SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Free-space Optical Communications Analysis Software (FOCAS) was developed at the Jet Propulsion Laboratory (JPL) to provide mission planners, systems engineers and communications engineers with an easy to use tool to analyze optical communications link.
The National Aeronautics and Space Administration is developing a photon counting ground receiver for free-space optical communications. The receiver consists of a fiber interconnect, superconducting nanowire single photon counting detectors (SNSPDs), and a field programmable gate array (FPGA) based receive modem. This receiver is compliant with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications High Photon Efficiency standard, which is used in the low photon flux communications regime, including on the upcoming Optical Artemis-2 Orion communications demonstration. The receiver architecture is modular, can be scaled for data rate, and is designed with primarily commercial-off-the-shelf technology. Two fiber interconnect and detector architectures are being prototyped. The first uses a few-mode-fiber coupled to a 16-channel SNSPD array and the second architecture uses a photonic lantern coupled to 7 single-pixel SNSPDs. Photon counting, symbol timing recovery, demodulation and decoding is done using several FPGA cards. This presentation describes the unique features of the ground receiver, performance test results, and challenges with using commercial SNSPDs in free-space optical communications.
With NASA funding, the Deep Space Optical Communication (DSOC) Project at JPL is planning a system level technology demonstration of optical communications from deep space. A 22 cm diameter flight laser transceiver (FLT) is being developed for space flight. The FLT will be designed to transmit an average laser power of 4W at 1550 nm and receive a weak 1064 nm laser signal (> 100 femtowatts). Use of the Hale telescope at Palomar Mountain, CA, retrofitted with a photoncounting receiver to detect the downlink from space, is planned. The Optical Communication Telescope Laboratory (OCTL) at Table Mountain, CA will transmit a 1064 nm laser beacon to serve as a pointing reference for the FLT and support low-rate uplink data-rates. The DSOC FLT is part of the baseline payload for the Psyche mission spacecraft recently selected for flight by NASA, providing link demonstration opportunities during the mission cruise phase. Link demonstration opportunities at distances of approximately 0.1 to 2 astronomical units (AU) are expected. The DSOC system is being designed to support downlink data-rates of 0.2 to > 200 Mb/s and uplink data rates of approximately 1.6 kb/s. A status update of DSOC Project activities on flight and ground development will be summarized in this paper.
The goal of the Deep Space Optical Communications project at the Jet Propulsion Laboratory is to demonstrate laser communication links at ranges out to approximately 3 AU. In this paper, we discuss a downlink receiver concept capable of demodulating optical pulse-position modulated (PPM) waveforms with data rates varying from approximately 50 kbps up to 265 Mbps, using a range of PPM orders, slot widths, and code rates. The receiver operates on recorded timestamps corresponding to the times-of-arrival of photons detected by a photon-counting detector array followed by a commercial time-tagger. Algorithms are presented for slot, symbol, and frame synchronization as well as parameter estimation. Estimates of link performance are evaluated through Monte- Carlo simulation for an optical channel that includes optical losses, detector blocking, signal clock dynamics, and pointing-induced downlink fades. Based upon these simulation results, it is expected that link closure may be achieved with at least 3 dB of margin under a variety of relevant conditions.
The NASA Psyche mission is set to explore an asteroid located between Mars and Jupiter with a launch date in 2022. On-board the Psyche spacecraft is experimental demonstrator technology that will allow scientists to explore the capabilities of optical communications – a program called Deep Space Optical Communication (DSOC) led by Jet Propulsion Laboratory (JPL). DSOC seeks to improve communications performance by developing a space-based Flight Laser Transceiver (FLT) and a ground-based transceiver to enable photon-efficient communications with equipment in deep space. An integral part to this FLT system is a high-efficiency photon-counting camera (PCC) that is able to detect both the 1064nm uplink/beacon laser photons and 1550nm downlink laser photons with low background noise, and is capable of withstanding the rigors of space-travel. The paper details the characterization of several asynchronous Geiger-Mode Avalanche Photodiode (GmAPD) arrays developed by MIT Lincoln Laboratory for use in the PCC- specifically evaluating the temperature dependence of background noise, photon detection efficiency at 1064nm and 1550nm wavelengths, pixel lifetime testing, and angle of acceptance measurements. The results of this characterization are used to determine the nominal conditions for the device to operate in while in flight to maintain an efficient link with the ground-based transceiver.
Current key initiatives in deep-space optical communications are treated in terms of historical context, contemporary trends, and prospects for the future. An architectural perspective focusing on high-level drivers, systems, and related operations concepts is provided. Detailed subsystem and component topics are not addressed. A brief overview of past ideas and architectural concepts sets the stage for current developments. Current requirements that might drive a transition from radio frequencies to optical communications are examined. These drivers include mission demand for data rates and/or data volumes; spectrum to accommodate such data rates; and desired power, mass, and cost benefits. As is typical, benefits come with associated challenges. For optical communications, these include atmospheric effects, link availability, pointing, and background light. The paper describes how NASA's Space Communication and Navigation Office will respond to the drivers, achieve the benefits, and mitigate the challenges, as documented in its Optical Communications Roadmap. Some nontraditional architectures and operations concepts are advanced in an effort to realize benefits and mitigate challenges as quickly as possible. Radio frequency communications is considered as both a competitor to and a partner with optical communications. The paper concludes with some suggestions for two affordable first steps that can yet evolve into capable architectures that will fulfill the vision inherent in optical communications.
Four areas of research in optical communications in support of future manned space missions being carried out at Johnson Space Center are discussed. These are the Space Station Freedom proximity operations, direct LEO-to-ground communications, IR voice communications inside manned spacecraft, and deep space and lunar satellite operations. The background, requirements, and scenario for each of these areas of research are briefly described.
UNKNOWN
Preliminary concepts and designs of a deep space optical link for planetary and deep space science are described. As a mission application, attention is given to a spacecraft optical transceiver package (OPTRANSDAC) attached to a Mars rover vehicle. Also considered are a preliminary concept for a 1000-AU mission, and to a tentative long-range plan for NASA's deep space optical communications program.
The National Aeronautics and Space Administration has developed a capacity approaching modulation and coding scheme that comprises a serial concatenation of an inner accumulate pulse-position modulation (PPM) and an outer convolutional code [or serially concatenated PPM (SCPPM)] for deep-space optical communications. Decoding of this code uses the turbo principle. However, due to the nonbinary property of SCPPM, a straightforward application of classical turbo decoding is very inefficient. Here, we present various optimizations applicable in hardware implementation of the SCPPM decoder. More specifically, we feature a Super Gamma computation to efficiently handle parallel trellis edges, a pipeline-friendly 'maxstar top-2' circuit that reduces the max-only approximation penalty, a low-latency cyclic redundancy check circuit for window-based decoders, and a high-speed algorithmic polynomial interleaver that leads to memory savings. Using the featured optimizations, we implement a 6.72 megabits-per-second (Mbps) SCPPM decoder on a single field-programmable gate array (FPGA). Compared to the current data rate of 256 kilobits per second from Mars, the SCPPM coded scheme represents a throughput increase of more than twenty-six fold. Extension to a 50-Mbps decoder on a board with multiple FPGAs follows naturally. We show through hardware simulations that the SCPPM coded system can operate within 1 dB of the Shannon capacity at nominal operating conditions.
We discuss use of inertial sensors to facilitate deep space optical communications. Implementation of this concept requires accurate and wide bandwidth inertial sensors. In this presentation, the principal concept and algorithm using linear accelerometers will be given along with the simulation and experimental results.
A series of three experiments proposed for advanced optical deep-space communications is described. These proposed experiments would be carried out aboard the Space Station to test and evaluate the capability of optical instruments to conduct data communication and spacecraft navigation for deep-space missions. Techniques for effective data communication, precision spacecraft ranging, and accurate angular measurements will be developed and evaluated in a spaceborne environment.
NASA’s future deep space science and exploration missions will require enhanced communications and navigation services. Laser communications offers expanded bandwidth and the potential for satisfying this need, with comparable mass and power as state of the art telecommunication systems. Consequently, NASA is planning a Deep Space Optical Communications (DSOC) technology demonstration, to retire the risk for future enhanced optical communication services. NASA’s upcoming Psyche Mission scheduled to launch in August of 2022 plans to host a DSOC flight laser transceiver (FLT) for demonstrating optical links from deep-space to earth. Existing ground assets retrofitted with laser transmitters and photon-counting receivers will be used for the technology demonstration. Advancing optical technology from near-Earth ranges to deep space (> 0.01 astronomical units or AU) involves orders of magnitude increased link difficulty (defined as data-rate squared distance). The plan to bridge the difficulty gap implements new technologies developed over the past two decades. These technologies emphasize high photon efficiency (HPE) with the use of high-peak-to-average power laser transmitters in space, and single photon counting sensitivity detectors, that together support signaling schemes for achieving approximately 23 information bits per detected photon. Implementing HPE schemes relies on accurate and stable pointing of narrow laser beams from space platforms using active control. Key developments needed for future technology infusion, following a successful DSOC technology demonstration, include, cost-effective ground infrastructure, long term reliability of space lasers and detection systems, and solutions for high precision laser ranging. The current status of the DSOC Project and plans for future development will be discussed in this paper.
The technology development, spacecraft systems impact, design examples and overall development plan for optical deep space communications are described. Design examples include moderate distance links like ones from Mars to Earth, out through a potential mission to a distance of 1000 A.U. The technology development plan, which includes both ground-based as well as Earth orbit-based reception considerations, spans the period from 1985 to the year 2003. Past technology developments in high efficiency lasers, optical modulation and coding, and high power efficiency communications techniques at multiple bits of information per detected photon are also discussed.
Since the beginning of the Space Age, NASA has been a leader in developing space communications and navigation technologies— especially during the Apollo missions to the Moon and NASA’s initial foray into deep space. To support future exploration and science needs, NASA is gradually introducing optical communications technologies to augment its radio frequency (RF) systems. Optical communications will enable new science and exploration missions by providing high data rates and better navigation over long distances. NASA has already flown several optical communications demonstrations, including the Lunar Laser Communications Demonstration (LLCD), the Laser Communications Relay Demonstration (LCRD), and the Terabyte Infrared Delivery (TBIRD) system. Historically, NASA has partnered with the Jet Propulsion Laboratory (JPL) and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) to develop optical communications technology. In addition to pursuing optical communications, NASA’s Space Communications and Navigation (SCaN) Program is undergoing a paradigm shift and moving away from government owned and operated networks to using commercial services whenever possible. In partnership with SCaN, NASA’s Space Technology Mission Directorate (STMD) has identified key technologies that need to be developed to support future space communications and navigation, including enhanced RF, optical, and 3rd Generation Partnership (3GPP) cellular capabilities, as well as high-speed networking. This paper briefly describes some current and upcoming optical demonstrations and provides an overview of STMD’s envisioned future for optical communications and navigation in the 2030+ timeframe.
A two-telescope system for a deep space optical communication receiver is proposed. To substantially improve the overall receiver efficiency, the design reserves the large telescope for signal-detection purposes only. A small diffraction-limited telescope is introduced to accomplish the task of navigational tracking.
NASA’s 22 cm diameter Deep Space Optical Communications (DSOC) Transceiver is designed to provide a bi-directional optical link between a spacecraft in the inner solar system and an Earth-based optical ground station. This design, optimized for operation across a wide range of illumination conditions, is focused on minimizing blinding from stray light, and providing reliable, accurate attitude information to point its narrow communication beam accurately to the future location of the ground terminal. Though our transceiver will transmit in the 1550 nm waveband and receive in the 1064 nm waveband, the system design relies heavily on reflective optical elements, extending flexibility to be modified for use at different wavebands. The design makes use of common path propagation among transmit, receive and pointing verification optical channels to maintain precise alignment among its components, and to naturally correct for element misalignment resulting from launch or thermal element perturbations. This paper presents the results of trade studies showing the evolution of the design, unique operational characteristics of the design, elements that help to maintain minimal stray light contamination, and preliminary results from development and initial testing of a functional aluminum test model.
As discussed at SpaceOps in 2016, we expect the data rates from deep space missions to increase approximately one order of magnitude per decade for the next 50 years. The first order of magnitude improvement will come from existing plans for radio frequency (RF) communications including enhancements to both spacecraft and Deep Space Network (DSN) facilities. The next two orders of magnitude are predicted to come from the introduction of deep space optical communications. Studies indicate that optical receive apertures of between 8m12m are desired. The large cost of dedicated receive telescopes makes this method unrealistic – at least in the near-term. The cost of large optical ground terminals is driven primarily by the cost of the optics and by the cost of a stable structure for the telescope. We propose a novel hybrid design in which existing DSN 34m beam waveguide (BWG) radio antennas can be modified to include an 8m equivalent optical primary. By utilizing a low-cost segmented spherical mirror optical design, pioneered by the optical astronomical community, and by exploiting the already existing extremely stable large radio aperture structures in the DSN, we can minimize both of these cost drivers for implementing large optical communications ground terminals. Two collocated hybrid RF/optical antennas could be arrayed to synthesize the performance of an 11.3m receive aperture to support more capable or more distant space missions or used separately to communicate with two optical spacecraft simultaneously. NASA is in the midst of building six new 34m BWG antennas in the DSN. The final two are planned to be built at the DSN Goldstone, California and Canberra complexes. We are now investigating building these last two antennas as RF/optical hybrids. By delaying their operational dates by two years, we would be able to add the 8m optical receive capability for these two antennas while fitting within existing budgetary constraints. This paper describes the hybrid antenna design, the technical challenges being addressed, and plan for using this concept, together with ongoing work on optical flight terminals, to infuse operation optical communications into deep space missions.