y-12 Electrorefining Facility

This report documents the final benchmark of the TEX-Chlorine (IER-499) Thermal Epithermal eXperiments (TEX) with highly enriched uranium with chlorine absorbers and high-density polyethylene reflectors and moderators. TEX-Chlorine is a variation of the TEX-HEU baseline assembly with the addition of sodium chloride absorber plates. This evaluation contains three experimental configurations that were performed on Comet at NCERC between July and August 2024. The three configurations, which were acceptable as benchmark cases, spanned from thermal (first two configurations) to fast (third configuration). All three cases were reviewed and accepted by the ICSBEP TRG in April 2025 and was submitted to the ICSBEP in August 2025 after receiving subgroup approval.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗