Search NASA⌕ Search

SEARCH · Search NASA

Results for “Specific heat measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The anomalous thermal properties of glasses at low temperatures

While experimentally there is great regularity below 1 deg K in the behavior of a particular thermal property for all amorphous dielectrics it is not understood why these properties should differ from those of crystalline dielectrics, since it would seem that at low temperatures long-wavelength elastic waves, similar in both cases, would determine the thermal properties. A model involving systems having very few levels is used in the present study, although the relation between the model's systems and the nature of the glassy state is not known. It is shown, among other effects, that: specific heat measurements above 0.1 K indicate a distribution of local modes independent of energy; ultrasonic velocity measurements give information about phonon-local mode coupling parameters; and thermal expansion and far infrared experiments indicate a phonon-assisted tunneling model.

Pohl, R. O.↗
NASA NTRS2003

A 2-D Piston Effect Solution for the Relaxation in the MISTE Cell

When a large density stratification is no longer a problem in a microgravity environment, one would like to increase the sample size in order to increase the signal-to-noise ratio for a specific heat measurement. To reduce the equilibration time associated with the large sample size, we designed a cylindrical cell containing a stack of plates that separate the bulk fluid into 60 equally thin layers. To understand the thermal behavior of the whole cell, we analyzed the thermal behavior of a 2-D composite system of a cylindrical near-critical fluid layer in contact with a cylindrical copper plate. In this 2-D analysis, the circumference boundary of the two cylindrical layers is subjected to a step temperature change. The solution of this 2-D composite system includes the piston effect that speeds up the equilibration in the near-critical fluid layer and the pure diffusion in the copper plate. The results of this analysis indicate that the characteristic length for the equilibration of the stacked cell is determined by an effective thickness of a single fluid layer instead of the total height of the cylindrical cell.

Weilert, Mark↗
NASA NTRS1992

Thermophysical properties of lysozyme (protein) solutions

Thermophysical properties of protein solutions composed of the lysozyme crystals with a 0.1 M sodium acetate and 5 percent NaCl solution as the buffer (pH = 4.0) are determined. The properties being measured include specific heat, thermal conductivity, dynamic viscosity, and surface tension. The protein concentrations are varied. Thermal diffusivity is calculated using the measured results. The purpose of the research is to measure thermophysical properties of lysozyme solutions which would serve as the data bank for controlling and modeling the crystal growth process on earth as well as in space.

Liu, Jiaching↗
NASA NTRS2003

Studies of Nucleation and Growth, Specific Heat and Viscosity of Undercooled Melts of Quasicrystal and Polytetrahedral-Phase Forming Alloys

From extensive ground based work on the phase diagram and undercooling studies of Ti-Zr-Ni alloys, have clearly identified the composition of three different phases with progressively increasing polytetrahedral order such as, (Ti/Zr), the C14 Laves phase, and the i-phase, that nucleate directly from the undercooled liquid. The reduced undercooling decreases progressively with increasing polytetrahedral order in the solid, supporting Frank s hypothesis. A new facility for direct measurements of the structures and phase transitions in undercooled liquids (BESL) was developed and has provided direct proof of the primary nucleation of a metastable icosahedral phase in some Ti-Zr-Ni alloys. The first measurements of specific heat and viscosity in the undercooled liquid of this alloy system have been completed. Other than the importance of thermo-physical properties for modeling nucleation and growth processes in these materials, these studies have also revealed some interesting new results (such as a maximum of C(sup q, sub p) in the undercooled state). These ground-based results have clearly established the necessary background and the need for conducting benchmark nucleation experiments at the ISS on this alloy system.

Kelton, K. F.↗
NASA NTRS2000

Progress in the development of the MISTE flight experiment

The MISTE flight experiment plans to measure the specific heat at constant volume, C(sub v), and isothermal susceptibility chi(sup tau), near the (sup 3)He liquid-gas critical point. A new method for precisely determining the critical temperature is being evaluated and will be presented.

critical phenomena liquid-gas critical point↗
NASA NTRS1989

Accurate determination of specific heat at high temperatures using the flash diffusivity method

The flash diffusivity method of Parker et al. (1961) was used to measure accurately the specific heat of test samples simultaneously with thermal diffusivity, thus obtaining the thermal conductivity of these materials directly. The accuracy of data obtained on two types of materials (n-type silicon-germanium alloys and niobium), was + or - 3 percent. It is shown that the method is applicable up to at least 1300 K.

Vandersande, J. W.↗
NASA NTRS1990

Magnetic correlations in La(2-x)Sr(x)CuO4 from NQR relaxation and specific heat

La-139 and Cu-63 Nuclear Quadrupole Resonance (NQR) relaxation measurements in La(2-x)Sr(x)CuO4 for O = to or less than 0.3 and in the temperature range 1.6 + 450 K are analyzed in terms of Cu(++) magnetic correlations and dynamics. It is described how the magnetic correlations that would result from Cu-Cu exchange are reduced by mobile charge defects related to x-doping. A comprehensive picture is given which explains satisfactorily the x and T dependence of the correlation time, of the correlation length and of the Neel temperature T(sub n)(x) as well as being consistent with known electrical resistivity and magnetic susceptibility measurements. It is discussed how, in the superconducting samples, the mobile defects also cause the decrease, for T yields T(sub c)(+) of the hyperfine Cu electron-nucleus effective interaction, leading to the coexistence of quasi-localized, reduced magnetic moments from 3d Cu electrons and mobile oxygen p-hole carriers. The temperature dependence of the effective hyperfine field around the superconducting transition yields an activation energy which could be related to the pairing energy. New specific heat measurements are also presented and discussed in terms of the above picture.

Borsa, F.↗
NASA NTRS1982

Thermophysical properties of germanium for thermal analysis of growth from the melt

The thermal diffusivity of Ge has been measured over a temperature range from 300 C to 1010 C which includes values for the melt. Specific heat has been measured from room temperature to 727 C. Thermal conductivity has been calculated over the same temperature range as the diffusivity measurements. These data are reported along with the best values from the literature for the other parameters which are required to calculate the temperature and convective fields for the growth of germanium by the Bridgman method. These parameters include the specific heat, the viscosity, the emissivity, and the density as a function of temperature.

Crouch, R. K.↗
NASA NTRS1982

Ground based studies for the space processing of lead-tin-telluride

This paper summarizes the results of a series of studies dealing with crystal growth from the melt and in particular, the growth of the narrow bandgap semiconductor PbSnTe by the Bridgman technique. Theoretical calculations have shown that for low Prandtl number fluids such as semiconductors, convection has no effect on the temperature field in the melt but has a significant effect on the compositional field. They also show that convective flow will exist in a Bridgman growth system on earth, even in the 'thermally stable' configuration. Measurements of the specific heat have been made up to temperatures of 722 C. The thermal diffusivity has been measured up to 1010 C which includes values for the melt. The interdiffusion coefficients for PbTe and SnTe in the melt have been determined. A technique has been developed and tested which provides a vacuum tight quartz ampoule with electrical feedthroughs for interface demarcation studies during the Bridgman growth. Analysis of crystals grown has indicated that the PbSnTe system is solutally unstable and the distribution of SnTe in the crystal, after an anomalous first to freeze region, follows that predicted by Pfann for convection controlled growth. Studies of the amount of supercooling in PbSnTe indicate that this may explain an anomalous composition distribution in the first to freeze region of an unseeded growth.

Crouch, R. K.↗
NASA NTRS1973

Thermal properties of dielectric solids below 4 K. I - Polycarbonate

Polymers and other dielectric materials are frequently used for many purposes in the construction of cryogenic apparatus. Yet very few values of the thermal properties of these materials below 4 K have been reported. It is, however, known that one can not use the Debye theory to extrapolate to lower temperatures the measurements of the specific heat capacity above 1 K. The thermal conductivity also follows no theoretically predictable temperature dependence. As a by-product of our studies of the thermal properties of amorphous and partly crystalline materials below 4 K, we wish to report values for the thermal conductivity, specific heat capacity, and velocity of sound below 4 K in materials useful for the construction of cryogenic apparatus. In this article we will describe our measurement techniques and report values for polycarbonate (Lexan). In subsequent notes we will give values for other materials of interest.

Cieloszyk, G. S.↗