Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stability Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A code for linear stability analysis

A new spectral code, Linear.x, has been written in FORTRAN 77 for the analysis of the linear stability of some basic state. While being generic and unrelated to any particular physical problem, the code provides for various common tasks, including global (eigenvalue spectra), local (single eigenvalues and eigenfunctions), table (one-dimensional and multidimensional tables of eigenvalues), curve (curves in parameter space), and others. A specific problem can be defined as a set of files some of which are included at compile time, while definitions, tasks, and parameters are read during run time. The code is currently used for the stability analysis of compressible flows.

Herbert, Thorwald↗
NASA NTRS1977

Stability analysis for laminar flow control, part 1

The basic equations for the stability analysis of flow over three dimensional swept wings are developed and numerical methods for their solution are surveyed. The equations for nonlinear stability analysis of three dimensional disturbances in compressible, three dimensional, nonparallel flows are given. Efficient and accurate numerical methods for the solution of the equations of stability theory were surveyed and analyzed.

Benney, D. J.↗
NASA NTRS1982

The Development of a Handbook for Astrobee F Performance and Stability Analysis

An astrobee F performance and stability analysis is presented, for use by the NASA Sounding Rocket Division. The performance analysis provides information regarding altitude, mach number, dynamic pressure, and velocity as functions of time since launch. It is found that payload weight has the greatest effect on performance, and performance prediction accuracy was calculated to remain within 1%. In addition, to assure sufficient flight stability, a predicted rigid-body static margin of at least 8% of the total vehicle length is required. Finally, fin cant angle predictions are given in order to achieve a 2.5 cycle per second burnout roll rate, based on obtaining 75% of the steady roll rate. It is noted that this method can be used by flight performance engineers to create a similar handbook for any sounding rocket series.

Wolf, R. S.↗
NASA NTRS1978

Static and dynamic stability analysis of the space shuttle vehicle-orbiter

The longitudinal static and dynamic stability of a Space Shuttle Vehicle-Orbiter (SSV Orbiter) model is analyzed using the FLEXSTAB computer program. Nonlinear effects are accounted for by application of a correction technique in the FLEXSTAB system; the technique incorporates experimental force and pressure data into the linear aerodynamic theory. A flexible Orbiter model is treated in the static stability analysis for the flight conditions of Mach number 0.9 for rectilinear flight (1 g) and for a pull-up maneuver (2.5 g) at an altitude of 15.24 km. Static stability parameters and structural deformations of the Orbiter are calculated at trim conditions for the dynamic stability analysis, and the characteristics of damping in pitch are investigated for a Mach number range of 0.3 to 1.2. The calculated results for both the static and dynamic stabilities are compared with the available experimental data.

Chyu, W. J.↗
NASA NTRS2015

Robust Stability Analysis of the Space Launch System Control Design: A Singular Value Approach

Classical stability analysis consists of breaking the feedback loops one at a time and determining separately how much gain or phase variations would destabilize the stable nominal feedback system. For typical launch vehicle control design, classical control techniques are generally employed. In addition to stability margins, frequency domain Monte Carlo methods are used to evaluate the robustness of the design. However, such techniques were developed for Single-Input-Single-Output (SISO) systems and do not take into consideration the off-diagonal terms in the transfer function matrix of Multi-Input-Multi-Output (MIMO) systems. Robust stability analysis techniques such as H(sub infinity) and mu are applicable to MIMO systems but have not been adopted as standard practices within the launch vehicle controls community. This paper took advantage of a simple singular-value-based MIMO stability margin evaluation method based on work done by Mukhopadhyay and Newsom and applied it to the SLS high-fidelity dynamics model. The method computes a simultaneous multi-loop gain and phase margin that could be related back to classical margins. The results presented in this paper suggest that for the SLS system, traditional SISO stability margins are similar to the MIMO margins. This additional level of verification provides confidence in the robustness of the control design.

Pei, Jing↗
NASA NTRS1991

Planetary-scale waves in the Southern Hemisphere winter and early spring stratosphere - Stability analysis

A barotropic stability model linearized about a zonally symmetric flow is used to examine the stability characteristics of horizontal zonal-mean flow profiles representative of the Southern Hemisphere middle stratosphere during winter and early spring, with emphasis on periods when planetary wave growth appears confined to the stratosphere. Unstable modes of eastward-travelling waves 2 and 3 are found to have period sand spatial structures, similar to observations. Wave-2 and wave-3 momentum fluxes are similar in observations and model results and are consistent with the transfer of kinetic energy from the zonal-mean flow to the wave. When a barotropic model with a zonally symmetric basic flow is used, wave 3 is usually most unstable. Including a stationary wave 1 in the basic flow destabilizes both wave 2 and wave 3, but has little effect on their periods or spatial structures. The similarity between observed fields and model results in a number of cases when wave 2 appears to grow within the stratosphere suggests that in situ instabilities play a role in the evolution of the eastward-traveling wave-2 characteristic of the Southern Hemisphere winter and early spring stratosphere.

Manney, G. L.↗
NASA NTRS1995

Euler/Navier-Stokes flow computations on flexible configurations for stability analysis

Longitudinal dynamic stability derivatives required for design of aircraft are computed by using the state-of-the-art numerical methods for wing-body configurations. The flow is modeled using the Euler/Navier-Stokes equations with turbulence models and solved using an efficient finite-difference scheme suitable for patched structured grids. Computations are made at a flow regime that is beyond the limits of the current linear methods mostly used for computing stability derivatives. Flow conditions include shockwaves and viscous dominated vortical flows. Effect of Mach number and angle-of-attack on stability derivatives are demonstrated for a typical wing-body configuration. For the same configuration the effects of wing flexibility on the magnitude and phase angles of stability derivatives are also demonstrated.

Guruswamy, G.↗
NASA NTRS1986

Polynomial elimination theory and non-linear stability analysis for the Euler equations

Numerical methods are presented that exploit the polynomial properties of discretizations of the Euler equations. It is noted that most finite difference or finite volume discretizations of the steady-state Euler equations produce a polynomial system of equations to be solved. These equations are solved using classical polynomial elimination theory, with some innovative modifications. This paper also presents some preliminary results of a new non-linear stability analysis technique. This technique is applicable to determining the stability of polynomial iterative schemes. Results are presented for applying the elimination technique to a one-dimensional test case. For this test case, the exact solution is computed in three iterations. The non-linear stability analysis is applied to determine the optimal time step for solving Burgers' equation using the MacCormack scheme. The estimated optimal time step is very close to the time step that arises from a linear stability analysis.

Kennon, S. R.↗
DOE OSTI2018

Active attenuation of a trailing vortex inspired by a parabolized stability analysis

Designing effective control for complex three-dimensional flow fields proves to be non-trivial. Often, intuitive control strategies lead to suboptimal control. To navigate the control space, we use a linear parabolized stability analysis to guide the design of a control scheme for a trailing vortex flow field aft of a NACA0012 half-wing at an angle of attack $\unicode[STIX]{x1D6FC}=5^{\circ }$ and a chord-based Reynolds number $Re=1000$ . The stability results show that the unstable mode with the smallest growth rate (fifth wake mode) provides a pathway to excite a vortex instability, whereas the principal unstable mode does not. Inspired by this finding, we perform direct numerical simulations that excite each mode with body forces matching the shape function from the stability analysis. Furthermore, relative to the uncontrolled case, the controlled flows show increased attenuation of circulation and peak streamwise vorticity, with the fifth-mode-based control set-up outperforming the principal-mode-based set-up. From these results, we conclude that a rudimentary linear stability analysis can provide key insights into the underlying physics and help engineers design effective physics-based flow control strategies.

42 ENGINEERING↗
NASA NTRSDate not supplied

Transonic Correction Method for Flight Dynamic Stability Analysis of Mach 0.745 Transonic Truss-Braced Wing

This paper presents a transonic correction method for obtaining dynamic stability derivatives for flight dynamic stability analysis. The method provides a transonic correction to the Theodorsen's theory of unsteady aerodynamics using FUN3D CFD solver of unsteady Reynolds-averaged Navier-Stokes equations (RANS) for a series of wing sections of the Mach 0.745 Transonic Truss-Braced Wing in pitch and plunge oscillations. Unsteady lift and pitching moment coefficients are obtained and used to develop the correction terms in the Theodorsen's theory to account for transonic aerodynamics. The unsteady lift and pitching moment derivatives with respect to the unsteady angle of attack are obtained as frequency response functions of the reduced frequency. These frequency response functions are used to compute the dynamic stability derivatives of lift and pitching moment due to the angle of attack and pitch rate and the dynamic stability derivatives for the rolling moment and yawing moment with respect to the roll rate and yaw rate. A transonic correction is applied to steady-state stability derivatives computed by VSPAERO solver using transonic small disturbance code TSFOIL coupled to an integral boundary method. A dynamic stability analysis is conducted for longitudinal and lateral-directional motions. Without transonic corrections and dynamic stability derivatives, the analysis indicates an unstable phugoid mode. The transonic correction applied to the steady-state stability derivatives computed by VSPAERO shows a stable phugoid mode. This is due to the increase of the drag stability derivatives as a result of the additional wave drag contribution in transonic flow. The effect of the transonic dynamic stability derivatives is observed to be a significant contributor to the increase in the damping values of all the flight dynamic modes of the Mach 0.745 Transonic-Truss Braced Wing.

Transonic↗
NASA NTRS1973

Liapunov stability analysis of spinning flexible spacecraft.

The attitude stability of a class of spinning flexible spacecraft in a force-free environment is analyzed. The spacecraft is modeled as a rigid core having attached to it a flexible appendage idealized as a collection of elastically interconnected particles. Liapunov stability theorems are employed with the Hamiltonian of the system, constrained through the angular momentum integral so as to admit complete damping, used as a testing function. The Hamiltonian is written in terms of modal coordinates as interpreted by the hybrid coordinate formulation, thus allowing truncation to a level amenable to literal stability analysis. Testing functions are constructed for a spacecraft with an arbitrary (discretized) appendage, and closed form stability criteria are generated for the first mode of a restricted appendage model lying in a plane which contains the center of mass and is orthogonal to the spin axis. The criteria are (except for idealized cases on the stability boundary line in the parameter space) both necessary and sufficient for stability for any spacecraft characterized by the planar appendage model, such as a spacecraft containing solar panels and/or radial booms.

Barbera, F. J.↗
NASA NTRSDate not supplied

Steady and Unsteady Simulations of Transonic Truss-BracedWing Aircraft for Flight Dynamic Stability Analysis

This paper presents steady and unsteady simulations of the Mach 0.8 and Mach 0.745Transonic Truss-Braced Wing (TTBW) aircrafts using the high-fidelity CFD solver FUN3D for the flight dynamic stability analysis. The steady-state stability derivatives with respect to the angle of attack, angle of sideslip, and airspeed are calculated with perturbations in the angle of attack, angle of sideslip, and Mach number, respectively. A series of unsteady CFD simulations conducted for the TTBW aircrafts in pitch oscillation at various reduced frequencies. The dynamic stability derivatives are estimated using a frequency domain estimation method. The results are then compared to the results obtained from the VSPAERO stability analysis.

CFD↗
DOE OSTI2022

A Laplace-Domain Circuit Model for Fault and Stability Analysis Considering Unbalanced Topology

For systems subject to unbalanced faults, analytical model building for stability assessment is a challenging task. This letter presents a straightforward modeling approach. A generalized dynamic circuit representation is achieved by use of the Laplacian transform variable s . Here, we translate the voltage and current relationship at the fault location into the relationship of three subsystems. The final circuit model is an interconnected sequence network with impedances in the Laplace domain. This circuit can be directly converted from a steady-state sequence network. This modeling procedure is illustrated by an example case of an induction motor served by a grid through a series compensated line. Electromagnetic transient simulation results demonstrate that sub-synchronous oscillations can be mitigated when a single-line to ground fault is applied at the motor terminal. Stability analysis results based on the dynamic circuit corroborate the simulation results. What's more, the derived circuit effortlessly reveals why unbalance can enhance stability.

42 ENGINEERING↗
NASA NTRS1987

Stability analysis of two coupled Lorenz lasers and the coupling-induced periodic to chaotic transition

A linear stability analysis of two Lorenz lasers coupled by their electric fields has been performed, and it is shown that the bad cavity condition becomes a function of coupling and that a good cavity instability may occur if the injected fields are inverted before injection. In addition, it is shown that the symmetrically coupled Lorenz system is isomorphic to the original Lorenz system with new parameters. The stability analysis also predicts a lowering of the second laser threshold with coupling for both the chaotic and self-pulsing regimes. Numerical integration of the equations is in agreement with these predictions and has revealed a coupling induced transition from self-pulsing to chaotic behavior. The classification of the behavior of the coupled system in the parameter space of the coupling constants has been investigated and shows that the results of symmetric coupling allow enough of a margin for an experimental test of the theory. This would allow experimentalists to observe the actual Lorenz instability at excitations as low as 4-5 times above threshold.

Lawandy, N. M.↗